- 25 Jul, 2018 14 commits
-
-
Jing Xia authored
commit 9f15bde6 upstream. It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by:
Jing Xia <jing.xia.mail@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <chunyan.zhang@unisoc.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vineet Gupta authored
commit 93312b6d upstream. mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit 64234961 upstream. We used to have pre-set CONFIG_INITRAMFS_SOURCE with local path to intramfs in ARC defconfigs. This was quite convenient for in-house development but not that convenient for newcomers who obviusly don't have folders like "arc_initramfs" next to the Linux source tree. Which leads to quite surprising failure of defconfig building: ------------------------------->8----------------------------- ../scripts/gen_initramfs_list.sh: Cannot open '../../arc_initramfs_hs/' ../usr/Makefile:57: recipe for target 'usr/initramfs_data.cpio.gz' failed make[2]: *** [usr/initramfs_data.cpio.gz] Error 1 ------------------------------->8----------------------------- So now when more and more people start to deal with our defconfigs let's make their life easier with removal of CONFIG_INITRAMFS_SOURCE. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alexey Brodkin authored
commit 6e376114 upstream. swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by:
-
Vineet Gupta authored
commit af1fc5ba upstream. This manifsted as strace segfaulting on HSDK because gcc was targetting the accumulator registers as GPRs, which kernek was not saving/restoring by default. Cc: stable@vger.kernel.org #4.14+ Signed-off-by:
-
Po-Hsu Lin authored
commit 9a6249d2 upstream. Audio mute led does not work on HP ProBook 455 G5, this can be fixed by using CXT_FIXUP_MUTE_LED_GPIO to support it. BugLink: https://bugs.launchpad.net/bugs/1781763 Reported-by: James Buren Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
YOKOTA Hiroshi authored
commit 0fca97a2 upstream. This adds some required quirk when uses headset or headphone on Panasonic CF-SZ6. Signed-off-by:
YOKOTA Hiroshi <yokota.hgml@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit 39675f7a upstream. The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
OGAWA Hirofumi authored
commit 35033ab9 upstream. In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dewet Thibaut authored
commit fbdb328c upstream. commit b3b7c479 ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c479 ("x86/MCE: Serialize sysfs changes") Signed-off-by:
Dewet Thibaut <thibaut.dewet@nokia.com> Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> [ Massage commit message. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180716084927.24869-1-alexander.sverdlin@nokia.comSigned-off-by:
-
Hugh Dickins authored
commit 2c991e40 upstream. Markus reported that BTS is sporadically missing the tail of the trace in the perf_event data buffer: [decode error (1): instruction overflow] shown in GDB; and bisected it to the conversion of debug_store to PTI. A little "optimization" crept into alloc_bts_buffer(), which mistakenly placed bts_interrupt_threshold away from the 24-byte record boundary. Intel SDM Vol 3B 17.4.9 says "This address must point to an offset from the BTS buffer base that is a multiple of the BTS record size." Revert "max" from a byte count to a record count, to calculate the bts_interrupt_threshold correctly: which turns out to fix problem seen. Fixes: c1961a46 ("x86/events/intel/ds: Map debug buffers in cpu_entry_area") Reported-and-tested-by:
Markus T Metzger <markus.t.metzger@intel.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Ville Syrjälä authored
commit 6f6060a5 upstream. APM_DO_POP_SEGS does not restore fs/gs which were zeroed by APM_DO_ZERO_SEGS. Trying to access __preempt_count with zeroed fs doesn't really work. Move the ibrs call outside the APM_DO_SAVE_SEGS/APM_DO_RESTORE_SEGS invocations so that fs is actually restored before calling preempt_enable(). Fixes the following sort of oopses: [ 0.313581] general protection fault: 0000 [#1] PREEMPT SMP [ 0.313803] Modules linked in: [ 0.314040] CPU: 0 PID: 268 Comm: kapmd Not tainted 4.16.0-rc1-triton-bisect-00090-gdd84441a #19 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 [ 0.316161] EFLAGS: 00210016 CPU: 0 [ 0.316161] EAX: 00000102 EBX: 00000000 ECX: 00000102 EDX: 00000000 [ 0.316161] ESI: 0000530e EDI: dea95f64 EBP: dea95f18 ESP: dea95ef0 [ 0.316161] DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 [ 0.316161] CR0: 80050033 CR2: 00000000 CR3: 015d3000 CR4: 000006d0 [ 0.316161] Call Trace: [ 