commit 6e6c2528 upstream.

kobject_init_and_add() takes reference even when it fails.
Thus, when kobject_init_and_add() returns an error,
kobject_put() must be called to properly clean up the kobject.

Fixes: 3f8055c3 ("ACPI / hotplug: Introduce user space interface for hotplug profiles")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 862b2509 upstream.

When a USB-audio interface gets runtime-suspended via auto-pm feature,
the driver suspends all functionality and increment
chip->num_suspended_intf.  Later on, when the system gets suspended to
S3, the driver increments chip->num_suspended_intf again, skips the
device changes, and sets the card power state to
SNDRV_CTL_POWER_D3hot.  In return, when the system gets resumed from
S3, the resume callback decrements chip->num_suspended_intf.  Since
this refcount is still not zero (it's been runtime-suspended), the
whole resume is skipped.  But there is a small pitfall here.

The problem is that the driver doesn't restore the card power state
after this resume call, leaving it as SNDRV_CTL_POWER_D3hot.  So,
even after the system resume finishes, the card instance still appears
as if it were system-suspended, and this confuses many ioctl accesses
that are blocked unexpectedly.

In details, we have two issues behind the scene: one is that the card
power state is changed only when the refcount becomes zero, and
another is that the prior auto-suspend check is kept in a boolean
flag.  Although the latter problem is almost negligible since the
auto-pm feature is imposed only on the primary interface, but this can
be a potential problem on the devices with multiple interfaces.

This patch addresses those issues by the following:

- Replace chip->autosuspended boolean flag with chip->system_suspend
  counter

- At the first system-suspend, chip->num_suspended_intf is recorded to
  chip->system_suspend

- At system-resume, the card power state is restored when the
  chip->num_suspended_intf refcount reaches to chip->system_suspend,
  i.e. the state returns to the auto-suspended

Also, the patch fixes yet another hidden problem by the code
refactoring along with the fixes above: namely, when some resume
procedure failed, the driver left chip->num_suspended_intf that was
already decreased, and it might lead to the refcount unbalance.
In the new code, the refcount decrement is done after the whole resume
procedure, and the problem is avoided as well.

Fixes: 0662292a ("ALSA: usb-audio: Handle normal and auto-suspend equally")
Reported-and-tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603153709.6293-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d9b8fbf1 upstream.

snd_es968_pnp_detect() misses a snd_card_free() in a failed path.
Add the missed function call to fix it.

Fixes: a20971b2 ("ALSA: Merge es1688 and es968 drivers")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200603092459.1424093-1-hslester96@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d8bd8c6e upstream.

The documentation provided by kobject_init_and_add() clearly spells out
the need to call kobject_put() on the kobject if an error is returned.
Add this missing call to the error path.

Cc: <stable@vger.kernel.org>
Reported-by: 亿一 <teroincn@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 140fd4ac upstream.

On MacBook6,1 reboot would hang unless parameter reboot=pci is added.
Make it automatic.
Signed-off-by: Hill Ma <maahiuzeon@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200425200641.GA1554@cslab.localdomainSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dbbe2ad0 upstream.

On context switch the change of TIF_SSBD and TIF_SPEC_IB are evaluated
to adjust the mitigations accordingly. This is optimized to avoid the
expensive MSR write if not needed.

This optimization is buggy and allows an attacker to shutdown the SSBD
protection of a victim process.

The update logic reads the cached base value for the speculation control
MSR which has neither the SSBD nor the STIBP bit set. It then OR's the
SSBD bit only when TIF_SSBD is different and requests the MSR update.

That means if TIF_SSBD of the previous and next task are the same, then
the base value is not updated, even if TIF_SSBD is set. The MSR write is
not requested.

Subsequently if the TIF_STIBP bit differs then the STIBP bit is updated
in the base value and the MSR is written with a wrong SSBD value.

This was introduced when the per task/process conditional STIPB
switching was added on top of the existing SSBD switching.

It is exploitable if the attacker creates a process which enforces SSBD
and has the contrary value of STIBP than the victim process (i.e. if the
victim process enforces STIBP, the attacker process must not enforce it;
if the victim process does not enforce STIBP, the attacker process must
enforce it) and schedule it on the same core as the victim process. If
the victim runs after the attacker the victim becomes vulnerable to
Spectre V4.

