- 22 Mar, 2018 40 commits
-
-
SeongJae Park authored
[ Upstream commit 2adfa421 ] The 'configinit.sh' script checks the format of optional argument for the build directory, printing an error message if the format is not valid. However, the error message uses the wrong variable, indicating an empty string even though the user entered a non-empty (but erroneous) string. This commit fixes the script to use the correct variable. Fixes: c87b9c60 ("rcutorture: Add KVM-based test framework") Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mahesh Bandewar authored
[ Upstream commit 92ff4264 ] Packets that don't have dest mac as the mac of the master device should not be entertained by the IPvlan rx-handler. This is mostly true as the packet path mostly takes care of that, except when the master device is a virtual device. As demonstrated in the following case - ip netns add ns1 ip link add ve1 type veth peer name ve2 ip link add link ve2 name iv1 type ipvlan mode l2 ip link set dev iv1 netns ns1 ip link set ve1 up ip link set ve2 up ip -n ns1 link set iv1 up ip addr add 192.168.10.1/24 dev ve1 ip -n ns1 addr 192.168.10.2/24 dev iv1 ping -c2 192.168.10.2 <Works!> ip neigh show dev ve1 ip neigh show 192.168.10.2 lladdr <random> dev ve1 ping -c2 192.168.10.2 <Still works! Wrong!!> This patch adds that missing check in the IPvlan rx-handler. Reported-by:
Amit Sikka <amit.sikka@ericsson.com> Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 65a12b3a ] We should be finishing the loop with timeout set to zero but because this is a post-op we finish with timeout == -1. Fixes: 1082e270 ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Luca Coelho authored
[ Upstream commit c7976f52 ] In the ieee80211_setup_sdata() we check if the interface type is valid and, if not, call BUG(). This should never happen, but if there is something wrong with the code, it will not be caught until the bug happens when an interface is being set up. Calling BUG() is too extreme for this and a WARN_ON() would be better used instead. Change that. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Adiel Aloni authored
[ Upstream commit e16ea4bb ] Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll, only if PS_ENABLED was set before. This is required due to commit c9491367b759 ("mac80211: always update the PM state of a peer on MGMT / DATA frames") that enforces the ap to check only mgmt/data frames ps bit, and then update station's power save accordingly. When sending only ps-poll (control frame) the ap will not be aware that the station entered power save. Setting ps enable before triggering ps_poll, will send NDP with PM bit enabled first. Signed-off-by:
Adiel Aloni <adiel.aloni@intel.com> Signed-off-by:
-
Chris Wilson authored
[ Upstream commit 8516673a ] Before accessing the GGTT we must flush the PTE writes and make them visible to the chipset, or else the indirect access may end up in the wrong page. In commit 3497971a ("agp/intel: Flush chipset writes after updating a single PTE"), we noticed corruption of the uploads for pwrite and for capturing GPU error states, but it was presumed that the explicit calls to intel_gtt_chipset_flush() were sufficient for the execbuffer path. However, we have not been flushing the chipset between the PTE writes and access via the GTT itself. For simplicity, do the flush after any PTE update rather than try and batch the flushes on a just-in-time basis. References: 3497971a ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.ukSigned-off-by:
-
Yong Zhao authored
[ Upstream commit 5108d768 ] Kobject created using kobject_create_and_add() can be freed using kobject_put() when there is no referenece any more. However, kobject memory allocated with kzalloc() has to set up a release callback in order to free it when the counter decreases to 0. Otherwise it causes memory leak. Signed-off-by:
Yong Zhao <yong.zhao@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Stephen Hemminger authored
