- 24 Apr, 2020 4 commits
-
-
Alain Volmat authored
[ Upstream commit f491c668 ] Fix a missing struct parameter description to allow warning free W=1 compilation. Signed-off-by:
Alain Volmat <avolmat@me.com> Reviewed-by:
Patrice Chotard <patrice.chotard@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xu Wang authored
[ Upstream commit bcaeb886 ] In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Zheng Wei authored
[ Upstream commit b317538c ] printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix, it causes a build error when there is no variable arguments(e.g. only fmt is specified.). Signed-off-by:
Zheng Wei <wei.zheng@vivo.com> Signed-off-by:
-
Ondrej Jirman authored
[ Upstream commit a43ab30d ] When doing a 16-bit read that returns data in the MSB byte, the RSB_DATA register will keep the MSB byte unchanged when doing the following 8-bit read. sunxi_rsb_read() will then return a result that contains high byte from 16-bit read mixed with the 8-bit result. The consequence is that after this happens the PMIC's regmap will look like this: (0x33 is the high byte from the 16-bit read) % cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers 00: 33 01: 33 02: 33 03: 33 04: 33 05: 33 06: 33 07: 33 08: 33 09: 33 0a: 33 0b: 33 0c: 33 0d: 33 0e: 33 [snip] Fix this by masking the result of the read with the correct mask based on the size of the read. There are no 16-bit users in the mainline kernel, so this doesn't need to get into the stable tree. Signed-off-by:
Ondrej Jirman <megous@megous.com> Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Signed-off-by:
-
- 13 Apr, 2020 34 commits
-
-
Greg Kroah-Hartman authored
-
Rob Clark authored
commit 3de433c5 upstream. [subject was: drm/msm: shake fist angrily at dma-mapping] So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but it falls appart with dma direct ops. The problem is that, depending on display generation, we can have either set of dma ops (mdp4 and dpu have iommu wired to mdss node, which maps to toplevel drm device, but mdp5 has iommu wired up to the mdp sub-node within mdss). Fixes this splat on mdp5 devices: Unable to handle kernel paging request at virtual address ffffffff80000000 Mem abort info: ESR = 0x96000144 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000144 CM = 1, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000 [ffffffff80000000] pgd=0000000000000000 Internal error: Oops: 96000144 [#1] SMP Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1 Hardware name: Samsung Galaxy A5U (EUR) (DT) Workqueue: events deferred_probe_work_func pstate: 80000005 (Nzcv daif -PAN -UAO) pc : __clean_dcache_area_poc+0x20/0x38 lr : arch_sync_dma_for_device+0x28/0x30 sp : ffff0000115736a0 x29: ffff0000115736a0 x28: 0000000000000001 x27: ffff800074830800 x26: ffff000011478000 x25: 0000000000000000 x24: 0000000000000001 x23: ffff000011478a98 x22: ffff800009fd1c10 x21: 0000000000000001 x20: ffff800075ad0a00 x19: 0000000000000000 x18: ffff0000112b2000 x17: 0000000000000000 x16: 0000000000000000 x15: 00000000fffffff0 x14: ffff000011455d70 x13: 0000000000000000 x12: 0000000000000028 x11: 0000000000000001 x10: ffff00001106c000 x9 : ffff7e0001d6b380 x8 : 0000000000001000 x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382 x5 : 0000000000000000 x4 : 0000000000001000 x3 : 000000000000003f x2 : 0000000000000040 x1 : ffffffff80001000 x0 : ffffffff80000000 Call trace: __clean_dcache_area_poc+0x20/0x38 dma_direct_sync_sg_for_device+0xb8/0xe8 get_pages+0x22c/0x250 [msm] msm_gem_get_and_pin_iova+0xdc/0x168 [msm] ... Fixes the combination of two patches: Fixes: 0036bc73 (drm/msm: stop abusing dma_map/unmap for cache) Fixes: 449fa54d (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device) Tested-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
Rob Clark <robdclark@chromium.org> [seanpaul changed subject to something more desriptive] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com Cc: nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hans Verkuil authored
commit a4c30a48 upstream. When parsing the reply of a DP_REMOTE_DPCD_READ DPCD command the result is wrong due to a missing idx increment. This was never noticed since DP_REMOTE_DPCD_READ is currently not used, but if you enable it, then it is all wrong. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/e72ddac2-1dc0-100a-d816-9ac98ac009dd@xs4all.nlSigned-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Roger Quadros authored