To fix this, update the MSR value independent of the TIF_SSBD difference
and dependent on the SSBD mitigation method available. This ensures that
a subsequent STIPB initiated MSR write has the correct state of SSBD.

[ tglx: Handle X86_FEATURE_VIRT_SSBD & X86_FEATURE_VIRT_SSBD correctly
        and massaged changelog ]

Fixes: 5bfbe3ad ("x86/speculation: Prepare for per task indirect branch speculation control")
Signed-off-by: Anthony Steinhauser <asteinhauser@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1574051e upstream.

The Intel C620 Platform Controller Hub has MROM functions that have non-PCI
registers (undocumented in the public spec) where BAR 0 is supposed to be,
which results in messages like this:

  pci 0000:00:11.0: [Firmware Bug]: reg 0x30: invalid BAR (can't size)

Mark these MROM functions as having non-compliant BARs so we don't try to
probe any of them.  There are no other BARs on these devices.

See the Intel C620 Series Chipset Platform Controller Hub Datasheet,
May 2019, Document Number 336067-007US, sec 2.1, 35.5, 35.6.

[bhelgaas: commit log, add 0xa26d]
Link: https://lore.kernel.org/r/1589513467-17070-1-git-send-email-lixiaochun.2888@163.comSigned-off-by: Xiaochun Lee <lixc17@lenovo.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d8ad6d39 upstream.

'jiffies' and 'jiffies_64' are meant to alias (two different symbols that
share the same address).  Most architectures make the symbols alias to the
same address via a linker script assignment in their
arch/<arch>/kernel/vmlinux.lds.S:

jiffies = jiffies_64;

which is effectively a definition of jiffies.

jiffies and jiffies_64 are both forward declared for all architectures in
include/linux/jiffies.h. jiffies_64 is defined in kernel/time/timer.c.

x86_64 was peculiar in that it wasn't doing the above linker script
assignment, but rather was:
1. defining jiffies in arch/x86/kernel/time.c instead via the linker script.
2. overriding the symbol jiffies_64 from kernel/time/timer.c in
arch/x86/kernel/vmlinux.lds.s via 'jiffies_64 = jiffies;'.

As Fangrui notes:

  In LLD, symbol assignments in linker scripts override definitions in
  object files. GNU ld appears to have the same behavior. It would
  probably make sense for LLD to error "duplicate symbol" but GNU ld
  is unlikely to adopt for compatibility reasons.

This results in an ODR violation (UB), which seems to have survived
thus far. Where it becomes harmful is when;

1. -fno-semantic-interposition is used:

As Fangrui notes:

  Clang after LLVM commit 5b22bcc2b70d
  ("[X86][ELF] Prefer to lower MC_GlobalAddress operands to .Lfoo$local")
  defaults to -fno-semantic-interposition similar semantics which help
  -fpic/-fPIC code avoid GOT/PLT when the referenced symbol is defined
  within the same translation unit. Unlike GCC
  -fno-semantic-interposition, Clang emits such relocations referencing
  local symbols for non-pic code as well.

This causes references to jiffies to refer to '.Ljiffies$local' when
jiffies is defined in the same translation unit. Likewise, references to
jiffies_64 become references to '.Ljiffies_64$local' in translation units
that define jiffies_64.  Because these differ from the names used in the
linker script, they will not be rewritten to alias one another.

2. Full LTO

Full LTO effectively treats all source files as one translation
unit, causing these local references to be produced everywhere.  When
the linker processes the linker script, there are no longer any
references to jiffies_64' anywhere to replace with 'jiffies'.  And
thus '.Ljiffies$local' and '.Ljiffies_64$local' no longer alias
at all.

In the process of porting patches enabling Full LTO from arm64 to x86_64,
spooky bugs have been observed where the kernel appeared to boot, but init
doesn't get scheduled.

Avoid the ODR violation by matching other architectures and define jiffies
only by linker script.  For -fno-semantic-interposition + Full LTO, there
is no longer a global definition of jiffies for the compiler to produce a
local symbol which the linker script won't ensure aliases to jiffies_64.

