- 15 Mar, 2021 1 commit
-
-
Umesh Nerlige Ramappa authored
SAMPLE_OA parameter enables sampling of OA buffer and results in a call to init the OA buffer which initializes the OA unit head/tail pointers. The OA_EXPONENT parameter controls the periodicity of the OA reports in the OA buffer and results in starting a hrtimer. Before gen12, all use cases required the use of the OA buffer and i915 enforced this setting when vetting out the parameters passed. In these platforms the hrtimer was enabled if OA_EXPONENT was passed. This worked fine since it was implied that SAMPLE_OA is always passed. With gen12, this changed. Users can use perf without enabling the OA buffer as in OAR use cases. While an OAR use case should ideally not start the hrtimer, we see that passing an OA_EXPONENT parameter will start the hrtimer even though SAMPLE_OA is not specified. This results in an uninitialized OA buffer, so the head/tail pointers used to track the buffer are zero. This itself does not fail, but if we ran a use-case that SAMPLED the OA buffer previously, then the OA_TAIL register is still pointing to an old value. When the timer callback runs, it ends up calculating a wrong/large number of available reports. Since we do a spinlock_irq_save and start processing a large number of reports, NMI watchdog fires and causes a crash. Start the timer only if SAMPLE_OA is specified. v2: - Drop SAMPLE OA check when appending samples (Ashutosh) - Prevent read if OA buffer is not being sampled Fixes: 00a7f0d7 ("drm/i915/tgl: Add perf support on TGL") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305210947.58751-1-umesh.nerlige.ramappa@intel.com
-
- 12 Mar, 2021 6 commits
-
-
Ville Syrjälä authored
Rename a bunch of the skl+ watermark struct members to have sensible names. Avoids me having to think what plane_res_b/etc. means. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-7-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Make the code more typo proof by extracting small helpers that do the "do we have enough DDB for the WM level?" checks in a consistent manner. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-6-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Let's make all the "do we have enough DDB for this WM level?" checks use min_ddb_alloc. To achieve that we need to populate this for the transition watermarks as well. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-5-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
For non-transition watermarks we are supposed to check min_ddb_alloc rather than plane_res_b when determining if we have enough DDB space for it. A bit too much copy pasta made me check the wrong thing. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: df4a50a3 ("drm/i915: Zero out SAGV wm when we don't have enough DDB for it") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-4-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
Say we have two planes enabled with watermarks configured as follows: plane A: wm0=enabled/can_sagv=false, wm1=enabled/can_sagv=true plane B: wm0=enabled/can_sagv=true, wm1=disabled This is possible since the latency we use to calculate can_sagv may not be the same for both planes due to skl_needs_memory_bw_wa(). In this case skl_crtc_can_enable_sagv() will see that both planes have enabled at least one watermark level with can_sagv==true, and thus proceeds to allow SAGV. However, since plane B does not have wm1 enabled plane A can't actually use it either. Thus we are now running with SAGV enabled, but plane A can't actually tolerate the extra latency it imposes. To remedy this only allow SAGV on if the highest common enabled watermark level for all active planes can tolerate the extra SAGV latency. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210305153610.12177-3-ville.syrjala@linux.intel.comReviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
On HSW/BDW with VT-d active the first tile row scanned out after the first async flip of the frame often ends up corrupted. Whether the corruption happens or not depends on the scanline on which the async flip happens, but the behaviour seems very consistent. Ie. the same set of scanlines (which are most scanlines) always show the corruption. And another set of scanlines (far less of them) never shows the corruption. I discovered that disabling the fetch-stride stretching feature cures the corruption. This is some kind of TLB related prefetch thing AFAIK. We already disable it on SNB primary planes due to a documented workaround. The hardware folks indicated that disabling this should be fine, so let's go with that. And while we're here, let's document the relevant bits on all pre-skl platforms. Fixes: 2a636e24 ("drm/i915: Implement async flip for ivb/hsw") Fixes: cda195f1 ("drm/i915: Implement async flips for bdw") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210220103303.3448-1-ville.syrjala@linux.intel.comReviewed-by: Karthik B S <karthik.b.s@intel.com>
