- 30 Nov, 2011 10 commits
-
-
Alexandre Oliva authored
If we don't have a cluster, don't bother trying to allocate from it, jumping right away to the attempt to allocate a new cluster. Signed-off-by:
Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Alexandre Oliva authored
We test whether a block group has enough free space to hold the requested block, but when we're doing clustered allocation, we can save some cycles by testing whether it has enough room for the cluster upfront, otherwise we end up attempting to set up a cluster and failing. Only in the NO_EMPTY_SIZE loop do we attempt an unclustered allocation, and by then we'll have zeroed the cluster size, so this patch won't stop us from using the block group as a last resort. Signed-off-by:
Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Alexandre Oliva authored
Instead of starting at zero (offset is always zero), request a cluster starting at search_start, that denotes the beginning of the current block group. Signed-off-by:
Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Alexandre Oliva authored
The field that indicates the size of the largest contiguous chunk of free space in the cluster is not initialized when setting up bitmaps, it's only increased when we find a larger contiguous chunk. We end up retaining a larger value than appropriate for highly-fragmented clusters, which may cause pointless searches for large contiguous groups, and even cause clusters that do not meet the density requirements to be set up. Signed-off-by:
Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Alexandre Oliva authored
We're failing to create clusters with bitmaps because setup_cluster_no_bitmap checks that the list is empty before inserting the bitmap entry in the list for setup_cluster_bitmap, but the list field is only initialized when it is restored from the on-disk free space cache, or when it is written out to disk. Besides a potential race condition due to the multiple use of the list field, filesystem performance severely degrades over time: as we use up all non-bitmap free extents, the try-to-set-up-cluster dance is done at every metadata block allocation. For every block group, we fail to set up a cluster, and after failing on them all up to twice, we fall back to the much slower unclustered allocation. To make matters worse, before the unclustered allocation, we try to create new block groups until we reach the 1% threshold, which introduces additional bitmaps and thus block groups that we'll iterate over at each metadata block request.
-
Li Zefan authored
To reproduce this bug: # dd if=/dev/zero of=img bs=1M count=256 # mkfs.btrfs img # losetup -r /dev/loop1 img # mount /dev/loop1 /mnt OOPS!! It triggered BUG_ON(!nr_devices) in btrfs_calc_avail_data_space(). To fix this, instead of checking write-only devices, we check all open deivces: # df -h /dev/loop1 Filesystem Size Used Avail Use% Mounted on /dev/loop1 250M 28K 238M 1% /mnt Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com>
-
Mike Fleetwood authored
It seems overly harsh to fail a resize of a btrfs file system to the same size when a shrink or grow would succeed. User app GParted trips over this error. Allow it by bypassing the shrink or grow operation. Signed-off-by:
Mike Fleetwood <mike.fleetwood@googlemail.com>
-
Miao Xie authored
When I ran the xfstests, I found the test tasks was blocked on meta-data reservation. By debugging, I found the reason of this bug: start transaction | v reserve meta-data space | v flush delay allocation -> iput inode -> evict inode ^ | | v wait for delay allocation flush <- reserve meta-data space And besides that, the flush on evicting inode will block the thread, which is reclaiming the memory, and make oom happen easily. Fix this bug by skipping the flush step when evicting inode. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com>
-
Arnd Hannemann authored
The location of the btrfs-progs repository has been changed. This patch updates the documentation accordingly. Signed-off-by:
Arnd Hannemann <arnd@arndnet.de>
-
Dan Carpenter authored
init_ipath() can return an ERR_PTR(-ENOMEM). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com>
-
- 21 Nov, 2011 1 commit
-
-
Chris Mason authored
The log replay code only partially loads block groups, since the block group caching code is able to detect and deal with extents the logging code has pinned down. While the logging code is pinning down block groups, there is a bogus WARN_ON we're hitting if the code wasn't able to find an extent in the cache. This commit removes the warning because it can happen any time there isn't a valid free space cache for that block group. Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
- 20 Nov, 2011 10 commits
-
-
Josef Bacik authored
