- 26 Sep, 2018 34 commits
-
-
Ard Biesheuvel authored
[ Upstream commit 3ea86495 ] The BGRT code validates the contents of the table against the UEFI memory map, and so it expects it to be mapped when the code runs. On ARM, this is currently not the case, since we tear down the early mapping after efi_init() completes, and only create the permanent mapping in arm_enable_runtime_services(), which executes as an early initcall, but still leaves a window where the UEFI memory map is not mapped. So move the call to efi_memmap_unmap() from efi_init() to arm_enable_runtime_services(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> [will: fold in EFI_MEMMAP attribute check from Ard] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
YueHaibing authored
[ Upstream commit fd800f64 ] qe_muram_alloc return a unsigned long integer,which should not compared with zero. check it using IS_ERR_VALUE() to fix this. Fixes: c19b6d24 ("drivers/net: support hdlc function for QE-UCC") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Piotr Sawicki authored
[ Upstream commit 129a9989 ] A socket which has sk_family set to PF_INET6 is able to receive not only IPv6 but also IPv4 traffic (IPv4-mapped IPv6 addresses). Prior to this patch, the smk_skb_to_addr_ipv6() could have been called for socket buffers containing IPv4 packets, in result such traffic was allowed. Signed-off-by:
Piotr Sawicki <p.sawicki2@partner.samsung.com> Signed-off-by:
Casey Schaufler <casey@schaufler-ca.com> Signed-off-by:
-
Manikanta Pubbisetty authored
[ Upstream commit 133bf90d ] As explained in ieee80211_delayed_tailroom_dec(), during roam, keys of the old AP will be destroyed and new keys will be installed. Deletion of the old key causes crypto_tx_tailroom_needed_cnt to go from 1 to 0 and the new key installation causes a transition from 0 to 1. Whenever crypto_tx_tailroom_needed_cnt transitions from 0 to 1, we invoke synchronize_net(); the reason for doing this is to avoid a race in the TX path as explained in increment_tailroom_need_count(). This synchronize_net() operation can be slow and can affect the station roam time. To avoid this, decrementing the crypto_tx_tailroom_needed_cnt is delayed for a while so that upon installation of new key the transition would be from 1 to 2 instead of 0 to 1 and thereby improving the roam time. This is all correct for a STA iftype, but deferring the tailroom_needed decrement for other iftypes may be unnecessary. For example, let's consider the case of a 4-addr client connecting to an AP for which AP_VLAN interface is also created, let the initial value for tailroom_needed on the AP be 1. * 4-addr client connects to the AP (AP: tailroom_needed = 1) * AP will clear old keys, delay decrement of tailroom_needed count * AP_VLAN is created, it takes the tailroom count from master (AP_VLAN: tailroom_needed = 1, AP: tailroom_needed = 1) * Install new key for the station, assume key is plumbed in the HW, there won't be any change in tailroom_needed count on AP iface * Delayed decrement of tailroom_needed count on AP (AP: tailroom_needed = 0, AP_VLAN: tailroom_needed = 1) Because of the delayed decrement on AP iface, tailroom_needed count goes out of sync between AP(master iface) and AP_VLAN(slave iface) and there would be unnecessary tailroom created for the packets going through AP_VLAN iface. Also, WARN_ONs were observed while trying to bring down the AP_VLAN interface: (warn_slowpath_common) (warn_slowpath_null+0x18/0x20) (warn_slowpath_null) (ieee80211_free_keys+0x114/0x1e4) (ieee80211_free_keys) (ieee80211_del_virtual_monitor+0x51c/0x850) (ieee80211_del_virtual_monitor) (ieee80211_stop+0x30/0x3c) (ieee80211_stop) (__dev_close_many+0x94/0xb8) (__dev_close_many) (dev_close_many+0x5c/0xc8) Restricting delayed decrement to station interface alone fixes the problem and it makes sense to do so because delayed decrement is done to improve roam time which is applicable only for client devices. Signed-off-by:
Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Paul Cercueil authored