-
- 11 Mar, 2021 2 commits
-
-
Ville Syrjälä authored
Let's check that we actually found the PLL before doing the port_clock readout, just in case the hardware was severly misprogrammed by the previous guy. Not sure the hw would even survive such misprogramming without hanging but no real harm in checking anyway. Cc: Karthik B S <karthik.b.s@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210310194351.6233-1-ville.syrjala@linux.intel.comReviewed-by: Karthik B S <karthik.b.s@intel.com>
-
Jani Nikula authored
Sync up with upstream. Signed-off-by: Jani Nikula <jani.nikula@intel.com>
-
- 08 Mar, 2021 6 commits
-
-
Ville Syrjälä authored
Now that all the encoder clock stuff is uniformly abstracted for all hsw+ platforms, let's extend icl_sanitize_encoder_pll_mapping() to cover all of them. Not sure there is a particular benefit in doing so, but less special cases always makes me happy. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-7-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
Support reading out the current state of the DDI clock. Not sure we really want this. Seems a bit excessive just to restore the debug print to icl_sanitize_encoder_pll_mapping()? But maybe there's more use for it? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-6-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
Move the *_get_ddi_pll() stuff into the encodet->get_config() hook. There it neatly sits next to the matching .{enable,disable}_clock() functions. In order to avoid excessive boilerplate I changed the behaviour such that all platforms now do the readout via crtc_state->port_dpll[]. ICL+ TC is still a bit special due to TBTPLL not having a functional .get_freq(). Should probably change that by adopting the LCPLL approach, but that would require a fairly substantial rework of the DPLL ID handling. So leave it for later. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-5-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
All the other places we have use pipes instead of crtc indices when tracking resource usage. Life is easier when we do it the same way always, so switch the dpll mgr to using pipes as well. Looks like it was actually mixing these up in some cases so it would not even have worked correctly except when the device has a contiguous set of pipes starting from pipe A. Granted, that is the typical case but supposedly it may not always hold on modern hw. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-4-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
The clock readout for DDI encoders needs to moved into the encoders. To that end intel_dpll_readout_hw_state() needs to happen after the encoder readout as otherwise it can't correctly populate the PLL crtc_mask/active_mask bitmasks. v2: Populate DPLL ref clocks before the encoder->get_config() Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210225161225.30746-1-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
Ville Syrjälä authored
Stop assuming intel_ddi_get_config() is all we need from the primary encoder, and instead call it via the .get_config() vfunc. This will allow customized .get_config() for the primary, which I plan to use to handle the differences in the clock readout between various platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224144214.24803-2-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>
-
- 06 Mar, 2021 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 21 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use"
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A bit of a mix between fallout from the worker change, cleanups and reductions now possible from that change, and fixes in general. In detail: - Fully serialize manager and worker creation, fixing races due to that. - Clean up some naming that had gone stale. - SQPOLL fixes. - Fix race condition around task_work rework that went into this merge window. - Implement unshare. Used for when the original task does unshare(2) or setuid/seteuid and friends, drops the original workers and forks new ones. - Drop the only remaining piece of state shuffling we had left, which was cred. Move it into issue instead, and we can drop all of that code too. - Kill f_op->flush() usage. That was such a nasty hack that we had out of necessity, we no longer need it. - Following from ->flush() removal, we can also drop various bits of ctx state related to SQPOLL and cancelations. - Fix an issue with IOPOLL retry, which originally was fallout from a filemap change (removing iov_iter_revert()), but uncovered an issue with iovec re-import too late. - Fix an issue with system suspend. - Use xchg() for fallback work, instead of cmpxchg(). - Properly destroy io-wq on exec. - Add create_io_thread() core helper, and use that in io-wq and io_uring. This allows us to remove various silly completion events