The checks for sources to have unique IDs has been removed - this is now
guaranteed by the ID allocation mechanisms, and inappropriate where
multiple ID maps are in use in larger systems
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-3-mike.leach@linaro.org

The existing mechanism to assign Trace ID values to sources is limited
and does not scale for larger multicore / multi trace source systems.

The API introduces functions that reserve IDs based on availabilty
represented by a coresight_trace_id_map structure. This records the
used and free IDs in a bitmap.

CPU bound sources such as ETMs use the coresight_trace_id_get_cpu_id
coresight_trace_id_put_cpu_id pair of functions. The API will record
the ID associated with the CPU. This ensures that the same ID will be
re-used while perf events are active on the CPU. The put_cpu_id function
will pend release of the ID until all perf cs_etm sessions are complete.

For backward compatibility the functions will attempt to use the same
CPU IDs as the legacy system would have used if these are still available.

Non-cpu sources, such as the STM can use coresight_trace_id_get_system_id /
coresight_trace_id_put_system_id.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[ Fix checkpatch warning in drivers/hwtracing/coresight/coresight-trace-id.c ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230116124928.5440-2-mike.leach@linaro.org

Add missing entries for the perf userspace part of this driver.
Also add Jonathan as the maintainer for his expertise on this
driver and PCIe stuffs.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-2-yangyicong@huawei.com

The PTT device can only support the devices on the same PCIe core,
within BDF range [lower_bdf, upper_bdf]. It's not correct to assume
the devices on the root bus are from the same PCIe core, there are
cases that root ports from different PCIe core are sharing the same
bus. So check when initializing the filters list.

Fixes: ff0de066 ("hwtracing: hisi_ptt: Add trace function support for HiSilicon PCIe Tune and Trace device")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230112112201.16283-1-yangyicong@huawei.com

platform_get_resource() returns NULL pointer not PTR_ERR(), replace
the IS_ERR() check with NULL pointer check.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230118074920.1772141-1-yangyingliang@huawei.com

Bring in documentation for UltraSoc SMB driver.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-3-hejunhao3@huawei.com

Add driver for UltraSoc SMB(System Memory Buffer) device.
SMB provides a way to buffer messages from ETM, and store
these "CPU instructions trace" in system memory.
The SMB device is identifier as ACPI HID "HISI03A1". Device
system memory address resources are allocated using the _CRS
method and buffer modes is the circular buffer mode.

SMB is developed by UltraSoc technology, which is acquired by
Siemens, and we still use "UltraSoc" to name driver.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Tested-by: JunHao He <hejunhao3@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114101302.62320-2-hejunhao3@huawei.com

enable_req_count is only ever accessed inside the spinlock, so to avoid
confusion that there are concurrent accesses and simplify the code,
change it to an int.

One access outside of the spinlock is in enable_show() which appears to
allow partially written data to be displayed between enable_req_count,
powered and enabled so move this one inside the spin lock too.
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-4-james.clark@arm.com

In commit 6746eae4 ("coresight: cti: Fix hang in cti_disable_hw()")
PM runtime calls are removed from cti_enable_hw/cti_disable_hw. When
enabling CTI by writing enable sysfs node, clock for accessing CTI
register won't be enabled. Device will crash due to register access
issue. Add PM runtime call in enable_store to fix this issue.

Fixes: 6746eae4 ("coresight: cti: Fix hang in cti_disable_hw()")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
[Change to only call pm_runtime_put if a disable happened]
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-3-james.clark@arm.com

Writing 0 to the enable control repeatedly results in a negative value
for enable_req_count. After this, writing 1 to the enable control
appears to not work until the count returns to positive.

Change it so that it's impossible for enable_req_count to be < 0.
Return an error to indicate that the disable request was invalid.

Fixes: 835d722b ("coresight: cti: Initial CoreSight CTI Driver")
Tested-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230110110736.2709917-2-james.clark@arm.com

The TRCSEQRSTEVR and TRCSEQSTR registers are not implemented if the
TRCIDR5.NUMSEQSTATE == 0. Skip accessing the registers in such cases.

Fixes: 2e1cdfe1 ("coresight-etm4x: Adding CoreSight ETM4x driver")
Signed-off-by: Junhao He <hejunhao3@huawei.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230114091632.60095-1-hejunhao3@huawei.com

Pull perf fixes from Borislav Petkov:

 - Pass only an initialized perf event attribute to the LSM hook

 - Fix a use-after-free on the perf syscall's error path

 - A potential integer overflow fix in amd_core_pmu_init()

 - Fix the cgroup events tracking after the context handling rewrite

 - Return the proper value from the inherit_event() function on error

* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Call LSM hook after copying perf_event_attr
  perf: Fix use-after-free in error path
  perf/x86/amd: fix potential integer overflow on shift of a int
  perf/core: Fix cgroup events tracking
  perf core: Return error pointer if inherit_event() fails to find pmu_ctx

Pull x86 fixes from Borislav Petkov:

 - Two fixes to correct how kprobes handles INT3 now that they're added
   by other functionality like the rethunks and not only kgdb

 - Remove __init section markings of two functions which are referenced
   by a function in the .text section

* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
  x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
  x86/calldepth: Fix incorrect init section references

Pull locking fixes from Borislav Petkov:

 - Prevent the leaking of a debug timer in futex_waitv()

 - A preempt-RT mutex locking fix, adding the proper acquire semantics

* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
  rtmutex: Add acquire semantics for rtmutex lock acquisition slow path

Pull drm fixes from Daniel Vetter:
 "I'm just back from the mountains, and Dave is out at the beach and
  should be back in a week again. Just i915 fixes and since Rodrigo
  bothered to make the pull last week I figured I should warm up gpg and
  forward this in a nice signed tag as a new years present!

   - i915 fixes for newer platforms

   - i915 locking rework to not give up in vm eviction fallback path too
     early"

* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
  drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
  drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
  drm/i915/uc: Fix two issues with over-size firmware files
  drm/i915: improve the catch-all evict to handle lock contention
  drm/i915: Remove __maybe_unused from mtl_info
  drm/i915: fix TLB invalidation for Gen12.50 video and compute engines

Merge tag 'drm-intel-fixes-2022-12-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com

Merge tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix broken BuildID

 - Add srcrpm-pkg to the help message

 - Fix the option order for modpost built with musl libc

 - Fix the build dependency of rpm-pkg for openSUSE

* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  fixdep: remove unneeded <stdarg.h> inclusion
  kbuild: sort single-targets alphabetically again
  kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
  kbuild: Fix running modpost with musl libc
  kbuild: add a missing line for help message
  .gitignore: ignore *.rpm
  arch: fix broken BuildID for arm64 and riscv
  kconfig: Add static text for search information in help menu

Pull ata fix from Damien Le Moal:
 "A single fix to address an issue with wake from suspend with PCS
  adapters, from Adam"

* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Fix PCS quirk application for suspend

Pull ACPI fixes from Rafael Wysocki:
 "These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
  support adjustments and ACPI backlight handling fixes, mostly for
  platforms using AMD chips.

  Specifics:

   - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
     14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
     Schumacher).

   - Adjust ACPI video detection fallback path to prevent
     non-operational ACPI backlight devices from being created on
     systems where the native driver does not detect a suitable panel
     (Mario Limonciello).

   - Fix Apple GMUX backlight detection (Hans de Goede).

   - Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
     and stop using AMD-specific low-power S0 idle code path for systems
     with Rembrandt chips and newer (Mario Limonciello)"

* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
  ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Pull sound fixes from Takashi Iwai:
 "Just a few small fixes:

   - A regression fix for HDMI audio on HD-audio AMD codecs

   - Fixes for LINE6 MIDI handling

   - HD-audio quirk for Dell laptops"

* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
  ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
  ALSA: line6: fix stack overflow in line6_midi_transmit
  ALSA: line6: correct midi status byte when receiving data from podxt

Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:

 - Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
   14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund,  Erik
   Schumacher).

 - Adjust ACPI video detection fallback path to prevent non-operational
   ACPI backlight devices from being created on systems where the native
   driver does not detect a suitable panel (Mario Limonciello).

 - Fix Apple GMUX backlight detection (Hans de Goede).

* acpi-resource:
  ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
  ACPI: resource: do IRQ override on Lenovo 14ALC7
  ACPI: resource: do IRQ override on XMG Core 15

* acpi-video:
  ACPI: video: Fix Apple GMUX backlight detection
  ACPI: video: Don't enable fallback path for creating ACPI backlight by default
  drm/amd/display: Report to ACPI video if no panels were found
  ACPI: video: Allow GPU drivers to report no panels

Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.

Fixes: 963bbdb3 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.

MIPI sequence v4 also adds a flag to fall back to non-native sequences.

v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
  too (Ville)
- References instead of Closes issue 6131 because this does not fix everything

v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)

v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)

v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

This is unneeded since commit 69304379 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>

Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.

Add it as an alternative package.

BTW, if it is impossible to solve the build requirement, the final
resort would be:

    $ make RPMOPTS=--nodeps rpm-pkg

This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.

NOTE1:
  Likewise, it is possible to bypass the build dependency check for
  debian package builds:

    $ make DPKG_FLAGS=-d deb-pkg

NOTE2:
  The 'or' operator is supported since RPM 4.13. So, old distros such
  as CentOS 7 will break. I suggest installing newer rpmbuild in such
  cases.

Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>

commit 3d57e1b7 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:

  make -f ./scripts/Makefile.modpost
     scripts/mod/modpost   -E   -o Module.symvers vmlinux.o -T modules.order
  -T: No such file or directory
  make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
  make: *** [Makefile:1960: modpost] Error 2

The fix is to move all options before 'vmlinux.o' in modpost-args.

Fixes: 3d57e1b7 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1 ("arm64: remove special treatment for the
link order of head.o").