Fixes: 40747ffa ("asmlinkage: Make jiffies visible")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Reported-by: Alistair Delva <adelva@google.com>
Debugged-by: Nick Desaulniers <ndesaulniers@google.com>
Debugged-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Bob Haarman <inglorion@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # build+boot on
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/852
Link: https://lkml.kernel.org/r/20200602193100.229287-1-inglorion@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 450edd28 ]

Some devices like TP-Link TL-WN722N produces this kind of messages
frequently.

kernel: ath: phy0: Short RX data len, dropping (dlen: 4)

This warning is useful for developers to recognize that the device
(Wi-Fi dongle or USB hub etc) is noisy but not for general users. So
this patch make this warning to debug message.
Reported-By: Denis <pro.denis@protonmail.com>
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=207539
Fixes: cd486e62 ("ath9k_htc: Discard undersized packets")
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200504214443.4485-1-masashi.honma@gmail.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 78468899 ]

VNIC protocol version is reported in big-endian format, but it
is not byteswapped before logging. Fix that, and remove version
comparison as only one protocol version exists at this time.
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 18f855e5 ]

Stefano reported a crash with using SQPOLL with io_uring:

  BUG: kernel NULL pointer dereference, address: 00000000000003b0
  CPU: 2 PID: 1307 Comm: io_uring-sq Not tainted 5.7.0-rc7 #11
  RIP: 0010:task_numa_work+0x4f/0x2c0
  Call Trace:
   task_work_run+0x68/0xa0
   io_sq_thread+0x252/0x3d0
   kthread+0xf9/0x130
   ret_from_fork+0x35/0x40

which is task_numa_work() oopsing on current->mm being NULL.

The task work is queued by task_tick_numa(), which checks if current->mm is
NULL at the time of the call. But this state isn't necessarily persistent,
if the kthread is using use_mm() to temporarily adopt the mm of a task.

Change the task_tick_numa() check to exclude kernel threads in general,
as it doesn't make sense to attempt ot balance for kthreads anyway.
Reported-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/865de121-8190-5d30-ece5-3b097dc74431@kernel.dkSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3866f217 ]

call_undef_hook() in traps.c applies the same instr_mask for both 16-bit
and 32-bit thumb instructions. If instr_mask then is only 16 bits wide
(0xffff as opposed to 0xffffffff), the first half-word of 32-bit thumb
instructions will be masked out. This makes the function match 32-bit
thumb instructions where the second half-word is equal to instr_val,
regardless of the first half-word.

The result in this case is that all undefined 32-bit thumb instructions
with the second half-word equal to 0xde01 (udf #1) work as breakpoints
and will raise a SIGTRAP instead of a SIGILL, instead of just the one
intended 16-bit instruction. An example of such an instruction is
0xeaa0de01, which is unallocated according to Arm ARM and should raise a
SIGILL, but instead raises a SIGTRAP.

This patch fixes the issue by setting all the bits in instr_mask, which
will still match the intended 16-bit thumb instruction (where the
upper half is always 0), but not any 32-bit thumb instructions.

Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit e1de42fd ("crypto: talitos - fix ECB algs ivsize")
wrongly modified CBC algs ivsize instead of ECB aggs ivsize.

This restore the CBC algs original ivsize of removes ECB's ones.

Fixes: e1de42fd ("crypto: talitos - fix ECB algs ivsize")
Signed-off-by: Su Kang Yin <cantona@cantona.net>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e7661a8e upstream.

When instrumenting the SCSI layer to run into the
!blk_rq_nr_phys_segments(rq) case the following warning emitted from the
block layer:

blk_peek_request: bad return=-22

This happens because since commit fd3fc0b4 ("scsi: don't BUG_ON()
empty DMA transfers") we return the wrong error value from
scsi_prep_fn() back to the block layer.

[mkp: silenced checkpatch]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: fd3fc0b4 scsi: don't BUG_ON() empty DMA transfers
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[iwamatsu: - backport for 4.4.y and 4.9.y
    - Use rq->nr_phys_segments instead of blk_rq_nr_phys_segments]
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 8066e6b4 ]

When proxy mode is enabled the vxlan device might reply to Neighbor
Solicitation (NS) messages on behalf of remote hosts.

In case the NS message includes the "Source link-layer address" option
[1], the vxlan device will use the specified address as the link-layer
destination address in its reply.

To avoid an infinite loop, break out of the options parsing loop when
encountering an option with length zero and disregard the NS message.

This is consistent with the IPv6 ndisc code and RFC 4886 which states
that "Nodes MUST silently discard an ND packet that contains an option
with length zero" [2].