commit c09b73cf upstream. This reverts commit 6a4290cc ("usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver.") We don't yet support any of the OTG mechanisms (HNP/SRP/ADP) and are not setting gadget->otg_caps, so don't set gadget->is_otg flag. If we do then we end up publishing a OTG1.0 descriptor in the gadget descriptor which causes device enumeration to fail if we are connected to a host with CONFIG_USB_OTG enabled. Host side log without this patch [ 96.720453] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 96.901391] usb 1-1: Dual-Role OTG device on non-HNP port [ 96.907552] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.060447] usb 1-1: new high-speed USB device number 3 using xhci-hcd [ 97.241378] usb 1-1: Dual-Role OTG device on non-HNP port [ 97.247536] usb 1-1: set a_alt_hnp_support failed: -32 [ 97.253606] usb usb1-port1: attempt power cycle [ 97.960449] usb 1-1: new high-speed USB device number 4 using xhci-hcd [ 98.141383] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.147540] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.300453] usb 1-1: new high-speed USB device number 5 using xhci-hcd [ 98.481391] usb 1-1: Dual-Role OTG device on non-HNP port [ 98.487545] usb 1-1: set a_alt_hnp_support failed: -32 [ 98.493532] usb usb1-port1: unable to enumerate USB device Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Arun KS authored
commit 61cf61d8 upstream. __early_cpu_boot_status is of type long. Use quad assembler directive to allocate proper size. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Arun KS <arunks@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Rob Clark authored
commit 0036bc73 upstream. Recently splats like this started showing up: WARNING: CPU: 4 PID: 251 at drivers/iommu/dma-iommu.c:451 __iommu_dma_unmap+0xb8/0xc0 Modules linked in: ath10k_snoc ath10k_core fuse msm ath mac80211 uvcvideo cfg80211 videobuf2_vmalloc videobuf2_memops vide CPU: 4 PID: 251 Comm: kworker/u16:4 Tainted: G W 5.2.0-rc5-next-20190619+ #2317 Hardware name: LENOVO 81JL/LNVNB161216, BIOS 9UCN23WW(V1.06) 10/25/2018 Workqueue: msm msm_gem_free_work [msm] pstate: 80c00005 (Nzcv daif +PAN +UAO) pc : __iommu_dma_unmap+0xb8/0xc0 lr : __iommu_dma_unmap+0x54/0xc0 sp : ffff0000119abce0 x29: ffff0000119abce0 x28: 0000000000000000 x27: ffff8001f9946648 x26: ffff8001ec271068 x25: 0000000000000000 x24: ffff8001ea3580a8 x23: ffff8001f95ba010 x22: ffff80018e83ba88 x21: ffff8001e548f000 x20: fffffffffffff000 x19: 0000000000001000 x18: 00000000c00001fe x17: 0000000000000000 x16: 0000000000000000 x15: ffff000015b70068 x14: 0000000000000005 x13: 0003142cc1be1768 x12: 0000000000000001 x11: ffff8001f6de9100 x10: 0000000000000009 x9 : ffff000015b78000 x8 : 0000000000000000 x7 : 0000000000000001 x6 : fffffffffffff000 x5 : 0000000000000fff x4 : ffff00001065dbc8 x3 : 000000000000000d x2 : 0000000000001000 x1 : fffffffffffff000 x0 : 0000000000000000 Call trace: __iommu_dma_unmap+0xb8/0xc0 iommu_dma_unmap_sg+0x98/0xb8 put_pages+0x5c/0xf0 [msm] msm_gem_free_work+0x10c/0x150 [msm] process_one_work+0x1e0/0x330 worker_thread+0x40/0x438 kthread+0x12c/0x130 ret_from_fork+0x10/0x18 ---[ end trace afc0dc5ab81a06bf ]--- Not quite sure what triggered that, but we really shouldn't be abusing dma_{map,unmap}_sg() for cache maint. Cc: Stephen Boyd <sboyd@kernel.org> Tested-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by:
-
Taniya Das authored
commit 21ea4b62 upstream. In case of update config failure, return -EBUSY, so that consumers could handle the failure gracefully. Signed-off-by:
Taniya Das <tdas@codeaurora.org> Link: https://lkml.kernel.org/r/1557339895-21952-2-git-send-email-tdas@codeaurora.orgSigned-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Avihai Horon authored
commit 987914ab upstream. After a successful allocation of path_rec, num_paths is set to 1, but any error after such allocation will leave num_paths uncleared. This causes to de-referencing a NULL pointer later on. Hence, num_paths needs to be set back to 0 if such an error occurs. The following crash from syzkaller revealed it. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 357 Comm: syz-executor060 Not tainted 4.18.0+ #311 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_copy_path_rec_to_user+0x94/0x3e0 Code: f1 f1 f1 f1 c7 40 0c 00 00 f4 f4 65 48 8b 04 25 28 00 00 00 48 89 45 c8 31 c0 e8 d7 60 24 ff 48 8d 7b 4c 48 89 f8 48 c1 e8 03 <42> 0f b6 14 30 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffff88006586f980 EFLAGS: 00010207 RAX: 0000000000000009 RBX: 0000000000000000 RCX: 1ffff1000d5fe475 RDX: ffff8800621e17c0 RSI: ffffffff820d45f9 RDI: 000000000000004c RBP: ffff88006586fa50 R08: ffffed000cb0df73 R09: ffffed000cb0df72 R10: ffff88006586fa70 R11: ffffed000cb0df73 R12: 1ffff1000cb0df30 R13: ffff88006586fae8 R14: dffffc0000000000 R15: ffff88006aff2200 FS: 00000000016fc880(0000) GS:ffff88006d000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 0000000063fec000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_copy_path_rec_from_user+0xcc0/0xcc0 ? __mutex_unlock_slowpath+0xfc/0x670 ? wait_for_completion+0x3b0/0x3b0 ? ucma_query_route+0x818/0xc60 ucma_query_route+0x818/0xc60 ? ucma_listen+0x1b0/0x1b0 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 ? ucma_listen+0x1b0/0x1b0 ? ucma_write+0x292/0x460 ucma_write+0x292/0x460 ? ucma_close_id+0x60/0x60 ? sched_clock_cpu+0x18/0x1d0 ? sched_clock_cpu+0x18/0x1d0 __vfs_write+0xf7/0x620 ? ucma_close_id+0x60/0x60 ? kernel_read+0x110/0x110 ? time_hardirqs_on+0x19/0x580 ? lock_acquire+0x18b/0x3a0 ? finish_task_switch+0xf3/0x5d0 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1be/0x5d0 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? security_file_permission+0x172/0x1e0 vfs_write+0x192/0x460 ksys_write+0xc6/0x1a0 ? __ia32_sys_read+0xb0/0xb0 ? entry_SYSCALL_64_after_hwframe+0x3e/0xbe ? do_syscall_64+0x1d/0x470 do_syscall_64+0x9e/0x470 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 3c86aa70 ("RDMA/cm: Add RDMA CM support for IBoE devices") Link: https://lore.kernel.org/r/20200318101741.47211-1-leon@kernel.orgSigned-off-by:
Avihai Horon <avihaih@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Qiujun Huang authored
commit 71811cac upstream. Needn't call 'rfcomm_dlc_put' here, because 'rfcomm_dlc_exists' didn't increase dlc->refcnt. Reported-by: syzbot+4496e82090657320efc6@syzkaller.appspotmail.com Signed-off-by:
Qiujun Huang <hqjagain@gmail.com> Suggested-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Ilya Dryomov authored
commit b27a939e upstream. syzbot reported that 4fbc0c71 ("ceph: remove the extra slashes in the server path") had caused a regression where an allocation could be done under a spinlock -- compare_mount_options() is called by sget_fc() with sb_lock held. We don't really need the supplied server path, so canonicalize it in place and compare it directly. To make this work, the leading slash is kept around and the logic in ceph_real_mount() to skip it is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e. canonicalized) path, with the leading slash of course. Fixes: 4fbc0c71 ("ceph: remove the extra slashes in the server path") Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Luis Henriques <lhenriques@suse.com> Signed-off-by:
-
Xiubo Li authored
commit 4fbc0c71 upstream. It's possible to pass the mount helper a server path that has more than one contiguous slash character. For example: $ mount -t ceph 192.168.195.165:40176:/// /mnt/cephfs/ In the MDS server side the extra slashes of the server path will be treated as snap dir, and then we can get the following debug logs: ceph: mount opening path // ceph: open_root_inode opening '//' ceph: fill_trace 0000000059b8a3bc is_dentry 0 is_target 1 ceph: alloc_inode 00000000dc4ca00b ceph: get_inode created new inode 00000000dc4ca00b 1.ffffffffffffffff ino 1 ceph: get_inode on 1=1.ffffffffffffffff got 00000000dc4ca00b And then when creating any new file or directory under the mount point, we can hit the following BUG_ON in ceph_fill_trace(): BUG_ON(ceph_snap(dir) != dvino.snap); Have the client ignore the extra slashes in the server path when mounting. This will also canonicalize the path, so that identical mounts can be consilidated. 1) "//mydir1///mydir//" 2) "/mydir1/mydir" 3) "/mydir1/mydir/" Regardless of the internal treatment of these paths, the kernel still stores the original string including the leading '/' for presentation to userland. URL: https://tracker.ceph.com/issues/42771Signed-off-by:
Xiubo Li <xiubli@redhat.com> Reviewed-by:
-
Kaike Wan authored