0.316161] ? cpumask_weight.constprop.15+0x20/0x20 [ 0.316161] on_cpu0+0x44/0x70 [ 0.316161] apm+0x54e/0x720 [ 0.316161] ? __switch_to_asm+0x26/0x40 [ 0.316161] ? __schedule+0x17d/0x590 [ 0.316161] kthread+0xc0/0xf0 [ 0.316161] ? proc_apm_show+0x150/0x150 [ 0.316161] ? kthread_create_worker_on_cpu+0x20/0x20 [ 0.316161] ret_from_fork+0x2e/0x38 [ 0.316161] Code: da 8e c2 8e e2 8e ea 57 55 2e ff 1d e0 bb 5d b1 0f 92 c3 5d 5f 07 1f 89 47 0c 90 8d b4 26 00 00 00 00 90 8d b4 26 00 00 00 00 90 <64> ff 0d 84 16 5c b1 74 7f 8b 45 dc 8e e0 8b 45 d8 8e e8 8b 45 [ 0.316161] EIP: __apm_bios_call_simple+0xc8/0x170 SS:ESP: 0068:dea95ef0 [ 0.316161] ---[ end trace 656253db2deaa12c ]--- Fixes: dd84441a ("x86/speculation: Use IBRS if available before calling into firmware") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lan Tianyu authored
commit b5020a8e upstream. Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Damien Le Moal authored
commit f13cff6c upstream. Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@kernel.org Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
- 22 Jul, 2018 26 commits
-
-
Greg Kroah-Hartman authored
-
Tejun Heo authored
commit 08a77676 upstream. e7fd37ba ("cgroup: avoid copying strings longer than the buffers") converted possibly unsafe strncpy() usages in cgroup to strscpy(). However, although the callsites are completely fine with truncated copied, because strscpy() is marked __must_check, it led to the following warnings. kernel/cgroup/cgroup.c: In function ‘cgroup_file_name’: kernel/cgroup/cgroup.c:1400:10: warning: ignoring return value of ‘strscpy’, declared with attribute warn_unused_result [-Wunused-result] strscpy(buf, cft->name, CGROUP_FILE_NAME_MAX); ^ To avoid the warnings, 50034ed4 ("cgroup: use strlcpy() instead of strscpy() to avoid spurious warning") switched them to strlcpy(). strlcpy() is worse than strlcpy() because it unconditionally runs strlen() on the source string, and the only reason we switched to strlcpy() here was because it was lacking __must_check, which doesn't reflect any material differences between the two function. It's just that someone added __must_check to strscpy() and not to strlcpy(). These basic string copy operations are used in variety of ways, and one of not-so-uncommon use cases is safely handling truncated copies, where the caller naturally doesn't care about the return value. The __must_check doesn't match the actual use cases and forces users to opt for inferior variants which lack __must_check by happenstance or spread ugly (void) casts. Remove __must_check from strscpy() and restore strscpy() usages in cgroup. Signed-off-by:
Tejun Heo <tj@kernel.org> Suggested-by:
-
Marc Zyngier authored
commit 5d81f7dc upstream. Now that all our infrastructure is in place, let's expose the availability of ARCH_WORKAROUND_2 to guests. We take this opportunity to tidy up a couple of SMCCC constants. Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit b4f18c06 upstream. In order to forward the guest's ARCH_WORKAROUND_2 calls to EL3, add a small(-ish) sequence to handle it at EL2. Special care must be taken to track the state of the guest itself by updating the workaround flags. We also rely on patching to enable calls into the firmware. Note that since we need to execute branches, this always executes after the Spectre-v2 mitigation has been applied. Reviewed-by:
-
Marc Zyngier authored
commit 55e3748e upstream. In order to offer ARCH_WORKAROUND_2 support to guests, we need a bit of infrastructure. Let's add a flag indicating whether or not the guest uses SSBD mitigation. Depending on the state of this flag, allow KVM to disable ARCH_WORKAROUND_2 before entering the guest, and enable it when exiting it. Reviewed-by:
-
Marc Zyngier authored
commit 85478bab upstream. As we're going to require to access per-cpu variables at EL2, let's craft the minimum set of accessors required to implement reading a per-cpu variable, relying on tpidr_el2 to contain the per-cpu offset. Reviewed-by:
-
Marc Zyngier authored
commit 9cdc0108 upstream. If running on a system that performs dynamic SSBD mitigation, allow userspace to request the mitigation for itself. This is implemented as a prctl call, allowing the mitigation to be enabled or disabled at will for this particular thread. Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 9dd9614f upstream. In order to allow userspace to be mitigated on demand, let's introduce a new thread flag that prevents the mitigation from being turned off when exiting to userspace, and doesn't turn it on on entry into the kernel (with the assumption that the mitigation is always enabled in the kernel itself). This will be used by a prctl interface introduced in a later patch. Reviewed-by:
-
Marc Zyngier authored
commit 647d0519 upstream. On a system where firmware can dynamically change the state of the mitigation, the CPU will always come up with the mitigation enabled, including when coming back from suspend. If the user has requested "no mitigation" via a command line option, let's enforce it by calling into the firmware again to disable it. Similarily, for a resume from hibernate, the mitigation could have been disabled by the boot kernel. Let's ensure that it is set back on in that case. Acked-by:
-
Marc Zyngier authored
commit 986372c4 upstream. In order to avoid checking arm64_ssbd_callback_required on each kernel entry/exit even if no mitigation is required, let's add yet another alternative that by default jumps over the mitigation, and that gets nop'ed out if we're doing dynamic mitigation. Think of it as a poor man's static key... Reviewed-by:
Julien Grall <julien.grall@arm.com> Reviewed-by:
-
Marc Zyngier authored
commit c32e1736 upstream. We're about to need the mitigation state in various parts of the kernel in order to do the right thing for userspace and guests. Let's expose an accessor that will let other subsystems know about the state. Reviewed-by:
-
Marc Zyngier authored
commit a43ae4df upstream. On a system where the firmware implements ARCH_WORKAROUND_2, it may be useful to either permanently enable or disable the workaround for cases where the user decides that they'd rather not get a trap overhead, and keep the mitigation permanently on or off instead of switching it on exception entry/exit. In any case, default to the mitigation being enabled. Reviewed-by:
-
Marc Zyngier authored
commit a725e3dd upstream. As for Spectre variant-2, we rely on SMCCC 1.1 to provide the discovery mechanism for detecting the SSBD mitigation. A new capability is also allocated for that purpose, and a config option. Reviewed-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Marc Zyngier authored
commit 5cf9ce6e upstream. In a heterogeneous system, we can end up with both affected and unaffected CPUs. Let's check their status before calling into the firmware. Reviewed-by:
-
Marc Zyngier authored
commit 8e290624 upstream. In order for the kernel to protect itself, let's call the SSBD mitigation implemented by the higher exception level (either hypervisor or firmware) on each transition between userspace and kernel. We must take the PSCI conduit into account in order to target the right exception level, hence the introduction of a runtime patching callback. Reviewed-by:
-
Marc Zyngier authored
commit eff0e9e1 upstream. We've so far used the PSCI return codes for SMCCC because they were extremely similar. But with the new ARM DEN 0070A specification, "NOT_REQUIRED" (-2) is clashing with PSCI's "PSCI_RET_INVALID_PARAMS". Let's bite the bullet and add SMCCC specific return codes. Users can be repainted as and when required. Acked-by:
-
Christoffer Dall authored
Commit 4464e210 upstream. We already have the percpu area for the host cpu state, which points to the VCPU, so there's no need to store the VCPU pointer on the stack on every context switch. We can be a little more clever and just use tpidr_el2 for the percpu offset and load the VCPU pointer from the host context. This has the benefit of being able to retrieve the host context even when our stack is corrupted, and it has a potential performance benefit because we trade a store plus a load for an mrs and a load on a round trip to the guest. This does require us to calculate the percpu offset without including the offset from the kernel mapping of the percpu array to the linear mapping of the array (which is what we store in tpidr_el1), because a PC-relative generated address in EL2 is already giving us the hyp alias of the linear mapping of a kernel address. We do this in __cpu_init_hyp_mode() by using kvm_ksym_ref(). The code that accesses ESR_EL2 was previously using an alternative to use the _EL1 accessor on VHE systems, but this was actually unnecessary as the _EL1 accessor aliases the ESR_EL2 register on VHE, and the _EL2 accessor does the same thing on both systems. Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Marc Zyngier authored