[1] https://tools.ietf.org/html/rfc4861#section-4.3
[2] https://tools.ietf.org/html/rfc4861#section-4.6

Fixes: 4b29dba9 ("vxlan: fix nonfunctional neigh_reduce()")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 79a1f0cc ]

Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present.
Previously the checking logic looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol != IPPROTO_TCP)
	break;

After commit b6f61189 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP
was blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;
	break;
else
	break;

Then after commit 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation")
UDP/UDPLITE were blocked as the logic changed to:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;

if (sk->sk_protocol != IPPROTO_TCP)
	break;

Fix it by using Eric's code and simply remove the break in TCP check, which
looks like:
if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE)
	do_some_check;
else if (sk->sk_protocol == IPPROTO_TCP)
	do_some_check;
else
	break;

Fixes: 82c9ae44 ("ipv6: fix restrict IPV6_ADDRFORM operation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 013b2deb upstream.

uprobe_write_opcode() must not cross page boundary; prepare_uprobe()
relies on arch_uprobe_analyze_insn() which should validate "vaddr" but
some architectures (csky, s390, and sparc) don't do this.

We can remove the BUG_ON() check in prepare_uprobe() and validate the
offset early in __uprobe_register(). The new IS_ALIGNED() check matches
the alignment check in arch_prepare_kprobe() on supported architectures,
so I think that all insns must be aligned to UPROBE_SWBP_INSN_SIZE.

Another problem is __update_ref_ctr() which was wrong from the very
beginning, it can read/write outside of kmap'ed page unless "vaddr" is
aligned to sizeof(short), __uprobe_register() should check this too.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ check for ref_ctr_offset removed for backport - gregkh ]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 18dfb532 ]

The bytes returned by the i2c reading need to be swapped
unconditionally. Otherwise, on be16 platforms, an incorrect value will be
returned.

Taking the slow path via next merge window as its been around a while
and we have a patch set dependent on this which would be held up.

Fixes: 62a1efb9 ("iio: add vcnl4000 combined ALS and proximity sensor")
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 3798cc4d upstream

Make the docs match the code.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7222a1b5 upstream

Add documentation for the SRBDS vulnerability and its mitigation.

 [ bp: Massage.
   jpoimboe: sysfs table strings. ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7e5b3c26 upstream

SRBDS is an MDS-like speculative side channel that can leak bits from the
random number generator (RNG) across cores and threads. New microcode
serializes the processor access during the execution of RDRAND and
RDSEED. This ensures that the shared buffer is overwritten before it is
released for reuse.

While it is present on all affected CPU models, the microcode mitigation
is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the
cases where TSX is not supported or has been disabled with TSX_CTRL.

The mitigation is activated by default on affected processors and it
increases latency for RDRAND and RDSEED instructions. Among other
effects this will reduce throughput from /dev/urandom.

* Enable administrator to configure the mitigation off when desired using
  either mitigations=off or srbds=off.

* Export vulnerability status via sysfs

* Rename file-scoped macros to apply for non-whitelist table initializations.

 [ bp: Massage,
   - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g,
   - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in,
   - flip check in cpu_set_bug_bits() to save an indentation level,
   - reflow comments.
   jpoimboe: s/Mitigated/Mitigation/ in user-visible strings
   tglx: Dropped the fused off magic for now
 ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 93920f61 upstream

To make cpu_matches() reusable for other matching tables, have it take a
pointer to a x86_cpu_id table as an argument.

 [ bp: Flip arguments order. ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9d71445 upstream

Intel uses the same family/model for several CPUs. Sometimes the
stepping must be checked to tell them apart.

On x86 there can be at most 16 steppings. Add a steppings bitmask to
x86_cpu_id and a X86_MATCH_VENDOR_FAMILY_MODEL_STEPPING_FEATURE macro
and support for matching against family/model/stepping.

 [ bp: Massage.
   tglx: Lightweight variant for backporting ]
Signed-off-by: Mark Gross <mgross@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 8d9eb0d6 upstream.

qfprom has different address spaces for read and write. Reads are
always done from corrected address space, where as writes are done
on raw address space.
Writing to corrected address space is invalid and ignored, so it
does not make sense to have this support in the driver which only
supports corrected address space regions at the moment.

Fixes: 4ab11996 ("nvmem: qfprom: Add Qualcomm QFPROM support.")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200522113341.7728-1-srinivas.kandagatla@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 15ea976a upstream.