[ Upstream commit c6ea7e97 ] Having the zload address at 0x8060.0000 means the size of the uncompressed kernel cannot be bigger than around 6 MiB, as it is deflated at address 0x8001.0000. This limit is too small; a kernel with some built-in drivers and things like debugfs enabled will already be over 6 MiB in size, and so will fail to extract properly. To fix this, we bump the zload address from 0x8060.0000 to 0x8100.0000. This is fine, as all the boards featuring Ingenic JZ SoCs have at least 32 MiB of RAM, and use u-boot or compatible bootloaders which won't hardcode the load address but read it from the uImage's header. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19787/ Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit bd90284c ] The intention here is to consume and discard the remaining buffer upon error. This works if there has not been a previous partial write. If there has been, then total_len is no longer total number of bytes to copy. total_len is always "bytes left to copy", so it should be added to written bytes. This code may not be exercised any more if partial writes will not be hit, but this is a small bugfix before a larger change. Reviewed-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit c715fcfd ] For powerpc64, redundant entries in the callchain are filtered out by determining the state of the return address and the stack frame using DWARF debug information. For making these filtering decisions we must analyze the debug information for the location corresponding to the program counter value, i.e. the first entry in the callchain, and not the LR value; otherwise, perf may filter out either the second or the third entry in the callchain incorrectly. This can be observed on a powerpc64le system running Fedora 27 as shown below. Case 1 - Attaching a probe at inet_pton+0x8 (binary offset 0x15af28). Return address is still in LR and a new stack frame is not yet allocated. The LR value, i.e. the second entry, should not be filtered out. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000010eb10 <gaih_inet.constprop.7>: ... 10fa48: 78 bb e4 7e mr r4,r23 10fa4c: 0a 00 60 38 li r3,10 10fa50: d9 b4 04 48 bl 15af28 <inet_pton+0x8> 10fa54: 00 00 00 60 nop 10fa58: ac f4 ff 4b b 10ef04 <gaih_inet.constprop.7+0x3f4> ... 0000000000110450 <getaddrinfo>: ... 1105a8: 54 00 ff 38 addi r7,r31,84 1105ac: 58 00 df 38 addi r6,r31,88 1105b0: 69 e5 ff 4b bl 10eb18 <gaih_inet.constprop.7+0x8> 1105b4: 78 1b 71 7c mr r17,r3 1105b8: 50 01 7f e8 ld r3,336(r31) ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x8 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 4507 [002] 514985.546540: probe_libc:inet_pton: (7fffa7dbaf28) 7fffa7dbaf28 __GI___inet_pton+0x8 (/usr/lib64/libc-2.26.so) 7fffa7d6fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fffa7d705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 13fb52d70 _init+0xbfc (/usr/bin/ping) 7fffa7c836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa7c83898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Case 2 - Attaching a probe at _int_malloc+0x180 (binary offset 0x9cf10). Return address in still in LR and a new stack frame has already been allocated but not used. The caller's caller, i.e. the third entry, is invalid and should be filtered out and not the second one. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000009cd90 <_int_malloc>: 9cd90: 17 00 4c 3c addis r2,r12,23 9cd94: 70 a3 42 38 addi r2,r2,-23696 9cd98: 26 00 80 7d mfcr r12 9cd9c: f8 ff e1 fb std r31,-8(r1) 9cda0: 17 00 e4 3b addi r31,r4,23 9cda4: d8 ff 61 fb std r27,-40(r1) 9cda8: 78 23 9b 7c mr r27,r4 9cdac: 1f 00 bf 2b cmpldi cr7,r31,31 9cdb0: f0 ff c1 fb std r30,-16(r1) 9cdb4: b0 ff c1 fa std r22,-80(r1) 9cdb8: 78 1b 7e 7c mr r30,r3 9cdbc: 08 00 81 91 stw r12,8(r1) 9cdc0: 11 ff 21 f8 stdu r1,-240(r1) 9cdc4: 4c 01 9d 41 bgt cr7,9cf10 <_int_malloc+0x180> 9cdc8: 20 00 a4 2b cmpldi cr7,r4,32 ... 9cf08: 00 00 00 60 nop 9cf0c: 00 00 42 60 ori r2,r2,0 9cf10: e4 06 ff 7b rldicr r31,r31,0,59 9cf14: 40 f8 a4 7f cmpld cr7,r4,r31 9cf18: 68 05 9d 41 bgt cr7,9d480 <_int_malloc+0x6f0> ... 000000000009e3c0 <tcache_init.part.4>: ... 9e420: 40 02 80 38 li r4,576 9e424: 78 fb e3 7f mr r3,r31 9e428: 71 e9 ff 4b bl 9cd98 <_int_malloc+0x8> 9e42c: 00 00 a3 2f cmpdi cr7,r3,0 9e430: 78 1b 7e 7c mr r30,r3 ... 000000000009f7a0 <__libc_malloc>: ... 