related to thread setup. - A few error handling fixes. This should be the grunt of fixes necessary for the new workers, next week should be quieter. We've got a pending series from Pavel on cancelations, and how tasks and rings are indexed. Outside of that, should just be minor fixes. Even with these fixes, we're still killing a net ~80 lines" * tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits) io_uring: don't restrict issue_flags for io_openat io_uring: make SQPOLL thread parking saner io-wq: kill hashed waitqueue before manager exits io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return io_uring: don't keep looping for more events if we can't flush overflow io_uring: move to using create_io_thread() kernel: provide create_io_thread() helper io_uring: reliably cancel linked timeouts io_uring: cancel-match based on flags io-wq: ensure all pending work is canceled on exit io_uring: ensure that threads freeze on suspend io_uring: remove extra in_idle wake up io_uring: inline __io_queue_async_work() io_uring: inline io_req_clean_work() io_uring: choose right tctx->io_wq for try cancel io_uring: fix -EAGAIN retry with IOPOLL io-wq: fix error path leak of buffered write hash map io_uring: remove sqo_task io_uring: kill sqo_dead and sqo submission halting io_uring: ignore double poll add on the same waitqueue head ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These fix the usage of device links in the runtime PM core code and update the DTPM (Dynamic Thermal Power Management) feature added recently. Specifics: - Make the runtime PM core code avoid attempting to suspend supplier devices before updating the PM-runtime status of a consumer to 'suspended' (Rafael Wysocki). - Fix DTPM (Dynamic Thermal Power Management) root node initialization and label that feature as EXPERIMENTAL in Kconfig (Daniel Lezcano)" * tag 'pm-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization PM: runtime: Update device status before letting suppliers suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fix from Rafael Wysocki: "Make the empty stubs of some helper functions used when CONFIG_ACPI is not set actually match those functions (Andy Shevchenko)" * tag 'acpi-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: bus: Constify is_acpi_node() and friends (part 2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - Fix a sleeping-while-atomic issue in the AMD IOMMU code - Disable lazy IOTLB flush for untrusted devices in the Intel VT-d driver - Fix status code definitions for Intel VT-d - Fix IO Page Fault issue in Tegra IOMMU driver * tag 'iommu-fixes-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix status code for Allocate/Free PASID command iommu: Don't use lazy flush for untrusted device iommu/tegra-smmu: Fix mc errors on tegra124-nyan iommu/amd: Fix sleeping in atomic in increase_address_space()
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "More regression fixes and stabilization. Regressions: - zoned mode - count zone sizes in wider int types - fix space accounting for read-only block groups - subpage: fix page tail zeroing Fixes: - fix spurious warning when remounting with free space tree - fix warning when creating a directory with smack enabled - ioctl checks for qgroup inheritance when creating a snapshot - qgroup - fix missing unlock on error path in zero range - fix amount of released reservation on error - fix flushing from unsafe context with open transaction, potentially deadlocking - minor build warning fixes" * tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: do not account freed region of read-only block group as zone_unusable btrfs: zoned: use sector_t for zone sectors btrfs: subpage: fix the false data csum mismatch error btrfs: fix warning when creating a directory with smack enabled btrfs: don't flush from btrfs_delayed_inode_reserve_metadata btrfs: export and rename qgroup_reserve_meta btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata btrfs: fix spurious free_space_tree remount warning btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors btrfs: ref-verify: use 'inline void' keyword ordering
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull devicetree fixes from Rob Herring: - Another batch of graph and video-interfaces schema conversions - Drop DT header symlink for dropped C6X arch - Fix bcm2711-hdmi schema error * tag 'devicetree-fixes-for-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: media: Use graph and video-interfaces schemas, round 2 dts: drop dangling c6x symlink dt-bindings: bcm2711-hdmi: Fix broken schema