The value in shared headers was fixed 9 years ago in commit 8d661f1e
("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and
while looking at using shared headers for other duplicated constants
I noticed this driver uses the old value.

The macros are also defined twice in this file so I am deleting the
second definition.
Signed-off-by: Pascal Terjan <pterjan@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200523211247.23262-1-pterjan@google.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 24eb2377 upstream.

hvc_open sets tty->driver_data to NULL when open fails at some point.
Typically, the failure happens in hp->ops->notifier_add(). If there is
a racing process which tries to open such mangled tty, which was not
closed yet, the process will crash in hvc_open as tty->driver_data is
NULL.

All this happens because close wants to know whether open failed or not.
But ->open should not NULL this and other tty fields for ->close to be
happy. ->open should call tty_port_set_initialized(true) and close
should check by tty_port_initialized() instead. So do this properly in
this driver.

So this patch removes these from ->open:
* tty_port_tty_set(&hp->port, NULL). This happens on last close.
* tty->driver_data = NULL. Dtto.
* tty_port_put(&hp->port). This happens in shutdown and until now, this
  must have been causing a reference underflow, if I am not missing
  something.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: Raghavendra <rananta@codeaurora.org>
Link: https://lore.kernel.org/r/20200526145632.13879-1-jslaby@suse.czSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b86dab05 upstream.

When k_ascii is invoked several times in a row there is a potential for
signed integer overflow:

UBSAN: Undefined behaviour in drivers/tty/vt/keyboard.c:888:19 signed integer overflow:
10 * 1111111111 cannot be represented in type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.6.11 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xce/0x128 lib/dump_stack.c:118
 ubsan_epilogue+0xe/0x30 lib/ubsan.c:154
 handle_overflow+0xdc/0xf0 lib/ubsan.c:184
 __ubsan_handle_mul_overflow+0x2a/0x40 lib/ubsan.c:205
 k_ascii+0xbf/0xd0 drivers/tty/vt/keyboard.c:888
 kbd_keycode drivers/tty/vt/keyboard.c:1477 [inline]
 kbd_event+0x888/0x3be0 drivers/tty/vt/keyboard.c:1495

While it can be worked around by using check_mul_overflow()/
check_add_overflow(), it is better to introduce a separate flag to
signal that number pad is being used to compose a symbol, and
change type of the accumulator from signed to unsigned, thus
avoiding undefined behavior when it overflows.
Reported-by: Kyungtae Kim <kt0755@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200525232740.GA262061@dtor-wsSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e4befc12 upstream.

When copy_from_user() returns an error code, there
is a runtime PM usage counter imbalance.

Fix this by moving copy_from_user() to the beginning
of this function.

Fixes: 7b6c1b4c ("usb: musb: fix runtime PM in debugfs")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Link: https://lore.kernel.org/r/20200525025049.3400-7-b-liu@ti.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 399ad947 upstream.

Add Telit LE910C1-EUX compositions:

	0x1031: tty, tty, tty, rmnet
	0x1033: tty, tty, tty, ecm
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 986c1748 upstream.

usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb
status is a fatal error. Or the usb controller would keep processing the
new urbs then run into interrupt storm, and has no chance to recover.

Fixes: 6c1ee66a ("USB-Serial: Fix error handling of usb_wwan")
Cc: stable@vger.kernel.org
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3429444a upstream.

Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode /
QDL download mode) to drivers/usb/serial/qcserial.c

This is required to update device firmware.
Signed-off-by: Matt Jolly <Kangie@footclan.ninja>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d9a81a22 ]

syzbot was able to trigger a crash after using an ISDN socket
and fool l2tp.

Fix this by making sure the UDP socket is of the proper family.

BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
Write of size 1 at addr ffff88808ed0c590 by task syz-executor.5/3018