[ Upstream commit 72d24955 ] When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit d5ac225c ] The cam->buffers[] array has cam->num_frames elements so the > needs to be changed to >= to avoid going beyond the end of the array. The ->buffers[] array is allocated in cpia2_allocate_buffers() if you want to confirm. Fixes: ab33d507 ("V4L/DVB (3376): Add cpia2 camera support") Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit 4b3aec2b ] Add IBM 3542 and 3552, arrays: FAStT200 and FAStT500. Add full STK OPENstorage family, arrays: 9176, D173, D178, D210, D220, D240 and D280. Add STK BladeCtlr family, arrays: B210, B220, B240 and B280. These changes were done in multipath-tools time ago. Cc: NetApp RDAC team <ng-eseries-upstream-maintainers@netapp.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christophe Varoqui <christophe.varoqui@opensvc.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Cc: device-mapper development <dm-devel@redhat.com> Signed-off-by:
Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Xose Vazquez Perez authored
[ Upstream commit b369a047 ] Commit 56f3d383 ("scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry") modified some Hitachi entries: HITACHI is always supporting VPD pages, even though it's claiming to support SCSI Revision 3 only. The same should have been done also for HP-rebranded. [mkp: checkpatch and tweaked commit message] Cc: Hannes Reinecke <hare@suse.de> Cc: Takahiro Yasui <takahiro.yasui@hds.com> Cc: Matthias Rudolph <Matthias.Rudolph@hitachivantara.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: SCSI ML <linux-scsi@vger.kernel.org> Signed-off-by:
-
Bart Van Assche authored
[ Upstream commit a44c9d36 ] Since scsi_get_device_flags_keyed() callers do not check whether or not the returned value is an error code, change that function such that it returns a flags value even if the 'key' argument is invalid. Note: since commit 28a0bc41 ("scsi: sd: Implement blacklist option for WRITE SAME w/ UNMAP") bit 31 is a valid device information flag so checking whether bit 31 is set in the return value is not sufficient to tell the difference between an error code and a flags value. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Tobias Jordan authored
[ Upstream commit 2d9bbd02 ] sun6i_spi_probe() uses sun6i_spi_runtime_resume() to prepare/enable clocks, so sun6i_spi_remove() should use sun6i_spi_runtime_suspend() to disable/unprepare them if we're not suspended. Replacing pm_runtime_disable() by pm_runtime_force_suspend() will ensure that sun6i_spi_runtime_suspend() is called if needed. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3558fe90 (spi: sunxi: Add Allwinner A31 SPI controller driver) Signed-off-by:
Tobias Jordan <Tobias.Jordan@elektrobit.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Julien BOIBESSOT authored
[ Upstream commit 77be4c87 ] Indeed musl doesn't define old SIGCLD signal name but only new one SIGCHLD. SIGCHLD is the new POSIX name for that signal so it doesn't change anything on other libcs. This fixes this kind of build error: usbipd.c: In function ‘set_signal’: usbipd.c:459:12: error: 'SIGCLD' undeclared (first use in this function) sigaction(SIGCLD, &act, NULL); ^~~~~~ usbipd.c:459:12: note: each undeclared identifier is reported only once for each function it appears in Makefile:407: recipe for target 'usbipd.o' failed make[3]: *** [usbipd.o] Error 1 Signed-off-by:
Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Ben Greear authored
[ Upstream commit 8cec57f5 ] The 10.4 firmware defines this as a 3-bit field, as does the mac80211 stack. The 4th bit is defined as CONF_IMPLICIT_BF at least in the firmware header I have seen. This patch fixes the ath10k wmi header to match the firmware. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Srinivas Kandagatla authored
[ Upstream commit d8e488e8 ] This patch fixes missing mnd_width for codec_digital clk, this is now set to 8 inline with datasheet. Fixes: 3966fab8 ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit a8b149d3 ] It is possible to remove a cpufreq governor module after cpufreq_parse_governor() has returned success in store_scaling_governor() and before cpufreq_set_policy() acquires a reference to it, because the governor list is not protected during that period and nothing prevents the governor from being unregistered then. Prevent that from happening by acquiring an extra reference to the governor module temporarily in cpufreq_parse_governor(), under cpufreq_governor_mutex, and dropping it in store_scaling_governor(), when cpufreq_set_policy() returns. Note that the second cpufreq_parse_governor() call site is fine, because it only cares about the policy member of new_policy. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Manikanta Pubbisetty authored