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Functional fixes: - Fix big endian conversion for arm64 in recordmcount processing - Fix timestamp corruption in ring buffer on discarding events - Fix memory leak in __create_synth_event() - Skip selftests if tracing is disabled as it will cause them to fail. Non-functional fixes: - Fix help text in Kconfig - Remove duplicate prototype for trace_empty() - Fix stale comment about the trace_event_call flags. Self test update: - Add more information to the validation output of when a corrupt timestamp is found in the ring buffer, and also trigger a warning to make sure that tests catch it" * tag 'trace-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix comment about the trace_event_call flags tracing: Skip selftests if tracing is disabled tracing: Fix memory leak in __create_synth_event() ring-buffer: Add a little more information and a WARN when time stamp going backwards is detected ring-buffer: Force before_stamp and write_stamp to be different on discard tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig tracing: Remove duplicate declaration from trace.h ftrace: Have recordmcount use w8 to read relp->r_info in arm64_is_fake_mcount
-
Bob Pearson authored
In rxe_comp.c in rxe_completer() the function free_pkt() did not clear skb which triggered a warning at 'done:' and could possibly at 'exit:'. The WARN_ONCE() calls are not actually needed. The call to free_pkt() is moved to the end to clearly show that all skbs are freed. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Bob Pearson authored
rxe_rcv_mcast_pkt() dropped a reference to ib_device when no error occurred causing an underflow on the reference counter. This code is cleaned up to be clearer and easier to read. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Bob Pearson authored
When the noted patch below extending the reference taken by rxe_get_dev_from_net() in rxe_udp_encap_recv() until each skb is freed it was not matched by a reference in the loopback path resulting in underflows. Fixes: 899aba89 ("RDMA/rxe: Fix FIXME in rxe_udp_encap_recv()") Link: https://lore.kernel.org/r/20210304192048.2958-1-rpearson@hpe.comSigned-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
-
Pavel Begunkov authored
45d189c6 ("io_uring: replace force_nonblock with flags") did something strange for io_openat() slicing all issue_flags but IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the flags. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for 5.12: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy)" * tag 'nvme-5.12-2021-03-05' of git://git.infradead.org/nvme: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST.
-
Jens Axboe authored
We have this weird true/false return from parking, and then some of the callers decide to look at that. It can lead to unbalanced parks and sqd locking. Have the callers check the thread status once it's parked. We know we have the lock at that point, so it's either valid or it's NULL. Fix race with parking on thread exit. We need to be careful here with ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit. Rename sqd->completion to sqd->parked to reflect that this is the only thing this completion event doesn. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
If we race with shutting down the io-wq context and someone queueing a hashed entry, then we can exit the manager with it armed. If it then triggers after the manager has exited, we can have a use-after-free where io_wqe_hash_wake() attempts to wake a now gone manager process. Move the killing of the hashed write queue into the manager itself, so that we know we've killed it before the task exits. Fixes: e941894e ("io-wq: make buffered file write hashed work map per-ctx") Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
The callback can only be armed, if we get -EIOCBQUEUED returned. It's important that we clear the WAITQ bit for other cases, otherwise we can queue for async retry and filemap will assume that we're armed and return -EAGAIN instead of just blocking for the IO. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
It doesn't make sense to wait for more events to come in, if we can't even flush the overflow we already have to the ring. Return -EBUSY for that condition, just like we do for attempts to submit with overflow pending. Cc: stable@vger.kernel.org # 5.11 Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
This allows us to do task creation and setup without needing to use completions to try and synchronize with the starting thread. Get rid of the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup completion events - we can now do setup before the task is running. Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Rafael J. Wysocki authored
* powercap: powercap/drivers/dtpm: Add the experimental label to the option description powercap/drivers/dtpm: Fix root node initialization
-
Ville Syrjälä authored
commit 33267703 ("drm/i915/dsi: Enable software vblank counter") claims to get the mode_flags from the crtc_state, but in fact does not. Fix it to do it right. Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210304170421.10901-5-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
-