9f8f8: 00 00 89 2f cmpwi cr7,r9,0 9f8fc: 1c ff 9e 40 bne cr7,9f818 <__libc_malloc+0x78> 9f900: c9 ea ff 4b bl 9e3c8 <tcache_init.part.4+0x8> 9f904: 00 00 00 60 nop 9f908: e8 90 22 e9 ld r9,-28440(r2) ... # perf probe -x /usr/lib64/libc-2.26.so -a _int_malloc+0x180 # perf record -e probe_libc:_int_malloc -g ./test-malloc # perf script Before: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6dd0000 [unknown] (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/testuser/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: test-malloc 6554 [009] 515975.797403: probe_libc:_int_malloc: (7fffa6e6cf10) 7fffa6e6cf10 _int_malloc+0x180 (/usr/lib64/libc-2.26.so) 7fffa6e6e42c tcache_init.part.4+0x6c (/usr/lib64/libc-2.26.so) 7fffa6e6f904 malloc+0x164 (/usr/lib64/libc-2.26.so) 7fffa6e6f9fc malloc+0x25c (/usr/lib64/libc-2.26.so) 100006b4 main+0x38 (/home/sandipan/test-malloc) 7fffa6df36a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fffa6df3898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Maynard Johnson <maynard@us.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: a60335ba ("perf tools powerpc: Adjust callchain based on DWARF debug info") Link: http://lkml.kernel.org/r/24bb726d91ed173aebc972ec3f41a2ef2249434e.1530724939.git.sandipan@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit cd480691 ] For most of Exynos SoCs, Power Management Unit (PMU) address space is mapped into global variable 'pmu_base_addr' very early when initializing PMU interrupt controller. A lot of other machine code depends on it so when doing iounmap() on this address, clear the global as well to avoid usage of invalid value (pointing to unmapped memory region). Properly mapped PMU address space is a requirement for all other machine code so this fix is purely theoretical. Boot will fail immediately in many other places after following this error path. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fredrik Noring authored
[ Upstream commit 1ba0a59c ] I discovered the problem when developing a frame buffer driver for the PlayStation 2 (not yet merged), using the following video modes for the PlayStation 3 in drivers/video/fbdev/ps3fb.c: }, { /* 1080if */ "1080if", 50, 1920, 1080, 13468, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_INTERLACED }, { /* 1080pf */ "1080pf", 50, 1920, 1080, 6734, 148, 484, 36, 4, 88, 5, FB_SYNC_BROADCAST, FB_VMODE_NONINTERLACED }, In ps3fb_probe, the mode_option module parameter is used with fb_find_mode but it can only select the interlaced variant of 1920x1080 since the loop matching the modes does not take the difference between interlaced and progressive modes into account. In short, without the patch, progressive 1920x1080 cannot be chosen as a mode_option parameter since fb_find_mode (falsely) thinks interlace is a perfect match. Signed-off-by:
Fredrik Noring <noring@nocrew.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> [b.zolnierkie: updated patch description] Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Daniel Mack authored
[ Upstream commit b951d80a ] When parsing the video modes from DT properties, make sure to zero out memory before using it. This is important because not all fields in the mode struct are explicitly initialized, even though they are used later on. Fixes: 420a4882 ("video: fbdev: pxafb: initial devicetree conversion") Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Sandipan Das authored
[ Upstream commit 9068533e ] For powerpc64, perf will filter out the second entry in the callchain, i.e. the LR value, if the return address of the function corresponding to the probed location has already been saved on its caller's stack. The state of the return address is determined using debug information. At any point within a function, if the return address is already saved somewhere, a DWARF expression can tell us about its location. If the return address in still in LR only, no DWARF expression would exist. Typically, the instructions in a function's prologue first copy the LR value to R0 and then pushes R0 on to the stack. If LR has already been copied to R0 but R0 is yet to be pushed to the stack, we can still get a DWARF expression that says that the return address is in R0. This is indicating that getting a DWARF expression for the return address does not guarantee the fact that it has already been saved on the stack. This can be observed on a powerpc64le system running Fedora 27 as shown below. # objdump -d /usr/lib64/libc-2.26.so | less ... 