When CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled in the kernel, -Os optimisation
flag is passed to gcc for compilation, and somehow while trying to optimize
the code, compiler is might not able to see the initialisation of variable
ne struct variable inside the get_node_info() function and results into
following warning:

fs/f2fs/node.c: In function 'get_node_info':
fs/f2fs/node.c:175:3: warning: 'ne.block_addr' may be used uninitialized in
this function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.block_addr' was declared here
fs/f2fs/node.c:176:3: warning: 'ne.ino' may be used uninitialized in this
function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.ino' was declared here
fs/f2fs/node.c:177:3: warning: 'ne.version' may be used uninitialized in
this function [-Wuninitialized]
fs/f2fs/node.c:265:24: note: 'ne.version' was declared here

Hence, lets initialise the ne struct variable to zero, which will remove
this warning and also doing this does not seems to making any impact on the
code behavior.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Pankaj Kumar <pankaj.km@samsung.com>

There exist two build failures reported by Randy Dunlap as follows.

(on i386)
 a. (config-r8857)
	ERROR: "f2fs_xattr_advise_handler" [fs/f2fs/f2fs.ko] undefined!

Key configs in (config-r8857) are as follows.
 CONFIG_F2FS_FS=m
 # CONFIG_F2FS_STAT_FS is not set
 CONFIG_F2FS_FS_XATTR=y
 # CONFIG_F2FS_FS_POSIX_ACL is not set

The error was occurred due to the function location that we made a mistake.
Recently we added a new functionality for users to indicate cold files
explicitly through xattr operations (i.e., f2fs_xattr_advise_handler).

This handler should have been added in xattr.c instead of acl.c in order
to avoid an undefined operation like in this case where XATTR is set and
ACL is not set.

 b. (config-r8855)
	fs/f2fs/file.c: In function 'f2fs_vm_page_mkwrite':
	fs/f2fs/file.c:97:2: error: implicit declaration of function
	'block_page_mkwrite_return'

Key config in (config-r8855) is CONFIG_BLOCK.

Obviously, f2fs works on top of the block device so that we should consider
carefully a sort of config dependencies.

The reason why this error was occurred was that f2fs_vm_page_mkwrite() calls
block_page_mkwrite_return() which is enalbed only if CONFIG_BLOCK is set.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>

As pointed out by Randy Dunlap, this patch removes all usage of "/**" for comment
blocks. Instead, just use "/*".
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This patch should resolve the bugs reported by the sparse tool.
Initial reports were written by "kbuild test robot" managed by fengguang.wu.

In my local machines, I've tested also by running:
> make C=2 CF="-D__CHECK_ENDIAN__"

Accordingly, I've found lots of warnings and bugs related to the endian
conversion. And I've fixed all at this moment.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

Including <linux/version.h> is not necessary.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>

I moved the f2fs-tools.git into kernel.org.
And I added a new mailing list, linux-f2fs-devel@lists.sourceforge.net.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds Makefile and Kconfig for f2fs, and updates Makefile and Kconfig files
in the fs directory.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This moves all of the f2fs debugging files into debugfs. The files are
located in /sys/kernel/debug/f2fs/

Note, I think we are generating all of the same information in each of
the files for every unique f2fs filesystem in the machine.  This copies
the functionality that was present in the proc files, but this should be
fixed up in the future.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[jaegeuk.kim@samsung.com: merged 3 debugfs entries into a *status* entry]
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds roll-forward routines to recover fsynced data.

- F2FS uses basically roll-back model with checkpointing.

- In order to implement fsync(), there are two approaches as follows.

1. A roll-back model with checkpointing at every fsync()
 : This is a naive method, but suffers from very low performance.

2. A roll-forward model
 : F2FS adopts this model where all the fsynced data should be recovered, which
   were written after checkpointing was done. In order to figure out the data,
   F2FS keeps a "fsync" mark in direct node blocks. In addition, F2FS remains
   the location of next node block in each direct node block for reconstructing
   the chain of node blocks during the recovery.