commit 5c15abc4 upstream. When the hfi1 driver is unloaded, kmemleak will report the following issue: unreferenced object 0xffff8888461a4c08 (size 8): comm "kworker/0:0", pid 5, jiffies 4298601264 (age 2047.134s) hex dump (first 8 bytes): 73 64 6d 61 30 00 ff ff sdma0... backtrace: [<00000000311a6ef5>] kvasprintf+0x62/0xd0 [<00000000ade94d9f>] kobject_set_name_vargs+0x1c/0x90 [<0000000060657dbb>] kobject_init_and_add+0x5d/0xb0 [<00000000346fe72b>] 0xffffffffa0c5ecba [<000000006cfc5819>] 0xffffffffa0c866b9 [<0000000031c65580>] 0xffffffffa0c38e87 [<00000000e9739b3f>] local_pci_probe+0x41/0x80 [<000000006c69911d>] work_for_cpu_fn+0x16/0x20 [<00000000601267b5>] process_one_work+0x171/0x380 [<0000000049a0eefa>] worker_thread+0x1d1/0x3f0 [<00000000909cf2b9>] kthread+0xf8/0x130 [<0000000058f5f874>] ret_from_fork+0x35/0x40 This patch fixes the issue by: - Releasing dd->per_sdma[i].kobject in hfi1_unregister_sysfs(). - This will fix the memory leak. - Calling kobject_put() to unwind operations only for those entries in dd->per_sdma[] whose operations have succeeded (including the current one that has just failed) in hfi1_verbs_register_sysfs(). Cc: <stable@vger.kernel.org> Fixes: 0cb2aa69 ("IB/hfi1: Add sysfs interface for affinity setup") Link: https://lore.kernel.org/r/20200326163807.21129.27371.stgit@awfm-01.aw.intel.comReviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Kaike Wan authored
commit dfb5394f upstream. When kobject_init_and_add() returns an error in the function hfi1_create_port_files(), the function kobject_put() is not called for the corresponding kobject, which potentially leads to memory leak. This patch fixes the issue by calling kobject_put() even if kobject_init_and_add() fails. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200326163813.21129.44280.stgit@awfm-01.aw.intel.comReviewed-by:
-
Paul Cercueil authored
commit 9401d5aa upstream. The 4-bit divider value was written at offset 8, while the jz4740 programming manual locates it at offset 0. Fixes: 26b0aad8 ("ASoC: jz4740: Add dynamic sampling rate support to jz4740-i2s") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200306222931.39664-2-paul@crapouillou.netSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
David Ahern authored
commit 4054ab64 upstream. A recent change to the netlink code: 6e237d09 ("netlink: Relax attr validation for fixed length types") logs a warning when programs send messages with invalid attributes (e.g., wrong length for a u32). Yafang reported this error message for tools/accounting/getdelays.c. send_cmd() is wrongly adding 1 to the attribute length. As noted in include/uapi/linux/netlink.h nla_len should be NLA_HDRLEN + payload length, so drop the +1. Fixes: 9e06d3f9 ("per task delay accounting taskstats interface: documentation fix") Reported-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jason A. Donenfeld authored
commit 69efea71 upstream. It turns out that RDRAND is pretty slow. Comparing these two constructions: for (i = 0; i < CHACHA_BLOCK_SIZE; i += sizeof(ret)) arch_get_random_long(&ret); and long buf[CHACHA_BLOCK_SIZE / sizeof(long)]; extract_crng((u8 *)buf); it amortizes out to 352 cycles per long for the top one and 107 cycles per long for the bottom one, on Coffee Lake Refresh, Intel Core i9-9880H. And importantly, the top one has the drawback of not benefiting from the real rng, whereas the bottom one has all the nice benefits of using our own chacha rng. As get_random_u{32,64} gets used in more places (perhaps beyond what it was originally intended for when it was introduced as get_random_{int,long} back in the md5 monstrosity era), it seems like it might be a good thing to strengthen its posture a tiny bit. Doing this should only be stronger and not any weaker because that pool is already initialized with a bunch of rdrand data (when available). This way, we get the benefits of the hardware rng as well as our own rng. Another benefit of this is that we no longer hit pitfalls of the recent stream of AMD bugs in RDRAND. One often used code pattern for various things is: do { val = get_random_u32(); } while (hash_table_contains_key(val)); That recent AMD bug rendered that pattern useless, whereas we're really very certain that chacha20 output will give pretty distributed numbers, no matter what. So, this simplification seems better both from a security perspective and from a performance perspective. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Oleksij Rempel authored
