- 06 Aug, 2018 39 commits
-
-
Sven Eckelmann authored
[ Upstream commit 9ba8df0c ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Eckelmann authored
[ Upstream commit 45faf6e0 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 01fb2994 ] The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with: Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: FCC Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 6f5cdfa8 ] Manipulating the enable_cnt behind the back of the driver will wreak complete havoc with the kernel state, so disallow it. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit ff3d27a0 ] Under the following case, qgroup rescan can double account cowed tree blocks: In this case, extent tree only has one tree block. - | transid=5 last committed=4 | btrfs_qgroup_rescan_worker() | |- btrfs_start_transaction() | | transid = 5 | |- qgroup_rescan_leaf() | |- btrfs_search_slot_for_read() on extent tree | Get the only extent tree block from commit root (transid = 4). | Scan it, set qgroup_rescan_progress to the last | EXTENT/META_ITEM + 1 | now qgroup_rescan_progress = A + 1. | | fs tree get CoWed, new tree block is at A + 16K | transid 5 get committed - | transid=6 last committed=5 | btrfs_qgroup_rescan_worker() | btrfs_qgroup_rescan_worker() | |- btrfs_start_transaction() | | transid = 5 | |- qgroup_rescan_leaf() | |- btrfs_search_slot_for_read() on extent tree | Get the only extent tree block from commit root (transid = 5). | scan it using qgroup_rescan_progress (A + 1). | found new tree block beyong A, and it's fs tree block, | account it to increase qgroup numbers. - In above case, tree block A, and tree block A + 16K get accounted twice, while qgroup rescan should stop when it already reach the last leaf, other than continue using its qgroup_rescan_progress. Such case could happen by just looping btrfs/017 and with some possibility it can hit such double qgroup accounting problem. Fix it by checking the path to determine if we should finish qgroup rescan, other than relying on next loop to exit. Reported-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Qu Wenruo <wqu@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
David Sterba authored
[ Upstream commit 3d3a2e61 ] Currently the code assumes that there's an implied barrier by the sequence of code preceding the wakeup, namely the mutex unlock. As Nikolay pointed out: I think this is wrong (not your code) but the original assumption that the RELEASE semantics provided by mutex_unlock is sufficient. According to memory-barriers.txt: Section 'LOCK ACQUISITION FUNCTIONS' states: (2) RELEASE operation implication: Memory operations issued before the RELEASE will be completed before the RELEASE operation has completed. Memory operations issued after the RELEASE *may* be completed before the RELEASE operation has completed. (I've bolded the may portion) The example given there: As an example, consider the following: *A = a; *B = b; ACQUIRE *C = c; *D = d; RELEASE *E = e; *F = f; The following sequence of events is acceptable: ACQUIRE, {*F,*A}, *E, {*C,*D}, *B, RELEASE So if we assume that *C is modifying the flag which the waitqueue is checking, and *E is the actual wakeup, then those accesses can be re-ordered... IMHO this code should be considered broken... Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 90b2da89 ] When a buffer is queued or requeued in vb2_buffer_done, then don't call the finish memop. In this case the buffer is only returned to vb2, not to userspace. Calling 'finish' here will cause an unbalance when the queue is canceled, since the core will call the same memop again. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Eyal Reizer authored
[ Upstream commit 6e91d483 ] the wl pointer can be null In case only wlcore_sdio is probed while no WiLink module is successfully probed, as in the case of mounting a wl12xx module while using a device tree file configured with wl18xx related settings. In this case the system was crashing in wl1271_suspend() as platform device data is not set. Make sure wl the pointer is valid before using it. Signed-off-by:
Eyal Reizer <eyalr@ti.com> Signed-off-by:
-
Ganapathi Bhat authored
[ Upstream commit b817047a ] Race condition is observed during rmmod of mwifiex_usb: 1. The rmmod thread will call mwifiex_usb_disconnect(), download SHUTDOWN command and do wait_event_interruptible_timeout(), waiting for response. 2. The main thread will handle the response and will do a wake_up_interruptible(), unblocking rmmod thread. 3. On getting unblocked, rmmod thread will make rx_cmd.urb = NULL in mwifiex_usb_free(). 4. The main thread will try to resubmit rx_cmd.urb in mwifiex_usb_submit_rx_urb(), which is NULL. To fix, wait for main thread to complete before calling mwifiex_usb_free(). Signed-off-by:
Ganapathi Bhat <gbhat@marvell.com> Signed-off-by:
-
Vincent Palatin authored
[ Upstream commit 0dbbf255 ] If we cannot communicate with the EC chip to detect the protocol version and its features, it's very likely useless to continue. Else we will commit all kind of uninformed mistakes (using the wrong protocol, the wrong buffer size, mixing the EC with other chips). Signed-off-by:
Vincent Palatin <vpalatin@chromium.org> Acked-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Gwendal Grignou <gwendal@chromium.org> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Kai Chieh Chuang authored
[ Upstream commit 9c0ac70a ] In case, one BE is used by two FE1/FE2 FE1--->BE--> | FE2----] when FE1/FE2 call dpcm_be_dai_hw_free() together the BE users will be 2 (> 1), hence cannot be hw_free the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP later FE1/FE2 call dpcm_be_dai_shutdown(), will be skip due to wrong state. leaving the BE not being hw_free and shutdown. The BE dai will be hw_free later when calling dpcm_be_dai_shutdown() if still in invalid state. Signed-off-by:
KaiChieh Chuang <kaichieh.chuang@mediatek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jian-Hong Pan authored
[ Upstream commit 66d9975c ] Without this patch we cannot turn on the Bluethooth adapter on ASUS E406MA. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2ff8 ProdID=b011 Rev= 2.00 S: Manufacturer=Realtek S: Product=802.11n WLAN Adapter S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by:
Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Thierry Escande authored
[ Upstream commit 9960521c ] This patch fixes the following warning during boot: do not call blocking ops when !TASK_RUNNING; state=1 set at [<(ptrval)>] qca_setup+0x194/0x750 [hci_uart] WARNING: CPU: 2 PID: 1878 at kernel/sched/core.c:6135 __might_sleep+0x7c/0x88 In qca_set_baudrate(), the current task state is set to TASK_UNINTERRUPTIBLE before going to sleep for 300ms. It was then restored to TASK_INTERRUPTIBLE. This patch sets the current task state back to TASK_RUNNING instead. Signed-off-by:
Thierry Escande <thierry.escande@linaro.org> Signed-off-by:
-
Shaul Triebitz authored
[ Upstream commit 0f22e400 ] Make sure the rx_allocator worker is canceled before running the rx_init routine. rx_init frees and re-allocates all rxb's pages. The rx_allocator worker also allocates pages for the used rxb's. Running rx_init and rx_allocator simultaniously causes a kernel panic. Fix that by canceling the work in rx_init. Signed-off-by:
Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit d71f11c0 ] For Nehalem and Westmere, there is only one fixed counter for W-Box. There is no index which is bigger than UNCORE_PMC_IDX_FIXED. It is not correct to use >= to check fixed counter. The code quality issue will bring problem when new counter index is introduced. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: acme@kernel.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1525371913-10597-2-git-send-email-kan.liang@intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kan Liang authored
[ Upstream commit 4749f819 ] There is no index which is bigger than UNCORE_PMC_IDX_FIXED. The only exception is client IMC uncore, which has been specially handled. For generic code, it is not correct to use >= to check fixed counter. The code quality issue will bring problem when a new counter index is introduced. Signed-off-by:
-
Shuah Khan (Samsung OSG) authored
[ Upstream commit d179f99a ] detach_port() fails to call usbip_vhci_driver_close() from its error path after usbip_vhci_detach_device() returns failure, leaking memory allocated in usbip_vhci_driver_open() and holding udev_context and udev references. Fix it to call usbip_vhci_driver_close(). Signed-off-by:
Shuah Khan (Samsung OSG) <shuah@kernel.org> Signed-off-by:
-
Chao Yu authored
[ Upstream commit 64c74a7a ] - f2fs_fill_super - recover_fsync_data - recover_data - del_fsync_inode - iput - iput_final - write_inode_now - f2fs_write_inode - f2fs_balance_fs - f2fs_balance_fs_bg - sync_dirty_inodes With data_flush mount option, during recovery, in order to avoid entering above writeback flow, let's detect recovery status and do skip in f2fs_balance_fs_bg. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by:
-