[ Upstream commit 424ea0d1 ] It is required to update the teardown state of the peer when a tdls link with that peer is terminated. This information is useful for the target to perform some cleanups wrt the tdls peer. Without proper cleanup, target assumes that the peer is connected and blocks future connection requests, updating the teardown state of the peer addresses the problem. Tested this change on QCA9888 with 10.4-3.5.1-00018 fw version. Signed-off-by:
Manikanta Pubbisetty <mpubbise@qti.qualcomm.com> Signed-off-by:
-
Andrew F. Davis authored
[ Upstream commit 7be4b5dc ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 14e3e295 ("ARM: dts: omap3-n900: Add TLV320AIC3X support") Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Andrew F. Davis authored
[ Upstream commit e153db03 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by:
-
Miquel Raynal authored
[ Upstream commit df467899 ] Some drivers (like nand_hynix.c) call ->cmdfunc() with NAND_CMD_NONE and a column address and expect the controller to only send address cycles. Right now, the default ->cmdfunc() implementations provided by the core do not filter out the command cycle in this case and forwards the request to the controller driver through the ->cmd_ctrl() method. The thing is, NAND controller drivers can get this wrong and send a command cycle with a NAND_CMD_NONE opcode and since NAND_CMD_NONE is -1, and the command field is usually casted to an u8, we end up sending the 0xFF command which is actually a RESET operation. Add conditions in nand_command[_lp]() functions to sending the initial command cycle when command == NAND_CMD_NONE. Signed-off-by:
Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Lorenzo Colitti authored
[ Upstream commit be8f8284 ] Currently it is possible to add or update socket policies, but not clear them. Therefore, once a socket policy has been applied, the socket cannot be used for unencrypted traffic. This patch allows (privileged) users to clear socket policies by passing in a NULL pointer and zero length argument to the {IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both the incoming and outgoing policies being cleared. The simple approach taken in this patch cannot clear socket policies in only one direction. If desired this could be added in the future, for example by continuing to pass in a length of zero (which currently is guaranteed to return EMSGSIZE) and making the policy be a pointer to an integer that contains one of the XFRM_POLICY_{IN,OUT} enum values. An alternative would have been to interpret the length as a signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output policy. Tested: https://android-review.googlesource.com/539816Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Luis R. Rodriguez authored
[ Upstream commit 65c79230 ] The file /sys/module/firmware_class/parameters/path can be used to set a custom firmware path. The fw_filesystem.sh script creates a temporary directory to add a test firmware file to be used during testing, in order for this to work it uses the custom path syfs file and it was supposed to reset back the file on execution exit. The script failed to do this due to a typo, it was using OLD_PATH instead of OLD_FWPATH, since its inception since v3.17. Its not as easy to just keep the old setting, it turns out that resetting an empty setting won't actually do what we want, we need to check if it was empty and set an empty space. Without this we end up having the temporary path always set after we run these tests. Fixes: 0a8adf58 ("test: add firmware_class loader test") Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit a0982dfa ] The rcutorture test suite occasionally provokes a splat due to invoking resched_cpu() on an offline CPU: WARNING: CPU: 2 PID: 8 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 2 PID: 8 Comm: rcu_preempt Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff902ede9daf00 task.stack: ffff96c50010c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffff96c50010fdb8 EFLAGS: 00010096 