The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.

Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.

While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.

Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.

Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1 ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>

In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.

Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.

Fixes: 01624116 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit 4071d98b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.

v2 (Mani)
  - Also revamp the docs for the different passes.

Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes: 7e00897b ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit 801fa7a8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.

Fixes: 78353039 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit 50490ce0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.

Fixes: 77fa9efc ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit 4d5cf7b1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Pull block fixes from Jens Axboe:
 "Mostly just NVMe, but also a single fixup for BFQ for a regression
  that happened during the merge window. In detail:

   - NVMe pull requests via Christoph:
      - Fix doorbell buffer value endianness (Klaus Jensen)
      - Fix Linux vs NVMe page size mismatch (Keith Busch)
      - Fix a potential use memory access beyong the allocation limit
        (Keith Busch)
      - Fix a multipath vs blktrace NULL pointer dereference (Yanjun
        Zhang)
      - Fix various problems in handling the Command Supported and
        Effects log (Christoph Hellwig)
      - Don't allow unprivileged passthrough of commands that don't
        transfer data but modify logical block content (Christoph
        Hellwig)
      - Add a features and quirks policy document (Christoph Hellwig)
      - Fix some really nasty code that was correct but made smatch
        complain (Sagi Grimberg)

   - Use-after-free regression in BFQ from this merge window (Yu)"

* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
  nvme-auth: fix smatch warning complaints
  nvme: consult the CSE log page for unprivileged passthrough
  nvme: also return I/O command effects from nvme_command_effects
  nvmet: don't defer passthrough commands with trivial effects to the workqueue
  nvmet: set the LBCC bit for commands that modify data
  nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
  nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
  docs, nvme: add a feature and quirk policy document
  nvme-pci: update sqsize when adjusting the queue depth
  nvme: fix setting the queue depth in nvme_alloc_io_tag_set
  block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
  nvme: fix multipath crash caused by flush request when blktrace is enabled
  nvme-pci: fix page size checks
  nvme-pci: fix mempool alloc size
  nvme-pci: fix doorbell buffer value endianness

Pull io_uring fixes from Jens Axboe:

 - Two fixes for mutex grabbing when the task state is != TASK_RUNNING
   (me)

 - Check for invalid opcode in io_uring_register() a bit earlier, to
   avoid going through the quiesce machinery just to return -EINVAL
   later in the process (me)

 - Fix for the uapi io_uring header, skipping including time_types.h
   when necessary (Stefan)

* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
  uapi:io_uring.h: allow linux/time_types.h to be skipped
  io_uring: check for valid register opcode earlier
  io_uring/cancel: re-grab ctx mutex after finishing wait
  io_uring: finish waiting before flushing overflow entries

Merge tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit fix from Shuah Khan:

 - alloc_string_stream_fragment() error path fix to free before
   returning a failure.

* tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: alloc_string_stream_fragment error handling bug fix

Pull kvm fixes from Paolo Bonzini:
 "Changes that were posted too late for 6.1, or after the release.

  x86:

   - several fixes to nested VMX execution controls

   - fixes and clarification to the documentation for Xen emulation

   - do not unnecessarily release a pmu event with zero period

   - MMU fixes

   - fix Coverity warning in kvm_hv_flush_tlb()

  selftests:

   - fixes for the ucall mechanism in selftests

   - other fixes mostly related to compilation with clang"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
  KVM: selftests: restore special vmmcall code layout needed by the harness
  Documentation: kvm: clarify SRCU locking order
  KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
  KVM: x86/xen: Documentation updates and clarifications
  KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
  KVM: x86/xen: Simplify eventfd IOCTLs
  KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
  KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
  KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
  KVM: Delete extra block of "};" in the KVM API documentation
  kvm: x86/mmu: Remove duplicated "be split" in spte.h
  kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
  MAINTAINERS: adjust entry after renaming the vmx hyperv files
  KVM: selftests: Mark correct page as mapped in virt_map()
  KVM: arm64: selftests: Don't identity map the ucall MMIO hole
  KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
  KVM: selftests: Use magic value to signal ucall_alloc() failure
  KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
  KVM: selftests: Include lib.mk before consuming $(CC)
  KVM: selftests: Explicitly disable builtins for mem*() overrides
  ...

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.2

 - fix various problems in handling the Command Supported and Effects log
   (Christoph Hellwig)
 - don't allow unprivileged passthrough of commands that don't transfer
   data but modify logical block content (Christoph Hellwig)
 - add a features and quirks policy document (Christoph Hellwig)
 - fix some really nasty code that was correct but made smatch complain
   (Sagi Grimberg)"

* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
  nvme-auth: fix smatch warning complaints
  nvme: consult the CSE log page for unprivileged passthrough
  nvme: also return I/O command effects from nvme_command_effects
  nvmet: don't defer passthrough commands with trivial effects to the workqueue
  nvmet: set the LBCC bit for commands that modify data
  nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
  nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
  docs, nvme: add a feature and quirk policy document