Anatoly Pugachev authored
[ Upstream commit 4071e67c ] The following patch disables loading of f2fs module on architectures which have PAGE_SIZE > 4096 , since it is impossible to mount f2fs on such architectures , log messages are: mount: /mnt: wrong fs type, bad option, bad superblock on /dev/vdiskb1, missing codepage or helper program, or other error. /dev/vdiskb1: F2FS filesystem, UUID=1d8b9ca4-2389-4910-af3b-10998969f09c, volume name "" May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid page_cache_size (8192), supports only 4KB May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS filesystem in 1th superblock May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid page_cache_size (8192), supports only 4KB May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Can't find valid F2FS filesystem in 2th superblock May 15 18:03:13 ttip kernel: F2FS-fs (vdiskb1): Invalid page_cache_size (8192), supports only 4KB which was introduced by git commit 5c9b4692 tested on git kernel 4.17.0-rc6-00309-gec30dcf7 with patch applied: modprobe: ERROR: could not insert 'f2fs': Invalid argument May 28 01:40:28 v215 kernel: F2FS not supported on PAGE_SIZE(8192) != 4096 Signed-off-by:
Anatoly Pugachev <matorola@gmail.com> Reviewed-by:
-
Leon Romanovsky authored
[ Upstream commit 2468b82d ] Let's perform checks in-place instead of BUG_ONs. Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit 926bc2f1 ] The stores to update the SLB shadow area must be made as they appear in the C code, so that the hypervisor does not see an entry with mismatched vsid and esid. Use WRITE_ONCE for this. GCC has been observed to elide the first store to esid in the update, which means that if the hypervisor interrupts the guest after storing to vsid, it could see an entry with old esid and new vsid, which may possibly result in memory corruption. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Stewart Smith authored
[ Upstream commit 447808bf ] time_init() will set up tb_ticks_per_usec based on reality. time_init() is called *after* udbg_init_opal_common() during boot. from arch/powerpc/kernel/time.c: unsigned long tb_ticks_per_usec = 100; /* sane default */ Currently, all powernv systems have a timebase frequency of 512mhz (512000000/1000000 == 0x200) - although there's nothing written down anywhere that I can find saying that we couldn't make that different based on the requirements in the ISA. So, we've been (accidentally) thwacking the (currently) correct (for powernv at least) value for tb_ticks_per_usec earlier than we otherwise would have. The "sane default" seems to be adequate for our purposes between udbg_init_opal_common() and time_init() being called, and if it isn't, then we should probably be setting it somewhere that isn't hvc_opal.c! Signed-off-by:
Stewart Smith <stewart@linux.ibm.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit cb2595c1 ] ucma_process_join() will free the new allocated "mc" struct, if there is any error after that, especially the copy_to_user(). But in parallel, ucma_leave_multicast() could find this "mc" through idr_find() before ucma_process_join() frees it, since it is already published. So "mc" could be used in ucma_leave_multicast() after it is been allocated and freed in ucma_process_join(), since we don't refcnt it. Fix this by separating "publish" from ID allocation, so that we can get an ID first and publish it later after copy_to_user(). Fixes: c8f6a362 ("RDMA/cma: Add multicast communication support") Reported-by:
Noam Rathaus <noamr@beyondsecurity.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Jozsef Kadlecsik authored
[ Upstream commit bd975e69 ] When listing sets with timeout support, there's a probability that just timing out entries with "0" timeout value is listed/saved. However when restoring the saved list, the zero timeout value means permanent elelements. The new behaviour is that timing out entries are listed with "timeout 1" instead of zero. Fixes netfilter bugzilla #1258. Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit abfdff44 ] When using RTC_ALM_SET or RTC_WKALM_SET with rtc_wkalrm.enabled not set, rtc_timer_enqueue() is not called and rtc_set_alarm() may succeed but the subsequent RTC_AIE_ON ioctl will fail. RTC_ALM_READ would also fail in that case. Ensure rtc_set_alarm() fails when alarms are not supported to avoid letting programs think the alarms are working for a particular RTC when they are not. Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Mathieu Malaterre authored
