- 29 Jun, 2021 40 commits
-
-
Matthew Wilcox (Oracle) authored
Move the PagePoisoned test into dump_page(). Skip the hex print for poisoned pages -- we know they're full of ffffffff. Move the reason printing from __dump_page() to dump_page(). Link: https://lkml.kernel.org/r/20210416231531.2521383-3-willy@infradead.orgSigned-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by:
William Kucharski <william.kucharski@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Aaron Tomlin authored
A customer experienced a low-memory situation and decided to issue a SIGKILL (i.e. a fatal signal). Instead of promptly terminating as one would expect, the aforementioned task remained unresponsive. Further investigation indicated that the task was "stuck" in the reclaim/compaction retry loop. Now, it does not make sense to retry compaction when a fatal signal is pending. In the context of try_to_compact_pages(), indeed COMPACT_SKIPPED can be returned; albeit, not every zone, on the zone list, would be considered in the case a fatal signal is found to be pending. Yet, in should_compact_retry(), given the last known compaction result, each zone, on the zone list, can be considered/or checked (see compaction_zonelist_suitable()). For example, if a zone was found to succeed, then reclaim/compaction would be tried again (notwithstanding the above). This patch ensures that compaction is not needlessly retried irrespective of the last known compaction result e.g. if it was skipped, in the unlikely case a fatal signal is found pending. So, OOM is at least attempted. Link: https://lkml.kernel.org/r/20210520142901.3371299-1-atomlin@redhat.comSigned-off-by:
Aaron Tomlin <atomlin@redhat.com> Reviewed-by:
-
Matthew Wilcox (Oracle) authored
Patch series "Constify struct page arguments". While working on various solutions to the 32-bit struct page size regression, one of the problems I found was the networking stack expects to be able to pass const struct page pointers around, and the mm doesn't provide a lot of const-friendly functions to call. The root tangle of problems is that a lot of functions call VM_BUG_ON_PAGE(), which calls dump_page(), which calls a lot of functions which don't take a const struct page (but could be const). This patch (of 6): The only caller of __dump_page() now opencodes dump_page(), so remove it as an externally visible symbol. Link: https://lkml.kernel.org/r/20210416231531.2521383-1-willy@infradead.org Link: https://lkml.kernel.org/r/20210416231531.2521383-2-willy@infradead.orgSigned-off-by:
-
Mike Rapoport authored
There is a lot of historical ifdefery in is_highmem_idx() and its helper zone_movable_is_highmem() that was required because of two different paths for nodes and zones initialization that were selected at compile time. Until commit 3f08a302 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option") the movable_zone variable was only available for configurations that had CONFIG_HAVE_MEMBLOCK_NODE_MAP enabled so the test in zone_movable_is_highmem() used that variable only for such configurations. For other configurations the test checked if the index of ZONE_MOVABLE was greater by 1 than the index of ZONE_HIGMEM and then movable zone was considered a highmem zone. Needless to say, ZONE_MOVABLE - 1 equals ZONE_HIGHMEM by definition when CONFIG_HIGHMEM=y. Commit 3f08a302 ("mm: remove CONFIG_HAVE_MEMBLOCK_NODE_MAP option") made movable_zone variable always available. Since this variable is set to ZONE_HIGHMEM if CONFIG_HIGHMEM is enabled and highmem zone is populated, it is enough to check whether zone_idx == ZONE_MOVABLE && movable_zone == ZONE_HIGMEM to test if zone index points to a highmem zone. Remove zone_movable_is_highmem() that is not used anywhere except is_highmem_idx() and use the test above in is_highmem_idx() instead. Link: https://lkml.kernel.org/r/20210426141927.1314326-3-rppt@kernel.orgSigned-off-by:
Mike Rapoport <rppt@linux.ibm.com> Reviewed-by:
-
Jungseung Lee authored
Add the details for figuring out which parts of the kernel image is being freed on initmem case. Before: Freeing unused kernel memory: 1024K After: Freeing unused kernel image (initmem) memory: 1024K Link: https://lkml.kernel.org/r/1622706274-4533-1-git-send-email-js07.lee@samsung.comSigned-off-by:
Jungseung Lee <js07.lee@samsung.com> Reviewed-by:
-
Kuan-Ying Lee authored