RAX: 000000000000002e RBX: ffff902edaab4680 RCX: 0000000000000003 RDX: 0000000080000003 RSI: 0000000000000000 RDI: 00000000ffffffff RBP: ffff96c50010fdb8 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000000 R11: 00000000299f36ae R12: 0000000000000001 R13: ffffffff9de64240 R14: 0000000000000001 R15: ffffffff9de64240 FS: 0000000000000000(0000) GS:ffff902edfc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000f7d4c642 CR3: 000000001e0e2000 CR4: 00000000000006e0 Call Trace: resched_curr+0x8f/0x1c0 resched_cpu+0x2c/0x40 rcu_implicit_dynticks_qs+0x152/0x220 force_qs_rnp+0x147/0x1d0 ? sync_rcu_exp_select_cpus+0x450/0x450 rcu_gp_kthread+0x5a9/0x950 kthread+0x142/0x180 ? force_qs_rnp+0x1d0/0x1d0 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x27/0x40 Code: 14 01 0f 92 c0 84 c0 74 14 48 8b 05 14 4f f4 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 38 89 ca 9d e8 e5 56 08 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 52 9e 37 02 85 c0 75 38 55 48 ---[ end trace 26df9e5df4bba4ac ]--- This splat cannot be generated by expedited grace periods because they always invoke resched_cpu() on the current CPU, which is good because expedited grace periods require that resched_cpu() unconditionally succeed. However, other parts of RCU can tolerate resched_cpu() acting as a no-op, at least as long as it doesn't happen too often. This commit therefore makes resched_cpu() invoke resched_curr() only if the CPU is either online or is the current CPU. Signed-off-by:
-
Paul E. McKenney authored
[ Upstream commit 2fe25826 ] The rcutorture test suite occasionally provokes a splat due to invoking rt_mutex_lock() which needs to boost the priority of a task currently sitting on a runqueue that belongs to an offline CPU: WARNING: CPU: 0 PID: 12 at /home/paulmck/public_git/linux-rcu/arch/x86/kernel/smp.c:128 native_smp_send_reschedule+0x37/0x40 Modules linked in: CPU: 0 PID: 12 Comm: rcub/7 Not tainted 4.14.0-rc4+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff9ed3de5f8cc0 task.stack: ffffbbf80012c000 RIP: 0010:native_smp_send_reschedule+0x37/0x40 RSP: 0018:ffffbbf80012fd10 EFLAGS: 00010082 RAX: 000000000000002f RBX: ffff9ed3dd9cb300 RCX: 0000000000000004 RDX: 0000000080000004 RSI: 0000000000000086 RDI: 00000000ffffffff RBP: ffffbbf80012fd10 R08: 000000000009da7a R09: 0000000000007b9d R10: 0000000000000001 R11: ffffffffbb57c2cd R12: 000000000000000d R13: ffff9ed3de5f8cc0 R14: 0000000000000061 R15: ffff9ed3ded59200 FS: 0000000000000000(0000) GS:ffff9ed3dea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000080686f0 CR3: 000000001b9e0000 CR4: 00000000000006f0 Call Trace: resched_curr+0x61/0xd0 switched_to_rt+0x8f/0xa0 rt_mutex_setprio+0x25c/0x410 task_blocks_on_rt_mutex+0x1b3/0x1f0 rt_mutex_slowlock+0xa9/0x1e0 rt_mutex_lock+0x29/0x30 rcu_boost_kthread+0x127/0x3c0 kthread+0x104/0x140 ? rcu_report_unblock_qs_rnp+0x90/0x90 ? kthread_create_on_node+0x40/0x40 ret_from_fork+0x22/0x30 Code: f0 00 0f 92 c0 84 c0 74 14 48 8b 05 34 74 c5 00 be fd 00 00 00 ff 90 a0 00 00 00 5d c3 89 fe 48 c7 c7 a0 c6 fc b9 e8 d5 b5 06 00 <0f> ff 5d c3 0f 1f 44 00 00 8b 05 a2 d1 13 02 85 c0 75 38 55 48 But the target task's priority has already been adjusted, so the only purpose of switched_to_rt() invoking resched_curr() is to wake up the CPU running some task that needs to be preempted by the boosted task. But the CPU is offline, which presumably means that the task must be migrated to some other CPU, and that this other CPU will undertake any needed preemption at the time of migration. Because the runqueue lock is held when resched_curr() is invoked, we know that the boosted task cannot go anywhere, so it is not necessary to invoke resched_curr() in this particular case. This commit therefore makes switched_to_rt() refrain from invoking resched_curr() when the target CPU is offline. Signed-off-by:
-
Simon Shields authored
[ Upstream commit 1b377924 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae845 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by:
Simon Shields <simon@lineageos.org> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Jiri Kosina authored