000000000015af20 <inet_pton>: 15af20: 0b 00 4c 3c addis r2,r12,11 15af24: e0 c1 42 38 addi r2,r2,-15904 15af28: a6 02 08 7c mflr r0 15af2c: f0 ff c1 fb std r30,-16(r1) 15af30: f8 ff e1 fb std r31,-8(r1) 15af34: 78 1b 7f 7c mr r31,r3 15af38: 78 23 83 7c mr r3,r4 15af3c: 78 2b be 7c mr r30,r5 15af40: 10 00 01 f8 std r0,16(r1) 15af44: c1 ff 21 f8 stdu r1,-64(r1) 15af48: 28 00 81 f8 std r4,40(r1) ... # readelf --debug-dump=frames-interp /usr/lib64/libc-2.26.so | less ... 00027024 0000000000000024 00027028 FDE cie=00000000 pc=000000000015af20..000000000015af88 LOC CFA r30 r31 ra 000000000015af20 r1+0 u u u 000000000015af34 r1+0 c-16 c-8 r0 000000000015af48 r1+64 c-16 c-8 c+16 000000000015af5c r1+0 c-16 c-8 c+16 000000000015af78 r1+0 u u ... # perf probe -x /usr/lib64/libc-2.26.so -a inet_pton+0x18 # perf record -e probe_libc:inet_pton -g ping -6 -c 1 ::1 # perf script Before: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) After: ping 2829 [005] 512917.460174: probe_libc:inet_pton: (7fff7e2baf38) 7fff7e2baf38 __GI___inet_pton+0x18 (/usr/lib64/libc-2.26.so) 7fff7e26fa54 gaih_inet.constprop.7+0xf44 (/usr/lib64/libc-2.26.so) 7fff7e2705b4 getaddrinfo+0x164 (/usr/lib64/libc-2.26.so) 12f152d70 _init+0xbfc (/usr/bin/ping) 7fff7e1836a0 generic_start_main.isra.0+0x140 (/usr/lib64/libc-2.26.so) 7fff7e183898 __libc_start_main+0xb8 (/usr/lib64/libc-2.26.so) 0 [unknown] ([unknown]) Reported-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit b6566b47 ] Fix a build warning in viafbdev.c when CONFIG_PROC_FS is not enabled by marking the unused function as __maybe_unused. ../drivers/video/fbdev/via/viafbdev.c:1471:12: warning: 'viafb_sup_odev_proc_show' defined but not used [-Wunused-function] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Anton Vasilyev authored
[ Upstream commit 5958fde7 ] goldfish_fb_probe() allocates memory for fb, but goldfish_fb_remove() does not have deallocation of fb, which leads to memory leak on probe/remove. The patch adds deallocation into goldfish_fb_remove(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Cc: Aleksandar Markovic <aleksandar.markovic@mips.com> Cc: Miodrag Dinic <miodrag.dinic@mips.com> Cc: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 5ec1ec35 ] The omapfb_register_client[] array has OMAPFB_PLANE_NUM elements so the > should be >= or we are one element beyond the end of the array. Fixes: 8b08cf2b ("OMAP: add TI OMAP framebuffer driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Imre Deak <imre.deak@solidboot.com> Signed-off-by:
-
Bob Peterson authored
[ Upstream commit e79e0e14 ] Before this patch, you could get into situations like this: 1. Process 1 searches for X free blocks, finds them, makes a reservation 2. Process 2 searches for free blocks in the same rgrp, but now the bitmap is full because process 1's reservation is skipped over. So it marks the bitmap as GBF_FULL. 3. Process 1 tries to allocate blocks from its own reservation, but since the GBF_FULL bit is set, it skips over the rgrp and searches elsewhere, thus not using its own reservation. This patch adds an additional check to allow processes to use their own reservations. Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Thomas Richter authored
[ Upstream commit 9ef01124 ] Perf test 40 for example has several subtests numbered 1-4 when displaying the start of the subtest. When the subtest results are displayed the subtests are numbered 0-3. Use this command to generate trace output: [root@s35lp76 perf]# ./perf test -Fv 40 2>/tmp/bpf1 Fix this by adjusting the subtest number when show the subtest result. Output before: [root@s35lp76 perf]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1 40.1: Basic BPF filtering : BPF filter subtest 0: Ok 40.2: BPF pinning : BPF filter subtest 1: Ok 40.3: BPF prologue generation : BPF filter subtest 2: Ok 40.4: BPF relocation checker : BPF filter subtest 3: Ok [root@s35lp76 perf]# Output after: root@s35lp76 ~]# egrep '(^40\.[0-4]| subtest [0-4]:)' /tmp/bpf1 40.1: Basic BPF filtering : BPF filter subtest 1: Ok 40.2: BPF pinning : BPF filter subtest 2: Ok 40.3: BPF prologue generation : BPF filter subtest 3: Ok 40.4: BPF relocation checker : BPF filter subtest 4: Ok [root@s35lp76 ~]# Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180724134858.100644-1-tmricht@linux.ibm.comSigned-off-by:
-
Randy Dunlap authored
[ Upstream commit 1d25e3ee ] Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx". Fixes these build warnings: ../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 536ca245 ] According to "Annex A16: RDMA over Converged Ethernet (RoCE)": A16.4.3 MANAGEMENT INTERFACES As defined in the base specification, a special Queue Pair, QP0 is defined solely for communication between subnet manager(s) and subnet management agents. Since such an IB-defined subnet management architecture is outside the scope of this annex, it follows that there is also no requirement that a port which conforms to this annex be associated with a QP0. Thus, for end nodes designed to conform to this annex, the concept of QP0 is undefined and unused for any port connected to an Ethernet network. CA16-8: A packet arriving at a RoCE port containing a BTH with the destination QP field set to QP0 shall be silently dropped. Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit b509d733 ] The vb2_core_qbuf() function didn't check if q->error was set. It is checked in __buf_prepare(), but that function isn't called if the buffer was already prepared before with VIDIOC_PREPARE_BUF. So check it at the start of vb2_core_qbuf() as well. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Felix Fietkau authored
[ Upstream commit f8a7bfe1 ] This patch disables irq on reboot to fix hang issues that were observed due to pending interrupts. Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
John Crispin <john@phrozen.org> Signed-off-by:
-
John Keeping authored
[ Upstream commit e4975654 ] In pl330_update() when checking if a channel has been aborted, the channel's lock is not taken, only the overall pl330_dmac lock. But in pl330_terminate_all() the aborted flag (req_running==-1) is set under the channel lock and not the pl330_dmac lock. With threaded interrupts, this leads to a potential race: pl330_terminate_all pl330_update ------------------- ------------ lock channel entry lock pl330 _stop channel unlock pl330 lock pl330 check req_running != -1 req_running = -1 _start channel Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Krzysztof Ha?asa authored
[ Upstream commit 5a1a2f63 ] The error path currently calls tw686x_video_free() which requires vc->dev to be initialized, causing a NULL dereference on uninitizalized channels. Fix this by setting the vc->dev fields for all the channels first. Fixes: f8afaa8d ("[media] tw686x: Introduce an interface to support multiple DMA modes") Signed-off-by:
Krzysztof Ha?asa <khalasa@piap.pl> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 9c2af1c7 ] If Make gets a fatal signal while a shell is executing, it may delete the target file that the recipe was supposed to update. This is needed to make sure that it is remade from scratch when Make is next run; if Make is interrupted after the recipe has begun to write the target file, it results in an incomplete file whose time stamp is newer than that of the prerequisites files. Make automatically deletes the incomplete file on interrupt unless the target is marked .PRECIOUS. The situation is just the same as when the shell fails for some reasons. Usually when a recipe line fails, if it has changed the target file at all, the file is corrupted, or at least it is not completely updated. Yet the file’s time stamp says that it is now up to date, so the next time Make runs, it will not try to update that file. However, Make does not cater to delete the incomplete target file in this case. We need to add .DELETE_ON_ERROR somewhere in the Makefile to request it. scripts/Kbuild.include seems a suitable place to add it because it is included from almost all sub-makes. Please note .DELETE_ON_ERROR is not effective for phony targets. The external module building should never ever touch the kernel tree. The following recipe fails if include/generated/autoconf.h is missing. However, include/config/auto.conf is not deleted since it is a phony target. PHONY += include/config/auto.conf include/config/auto.conf: $(Q)test -e include/generated/autoconf.h -a -e $@ || ( \ echo >&2; \ echo >&2 " ERROR: Kernel configuration is invalid."; \ echo >&2 " include/generated/autoconf.h or $@ are missing.";\ echo >&2 " Run 'make oldconfig && make prepare' on kernel src to fix it."; \ echo >&2 ; \ /bin/false) Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Rajan Vaja authored