Add memory corruption identification support for hardware tag-based mode. We store one old free pointer tag and free backtrace instead of five because hardware tag-based kasan only has 16 different tags. If we store as many stacks as SW tag-based kasan does(5 stacks), there is high probability to find the same tag in the stacks when out-of-bound issues happened and we will mistake out-of-bound issue for use-after-free. Link: https://lkml.kernel.org/r/20210626100931.22794-4-Kuan-Ying.Lee@mediatek.comSigned-off-by:
Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Suggested-by:
Marco Elver <elver@google.com> Reviewed-by:
Alexander Potapenko <glider@google.com> Reviewed-by:
Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by:
-
Kuan-Ying Lee authored
1. Move kasan_get_free_track() and kasan_set_free_info() into tags.c and combine these two functions for SW_TAGS and HW_TAGS kasan mode. 2. Move kasan_get_bug_type() to report_tags.c and make this function compatible for SW_TAGS and HW_TAGS kasan mode. Link: https://lkml.kernel.org/r/20210626100931.22794-3-Kuan-Ying.Lee@mediatek.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
Kuan-Ying Lee authored
Patch series "kasan: add memory corruption identification support for hw tag-based kasan", v4. Add memory corruption identification for hardware tag-based KASAN mode. This patch (of 3): Rename CONFIG_KASAN_SW_TAGS_IDENTIFY to CONFIG_KASAN_TAGS_IDENTIFY in order to be compatible with hardware tag-based mode. Link: https://lkml.kernel.org/r/20210626100931.22794-1-Kuan-Ying.Lee@mediatek.com Link: https://lkml.kernel.org/r/20210626100931.22794-2-Kuan-Ying.Lee@mediatek.comSigned-off-by:
-
Daniel Axtens authored
powerpc has a variable number of PTRS_PER_*, set at runtime based on the MMU that the kernel is booted under. This means the PTRS_PER_* are no longer constants, and therefore breaks the build. Switch to using MAX_PTRS_PER_*, which are constant. Link: https://lkml.kernel.org/r/20210624034050.511391-5-dja@axtens.netSigned-off-by:
Daniel Axtens <dja@axtens.net> Suggested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Suggested-by:
Balbir Singh <bsingharora@gmail.com> Reviewed-by:
-
Daniel Axtens authored
Commit c65e774f ("x86/mm: Make PGDIR_SHIFT and PTRS_PER_P4D variable") made PTRS_PER_P4D variable on x86 and introduced MAX_PTRS_PER_P4D as a constant for cases which need a compile-time constant (e.g. fixed-size arrays). powerpc likewise has boot-time selectable MMU features which can cause other mm "constants" to vary. For KASAN, we have some static PTE/PMD/PUD/P4D arrays so we need compile-time maximums for all these constants. Extend the MAX_PTRS_PER_ idiom, and place default definitions in include/pgtable.h. These define MAX_PTRS_PER_x to be PTRS_PER_x unless an architecture has defined MAX_PTRS_PER_x in its arch headers. Clean up pgtable-nop4d.h and s390's MAX_PTRS_PER_P4D definitions while we're at it: both can just pick up the default now. Link: https://lkml.kernel.org/r/20210624034050.511391-4-dja@axtens.netSigned-off-by:
-
Daniel Axtens authored
Allow architectures to define a kasan_arch_is_ready() hook that bails out of any function that's about to touch the shadow unless the arch says that it is ready for the memory to be accessed. This is fairly uninvasive and should have a negligible performance penalty. This will only work in outline mode, so an arch must specify ARCH_DISABLE_KASAN_INLINE if it requires this. Link: https://lkml.kernel.org/r/20210624034050.511391-3-dja@axtens.netSigned-off-by:
-
Daniel Axtens authored
Patch series "KASAN core changes for ppc64 radix KASAN", v16. Building on the work of Christophe, Aneesh and Balbir, I've ported KASAN to 64-bit Book3S kernels running on the Radix MMU. I've been trying this for a while, but we keep having collisions between the kasan code in the mm tree and the code I want to put in to the ppc tree. This series just contains the kasan core changes that we need. There should be no noticeable changes to other platforms. This patch (of 4): For annoying architectural reasons, it's very difficult to support inline instrumentation on powerpc64.* Add a Kconfig flag to allow an arch to disable inline. (It's a bit annoying to be 'backwards', but I'm not aware of any way to have an arch force a symbol to be 'n', rather than 'y'.) We also disable stack instrumentation in this case as it does things that are functionally equivalent to inline instrumentation, namely adding code that touches the shadow directly without going through a C helper. * on ppc64 atm, the shadow lives in virtual memory and isn't accessible in real mode. However, before we turn on virtual memory, we parse the device tree to determine which platform and MMU we're running under. That calls generic DT code, which is instrumented. Inline instrumentation in DT would unconditionally attempt to touch the shadow region, which we won't have set up yet, and would crash. We can make outline mode wait for the arch to be ready, but we can't change what the compiler inserts for inline mode. Link: https://lkml.kernel.org/r/20210624034050.511391-1-dja@axtens.net Link: https://lkml.kernel.org/r/20210624034050.511391-2-dja@axtens.netSigned-off-by:
-
David Gow authored
The KUNIT_EXPECT_KASAN_FAIL() macro currently uses KUNIT_EXPECT_EQ() to compare fail_data.report_expected and fail_data.report_found. This always gave a somewhat useless error message on failure, but the addition of extra compile-time checking with READ_ONCE() has caused it to get much longer, and be truncated before anything useful is displayed. Instead, just check fail_data.report_found by hand (we've just set report_expected to 'true'), and print a better failure message with KUNIT_FAIL(). Because of this, report_expected is no longer used anywhere, and can be removed. Beforehand, a failure in: KUNIT_EXPECT_KASAN_FAIL(test, ((volatile char *)area)[3100]); would have looked like: [22:00:34] [FAILED] vmalloc_oob [22:00:34] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:991 [22:00:34] Expected ({ do { extern void __compiletime_assert_705(void) __attribute__((__error__("Unsupported access size for {READ,WRITE}_ONCE()."))); if (!((sizeof(fail_data.report_expected) == sizeof(char) || sizeof(fail_data.repp [22:00:34] not ok 45 - vmalloc_oob With this change, it instead looks like: [22:04:04] [FAILED] vmalloc_oob [22:04:04] # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:993 [22:04:04] KASAN failure expected in "((volatile char *)area)[3100]", but none occurred [22:04:04] not ok 45 - vmalloc_oob Also update the example failure in the documentation to reflect this. Link: https://lkml.kernel.org/r/20210606005531.165954-1-davidgow@google.comSigned-off-by:David Gow <davidgow@google.com> Reviewed-by:
Brendan Higgins <brendanhiggins@google.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Daniel Axtens <dja@axtens.net> Cc: David Gow <davidgow@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Alexander Potapenko authored
Most of the contents of KASAN reports are printed with pr_err(), so use a consistent logging level to print the memory access stacks. Link: https://lkml.kernel.org/r/20210506105405.3535023-2-glider@google.comSigned-off-by:
-
Alexander Potapenko authored
dump_stack() is used for many different cases, which may require a log level consistent with other kernel messages surrounding the dump_stack() call. Without that, certain systems that are configured to ignore the default level messages will miss stack traces in critical error reports. This patch introduces dump_stack_lvl() that behaves similarly to dump_stack(), but accepts a custom log level. The old dump_stack() becomes equal to dump_stack_lvl(KERN_DEFAULT). A somewhat similar patch has been proposed in 2012: https://lore.kernel.org/lkml/1332493269.2359.9.camel@hebo/ , but wasn't merged. [elver@google.com: add missing dump_stack_lvl() stub if CONFIG_PRINTK=n] Link: https://lkml.kernel.org/r/YJ0KAM0hQev1AmWe@elver.google.com Link: https://lkml.kernel.org/r/20210506105405.3535023-1-glider@google.comSigned-off-by:
-
Rafael Aquini authored
On non-preemptible kernel builds the watchdog can complain about soft lockups when vfree() is called against large vmalloc areas: [ 210.851798] kvmalloc-test: vmalloc(2199023255552) succeeded [ 238.654842] watchdog: BUG: soft lockup - CPU#181 stuck for 26s! [rmmod:5203] [ 238.662716] Modules linked in: kvmalloc_test(OE-) ... [ 238.772671] CPU: 181 PID: 5203 Comm: rmmod Tainted: G S OE 5.13.0-rc7+ #1 [ 238.781413] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0553.D01.1809190614 09/19/2018 [ 238.792383] RIP: 0010:free_unref_page+0x52/0x60 [ 238.797447] Code: 48 c1 fd 06 48 89 ee e8 9c d0 ff ff 84 c0 74 19 9c 41 5c fa 48 89 ee 48 89 df e8 b9 ea ff ff 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f0 29 77 [ 238.818406] RSP: 0018:ffffb4d87868fe98 EFLAGS: 00000206 [ 238.824236] RAX: 0000000000000000 RBX: 000000001da0c945 RCX: ffffb4d87868fe40 [ 238.832200] RDX: ffffd79d3beed108 RSI: ffffd7998501dc08 RDI: ffff9c6fbffd7010 [ 238.840166] RBP: 