- In order to enhance the performance, F2FS keeps a "dentry" mark also in direct
  node blocks. If this is set during the recovery, F2FS replays adding a dentry.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds on-demand and background cleaning functions.

- The basic background cleaning policy is trying to do cleaning jobs as much as
  possible whenever the system is idle. Once the background cleaning is done,
  the cleaner sleeps an amount of time not to interfere with VFS calls. The time
  is dynamically adjusted according to the status of whole segments, which is
  decreased when the following conditions are satisfied.

  . GC is not conducted currently, and
  . IO subsystem is idle by checking the number of requets in bdev's request
     list, and
  . There are enough dirty segments.

  Otherwise, the time is increased incrementally until to the maximum time.
  Note that, min and max times are 10 secs and 30 secs by default.

- F2FS adopts a default victim selection policy where background cleaning uses
  a cost-benefit algorithm, while on-demand cleaning uses a greedy algorithm.

- The method of moving data during the cleaning is slightly different between
  background and on-demand cleaning schemes. In the case of background cleaning,
  F2FS loads the data, and marks them as dirty. Then, F2FS expects that the data
  will be moved by flusher or VM. In the case of on-demand cleaning, F2FS should
  move the data right away.

- In order to identify valid blocks in a victim segment, F2FS scans the bitmap
  of the segment managed as an SIT entry.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This implements xattr and acl functionalities.

- F2FS uses a node page to contain use extended attributes.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

this adds core functions to find, add, delete, and link dentries.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds inode operations for directory, symlink, and special inodes.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds core functions to get, read, write, and evict an inode.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds address space operations for data.

- F2FS supports readpages(), writepages(), and direct_IO().

- Because of out-of-place writes, f2fs_direct_IO() does not write data in place.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds memory operations and file/file_inode operations.

- F2FS supports fallocate(), mmap(), fsync(), and basic ioctl().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds specific functions not only to manage dirty/free segments, SIT pages,
a cache for SIT entries, and summary entries, but also to allocate free blocks
and write three types of pages: data, node, and meta.

- F2FS maintains three types of bitmaps in memory, which indicate free, prefree,
  and dirty segments respectively.

- The key information of an SIT entry consists of a segment number, the number
  of valid blocks in the segment, a bitmap to identify there-in valid or invalid
  blocks.

- An SIT page is composed of a certain range of SIT entries, which is maintained
  by the address space of meta_inode.

- To cache SIT entries, a simple array is used. The index for the array is the
  segment number.

- A summary entry for data contains the parent node information. A summary entry
  for node contains its node offset from the inode.

- F2FS manages information about six active logs and those summary entries in
  memory. Whenever one of them is changed, its summary entries are flushed to
  its SIT page maintained by the address space of meta_inode.

- This patch adds a default block allocation function which supports heap-based
  allocation policy.

- This patch adds core functions to write data, node, and meta pages. Since LFS
  basically produces a series of sequential writes, F2FS merges sequential bios
  with a single one as much as possible to reduce the IO scheduling overhead.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds specific functions to manage NAT pages, a cache for NAT entries, free
nids, direct/indirect node blocks for indexing data, and address space for node
pages.

- The key information of an NAT entry consists of a node id and a block address.

- An NAT page is composed of block addresses covered by a certain range of NAT
  entries, which is maintained by the address space of meta_inode.

- A radix tree structure is used to cache NAT entries. The index for the tree
  is a node id.

- When there is no free nid, F2FS should scan NAT entries to find new one. In
  order to avoid scanning frequently, F2FS manages a list containing a number of
  free nids in memory. Only when free nids in the list are exhausted, scanning
  process, build_free_nids(), is triggered.

- F2FS has direct and indirect node blocks for indexing data. This patch adds
  fuctions related to the node block management such as getting, allocating, and
  truncating node blocks to index data.

- In order to cache node blocks in memory, F2FS has a node_inode with an address
  space for node pages. This patch also adds the address space operations for
  node_inode.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds functions required by the checkpoint operations.