We've been hitting BUG()'s in btrfs_cont_expand and btrfs_fallocate and anywhere else that calls btrfs_get_extent while running xfstests 13 in a loop. This is because fiemap is calling btrfs_get_extent with non-sectorsize aligned offsets, which will end up adding mappings that are not sectorsize aligned, which will cause problems in some cases for subsequent calls to btrfs_get_extent for similar areas that are sectorsize aligned. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't hit the problem that I could previously hit in at most 20 minutes. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
When doing the io_ctl helpers to clean up the free space cache stuff I stopped using our normal prepare_pages stuff, which means I of course forgot to do things like set the pages extent mapped, which will cause us all sorts of wonderful propblems. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Josef Bacik authored
We've been hitting panics when running xfstest 13 in a loop for long periods of time. And actually this problem has always existed so we've been hitting these things randomly for a while. Basically what happens is we get a thread coming into the allocator and reading the space cache off of disk and adding the entries to the free space cache as we go. Then we get another thread that comes in and tries to allocate from that block group. Since block_group->cached != BTRFS_CACHE_NO it goes ahead and tries to do the allocation. We do this because if we're doing the old slow way of caching we don't want to hold people up and wait for everything to finish. The problem with this is we could end up discarding the space cache at some arbitrary point in the future, which means we could very well end up allocating space that is either bad, or when the real caching happens it could end up thinking the space isn't in use when it really is and cause all sorts of other problems. The solution is to add a new flag to indicate we are loading the free space cache from disk, and always try to cache the block group if cache->cached != BTRFS_CACHE_FINISHED. That way if we are loading the space cache anybody else who tries to allocate from the block group will have to wait until it's finished to make sure it completes successfully. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com>
-
Arnd Hannemann authored
For the user it is confusing to find something like: [10197.627710] new size for /dev/mapper/vg0-usr_share is 3221225472 in kernel log, because it doesn't point directly to btrfs. This patch prefixes those messages with "btrfs:" like other btrfs related printks. Signed-off-by:
Arnd Hannemann <arnd@arndnet.de> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
David Sterba authored
Round inode bytes and delalloc bytes up to real blocksize before converting to sector size. Otherwise eg. files smaller than 512 are reported with zero blocks due to incorrect rounding. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
setup_cluster_no_bitmap() searches all the extents and bitmaps starting from offset. Therefore if it returns -ENOSPC, all the bitmaps starting from offset are in the bitmaps list, so it's sufficient to search from this list in setup_cluser_bitmap(). Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Li Zefan authored
Suppose there are two bitmaps [0, 256], [256, 512] and one extent [100, 120] in the free space cache, and we want to setup a cluster with offset=100, bytes=50. In this case, there will be only one bitmap [256, 512] in the temporary bitmaps list, and then setup_cluster_bitmap() won't search bitmap [0, 256]. The cause is, the list is constructed in setup_cluster_no_bitmap(), and only bitmaps with bitmap_entry->offset >= offset will be added into the list, and the very bitmap that convers offset has bitmap_entry->offset <= offset. Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Jan Schmidt authored
My previous patch introduced some u64 for failed_mirror variables, this one makes it consistent again. Signed-off-by:
Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Jeff Mahoney authored
This patch casts to unsigned long before casting to a pointer and fixes the following warnings: fs/btrfs/extent_io.c:2289:20: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2933:37: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] fs/btrfs/ioctl.c:2937:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/ioctl.c:3020:21: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/scrub.c:275:4: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] fs/btrfs/backref.c:686:27: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Chris Mason authored
When btrfs is writing the super blocks, it send barrier flushes to make sure writeback caching drives get all the metadata on disk in the right order. But, we have two bugs in the way these are sent down. When doing full commits (not via the tree log), we are sending the barrier down before the last super when it should be going down before the first. In multi-device setups, we should be waiting for the barriers to complete on all devices before writing any of the supers. Both of these bugs can cause corruptions on power failures. We fix it with some new code to send down empty barriers to all devices before writing the first super. Alexandre Oliva found the multi-device bug. Arne Jansen did the async barrier loop. Signed-off-by:
Chris Mason <chris.mason@oracle.com> Reported-by:
Alexandre Oliva <oliva@lsd.ic.unicamp.br>
-
- 15 Nov, 2011 1 commit
-
-
Liu Bo authored
The btrfs snapshotting code requires that once a root has been snapshotted, we don't change it during a commit. But there are two cases to lead to tree corruptions: 1) multi-thread snapshots can commit serveral snapshots in a transaction, and this may change the src root when processing the following pending snapshots, which lead to the former snapshots corruptions; 2) the free inode cache was changing the roots when it root the cache, which lead to corruptions. This fixes things by making sure we force COW the block after we create a snapshot during commiting a transaction, then any changes to the roots will result in COW, and we get all the fs roots and snapshot roots to be consistent. Signed-off-by:
Liu Bo <liubo2009@cn.fujitsu.com> Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
- 11 Nov, 2011 11 commits
-
-
David Sterba authored
Rename no_space_cache option to nospace_cache to be more consistent with the rest, where the simple prefix 'no' is used to negate an option. The option has been introduced during the -rc1 cycle and there are has not been widely used, so it's safe. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Arne Jansen authored
Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by:
Arne Jansen <sensille@gmx.net> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
We can not do flushable reservation for the relocation when we create snapshot, because it may make the transaction commit task and the flush task wait for each other and the deadlock happens. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Josef Bacik authored
People have been running into a warning when loading space cache because the page is already mapped when trying to read in a bitmap. The way we read in entries and pages is kind of convoluted, so fix it so that io_ctl_read_entry maps the entries if it needs to, and if it hits the end of the page it simply unmaps the page. That way we can unconditionally unmap the io_ctl before reading in the bitmap and we should stop hitting these warnings. Thanks, Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
If the root node of a fs/file tree is in the block group that is being relocated, but the others are not in the other block groups. when we create a snapshot for this tree between the relocation tree creation ends and ->create_reloc_tree is set to 0, Btrfs will create some backref nodes that are the lowest nodes of the backrefs cache. But we forget to add them into ->leaves list of the backref cache and deal with them, and at last, they will triggered BUG_ON(). kernel BUG at fs/btrfs/relocation.c:239! This patch fixes it by adding them into ->leaves list of backref cache. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
btrfs_block_rsv_add{, _noflush}() have similar code, so abstract that code. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
When we did stress test for the space relocation, the deadlock happened. By debugging, We found it was caused by the carelessness that we forgot to unlock the read lock of the extent buffers in btrfs_orphan_cleanup() before we end the transaction handle, so the transaction commit task waited the task, which called btrfs_orphan_cleanup(), to unlock the extent buffer, but that task waited the commit task to end the transaction commit, and the deadlock happened. Fix it. Signed-ff-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
I-node cache forgets to reserve the space when writing out it. And when we do some stress test, such as synctest, it will trigger WARN_ON() in use_block_rsv(). WARNING: at fs/btrfs/extent-tree.c:5718 btrfs_alloc_free_block+0xbf/0x281 [btrfs]() ... Call Trace: [<ffffffff8104df86>] warn_slowpath_common+0x80/0x98 [<ffffffff8104dfb3>] warn_slowpath_null+0x15/0x17 [<ffffffffa0369c60>] btrfs_alloc_free_block+0xbf/0x281 [btrfs] [<ffffffff810cbcb8>] ? __set_page_dirty_nobuffers+0xfe/0x108 [<ffffffffa035c040>] __btrfs_cow_block+0x118/0x3b5 [btrfs] [<ffffffffa035c7ba>] btrfs_cow_block+0x103/0x14e [btrfs] [<ffffffffa035e4c4>] btrfs_search_slot+0x249/0x6a4 [btrfs] [<ffffffffa036d086>] btrfs_lookup_inode+0x2a/0x8a [btrfs] [<ffffffffa03788b7>] btrfs_update_inode+0xaa/0x141 [btrfs] [<ffffffffa036d7ec>] btrfs_save_ino_cache+0xea/0x202 [btrfs] [<ffffffffa03a761e>] ? btrfs_update_reloc_root+0x17e/0x197 [btrfs] [<ffffffffa0373867>] commit_fs_roots+0xaa/0x158 [btrfs] [<ffffffffa03746a6>] btrfs_commit_transaction+0x405/0x731 [btrfs] [<ffffffff810690df>] ? wake_up_bit+0x25/0x25 [<ffffffffa039d652>] ? btrfs_log_dentry_safe+0x43/0x51 [btrfs] [<ffffffffa0381c5f>] btrfs_sync_file+0x16a/0x198 [btrfs] [<ffffffff81122806>] ? mntput+0x21/0x23 [<ffffffff8112d150>] vfs_fsync_range+0x18/0x21 [<ffffffff8112d170>] vfs_fsync+0x17/0x19 [<ffffffff8112d316>] do_fsync+0x29/0x3e [<ffffffff8112d348>] sys_fsync+0xb/0xf [<ffffffff81468352>] system_call_fastpath+0x16/0x1b Sometimes it causes BUG_ON() in the reservation code of the delayed inode is triggered. So we must reserve enough space for inode cache. Note: If we can not reserve the enough space for inode cache, we will give up writing out it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Miao Xie authored