000000000d518cbd R08: ffffd7998501dc08 R09: 0000000000000001 [ 238.848131] R10: 0000000000000000 R11: ffffd79d3beee088 R12: 0000000000000202 [ 238.856095] R13: ffff9e5be3eceec0 R14: 0000000000000000 R15: 0000000000000000 [ 238.864059] FS: 00007fe082c2d740(0000) GS:ffff9f4c69b40000(0000) knlGS:0000000000000000 [ 238.873089] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 238.879503] CR2: 000055a000611128 CR3: 000000f6094f6006 CR4: 00000000007706e0 [ 238.887467] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 238.895433] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 238.903397] PKRU: 55555554 [ 238.906417] Call Trace: [ 238.909149] __vunmap+0x17c/0x220 [ 238.912851] __x64_sys_delete_module+0x13a/0x250 [ 238.918008] ? syscall_trace_enter.isra.20+0x13c/0x1b0 [ 238.923746] do_syscall_64+0x39/0x80 [ 238.927740] entry_SYSCALL_64_after_hwframe+0x44/0xae Like in other range zapping routines that iterate over a large list, lets just add cond_resched() within __vunmap()'s page-releasing loop in order to avoid the watchdog splats. Link: https://lkml.kernel.org/r/20210622225030.478384-1-aquini@redhat.comSigned-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Uladzislau Rezki authored
Currently for order-0 pages we use a bulk-page allocator to get set of pages. From the other hand not allocating all pages is something that might occur. In that case we should fallbak to the single-page allocator trying to get missing pages, because it is more permissive(direct reclaim, etc). Introduce a vm_area_alloc_pages() function where the described logic is implemented. Link: https://lkml.kernel.org/r/20210521130718.GA17882@pc638.lanSigned-off-by:
Christoph Hellwig <hch@lst.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Hillf Danton <hdanton@sina.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Uladzislau Rezki (Sony) authored
A checkpatch.pl script complains on splitting a text across lines. It is because if a user wants to find an entire string he or she will not succeeded. <snip> WARNING: quoted string split across lines + "vmalloc size %lu allocation failure: " + "page order %u allocation failed", total: 0 errors, 1 warnings, 10 lines checked <snip> Link: https://lkml.kernel.org/r/20210521204359.19943-1-urezki@gmail.comSigned-off-by:
-
Uladzislau Rezki (Sony) authored
When a memory allocation for array of pages are not succeed emit a warning message as a first step and then perform the further cleanup. The reason it should be done in a right order is the clean up function which is free_vm_area() can potentially also follow its error paths what can lead to confusion what was broken first. Link: https://lkml.kernel.org/r/20210516202056.2120-4-urezki@gmail.comSigned-off-by:
-
Uladzislau Rezki (Sony) authored
Recently there has been introduced a page bulk allocator for users which need to get number of pages per one call request. For order-0 pages switch to an alloc_pages_bulk_array_node() instead of alloc_pages_node(), the reason is the former is not capable of allocating set of pages, thus a one call is per one page. Second, according to my tests the bulk allocator uses less cycles even for scenarios when only one page is requested. Running the "perf" on same test case shows below difference: <default> - 45.18% __vmalloc_node - __vmalloc_node_range - 35.60% __alloc_pages - get_page_from_freelist 3.36% __list_del_entry_valid 3.00% check_preemption_disabled 1.42% prep_new_page <default> <patch> - 31.00% __vmalloc_node - __vmalloc_node_range - 14.48% __alloc_pages_bulk 3.22% __list_del_entry_valid - 0.83% __alloc_pages get_page_from_freelist <patch> The "test_vmalloc.sh" also shows performance improvements: fix_size_alloc_test_4MB loops: 1000000 avg: 89105095 usec fix_size_alloc_test loops: 1000000 avg: 513672 usec full_fit_alloc_test loops: 1000000 avg: 748900 usec long_busy_list_alloc_test loops: 1000000 avg: 8043038 usec random_size_alloc_test loops: 1000000 avg: 4028582 usec fix_align_alloc_test loops: 1000000 avg: 1457671 usec fix_size_alloc_test_4MB loops: 1000000 avg: 62083711 usec fix_size_alloc_test loops: 1000000 avg: 449207 usec full_fit_alloc_test loops: 1000000 avg: 735985 usec long_busy_list_alloc_test loops: 1000000 avg: 5176052 usec random_size_alloc_test loops: 1000000 avg: 2589252 usec fix_align_alloc_test loops: 1000000 avg: 1365009 usec For example 4MB allocations illustrates ~30% gain, all the rest is also better. Link: https://lkml.kernel.org/r/20210516202056.2120-3-urezki@gmail.comSigned-off-by:Mel Gorman <mgorman@suse.de> Cc: Hillf Danton <hdanton@sina.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Uladzislau Rezki (Sony) authored