[ Upstream commit a38965bf ] __printf is useful to verify format and arguments. Remove the following warning (with W=1): mm/slub.c:721:2: warning: function might be possible candidate for `gnu_printf' format attribute [-Wsuggest-attribute=format] Link: http://lkml.kernel.org/r/20180505200706.19986-1-malat@debian.orgSigned-off-by:
Mathieu Malaterre <malat@debian.org> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Chintan Pandya authored
[ Upstream commit f3c01d2f ] Currently, __vunmap flow is, 1) Release the VM area 2) Free the debug objects corresponding to that vm area. This leave some race window open. 1) Release the VM area 1.5) Some other client gets the same vm area 1.6) This client allocates new debug objects on the same vm area 2) Free the debug objects corresponding to this vm area. Here, we actually free 'other' client's debug objects. Fix this by freeing the debug objects first and then releasing the VM area. Link: http://lkml.kernel.org/r/1523961828-9485-2-git-send-email-cpandya@codeaurora.orgSigned-off-by:
Chintan Pandya <cpandya@codeaurora.org> Reviewed-by:
-
Scott Mayhew authored
[ Upstream commit 3171822f ] When running a fuzz tester against a KASAN-enabled kernel, the following splat periodically occurs. The problem occurs when the test sends a GETDEVICEINFO request with a malformed xdr array (size but no data) for gdia_notify_types and the array size is > 0x3fffffff, which results in an overflow in the value of nbytes which is passed to read_buf(). If the array size is 0x40000000, 0x80000000, or 0xc0000000, then after the overflow occurs, the value of nbytes 0, and when that happens the pointer returned by read_buf() points to the end of the xdr data (i.e. argp->end) when really it should be returning NULL. Fix this by returning NFS4ERR_BAD_XDR if the array size is > 1000 (this value is arbitrary, but it's the same threshold used by nfsd4_decode_bitmap()... in could really be any value >= 1 since it's expected to get at most a single bitmap in gdia_notify_types). [ 119.256854] ================================================================== [ 119.257611] BUG: KASAN: use-after-free in nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.258422] Read of size 4 at addr ffff880113ada000 by task nfsd/538 [ 119.259146] CPU: 0 PID: 538 Comm: nfsd Not tainted 4.17.0+ #1 [ 119.259662] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014 [ 119.261202] Call Trace: [ 119.262265] dump_stack+0x71/0xab [ 119.263371] print_address_description+0x6a/0x270 [ 119.264609] kasan_report+0x258/0x380 [ 119.265854] ? nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.267291] nfsd4_decode_getdeviceinfo+0x5a4/0x5b0 [nfsd] [ 119.268549] ? nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.269873] ? nfsd4_decode_sequence+0x490/0x490 [nfsd] [ 119.271095] nfs4svc_decode_compoundargs+0xa5b/0x13c0 [nfsd] [ 119.272393] ? nfsd4_release_compoundargs+0x1b0/0x1b0 [nfsd] [ 119.273658] nfsd_dispatch+0x183/0x850 [nfsd] [ 119.274918] svc_process+0x161c/0x31a0 [sunrpc] [ 119.276172] ? svc_printk+0x190/0x190 [sunrpc] [ 119.277386] ? svc_xprt_release+0x451/0x680 [sunrpc] [ 119.278622] nfsd+0x2b9/0x430 [nfsd] [ 119.279771] ? nfsd_destroy+0x1c0/0x1c0 [nfsd] [ 119.281157] kthread+0x2db/0x390 [ 119.282347] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 119.283756] ret_from_fork+0x35/0x40 [ 119.286041] Allocated by task 436: [ 119.287525] kasan_kmalloc+0xa0/0xd0 [ 119.288685] kmem_cache_alloc+0xe9/0x1f0 [ 119.289900] get_empty_filp+0x7b/0x410 [ 119.291037] path_openat+0xca/0x4220 [ 119.292242] do_filp_open+0x182/0x280 [ 119.293411] do_sys_open+0x216/0x360 [ 119.294555] do_syscall_64+0xa0/0x2f0 [ 119.295721] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 119.298068] Freed by task 436: [ 119.299271] __kasan_slab_free+0x130/0x180 [ 119.300557] kmem_cache_free+0x78/0x210 [ 119.301823] rcu_process_callbacks+0x35b/0xbd0 [ 119.303162] __do_softirq+0x192/0x5ea [ 119.305443] The buggy address belongs to the object at ffff880113ada000 which belongs to the cache filp of size 256 [ 119.308556] The buggy address is located 0 bytes inside of 256-byte region [ffff880113ada000, ffff880113ada100) [ 119.311376] The buggy address belongs to the page: [ 119.312728] page:ffffea00044eb680 count:1 mapcount:0 mapping:0000000000000000 index:0xffff880113ada780 [ 119.314428] flags: 0x17ffe000000100(slab) [ 119.315740] raw: 0017ffe000000100 0000000000000000 ffff880113ada780 00000001000c0001 [ 119.317379] raw: ffffea0004553c60 ffffea00045c11e0 ffff88011b167e00 0000000000000000 [ 119.319050] page dumped