[ Upstream commit f6dab423 ] Fixed factor clock has two initializations at of_clk_init() time and during platform driver probe. Before of_clk_init() call, node is marked as populated and so its probe never gets called. During of_clk_init() fixed factor clock registration may fail if any of its parent clock is not registered. In this case, it doesn't get chance to retry registration from probe. Clear OF_POPULATED flag if fixed factor clock registration fails so that clock registration is attempted again from probe. Signed-off-by:
Rajan Vaja <rajan.vaja@xilinx.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit 11177e7a ] of_find_compatible_node() is returning a device node with refcount incremented and must be explicitly decremented after the last use which is right after the us in of_iomap() here. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 787b4271 ("clk: imx: add imx6ul clk tree support") Signed-off-by:
-
Andreas Gruenbacher authored
[ Upstream commit 77612578 ] To speed up the common case of appending to a file, gfs2_write_alloc_required presumes that writing beyond the end of a file will always require additional blocks to be allocated. This assumption is incorrect for preallocates files, but there are no negative consequences as long as *some* space is still left on the filesystem. One special file that always has some space preallocated beyond the end of the file is the rindex: when growing a filesystem, gfs2_grow adds one or more new resource groups and appends records describing those resource groups to the rindex; the preallocated space ensures that this is always possible. However, when a filesystem is completely full, gfs2_write_alloc_required will indicate that an additional allocation is required, and appending the next record to the rindex will fail even though space for that record has already been preallocated. To fix that, skip the incorrect optimization in gfs2_write_alloc_required, but for the rindex only. Other writes to preallocated space beyond the end of the file are still allowed to fail on completely full filesystems. Signed-off-by:
-
YueHaibing authored
[ Upstream commit 934ffce1 ] Fix a static code checker warning: net/xfrm/xfrm_policy.c:1836 xfrm_resolve_and_create_bundle() warn: passing zero to 'ERR_PTR' xfrm_tmpl_resolve return 0 just means no xdst found, return NULL instead of passing zero to ERR_PTR. Fixes: d809ec89 ("xfrm: do not assume that template resolving always returns xfrms") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit bd1cd0eb ] AU0828_DEVICE() macro in quirks-table.h uses USB_DEVICE_VENDOR_SPEC() for expanding idVendor and idProduct fields. However, the latter macro adds also match_flags and bInterfaceClass, which are different from the values AU0828_DEVICE() macro sets after that. For fixing them, just expand idVendor and idProduct fields manually in AU0828_DEVICE(). This fixes sparse warnings like: sound/usb/quirks-table.h:2892:1: warning: Initializer entry defined twice Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 7c500f9e ] The default sample sizes set by msnd driver are bogus; it sets ALSA PCM format, not the actual bit width. Signed-off-by:
-
Miao Zhong authored
[ Upstream commit 0d535967 ] When PRI queue occurs overflow, driver should update the OVACKFLG to the PRIQ consumer register, otherwise subsequent PRI requests will not be processed. Cc: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Miao Zhong <zhongmiao@hisilicon.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 5df816e7 ] When initializing the device (procedure init_one), the driver calls mlx5_pci_init to perform pci initialization. As part of this initialization, mlx5_pci_init creates a debugfs directory. If this creation fails, init_one aborts, returning failure to the caller (which is the probe method caller). The main reason for such a failure to occur is if the debugfs directory already exists. This can happen if the last time mlx5_pci_close was called, debugfs_remove (silently) failed due to the debugfs directory not being empty. Guarantee that such a debugfs_remove failure will not occur by instead calling debugfs_remove_recursive in procedure mlx5_pci_close. Fixes: 59211bd3 ("net/mlx5: Split the load/unload flow into hardware and software flows") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