[ Upstream commit 9abd04af ] ELO devices have one Button usage in GenDesk field, which makes hid-input map it to BTN_LEFT; that confuses userspace, which then considers the device to be a mouse/touchpad instead of touchscreen. Fix that by unmapping BTN_LEFT and keeping only BTN_TOUCH in place. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Ville Syrjälä authored
[ Upstream commit 593f4b19 ] HDMI 2.0 Appendix F suggest that we should keep sending the infoframe when switching from 3D to 2D mode, even if the infoframe isn't strictly necessary (ie. not needed to transmit the VIC or stereo information). This is a workaround against some sinks that fail to realize that they should switch from 3D to 2D mode when the source stop transmitting the infoframe. v2: Handle unpack() as well Pull the length calculation into a helper Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> #v1 Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.syrjala@linux.intel.comReviewed-by:
Shashank Sharma <shashank.sharma@intel.com> Signed-off-by:
-
Jani Nikula authored
[ Upstream commit 1d1c3665 ] Since drm_edid_to_eld() knows the connector type, we can set the type in ELD while at it. Most connectors this gets called on are not DP encoders, and with the HDMI type being 0, this does not change behaviour for non-DP. For i915 having this in place earlier would have saved a considerable amount of debugging that lead to the fix 2d8f6329 ("drm/i915: always update ELD connector type after get modes"). I don't see other drivers, even the ones calling drm_edid_to_eld() on DP connectors, setting the connector type in ELD. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Russell King <linux@armlinux.org.uk> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Eric Anholt <eric@anholt.net> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Acked-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d527b31619528c477c2c136f25cdf118bc0cfc1d.1509545641.git.jani.nikula@intel.comSigned-off-by:
-
Dedy Lansky authored
[ Upstream commit 0f6edfe2 ] In case count is not multiple of 4, there is a read access in wil_memcpy_toio_32() from outside src buffer boundary. In wil_memcpy_fromio_32(), in case count is not multiple of 4, there is a write access to outside dst io memory boundary. Fix these issues with proper handling of the last 1 to 4 copied bytes. Signed-off-by:
Dedy Lansky <qca_dlansky@qca.qualcomm.com> Signed-off-by:
Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by:
-
Laxman Dewangan authored
[ Upstream commit 250b76f4 ] The rate of the PWM calculated as follows: hz = NSEC_PER_SEC / period_ns; rate = (rate + (hz / 2)) / hz; This has the precision loss in lower PWM rate. Change this to have more precision as: hz = DIV_ROUND_CLOSEST_ULL(NSEC_PER_SEC * 100, period_ns); rate = DIV_ROUND_CLOSEST(rate * 100, hz) Example: 1. period_ns = 16672000, PWM clock rate is 200 KHz. Based on old formula hz = NSEC_PER_SEC / period_ns = 1000000000ul/16672000 = 59 (59.98) rate = (200K + 59/2)/59 = 3390 Based on new method: hz = 5998 rate = DIV_ROUND_CLOSE(200000*100, 5998) = 3334 If we measure the PWM signal rate, we will get more accurate period with rate value of 3334 instead of 3390. 2. period_ns = 16803898, PWM clock rate is 200 KHz. Based on old formula: hz = 59, rate = 3390 Based on new formula: hz = 5951, rate = 3360 The PWM signal rate of 3360 is more near to requested period than 3333. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit d0381c81 ] Set the pages which is used for kprobes' singlestep buffer and optprobe's trampoline instruction buffer to readonly. This can prevent unexpected (or unintended) instruction modification. This also passes rodata_test as below. Without this patch, rodata_test shows a warning: WARNING: CPU: 0 PID: 1 at arch/x86/mm/dump_pagetables.c:235 note_page+0x7a9/0xa20 x86/mm: Found insecure W+X mapping at address ffffffffa0000000/0xffffffffa0000000 With this fix, no W+X pages are found: x86/mm: Checked W+X mappings: passed, no W+X pages found. rodata_test: all tests were successful Reported-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: David S . Miller <davem@davemloft.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ye Xiaolong <xiaolong.ye@intel.com> Link: http://lkml.kernel.org/r/149076375592.22469.14174394514338612247.stgit@devboxSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