CPU: 0 PID: 3018 Comm: syz-executor.5 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x188/0x20d lib/dump_stack.c:118
 print_address_description.constprop.0.cold+0xd3/0x413 mm/kasan/report.c:382
 __kasan_report.cold+0x20/0x38 mm/kasan/report.c:511
 kasan_report+0x33/0x50 mm/kasan/common.c:625
 setup_udp_tunnel_sock+0x465/0x540 net/ipv4/udp_tunnel.c:78
 l2tp_tunnel_register+0xb15/0xdd0 net/l2tp/l2tp_core.c:1523
 l2tp_nl_cmd_tunnel_create+0x4b2/0xa60 net/l2tp/l2tp_netlink.c:249
 genl_family_rcv_msg_doit net/netlink/genetlink.c:673 [inline]
 genl_family_rcv_msg net/netlink/genetlink.c:718 [inline]
 genl_rcv_msg+0x627/0xdf0 net/netlink/genetlink.c:735
 netlink_rcv_skb+0x15a/0x410 net/netlink/af_netlink.c:2469
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:746
 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline]
 netlink_unicast+0x537/0x740 net/netlink/af_netlink.c:1329
 netlink_sendmsg+0x882/0xe10 net/netlink/af_netlink.c:1918
 sock_sendmsg_nosec net/socket.c:652 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:672
 ____sys_sendmsg+0x6e6/0x810 net/socket.c:2352
 ___sys_sendmsg+0x100/0x170 net/socket.c:2406
 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2439
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x45ca29
Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007effe76edc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004fe1c0 RCX: 000000000045ca29
RDX: 0000000000000000 RSI: 0000000020000240 RDI: 0000000000000005
RBP: 000000000078bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 000000000000094e R14: 00000000004d5d00 R15: 00007effe76ee6d4

Allocated by task 3018:
 save_stack+0x1b/0x40 mm/kasan/common.c:49
 set_track mm/kasan/common.c:57 [inline]
 __kasan_kmalloc mm/kasan/common.c:495 [inline]
 __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:468
 __do_kmalloc mm/slab.c:3656 [inline]
 __kmalloc+0x161/0x7a0 mm/slab.c:3665
 kmalloc include/linux/slab.h:560 [inline]
 sk_prot_alloc+0x223/0x2f0 net/core/sock.c:1612
 sk_alloc+0x36/0x1100 net/core/sock.c:1666
 data_sock_create drivers/isdn/mISDN/socket.c:600 [inline]
 mISDN_sock_create+0x272/0x400 drivers/isdn/mISDN/socket.c:796
 __sock_create+0x3cb/0x730 net/socket.c:1428
 sock_create net/socket.c:1479 [inline]
 __sys_socket+0xef/0x200 net/socket.c:1521
 __do_sys_socket net/socket.c:1530 [inline]
 __se_sys_socket net/socket.c:1528 [inline]
 __x64_sys_socket+0x6f/0xb0 net/socket.c:1528
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

Freed by task 2484:
 save_stack+0x1b/0x40 mm/kasan/common.c:49
 set_track mm/kasan/common.c:57 [inline]
 kasan_set_free_info mm/kasan/common.c:317 [inline]
 __kasan_slab_free+0xf7/0x140 mm/kasan/common.c:456
 __cache_free mm/slab.c:3426 [inline]
 kfree+0x109/0x2b0 mm/slab.c:3757
 kvfree+0x42/0x50 mm/util.c:603
 __free_fdtable+0x2d/0x70 fs/file.c:31
 put_files_struct fs/file.c:420 [inline]
 put_files_struct+0x248/0x2e0 fs/file.c:413
 exit_files+0x7e/0xa0 fs/file.c:445
 do_exit+0xb04/0x2dd0 kernel/exit.c:791
 do_group_exit+0x125/0x340 kernel/exit.c:894
 get_signal+0x47b/0x24e0 kernel/signal.c:2739
 do_signal+0x81/0x2240 arch/x86/kernel/signal.c:784
 exit_to_usermode_loop+0x26c/0x360 arch/x86/entry/common.c:161
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:279 [inline]
 do_syscall_64+0x6b1/0x7d0 arch/x86/entry/common.c:305
 entry_SYSCALL_64_after_hwframe+0x49/0xb3

The buggy address belongs to the object at ffff88808ed0c000
 which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 1424 bytes inside of
 2048-byte region [ffff88808ed0c000, ffff88808ed0c800)
The buggy address belongs to the page:
page:ffffea00023b4300 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002838208 ffffea00015ba288 ffff8880aa000e00
raw: 0000000000000000 ffff88808ed0c000 0000000100000001 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88808ed0c480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff88808ed0c500: 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88808ed0c580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
                         ^
 ffff88808ed0c600: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88808ed0c680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

Fixes: 6b9f3423 ("l2tp: fix races in tunnel creation")
Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Guillaume Nault <gnault@redhat.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 7e0afbdf ]

The accept(2) is an "input" socket interface, so we should use
SO_RCVTIMEO instead of SO_SNDTIMEO to set the timeout.

