- 13 Sep, 2024 39 commits
-
-
David S. Miller authored
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Add multi queue RX support am65-cpsw can support up to 8 queues at Rx. So far we have been using only one queue (i.e. default flow) for all RX traffic. This series adds multi-queue support. The driver starts with 1 RX queue by default. User can increase the RX queues via ethtool, e.g. 'ethtool -L ethx rx <N>' The series also adds regmap and regfield support to some of the ALE registers. It adds Policer/Classifier registers and fields. Converting the existing ALE control APIs to regfields can be a separate exercise. Some helper functions are added to read/write to the Policer/Classifier registers and a default Classifier setup function is added that routes packets based on their PCP/DSCP priority to different RX queues. Signed-off-by:
Roger Quadros <rogerq@kernel.org> --- Changes in v4: - Use single macro AM65_CPSW_MAX_QUEUES for both TX and RX queues to simplify code - reuse am65_cpsw_get/set_per_queue_coalesce for am65_cpsw_get/set_coalesce. - return -EINVAL if unsupported tx/rx_coalesce_usecs in am65_cpsw_set_coalesce. - reverse Xmas tree declaration order fixes in cpsw_ale - Link to v3: https://lore.kernel.org/r/20240703-am65-cpsw-multi-rx-v3-0-f11cd860fd72@kernel.org Changes in v3: - code style fixes - squashed patches 5 and 6 - added comment about priority to thread mapping table. - Added Reviewed-by Simon Horman. - Link to v2: https://lore.kernel.org/r/20240628-am65-cpsw-multi-rx-v2-0-c399cb77db56@kernel.org Changes in v2: - rebase to net/next - fixed RX stall issue during iperf - Link to v1: https://lore.kernel.org/r/20240606-am65-cpsw-multi-rx-v1-0-0704b0cb6fdc@kernel.org ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roger Quadros authored
Now that we support multiple RX queues, enable default priority to flow mapping so that higher priority packets come on higher channels (flows). The Classifier checks for PCP/DSCP priority in the packet and routes them to the appropriate flow. Signed-off-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Roger Quadros authored
The Policer registers in the ALE register space are just shadow registers and use an index field in the policer table control register to read/write to the actual Polier registers. Add helper functions to Read and Write to Policer registers. Also add a helper function to set the thread value to classifier/policer mapping. Any packet that first matches the classifier will be sent to the thread (flow) that is set in the classifier to thread mapping table. If not set then it goes to the default flow. Default behaviour is to have 8 classifiers to map 8 DSCP/PCP priorities to N receive threads (flows). N depends on number of RX channels enabled for the port. As per the standard [1] User prioritie 1 (Background) and 2 (Spare) have lower priority than the user priority 0 (default). User priority 1 being of the lowest priority. [1] IEEE802.1D-2004, IEEE Standard for Local and metropolitan area networks Table G-2 - Traffic type acronyms Table G-3 - Defining traffic types Signed-off-by:
-
Roger Quadros authored
Adds regfileds for Policer registers and Thread mapping/control registers. Signed-off-by:
-
Roger Quadros authored
Use regfields for number of ALE Entries and Policers. The variants that support Policers/Classifiers have the number of policers encoded in the ALE_STATUS register. Use that and show the number of Policers in the ALE info message. Signed-off-by:
-
Roger Quadros authored
Map the entire ALE registerspace using regmap. Add regfields for Major and Minor Version fields. Signed-off-by:
-
Roger Quadros authored
am65-cpsw can support up to 8 queues at Rx. Use a macro AM65_CPSW_MAX_RX_QUEUES to indicate that. As there is only one DMA channel for RX traffic, the 8 queues come as 8 flows in that channel. By default, we will start with 1 flow as defined by the macro AM65_CPSW_DEFAULT_RX_CHN_FLOWS. User can change the number of flows by ethtool like so 'ethtool -L ethx rx <N>' All traffic will still come on flow 0. To get traffic on different flows the Classifiers will need to be set up. Signed-off-by:
-
Mina Almasry authored