[ Upstream commit 76d5581c ] When the mlx5 health mechanism detects a problem while the driver is in the middle of init_one or remove_one, the driver needs to prevent the health mechanism from scheduling future work; if future work is scheduled, there is a problem with use-after-free: the system WQ tries to run the work item (which has been freed) at the scheduled future time. Prevent this by disabling work item scheduling in the health mechanism when the driver is in the middle of init_one() or remove_one(). Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit cc4dfb7f ] When a rds sock is bound, it is inserted into the bind_hash_table which is protected by RCU. But when releasing rds sock, after it is removed from this hash table, it is freed immediately without respecting RCU grace period. This could cause some use-after-free as reported by syzbot. Mark the rds sock with SOCK_RCU_FREE before inserting it into the bind_hash_table, so that it would be always freed after a RCU grace period. The other problem is in rds_find_bound(), the rds sock could be freed in between rhashtable_lookup_fast() and rds_sock_addref(), so we need to extend RCU read lock protection in rds_find_bound() to close this race condition. Reported-and-tested-by: syzbot+8967084bcac563795dc6@syzkaller.appspotmail.com Reported-by: syzbot+93a5839deb355537440f@syzkaller.appspotmail.com Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oarcle.com> Signed-off-by:
-
Petr Oros authored
[ Upstream commit 9d7f19dc ] DMA allocated memory is lost in be_cmd_get_profile_config() when we call it with non-NULL port_res parameter. Signed-off-by:
Petr Oros <poros@redhat.com> Reviewed-by:
Ivan Vecera <ivecera@redhat.com> Signed-off-by:
-
- 19 Sep, 2018 6 commits
-
-
Greg Kroah-Hartman authored
-
Linus Torvalds authored
commit 7a9cdebd upstream. Jann Horn points out that the vmacache_flush_all() function is not only potentially expensive, it's buggy too. It also happens to be entirely unnecessary, because the sequence number overflow case can be avoided by simply making the sequence number be 64-bit. That doesn't even grow the data structures in question, because the other adjacent fields are already 64-bit. So simplify the whole thing by just making the sequence number overflow case go away entirely, which gets rid of all the complications and makes the code faster too. Win-win. [ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics also just goes away entirely with this ] Reported-by:
Jann Horn <jannh@google.com> Suggested-by:
Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ian Kent authored
commit 0633da48 upstream. autofs_sbi() does not check the superblock magic number to verify it has been given an autofs super block. Backport Note: autofs4 has been renamed to autofs upstream. As a result the upstream patch does not apply cleanly onto 4.14.y. Link: http://lkml.kernel.org/r/153475422934.17131.7563724552005298277.stgit@pluto.themaw.net Reported-by: <syzbot+87c3c541582e56943277@syzkaller.appspotmail.com> Signed-off-by:
Ian Kent <raven@themaw.net> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Wei Yongjun authored
commit 7233982a upstream. Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623 ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Eric Dumazet authored
commit e466af75 upstream. syzkaller reports an out of bound read in strlcpy(), triggered by xt_copy_counters_from_user() Fix this by using memcpy(), then forcing a zero byte at the last position of the destination, as Florian did for the non COMPAT code. Fixes: d7591f0c ("netfilter: x_tables: introduce and use xt_copy_counters_from_user") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Mathias Nyman authored
commit 44a182b9 upstream. KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0; dev->udev will be true even if udev is freed because dev->udev is not set to NULL. set dev->udev pointer to NULL in xhci_free_dev() The original patch went to stable so this fix needs to be applied there as well. Fixes: a400efe4 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: <stable@vger.kernel.org> Reported-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