[ Upstream commit 6110dff7 ] After the power-down bit is cleared, the chip internally triggers a global reset. According to the KSZ9031 documentation, we have to wait at least 1ms for the reset to finish. If the chip is accessed during reset, read will return 0xffff, while write will be ignored. Depending on the system performance and MDIO bus speed, we may or may not run in to this issue. This bug was discovered on an iMX6QP system with KSZ9031 PHY and attached PHY interrupt line. If IRQ was used, the link status update was lost. In polling mode, the link status update was always correct. The investigation showed, that during a read-modify-write access, the read returned 0xffff (while the chip was still in reset) and corresponding write hit the chip _after_ reset and triggered (due to the 0xffff) another reset in an undocumented bit (register 0x1f, bit 1), resulting in the next write being lost due to the new reset cycle. This patch fixes the issue by adding a 1...2 ms sleep after the genphy_resume(). Fixes: 836384d2 ("net: phy: micrel: Add specific suspend") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Richard Palethorpe authored
[ Upstream commit b9258a2c ] struct can_frame contains some padding which is not explicitly zeroed in slc_bump. This uninitialized data will then be transmitted if the stack initialization hardening feature is not enabled (CONFIG_INIT_STACK_ALL). This commit just zeroes the whole struct including the padding. Signed-off-by:
Richard Palethorpe <rpalethorpe@suse.com> Fixes: a1044e36 ("can: add slcan driver for serial/USB-serial CAN adapters") Reviewed-by:
Kees Cook <keescook@chromium.org> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: security@kernel.org Cc: wg@grandegger.com Cc: mkl@pengutronix.de Cc: davem@davemloft.net Acked-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Jisheng Zhang authored
[ Upstream commit 3e1221ac ] Commit 9463c445 ("net: stmmac: dwmac1000: Clear unused address entries") cleared the unused mac address entries, but introduced an out-of bounds mac address register programming bug -- After setting the secondary unicast mac addresses, the "reg" value has reached netdev_uc_count() + 1, thus we should only clear address entries if (addr < perfect_addr_number) Fixes: 9463c445 ("net: stmmac: dwmac1000: Clear unused address entries") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit afa3b592 ] When the bcm_sf2 was converted into a proper platform device driver and used the new dsa_register_switch() interface, we would still be parsing the legacy DSA node that contained all the port information since the platform firmware has intentionally maintained backward and forward compatibility to client programs. Ensure that we do parse the correct node, which is "ports" per the revised DSA binding. Fixes: d9338023 ("net: dsa: bcm_sf2: Make it a real platform device driver") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
Randy Dunlap authored
commit aa9f7d51 upstream. Using an empty (malformed) nodelist that is not caught during mount option parsing leads to a stack-out-of-bounds access. The option string that was used was: "mpol=prefer:,". However, MPOL_PREFERRED requires a single node number, which is not being provided here. Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's nodeid. Fixes: 095f1fc4 ("mempolicy: rework shmem mpol parsing and display") Reported-by:
Entropy Moe <3ntr0py1337@gmail.com> Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Daniel Jordan authored
commit 38228e88 upstream. lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken: # echo 0 > /sys/devices/system/cpu/cpu1/online # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask ====================================================== WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted ------------------------------------------------------ bash/205 is trying to acquire lock: ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120 but task is already holding lock: ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120 which lock already depends on the new lock. padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority. Fixes: 6751fb3c ("padata: Use get_online_cpus/put_online_cpus") Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Florian Fainelli authored
When the backport of upstream commit 0e62f543 ("net: dsa: Fix duplicate frames flooded by learning") was done the assignment of skb->fwd_offload_mark would land in brcm_tag_xmit() which is incorrect, it should have been in brcm_tag_rcv(). Fixes: 5e845dc6 ("net: dsa: Fix duplicate frames flooded by learning") Signed-off-by:
-
Eugene Syromiatnikov authored