When CONFIG_SYSFS is not set, the kernel fails to compile: net/core/page_pool_user.c:368:45: error: implicit declaration of function 'get_netdev_rx_queue_index' [-Werror=implicit-function-declaration] 368 | if (pool->slow.queue_idx == get_netdev_rx_queue_index(rxq)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~ When CONFIG_SYSFS is not set, get_netdev_rx_queue_index() is not defined as well. Fix by removing the ifdef around get_netdev_rx_queue_index(). It is not needed anymore after commit e817f856 ("xdp: generic XDP handling of xdp_rxq_info") removed most of the CONFIG_SYSFS ifdefs. Fixes: 0f921404 ("memory-provider: dmabuf devmem memory provider") Cc: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:Mina Almasry <almasrymina@google.com> Link: https://patch.msgid.link/20240913032824.2117095-1-almasrymina@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Saeed Mahameed says: ==================== Misc updates to mlx5 driver: 1) Fix HW steering ret value and align with kdoc 2) Flow steering cleanups and add support for no append at software level 3) Support for sync reset using hot reset 4) RX SW counter to cover no-split events in header/data split mode 5) Make affinity of SFs configurable ==================== Link: https://patch.msgid.link/20240911201757.1505453-1-saeed@kernel.orgSigned-off-by:
-
Rahul Rameshbabu authored
mlx5e_free_rq previously cleaned resources in an order that was not the reverse of the resource allocation order in mlx5e_alloc_rq. Signed-off-by:
Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20240911201757.1505453-16-saeed@kernel.orgSigned-off-by:
-
Dragos Tatulea authored
When SHAMPO can't identify the protocol/header of a packet, it will yield a packet that is not split - all the packet is in the data part. Count this value in packets and bytes. Signed-off-by:
Dragos Tatulea <dtatulea@nvidia.com> Signed-off-by:
-
Shay Drory authored
Add a new command status MLX5_CMD_STAT_NOT_READY to handle cases where the firmware is not ready. Signed-off-by:
Shay Drory <shayd@nvidia.com> Signed-off-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://patch.msgid.link/20240911201757.1505453-14-saeed@kernel.orgSigned-off-by:
-
Shay Drory authored
SFs didn't allow to configure IRQ affinity for its vectors. Allow users to configure the affinity of the SFs irqs. Signed-off-by:
-
Moshe Shemesh authored
Sync reset request is nacked by the driver when PCIe bridge connected to mlx5 device has HotPlug interrupt enabled. However, when using reset method of hot reset this check can be skipped as Hotplug is supported on this reset method. Signed-off-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
On device that supports sync reset for firmware activate using hot reset, the driver queries the required reset method while handling the sync reset request. If the required reset method is hot reset, the driver will use pci_reset_bus() to reset the PCI link instead of the link toggle. Signed-off-by:
-
Moshe Shemesh authored
New devices with new FW can support sync reset for firmware activate using hot reset. Add capability for supporting it and add MFRL field to query from FW which type of PCI reset method to use while handling sync reset events. Signed-off-by:
-
Mark Bloch authored
Native capability for some steering engines lacks support for adding an additional match with the same value to the same flow group. To accommodate the NO APPEND flag in these scenarios, we include the new rule in the existing flow table entry (fte) without immediate hardware commitment. When a request is made to delete the corresponding hardware rule, we then commit the pending rule to hardware. Only one pending rule is supported because NO_APPEND is primarily used during replacement operations. In this scenario, a rule is initially added. When it needs replacement, the new rule is added with NO_APPEND set. Only after the insertion of the new rule is the original rule deleted. Signed-off-by:
Mark Bloch <mbloch@nvidia.com> Signed-off-by:
-
Mark Bloch authored
Introduce a dedicated structure to encapsulate flow context, actions, destination count, and modification mask. This refactoring lays the groundwork for forthcoming patches that will integrate the NO APPEND software logic. Future modifications should focus solely on these specific fields. Signed-off-by:
-
Mark Bloch authored
Counter is in struct fte, remove it. Signed-off-by:
-
Mark Bloch authored
Downstream patches will need this as we might not want to reset it when a pending rule is connected to the FTE. Signed-off-by:
-
Moshe Shemesh authored
As preparation for HW Steering support, where the function get_root_namespace() is needed to get root FDB, make it an API function and rename it to mlx5_get_root_namespace(). Reviewed-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
-
Moshe Shemesh authored
As preparation for HW steering support in fs core level, move SW steering helper function that can be reused by HW steering to fs_cmd.h. The function mlx5_fs_cmd_is_fw_term_table() checks if a flow table is a flow steering termination table and so should be handled by FW steering. Reviewed-by:
-
Yevgeny Kliteynik authored
Fixed all the '-ret' returns in error flow of functions to 'ret', as the internal functions are already returning negative error values (e.g. -EINVAL) Signed-off-by:
-
Yevgeny Kliteynik authored
Changed all the functions comments to adhere with kernel-doc formatting. Signed-off-by:
-
Jakub Kicinski authored
Jinjie Ruan says: ==================== net: Use IRQF_NO_AUTOEN flag in request_irq() As commit cbe16f35 ("genirq: Add IRQF_NO_AUTOEN for request_irq/nmi()") said, reqeust_irq() and then disable_irq() is unsafe. IRQF_NO_AUTOEN flag can be used by drivers to request_irq(). It prevents the automatic enabling of the requested interrupt in the same safe way. With that the usage can be simplified and corrected. ==================== Link: https://patch.msgid.link/20240911094445.1922476-1-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20240911094445.1922476-4-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bbb96dc7 ("enetc: Factor out the traffic start/stop procedures") Signed-off-by:
-
Jinjie Ruan authored
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Signed-off-by:
-
Jakub Kicinski authored
Justin sent a patch to use strscpy_pad() instead of strncpy() on the name field. Simon rightly asked why the _pad() version is used, and looking closer name seems completely unused, the last code which referred to it was removed in commit 8391c4aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Link: https://lore.kernel.org/20240909-strncpy-net-caif-chnl_net-c-v1-1-438eb870c155@google.comReviewed-by:
Justin Stitt <justinstitt@google.com> Link: https://patch.msgid.link/20240911015228.1555779-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The uAPI headers for IPX were deleted 3 years ago in commit 6c9b4084 ("net: Remove net/ipx.h and uapi/linux/ipx.h header files") Delete the leftover defines from libc-compat.h Link: https://patch.msgid.link/20240911002142.1508694-1-kuba@kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2024-09-11 We've added 12 non-merge commits during the last 16 day(s) which contain a total of 20 files changed, 228 insertions(+), 30 deletions(-). There's a minor merge conflict in drivers/net/netkit.c: 00d066a4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx") d9660879 ("netkit: Disable netpoll support") The main changes are: 1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used to easily parse skbs in BPF programs attached to tracepoints, from Philo Lu. 2) Add a cond_resched() point in BPF's sock_hash_free() as there have been several syzbot soft lockup reports recently, from Eric Dumazet. 3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which got noticed when zero copy ice driver started to use it, from Maciej Fijalkowski. 4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs up via netif_receive_skb_list() to better measure latencies, from Daniel Xu. 5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann. 6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but instead gather the actual value via /proc/sys/net/core/max_skb_frags, also from Maciej Fijalkowski. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: sock_map: Add a cond_resched() in sock_hash_free() selftests/bpf: Expand skb dynptr selftests for tp_btf bpf: Allow bpf_dynptr_from_skb() for tp_btf tcp: Use skb__nullable in trace_tcp_send_reset selftests/bpf: Add test for __nullable suffix in tp_btf bpf: Support __nullable argument suffix for tp_btf bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc() tcp_bpf: Remove an unused parameter for bpf_tcp_ingress() bpf, sockmap: Correct spelling skmsg.c netkit: Disable netpoll support Signed-off-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== selftests/net: packetdrill: netns and two imports From: Willem de Bruijn <willemb@google.com> 1/3: run in nets, as discussed, and add missing CONFIGs 2/3: import tcp/zerocopy 3/3: import tcp/slow_start ==================== Link: https://patch.msgid.link/20240912005317.1253001-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same import process as previous tests. Also add CONFIG_NET_SCH_FQ to config, as one test uses that. Same test process as previous tests. Both with and without debug mode. Recording the steps once: make mrproper vng --build \ --config tools/testing/selftests/net/packetdrill/config \ --config kernel/configs/debug.config vng -v --run . --user root --cpus 4 -- \ make -C tools/testing/selftests TARGETS=net/packetdrill run_tests Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-buildSigned-off-by:Willem de Bruijn <willemb@google.com> Acked-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240912005317.1253001-4-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