because: kasan: bad access detected [ 119.321652] Memory state around the buggy address: [ 119.322993] ffff880113ad9f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.324515] ffff880113ad9f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 119.326087] >ffff880113ada000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.327547] ^ [ 119.328730] ffff880113ada080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 119.330218] ffff880113ada100: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 119.331740] ================================================================== Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit ef1ffbe7 ] When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by:
Zhouyang Jia <jiazhouyang09@gmail.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Zhouyang Jia authored
[ Upstream commit 6d531e7b ] When snd_ctl_add fails, the lack of error-handling code may cause unexpected results. This patch adds error-handling code after calling snd_ctl_add. Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 57f230ab ] The max number of slots used in xennet_get_responses() is set to MAX_SKB_FRAGS + (rx->status <= RX_COPY_THRESHOLD). In old kernel-xen MAX_SKB_FRAGS was 18, while nowadays it is 17. This difference is resulting in frequent messages "too many slots" and a reduced network throughput for some workloads (factor 10 below that of a kernel-xen based guest). Replacing MAX_SKB_FRAGS by XEN_NETIF_NR_SLOTS_MIN for calculation of the max number of slots to use solves that problem (tests showed no more messages "too many slots" and throughput was as high as with the kernel-xen based guest system). Replace MAX_SKB_FRAGS-2 by XEN_NETIF_NR_SLOTS_MIN-1 in netfront_tx_slot_available() for making it clearer what is really being tested without actually modifying the tested value. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 2519c1bb upstream. Commit 57ea2a34 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") added an if statement that depends on another if statement that gcc doesn't see will initialize the "link" variable and gives the warning: "warning: 'link' may be used uninitialized in this function" It is really a false positive, but to quiet the warning, and also to make sure that it never actually is used uninitialized, initialize the "link" variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler thinks it could be used uninitialized. Cc: stable@vger.kernel.org Fixes: 57ea2a34 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Artem Savkov authored
commit 57ea2a34 upstream. If enable_trace_kprobe fails to enable the probe in enable_k(ret)probe it returns an error, but does not unset the tp flags it set previously. This results in a probe being considered enabled and failures like being unable to remove the probe through kprobe_events file since probes_open() expects every probe to be disabled. Link: http://lkml.kernel.org/r/20180725102826.8300-1-asavkov@redhat.com Link: http://lkml.kernel.org/r/20180725142038.4765-1-asavkov@redhat.com Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 41a7dd42 ("tracing/kprobes: Support ftrace_event_file base multibuffer") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Artem Savkov <asavkov@redhat.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 15cc7864 upstream. There was a case that triggered a double free in event_trigger_callback() due to the called reg() function freeing the trigger_data and then it getting freed again by the error return by the caller. The solution there was to up the trigger_data ref count. Code inspection found that event_enable_trigger_func() has the same issue, but is not as easy to trigger (requires harder to trigger failures). It needs to be solved slightly different as it needs more to clean up when the reg() function fails. Link: http://lkml.kernel.org/r/20180725124008.7008e586@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 7862ad18 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands") Reivewed-by:
-
Steven Rostedt (VMware) authored