commit 9b6eaaf3 upstream. The BIT() macro definition is not available for the UAPI headers (moreover, it can be defined differently in the user space); replace its usage with the _BITUL() macro that is defined in <linux/const.h>. Fixes: 237483aa ("coresight: stm: adding driver for CoreSight STM component") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Cc: stable <stable@vger.kernel.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Link: https://lore.kernel.org/r/20200324042213.GA10452@asgard.redhat.comSigned-off-by:
-
Keith Busch authored
commit 530ca2c9 upstream. A recent commit runs tag iterator callbacks under the rcu read lock, but existing callbacks do not satisfy the non-blocking requirement. The commit intended to prevent an iterator from accessing a queue that's being modified. This patch fixes the original issue by taking a queue reference instead of reading it, which allows callbacks to make blocking calls. Fixes: f5bbbbe4 ("blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter") Acked-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Giuliano Procida <gprocida@google.com> Signed-off-by:
-
Jianchao Wang authored
commit f5bbbbe4 upstream. For blk-mq, part_in_flight/rw will invoke blk_mq_in_flight/rw to account the inflight requests. It will access the queue_hw_ctx and nr_hw_queues w/o any protection. When updating nr_hw_queues and blk_mq_in_flight/rw occur concurrently, panic comes up. Before update nr_hw_queues, the q will be frozen. So we could use q_usage_counter to avoid the race. percpu_ref_is_zero is used here so that we will not miss any in-flight request. The access to nr_hw_queues and queue_hw_ctx in blk_mq_queue_tag_busy_iter are under rcu critical section, __blk_mq_update_nr_hw_queues could use synchronize_rcu to ensure the zeroed q_usage_counter to be globally visible. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
Lucas Stach authored
commit 4900dda9 upstream. If a MMU is shared between multiple GPUs, all of them need to flush their TLBs, so a single marker that gets reset on the first flush won't do. Replace the flush marker with a sequence number, so that it's possible to check if the TLB is in sync with the current page table state for each GPU. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
Robert Beckett <bob.beckett@collabora.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 582eea23 ] Under certain circumstances, depending on the order of addresses on the interfaces, it could be that sctp_v[46]_get_dst() would return a dst with a mismatched struct flowi. For example, if when walking through the bind addresses and the first one is not a match, it saves the dst as a fallback (added in 410f0383), but not the flowi. Then if the next one is also not a match, the previous dst will be returned but with the flowi information for the 2nd address, which is wrong. The fix is to use a locally stored flowi that can be used for such attempts, and copy it to the parameter only in case it is a possible match, together with the corresponding dst entry. The patch updates IPv6 code mostly just to be in sync. Even though the issue is also present there, it fallback is not expected to work with IPv6. Fixes: 410f0383 ("sctp: add routing output fallback") Reported-by:
Jin Meng <meng.a.jin@nokia-sbell.com> Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Qiujun Huang authored
[ Upstream commit 5c3e82fe ] We should iterate over the datamsgs to move all chunks(skbs) to newsk. The following case cause the bug: for the trouble SKB, it was in outq->transmitted list sctp_outq_sack sctp_check_transmitted SKB was moved to outq->sacked list then throw away the sack queue SKB was deleted from outq->sacked (but it was held by datamsg at sctp_datamsg_to_asoc So, sctp_wfree was not called here) then migrate happened sctp_for_each_tx_datachunk( sctp_clear_owner_w); sctp_assoc_migrate(); sctp_for_each_tx_datachunk( sctp_set_owner_w); SKB was not in the outq, and was not changed to newsk finally __sctp_outq_teardown sctp_chunk_put (for another skb) sctp_datamsg_put __kfree_skb(msg->frag_list) sctp_wfree (for SKB) SKB->sk was still oldsk (skb->sk != asoc->base.sk). Reported-and-tested-by: syzbot+cea71eec5d6de256d54d@syzkaller.appspotmail.com Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
William Dauchy authored