btrfs_previous_item() just search the b+ tree, do not COW the nodes or leaves, if we modify the result of it, the meta-data will be broken. fix it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
-
Chris Mason authored
Josef sent along an incremental to the inode reservation code to make sure we try and fall back to directly updating the inode item if things go horribly wrong. This reworks that patch slightly, adding a fallback function that will always try to update the inode item directly without going through the delayed_inode code. Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
- 09 Nov, 2011 5 commits
-
-
Ilya Dryomov authored
Commits 6c41761f and 45ea6095 introduced the possibility of NULL pointer dereference on error paths, also we would leave all devices busy and leak fs_info with all sub-structures on error when trying to mount an already mounted fs to a different directory. Fix this by doing all allocations before trying to open any of the devices, adjust error path for mount-already-mounted-fs case. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Ilya Dryomov authored
Fix a bug introduced by 7e662854 where we would leave devices busy on certain error paths in open_ctree(). fs_info is guaranteed to be non-NULL now so it's safe to dereference it on all error paths. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Ilya Dryomov authored
Fix bugs introduced by 6c41761f. Firstly, after failing to allocate any of the tree roots (first 'goto fail' in open_ctree()) we would dereference a NULL fs_info pointer in free_fs_info(). Secondly, after failures from init_srcu_struct(), setup_bdi() and new_inode() we would leak all earlier allocated roots: fs_info fields haven't been initialized yet so free_fs_info() is rendered useless. Fix this by initializing fs_info pointer and fs_info fields before any allocations happen. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Ilya Dryomov authored
btrfs_parse_early_options() can fail due to error while scanning devices (-o device= option), but still strdup() subvol_name string: mount -o subvol=SUBV,device=BAD_DEVICE <dev> <mnt> So free subvol_name string on error. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
Ilya Dryomov authored
Don't leak subvol_name string in case multiple subvol= options are given. "The lastest option is effective" behavior (consistent with subvolid= and subvolrootid= options) is preserved. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com>
-
- 08 Nov, 2011 2 commits
-
-
Josef Bacik authored
People have been reporting ENOSPC crashes in finish_ordered_io. This is because we try to steal from the delalloc block rsv to satisfy a reservation to update the inode. The problem with this is we don't explicitly save space for updating the inode when doing delalloc. This is kind of a problem and we've gotten away with this because way back when we just stole from the delalloc reserve without any questions, and this worked out fine because generally speaking the leaf had been modified either by the mtime update when we did the original write or because we just updated the leaf when we inserted the file extent item, only on rare occasions had the leaf not actually been modified, and that was still ok because we'd just use a block or two out of the over-reservation that is delalloc. Then came the delayed inode stuff. This is amazing, except it wants a full reservation for updating the inode since it may do it at some point down the road after we've written the blocks and we have to recow everything again. This worked out because the delayed inode stuff just stole from the global reserve, that is until recently when I changed that because it caused other problems. So here we are, we're doing everything right and being screwed for it. So take an extra reservation for the inode at delalloc reservation time and carry it through the life of the delalloc reservation. If we need it we can steal it in the delayed inode stuff. If we have already stolen it try and do a normal metadata reservation. If that fails try to steal from the delalloc reservation. If _that_ fails we'll get a WARN_ON() so I can start thinking of a better way to solve this and in the meantime we'll steal from the global reserve. With this patch I ran xfstests 13 in a loop for a couple of hours and didn't see any problems. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-
Chris Mason authored
If we fail to reserve space in the transaction during truncate, we can error out with a NULL trans handle. The cleanup code needs an extra check to make sure we aren't trying to use the bad handle. Signed-off-by:
Chris Mason <chris.mason@oracle.com>
-