So this patch replace sock_sndtimeo() with sock_rcvtimeo() to
use the right timeout in the vsock_accept().

Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3decabdc ]

st21nfca_tm_send_atr_res() misses to call kfree_skb() in an error path.
Add the missed function call to fix it.

Fixes: 1892bf84 ("NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target mode")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 591612aa ]

Add support for Telit LE910C1-EUX composition

0x1031: tty, tty, tty, rmnet
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 02c71b14 ]

syzbot recently found a way to crash the kernel [1]

Issue here is that inet_hash() & inet_unhash() are currently
only meant to be used by TCP & DCCP, since only these protocols
provide the needed hashinfo pointer.

L2TP uses a single list (instead of a hash table)

This old bug became an issue after commit 61023658
("bpf: Add new cgroup attach type to enable sock modifications")
since after this commit, sk_common_release() can be called
while the L2TP socket is still considered 'hashed'.

general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 0 PID: 7063 Comm: syz-executor654 Not tainted 5.7.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 sk_common_release+0xba/0x370 net/core/sock.c:3210
 inet_create net/ipv4/af_inet.c:390 [inline]
 inet_create+0x966/0xe00 net/ipv4/af_inet.c:248
 __sock_create+0x3cb/0x730 net/socket.c:1428
 sock_create net/socket.c:1479 [inline]
 __sys_socket+0xef/0x200 net/socket.c:1521
 __do_sys_socket net/socket.c:1530 [inline]
 __se_sys_socket net/socket.c:1528 [inline]
 __x64_sys_socket+0x6f/0xb0 net/socket.c:1528
 do_syscall_64+0xf6/0x7d0 arch/x86/entry/common.c:295
 entry_SYSCALL_64_after_hwframe+0x49/0xb3
RIP: 0033:0x441e29
Code: e8 fc b3 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdce184148 EFLAGS: 00000246 ORIG_RAX: 0000000000000029
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000441e29
RDX: 0000000000000073 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000402c30 R14: 0000000000000000 R15: 0000000000000000
Modules linked in:
---[ end trace 23b6578228ce553e ]---
RIP: 0010:inet_unhash+0x11f/0x770 net/ipv4/inet_hashtables.c:600
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e dd 04 00 00 48 8d 7d 08 44 8b 73 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 55 05 00 00 48 8d 7d 14 4c 8b 6d 08 48 b8 00 00
RSP: 0018:ffffc90001777d30 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: ffff88809a6df940 RCX: ffffffff8697c242
RDX: 0000000000000001 RSI: ffffffff8697c251 RDI: 0000000000000008
RBP: 0000000000000000 R08: ffff88809f3ae1c0 R09: fffffbfff1514cc1
R10: ffffffff8a8a6607 R11: fffffbfff1514cc0 R12: ffff88809a6df9b0
R13: 0000000000000007 R14: 0000000000000000 R15: ffffffff873a4d00
FS:  0000000001d2b880(0000) GS:ffff8880ae600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000006cd090 CR3: 000000009403a000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 0d76751f ("l2tp: Add L2TPv3 IP encapsulation (no UDP) support")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Reported-by: syzbot+3610d489778b57cc8031@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1b49cd71 ]

When devinet_sysctl_register() failed, the memory allocated
in neigh_parms_alloc() should be freed.

Fixes: 20e61da7 ("ipv4: fail early when creating netdev named all or default")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 11e7a919 upstream.

The problem is that we always copy a minimum of ETH_ZLEN (60) bytes from
skb->data even when skb->len is less than ETH_ZLEN so it leads to a read
overflow.

The fix is to pad skb->data to at least ETH_ZLEN bytes.

Cc: <stable@vger.kernel.org>
Reported-by: Hu Jiahui <kirin.say@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200527184830.GA1164846@mwandaSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 17c7d35f upstream.

In queuecommand path, if DMA map fails, it bails out with clock held.  In
this case, release the clock to keep its usage paired.

[mkp: applied by hand]

Link: https://lore.kernel.org/r/0101016ed3d66395-1b7e7fce-b74d-42ca-a88a-4db78b795d3b-000000@us-west-2.amazonses.comReviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
[EB: resolved cherry-pick conflict caused by newer kernels not having
 the clear_bit_unlock() line]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>