commit 1863c387 upstream. Running the following: # cd /sys/kernel/debug/tracing # echo 500000 > buffer_size_kb [ Or some other number that takes up most of memory ] # echo snapshot > events/sched/sched_switch/trigger Triggers the following bug: ------------[ cut here ]------------ kernel BUG at mm/slub.c:296! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 6 PID: 6878 Comm: bash Not tainted 4.18.0-rc6-test+ #1066 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:kfree+0x16c/0x180 Code: 05 41 0f b6 72 51 5b 5d 41 5c 4c 89 d7 e9 ac b3 f8 ff 48 89 d9 48 89 da 41 b8 01 00 00 00 5b 5d 41 5c 4c 89 d6 e9 f4 f3 ff ff <0f> 0b 0f 0b 48 8b 3d d9 d8 f9 00 e9 c1 fe ff ff 0f 1f 40 00 0f 1f RSP: 0018:ffffb654436d3d88 EFLAGS: 00010246 RAX: ffff91a9d50f3d80 RBX: ffff91a9d50f3d80 RCX: ffff91a9d50f3d80 RDX: 00000000000006a4 RSI: ffff91a9de5a60e0 RDI: ffff91a9d9803500 RBP: ffffffff8d267c80 R08: 00000000000260e0 R09: ffffffff8c1a56be R10: fffff0d404543cc0 R11: 0000000000000389 R12: ffffffff8c1a56be R13: ffff91a9d9930e18 R14: ffff91a98c0c2890 R15: ffffffff8d267d00 FS: 00007f363ea64700(0000) GS:ffff91a9de580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c1cacc8e10 CR3: 00000000d9b46003 CR4: 00000000001606e0 Call Trace: event_trigger_callback+0xee/0x1d0 event_trigger_write+0xfc/0x1a0 __vfs_write+0x33/0x190 ? handle_mm_fault+0x115/0x230 ? _cond_resched+0x16/0x40 vfs_write+0xb0/0x190 ksys_write+0x52/0xc0 do_syscall_64+0x5a/0x160 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f363e16ab50 Code: 73 01 c3 48 8b 0d 38 83 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 79 db 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 1e e3 01 00 48 89 04 24 RSP: 002b:00007fff9a4c6378 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f363e16ab50 RDX: 0000000000000009 RSI: 000055c1cacc8e10 RDI: 0000000000000001 RBP: 000055c1cacc8e10 R08: 00007f363e435740 R09: 00007f363ea64700 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000009 R13: 0000000000000001 R14: 00007f363e4345e0 R15: 00007f363e4303c0 Modules linked in: ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device i915 snd_pcm snd_timer i2c_i801 snd soundcore i2c_algo_bit drm_kms_helper 86_pkg_temp_thermal video kvm_intel kvm irqbypass wmi e1000e ---[ end trace d301afa879ddfa25 ]--- The cause is because the register_snapshot_trigger() call failed to allocate the snapshot buffer, and then called unregister_trigger() which freed the data that was passed to it. Then on return to the function that called register_snapshot_trigger(), as it sees it failed to register, it frees the trigger_data again and causes a double free. By calling event_trigger_init() on the trigger_data (which only ups the reference counter for it), and then event_trigger_free() afterward, the trigger_data would not get freed by the registering trigger function as it would only up and lower the ref count for it. If the register trigger function fails, then the event_trigger_free() called after it will free the trigger data normally. Link: http://lkml.kernel.org/r/20180724191331.738eb819@gandalf.local.home Cc: stable@vger.kerne.org Fixes: 93e31ffb ("tracing: Add 'snapshot' event trigger command") Reported-by:
-
KT Liao authored
commit 6f88a643 upstream. Add ELAN0622 to ACPI mapping table to support Elan touchpad found in Ideapad 330-15AST. Signed-off-by:
KT Liao <kt.liao@emc.com.tw> Reported-by:
Anant Shende <anantshende@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 384cf428 upstream. The Lenovo LaVie Z laptop requires i8042 to be reset in order to consistently detect its Elantech touchpad. The nomux and kbdreset quirks are not sufficient. It's possible the other LaVie Z models from NEC require this as well. Cc: stable@vger.kernel.org Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Donald Shanty III authored
commit 938f4500 upstream. This allows Elan driver to bind to the touchpad found in Lenovo Ideapad 330 series laptops. Signed-off-by:
Donald Shanty III <dshanty@protonmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Paul Burton authored
commit 38c0a74f upstream. The MIPS implementation of pci_resource_to_user() introduced in v3.12 by commit 4c2924b7 ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") incorrectly sets *end to the address of the byte after the resource, rather than the last byte of the resource. This results in userland seeing resources as a byte larger than they actually are, for example a 32 byte BAR will be reported by a tool such as lspci as being 33 bytes in size: Region 2: I/O ports at 1000 [disabled] [size=33] Correct this by subtracting one from the calculated end address, reporting the correct address to userland. Signed-off-by:
Paul Burton <paul.burton@mips.com> Reported-by:
Rui Wang <rui.wang@windriver.com> Fixes: 4c2924b7 ("MIPS: PCI: Use pci_resource_to_user to map pci memory space properly") Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v3.12+ Patchwork: https://patchwork.linux-mips.org/patch/19829/Signed-off-by:
-
- 28 Jul, 2018 1 commit
-
-
Greg Kroah-Hartman authored
-