Basically, f2fs adopts a roll-back model with checkpoint blocks written in the
CP area. The checkpoint procedure includes as follows.

- write_checkpoint()
1. block_operations() freezes VFS calls.
2. submit cached bios.
3. flush_nat_entries() writes NAT pages updated by dirty NAT entries.
4. flush_sit_entries() writes SIT pages updated by dirty SIT entries.
5. do_checkpoint() writes,
  - checkpoint block (#0)
  - orphan inode blocks
  - summary blocks made by active logs
  - checkpoint block (copy of #0)
6. unblock_opeations()

In order to provide an address space for meta pages, f2fs_sb_info has a special
inode, namely meta_inode. This patch also adds the address space operations for
meta_inode.
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds the implementation of superblock operations for f2fs, which includes
- init_f2fs_fs/exit_f2fs_fs
- f2fs_mount
- super_operations of f2fs
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds the following major in-memory structures in f2fs.

- f2fs_sb_info:
  contains f2fs-specific information, two special inode pointers for node and
  meta address spaces, and orphan inode management.

- f2fs_inode_info:
  contains vfs_inode and other fs-specific information.

- f2fs_nm_info:
  contains node manager information such as NAT entry cache, free nid list,
  and NAT page management.

- f2fs_node_info:
  represents a node as node id, inode number, block address, and its version.

- f2fs_sm_info:
  contains segment manager information such as SIT entry cache, free segment
  map, current active logs, dirty segment management, and segment utilization.
  The specific structures are sit_info, free_segmap_info, dirty_seglist_info,
  curseg_info.

In addition, add F2FS_SUPER_MAGIC in magic.h.
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds a header file describing the on-disk layout of f2fs.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Chul Lee <chur.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

This adds a document describing the mount options, proc entries, usage, and
design of Flash-Friendly File System, namely F2FS.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>

The matrix-keymap module is currently lacking a proper module license,
add one so we don't have this module tainting the entire kernel.  This
issue has been present since commit 1932811f ("Input: matrix-keymap
- uninline and prepare for device tree support")
Signed-off-by: Florian Fainelli <florian@openwrt.org>
CC: stable@vger.kernel.org # v3.5+
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Netlink socket dumping had several missing verifications and checks.

    In particular, address comparisons in the request byte code
    interpreter could access past the end of the address in the
    inet_request_sock.

    Also, address family and address prefix lengths were not validated
    properly at all.

    This means arbitrary applications can read past the end of certain
    kernel data structures.

    Fixes from Neal Cardwell.

 2) ip_check_defrag() operates in contexts where we're in the process
    of, or about to, input the packet into the real protocols
    (specifically macvlan and AF_PACKET snooping).

    Unfortunately, it does a pskb_may_pull() which can modify the
    backing packet data which is not legal if the SKB is shared.  It
    very much can be shared in this context.

    Deal with the possibility that the SKB is segmented by using
    skb_copy_bits().

    Fix from Johannes Berg based upon a report by Eric Leblond.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  ipv4: ip_check_defrag must not modify skb before unsharing
  inet_diag: validate port comparison byte code to prevent unsafe reads
  inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run()
  inet_diag: validate byte code to prevent oops in inet_diag_bc_run()
  inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state

This reverts commits a5091539 and
d7c3b937.

This is a revert of a revert of a revert.  In addition, it reverts the
even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the
original commits in linux-next.

It turns out that the original patch really was bogus, and that the
original revert was the correct thing to do after all.  We thought we
had fixed the problem, and then reverted the revert, but the problem
really is fundamental: waking up kswapd simply isn't the right thing to
do, and direct reclaim sometimes simply _is_ the right thing to do.

When certain allocations fail, we simply should try some direct reclaim,
and if that fails, fail the allocation.  That's the right thing to do
for THP allocations, which can easily fail, and the GPU allocations want
to do that too.