Same as initial tests, import verbatim from github.com/google/packetdrill, aside from: - update `source ./defaults.sh` path to adjust for flat dir - add SPDX headers - remove author statements if any - drop blank lines at EOF (new) Also import set_sysctls.py, which many scripts depend on to set sysctls and then restore them later. This is no longer strictly needed for namespacified sysctl. But not all sysctls are namespacified, and doesn't hurt if they are. Signed-off-by:
-
Willem de Bruijn authored
Run packetdrill tests inside netns. They may change system settings, such as sysctl. Also expand config with a few more needed CONFIGs. Link: https://lore.kernel.org/netdev/20240910152640.429920be@kernel.org/Signed-off-by:
-
Jakub Kicinski authored
David Arinzon says: ==================== ENA driver metrics changes This patchset contains an introduction of new metrics available to ENA users. ==================== Link: https://patch.msgid.link/20240909084704.13856-1-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
ENA currently supports the following customer metrics: - `bw_in_allowance_exceeded` - `bw_out_allowance_exceeded` - `conntrack_allowance_exceeded` - `linklocal_allowance_exceeded` - `pps_allowance_exceeded` This patch adds a new metric named: `conntrack_allowance_available`. Information about these metrics is available in [1]. In addition, the interface between the driver and the device has been upgraded to allow more flexibility and expendability to additional metrics in the future. [1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metricsSigned-off-by:
Ron Beider <rbeider@amazon.com> Signed-off-by:
Shahar Itzko <itzko@amazon.com> Signed-off-by:
David Arinzon <darinzon@amazon.com> Link: https://patch.msgid.link/20240909084704.13856-3-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
ENA Express metrics, called `ena_srd` are exposed to customers via `ethtool`. The metrics allow customers to check the configuration (mode), tx/rx counters as well as resource utilization. The documentation is also updated to provide a general explanation about ENA Express as well as links for further information about metrics and configurations. Signed-off-by:
Igor Chauskin <igorch@amazon.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65e ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bd ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by:
-
- 12 Sep, 2024 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. There is a recently notified BT regression with no fix yet. I do not think a fix will land in the next week. Current release - regressions: - core: tighten bad gso csum offset check in virtio_net_hdr - netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() - eth: ice: stop calling pci_disable_device() as we use pcim - eth: fou: fix null-ptr-deref in GRO. Current release - new code bugs: - hsr: prevent NULL pointer dereference in hsr_proxy_announce() Previous releases - regressions: - hsr: remove seqnr_lock - netfilter: nft_socket: fix sk refcount leaks - mptcp: pm: fix uaf in __timer_delete_sync - phy: dp83822: fix NULL pointer dereference on DP83825 devices - eth: revert "virtio_net: rx enable premapped mode by default" - eth: octeontx2-af: Modify SMQ flush sequence to drop packets Previous releases - always broken: - eth: mlx5: fix bridge mode operations when there are no VFs - eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock" * tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() net: tighten bad gso csum offset check in virtio_net_hdr netlink: specs: mptcp: fix port endianness net: dpaa: Pad packets to ETH_ZLEN mptcp: pm: Fix uaf in __timer_delete_sync net: libwx: fix number of Rx and Tx descriptors net: dsa: felix: ignore pending status of TAS module when it's disabled net: hsr: prevent NULL pointer dereference in hsr_proxy_announce() selftests: mptcp: include net_helper.sh file selftests: mptcp: include lib.sh file selftests: mptcp: join: restrict fullmesh endp on 1st sf netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER dt-bindings: net: tja11xx: fix the broken binding selftests: net: csum: Fix checksums for packets with non-zero padding net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices virtio_net: disable premapped mode by default Revert "virtio_net: big mode skip the unmap check" Revert "virtio_net: rx remove premapped failover code" ...
-