[ Upstream commit 25629fda ] when creating a new ipip interface with no local/remote configuration, the lookup is done with TUNNEL_NO_KEY flag, making it impossible to match the new interface (only possible match being fallback or metada case interface); e.g: `ip link add tunl1 type ipip dev eth0` To fix this case, adding a flag check before the key comparison so we permit to match an interface with no local/remote config; it also avoids breaking possible userland tools relying on TUNNEL_NO_KEY flag and uninitialised key. context being on my side, I'm creating an extra ipip interface attached to the physical one, and moving it to a dedicated namespace. Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
William Dauchy <w.dauchy@criteo.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit fbe4e0c1 ] fib_triestat_seq_show() calls hlist_for_each_entry_rcu(tb, head, tb_hlist) without rcu_read_lock() will trigger a warning, net/ipv4/fib_trie.c:2579 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by proc01/115277: #0: c0000014507acf00 (&p->lock){+.+.}-{3:3}, at: seq_read+0x58/0x670 Call Trace: dump_stack+0xf4/0x164 (unreliable) lockdep_rcu_suspicious+0x140/0x164 fib_triestat_seq_show+0x750/0x880 seq_read+0x1a0/0x670 proc_reg_read+0x10c/0x1b0 __vfs_read+0x3c/0x70 vfs_read+0xac/0x170 ksys_read+0x7c/0x140 system_call+0x5c/0x68 Fix it by adding a pair of rcu_read_lock/unlock() and use cond_resched_rcu() to avoid the situation where walking of a large number of items may prevent scheduling for a long time. Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Gerd Hoffmann authored
[ Upstream commit 8c34cd1a ] Shutdown of firmware framebuffer has a bunch of problems. Because of this the framebuffer region might still be reserved even after drm_fb_helper_remove_conflicting_pci_framebuffers() returned. Don't consider pci_request_region() failure for the framebuffer region as fatal error to workaround this issue. Reported-by:
Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200313084152.2734-1-kraxel@redhat.comSigned-off-by:
-
Guillaume Nault authored
commit b228a940 upstream. There are several ways to remove L2TP sessions: * deleting a session explicitly using the netlink interface (with L2TP_CMD_SESSION_DELETE), * deleting the session's parent tunnel (either by closing the tunnel's file descriptor or using the netlink interface), * closing the PPPOL2TP file descriptor of a PPP pseudo-wire. In some cases, when these methods are used concurrently on the same session, the session can be removed twice, leading to use-after-free bugs. This patch adds a 'dead' flag, used by l2tp_session_delete() and l2tp_tunnel_closeall() to prevent them from stepping on each other's toes. The session deletion path used when closing a PPPOL2TP file descriptor doesn't need to be adapted. It already has to ensure that a session remains valid for the lifetime of its PPPOL2TP file descriptor. So it takes an extra reference on the session in the ->session_close() callback (pppol2tp_session_close()), which is eventually dropped in the ->sk_destruct() callback of the PPPOL2TP socket (pppol2tp_session_destruct()). Still, __l2tp_session_unhash() and l2tp_session_queue_purge() can be called twice and even concurrently for a given session, but thanks to proper locking and re-initialisation of list fields, this is not an issue. Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Guillaume Nault authored
commit cdd10c96 upstream. If l2tp_tunnel_delete() or l2tp_tunnel_closeall() deletes a session right after pppol2tp_release() orphaned its socket, then the 'sock' variable of the pppol2tp_session_close() callback is NULL. Yet the session is still used by pppol2tp_release(). Therefore we need to take an extra reference in any case, to prevent l2tp_tunnel_delete() or l2tp_tunnel_closeall() from freeing the session. Since the pppol2tp_session_close() callback is only set if the session is associated to a PPPOL2TP socket and that both l2tp_tunnel_delete() and l2tp_tunnel_closeall() hold the PPPOL2TP socket before calling pppol2tp_session_close(), we're sure that pppol2tp_session_close() and pppol2tp_session_destruct() are paired and called in the right order. So the reference taken by the former will be released by the later. Signed-off-by:
-
- 02 Apr, 2020 2 commits
-
-
Greg Kroah-Hartman authored
-
disconnect3d authored
commit db2c5494 upstream. This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca81836 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by:
disconnect3d <dominik.b.czarnota@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Keeping <john@metanate.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Lentine <mlentine@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