Patch series "vmalloc() vs bulk allocator", v2. This patch (of 3): Add a "node" variant of the alloc_pages_bulk_array() function. The helper guarantees that a __alloc_pages_bulk() is invoked with a valid NUMA node ID. Link: https://lkml.kernel.org/r/20210516202056.2120-1-urezki@gmail.com Link: https://lkml.kernel.org/r/20210516202056.2120-2-urezki@gmail.comSigned-off-by:
-
Vincent Whitchurch authored
Some trace event formats print PFNs as hex while others print them as decimal. This is rather annoying when attempting to grep through traces to understand what's going on with a particular page. $ git grep -ho 'pfn=[0x%lu]\+' include/trace/events/ | sort | uniq -c 11 pfn=0x%lx 12 pfn=%lu 2 pfn=%lx Printing as hex is in the majority in the trace events, and all the normal printks in mm/ also print PFNs as hex, so change all the PFN formats in the trace events to use 0x%lx. Link: https://lkml.kernel.org/r/20210602092608.1493-1-vincent.whitchurch@axis.comSigned-off-by:Vincent Whitchurch <vincent.whitchurch@axis.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jesper Dangaard Brouer <hawk@kernel.org> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by:
-
YueHaibing authored
Use DEVICE_ATTR_RO() helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lkml.kernel.org/r/20210524112852.34716-1-yuehaibing@huawei.comSigned-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Souptick Joarder authored
Kernel test robot throws below warning -> >> arch/h8300/kernel/setup.c:72:26: warning: Unused variable: region [unusedVariable] struct memblock_region *region; Fixed it by removing unused variable. Link: https://lkml.kernel.org/r/20210602185431.11416-1-jrdr.linux@gmail.comSigned-off-by:Souptick Joarder <jrdr.linux@gmail.com> Reported-by:
kernel test robot <lkp@intel.com> Acked-by:
Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
Chen Li authored
1. These tlb flush functions have been using vma instead mm long time ago, but there is still some comments use mm as parameter. 2. the actual struct we use is vm_area_struct instead of vma_struct. 3. remove unused flush_kern_tlb_page. Link: https://lkml.kernel.org/r/87k0oaq311.wl-chenli@uniontech.comSigned-off-by:
Chen Li <chenli@uniontech.com> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Jonas Bonn <jonas@southpole.se> Cc: Chris Zankel <chris@zankel.net> Signed-off-by:
-
Liam Howlett authored
vma_lookup() finds the vma of a specific address with a cleaner interface and is more readable. Link: https://lkml.kernel.org/r/20210521174745.2219620-23-Liam.Howlett@Oracle.comSigned-off-by:
Liam R. Howlett <Liam.Howlett@Oracle.com> Reviewed-by:
Laurent Dufour <ldufour@linux.ibm.com> Acked-by:
David Hildenbrand <david@redhat.com> Acked-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-22-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-21-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-20-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-19-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-18-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-17-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-16-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
vma_lookup() finds the vma of a specific address with a cleaner interface and is more readable. Link: https://lkml.kernel.org/r/20210521174745.2219620-15-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-14-Liam.Howlett@Oracle.comSigned-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-13-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
vma_lookup() finds the vma of a specific address with a cleaner interface and is more readable. Link: https://lkml.kernel.org/r/20210521174745.2219620-12-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
vma_lookup() finds the vma of a specific address with a cleaner interface and is more readable. Link: https://lkml.kernel.org/r/20210521174745.2219620-11-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-10-Liam.Howlett@Oracle.comSigned-off-by:
-
Liam Howlett authored
Use vma_lookup() to find the VMA at a specific address. As vma_lookup() will return NULL if the address is not within any VMA, the start address no longer needs to be validated. Link: https://lkml.kernel.org/r/20210521174745.2219620-9-Liam.Howlett@Oracle.comSigned-off-by:
-