[ Upstream commit bd0b9067 ] Fix the kprobe-booster not to boost far call instruction, because a call may store the address in the single-step execution buffer to the stack, which should be modified after single stepping. Currently, this instruction will be filtered as not boostable in resume_execution(), so this is not a critical issue. Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 97d27b0d ] sg_remove_sfp_usercontext() is clearing any sg requests, but needs to take 'rq_list_lock' when modifying the list. Reported-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Tested-by:
-
Johannes Thumshirn authored
[ Upstream commit 28676d86 ] Check for a valid direction before starting the request, otherwise we risk running into an assertion in the scsi midlayer checking for valid requests. [mkp: fixed typo] Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
David Carrillo-Cisneros authored
[ Upstream commit 0973ad97 ] Session sets a number parameters that rely on evlist. These parameters are not used in pipe-mode and should not be set, since evlist is unavailable. Fix that. Signed-off-by:
David Carrillo-Cisneros <davidcc@google.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170410201432.24807-6-davidcc@google.com [ Check if file != NULL in perf_session__new(), like when used by builtin-top.c ] Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
David Carrillo-Cisneros authored
[ Upstream commit 1e0d4f02 ] __perf_session__process_pipe_events reuses the same memory buffer to process all events in the pipe. When reordering is needed (e.g. -b option), events are not immediately flushed, but kept around until reordering is possible, causing memory corruption. The problem is usually observed by a "Unknown sample error" output. It can easily be reproduced by: perf record -o - noploop | perf inject -b > output Committer testing: Before: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [8297] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] Warning: Found 1 unknown events! Is this an older tool processing a perf.data file generated by a more recent tool? If that is not the case, consider reporting to linux-kernel@vger.kernel.org. $ After: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [9027] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] no symbols found in /usr/bin/stress, maybe install a debug package? no symbols found in /usr/bin/stress, maybe install a debug package? $ Signed-off-by:
-
Mark Rutland authored
[ Upstream commit 76541370 ] In armpmu_dispatch_irq() we look at arm_pmu::plat_device to acquire platdata, so that we can defer to platform-specific IRQ handling, required on some 32-bit parts. With the advent of ACPI we won't always have a platform_device, and so we must avoid trying to dereference fields from it. This patch fixes up armpmu_dispatch_irq() to avoid doing so, introducing a new armpmu_get_platdata() helper. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Jeremy Linton <jeremy.linton@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Yuyang Du authored
[ Upstream commit 9f20dfb4 ] This fixes the commit: 1cd8fd28 ("usb: gadget: dummy_hcd: add SuperSpeed support"). In the case of ClearPortFeature and USB_PORT_FEAT_POWER, simply clear the right bit regardless of what the wValue is. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Yuyang Du <yuyang.du@intel.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
John Stultz authored
[ Upstream commit dad3f793 ] I had seen some odd behavior with HiKey's usb-gadget interface that I finally seemed to have chased down. Basically every other time I plugged in the OTG port, the gadget interface would properly initialize. The other times, I'd get a big WARN_ON in dwc2_hsotg_init_fifo() about the fifo_map not being clear. Ends up if we don't disconnect the gadget state, the fifo-map doesn't get cleared properly, which causes WARN_ON messages and also results in the device not properly being setup as a gadget every other time the OTG port is connected. So this patch adds a call to dwc2_hsotg_disconnect() in the reset path so the state is properly cleared. With it, the gadget interface initializes properly on every plug in. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by:
John Youn <johnyoun@synopsys.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