So starting kswapd is sometimes simply wrong, and removing the flag that
said "don't start kswapd" was a mistake.  Let's hope we never revisit
this mistake again - and certainly not this many times ;)
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ip_check_defrag() might be called from af_packet within the
RX path where shared SKBs are used, so it must not modify
the input SKB before it has unshared it for defragmentation.
Use skb_copy_bits() to get the IP header and only pull in
everything later.

The same is true for the other caller in macvlan as it is
called from dev->rx_handler which can also get a shared SKB.
Reported-by: Eric Leblond <eric@regit.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 782fd304.

We are going to reinstate the __GFP_NO_KSWAPD flag that has been
removed, the removal reverted, and then removed again.  Making this
commit a pointless fixup for a problem that was caused by the removal of
__GFP_NO_KSWAPD flag.

The thing is, we really don't want to wake up kswapd for THP allocations
(because they fail quite commonly under any kind of memory pressure,
including when there is tons of memory free), and these patches were
just trying to fix up the underlying bug: the original removal of
__GFP_NO_KSWAPD in commit c6543459 ("mm: remove __GFP_NO_KSWAPD")
was simply bogus.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add logic to verify that a port comparison byte code operation
actually has the second inet_diag_bc_op from which we read the port
for such operations.

Previously the code blindly referenced op[1] without first checking
whether a second inet_diag_bc_op struct could fit there. So a
malicious user could make the kernel read 4 bytes beyond the end of
the bytecode array by claiming to have a whole port comparison byte
code (2 inet_diag_bc_op structs) when in fact the bytecode was not
long enough to hold both.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add logic to check the address family of the user-supplied conditional
and the address family of the connection entry. We now do not do
prefix matching of addresses from different address families (AF_INET
vs AF_INET6), except for the previously existing support for having an
IPv4 prefix match an IPv4-mapped IPv6 address (which this commit
maintains as-is).

This change is needed for two reasons:

(1) The addresses are different lengths, so comparing a 128-bit IPv6
prefix match condition to a 32-bit IPv4 connection address can cause
us to unwittingly walk off the end of the IPv4 address and read
garbage or oops.

(2) The IPv4 and IPv6 address spaces are semantically distinct, so a
simple bit-wise comparison of the prefixes is not meaningful, and
would lead to bogus results (except for the IPv4-mapped IPv6 case,
which this commit maintains).
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND
operations.

Previously we did not validate the inet_diag_hostcond, address family,
address length, and prefix length. So a malicious user could make the
kernel read beyond the end of the bytecode array by claiming to have a
whole inet_diag_hostcond when the bytecode was not long enough to
contain a whole inet_diag_hostcond of the given address family. Or
they could make the kernel read up to about 27 bytes beyond the end of
a connection address by passing a prefix length that exceeded the
length of addresses of the given family.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix inet_diag to be aware of the fact that AF_INET6 TCP connections
instantiated for IPv4 traffic and in the SYN-RECV state were actually
created with inet_reqsk_alloc(), instead of inet6_reqsk_alloc(). This
means that for such connections inet6_rsk(req) returns a pointer to a
random spot in memory up to roughly 64KB beyond the end of the
request_sock.

With this bug, for a server using AF_INET6 TCP sockets and serving
IPv4 traffic, an inet_diag user like `ss state SYN-RECV` would lead to
inet_diag_fill_req() causing an oops or the export to user space of 16
bytes of kernel memory as a garbage IPv6 address, depending on where
the garbage inet6_rsk(req) pointed.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit c702418f ("mm: vmscan: do not keep kswapd looping forever due
to individual uncompactable zones") removed zone watermark checks from
the compaction code in kswapd but left in the zone congestion clearing,
which now happens unconditionally on higher order reclaim.

This messes up the reclaim throttling logic for zones with
dirty/writeback pages, where zones should only lose their congestion
status when their watermarks have been restored.