Commit 44a497ab upstream. kvm_vgic_global_state is part of the read-only section, and is usually accessed using a PC-relative address generation (adrp + add). It is thus useless to use kern_hyp_va() on it, and actively problematic if kern_hyp_va() becomes non-idempotent. On the other hand, there is no way that the compiler is going to guarantee that such access is always PC relative. So let's bite the bullet and provide our own accessor. Acked-by:
James Morse <james.morse@arm.com> Signed-off-by:
-
Marc Zyngier authored
Commit dea5e2a4 upstream. We've so far relied on a patching infrastructure that only gave us a single alternative, without any way to provide a range of potential replacement instructions. For a single feature, this is an all or nothing thing. It would be interesting to have a more flexible grained way of patching the kernel though, where we could dynamically tune the code that gets injected. In order to achive this, let's introduce a new form of dynamic patching, assiciating a callback to a patching site. This callback gets source and target locations of the patching request, as well as the number of instructions to be patched. Dynamic patching is declared with the new ALTERNATIVE_CB and alternative_cb directives: asm volatile(ALTERNATIVE_CB("mov %0, #0\n", callback) : "r" (v)); or alternative_cb callback mov x0, #0 alternative_cb_end where callback is the C function computing the alternative. Reviewed-by:
-
James Morse authored
Commit 1f742679 upstream. Now that a VHE host uses tpidr_el2 for the cpu offset we no longer need KVM to save/restore tpidr_el1. Move this from the 'common' code into the non-vhe code. While we're at it, on VHE we don't need to save the ELR or SPSR as kernel_entry in entry.S will have pushed these onto the kernel stack, and will restore them from there. Move these to the non-vhe code as we need them to get back to the host. Finally remove the always-copy-tpidr we hid in the stage2 setup code, cpufeature's enable callback will do this for VHE, we only need KVM to do it for non-vhe. Add the copy into kvm-init instead. Signed-off-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
James Morse authored
Commit 6d99b689 upstream. Now that KVM uses tpidr_el2 in the same way as Linux's cpu_offset in tpidr_el1, merge the two. This saves KVM from save/restoring tpidr_el1 on VHE hosts, and allows future code to blindly access per-cpu variables without triggering world-switch. Signed-off-by:
-
James Morse authored
Commit c97e166e upstream. Make tpidr_el2 a cpu-offset for per-cpu variables in the same way the host uses tpidr_el1. This lets tpidr_el{1,2} have the same value, and on VHE they can be the same register. KVM calls hyp_panic() when anything unexpected happens. This may occur while a guest owns the EL1 registers. KVM stashes the vcpu pointer in tpidr_el2, which it uses to find the host context in order to restore the host EL1 registers before parachuting into the host's panic(). The host context is a struct kvm_cpu_context allocated in the per-cpu area, and mapped to hyp. Given the per-cpu offset for this CPU, this is easy to find. Change hyp_panic() to take a pointer to the struct kvm_cpu_context. Wrap these calls with an asm function that retrieves the struct kvm_cpu_context from the host's per-cpu area. Copy the per-cpu offset from the hosts tpidr_el1 into tpidr_el2 during kvm init. (Later patches will make this unnecessary for VHE hosts) We print out the vcpu pointer as part of the panic message. Add a back reference to the 'running vcpu' in the host cpu context to preserve this. Signed-off-by:
-
James Morse authored
Commit 36989e7f upstream. kvm_host_cpu_state is a per-cpu allocation made from kvm_arch_init() used to store the host EL1 registers when KVM switches to a guest. Make it easier for ASM to generate pointers into this per-cpu memory by making it a static allocation. Signed-off-by:
-
James Morse authored
Commit 32b03d10 upstream. KVM uses tpidr_el2 as its private vcpu register, which makes sense for non-vhe world switch as only KVM can access this register. This means vhe Linux has to use tpidr_el1, which KVM has to save/restore as part of the host context. If the SDEI handler code runs behind KVMs back, it mustn't access any per-cpu variables. To allow this on systems with vhe we need to make the host use tpidr_el2, saving KVM from save/restoring it. __guest_enter() stores the host_ctxt on the stack, do the same with the vcpu. Signed-off-by:
-
Tetsuo Handa authored
commit 3bc53be9 upstream. syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Santosh Shilimkar authored
commit f1693c63 upstream. Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Reviewed-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