Remove the clearing from the zone compaction section entirely.  The
preliminary zone check and the reclaim loop in kswapd will clear it if
the zone is considered balanced.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The direct-IO write path already had the i_size checks in mm/filemap.c,
but it turns out the read path did not, and removing the block size
checks in fs/block_dev.c (commit bbec0270: "blkdev_max_block: make
private to fs/buffer.c") removed the magic "shrink IO to past the end of
the device" code there.

Fix it by truncating the IO to the size of the block device, like the
write path already does.

NOTE! I suspect the write path would be *much* better off doing it this
way in fs/block_dev.c, rather than hidden deep in mm/filemap.c.  The
mm/filemap.c code is extremely hard to follow, and has various
conditionals on the target being a block device (ie the flag passed in
to 'generic_write_checks()', along with a conditional update of the
inode timestamp etc).

It is also quite possible that we should treat this whole block device
size as a "s_maxbytes" issue, and try to make the logic even more
generic.  However, in the meantime this is the fairly minimal targeted
fix.

Noted by Milan Broz thanks to a regression test for the cryptsetup
reencrypt tool.
Reported-and-tested-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:
 "Two stragglers:

   1) The new code that adds new flushing semantics to GRO can cause SKB
      pointer list corruption, manage the lists differently to avoid the
      OOPS.  Fix from Eric Dumazet.

   2) When TCP fast open does a retransmit of data in a SYN-ACK or
      similar, we update retransmit state that we shouldn't triggering a
      WARN_ON later.  Fix from Yuchung Cheng."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: gro: fix possible panic in skb_gro_receive()
  tcp: bug fix Fast Open client retransmission

commit 2e71a6f8 (net: gro: selective flush of packets) added
a bug for skbs using frag_list. This part of the GRO stack is rarely
used, as it needs skb not using a page fragment for their skb->head.

Most drivers do use a page fragment, but some of them use GFP_KERNEL
allocations for the initial fill of their RX ring buffer.

napi_gro_flush() overwrite skb->prev that was used for these skb to
point to the last skb in frag_list.

Fix this using a separate field in struct napi_gro_cb to point to the
last fragment.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If SYN-ACK partially acks SYN-data, the client retransmits the
remaining data by tcp_retransmit_skb(). This increments lost recovery
state variables like tp->retrans_out in Open state. If loss recovery
happens before the retransmission is acked, it triggers the WARN_ON
check in tcp_fastretrans_alert(). For example: the client sends
SYN-data, gets SYN-ACK acking only ISN, retransmits data, sends
another 4 data packets and get 3 dupacks.

Since the retransmission is not caused by network drop it should not
update the recovery state variables. Further the server may return a
smaller MSS than the cached MSS used for SYN-data, so the retranmission
needs a loop. Otherwise some data will not be retransmitted until timeout
or other loss recovery events.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Chris Ball:
 "Two small regression fixes:

   - sdhci-s3c: Fix runtime PM regression against 3.7-rc1
   - sh-mmcif: Fix oops against 3.6"

* tag 'mmc-fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: sh-mmcif: avoid oops on spurious interrupts (second try)
  Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts"
  mmc: sdhci-s3c: fix missing clock for gpio card-detect

This fixes a regression in 3.7-rc, which has since gone into stable.

Commit 00442ad0 ("mempolicy: fix a memory corruption by refcount
imbalance in alloc_pages_vma()") changed get_vma_policy() to raise the
refcount on a shmem shared mempolicy; whereas shmem_alloc_page() went
on expecting alloc_page_vma() to drop the refcount it had acquired.
This deserves a rework: but for now fix the leak in shmem_alloc_page().

Hugh: shmem_swapin() did not need a fix, but surely it's clearer to use
the same refcounting there as in shmem_alloc_page(), delete its onstack
mempolicy, and the strange mpol_cond_copy() and __mpol_cond_copy() -
those were invented to let swapin_readahead() make an unknown number of
calls to alloc_pages_vma() with one mempolicy; but since 00442ad0,
alloc_pages_vma() has kept refcount in balance, so now no problem.
Reported-and-tested-by: Tommi Rantala <tt.rantala@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>