- 13 Aug, 2019 32 commits
-
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). This driver does not utilise the i2c_device_id table in the probe, so we can easily convert it to utilise the simplified i2c driver registration. Signed-off-by:
-
Kieran Bingham authored
The I2C core framework provides a simplified probe framework from commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"). Convert the ADV748x to utilise this simplified i2c driver registration. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in four places. Issue found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in two places. Issue found with Coccinelle. Signed-off-by:
Houlong Wei <houlong.wei@mediatek.com> Signed-off-by:
-
Geert Uytterhoeven authored
When support for the IPMMU is not enabled, the FDP driver may be probe-deferred multiple times, causing several messages to be printed like: rcar_fdp1 fe940000.fdp1: FCP not found (-517) rcar_fdp1 fe944000.fdp1: FCP not found (-517) Fix this by reducing the message level to debug level, as is done in the VSP1 driver. Fixes: 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver") Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Fuqian Huang authored
Replace kmalloc followed by a memset with kzalloc. Signed-off-by:
Fuqian Huang <huangfq.daxian@gmail.com> Acked-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
No need to check a retval after we assigned a constant to it. Signed-off-by:
-
Wolfram Sang authored
Move away from the to-be-removed i2c_new_dummy() to i2c_new_dummy_device(). So, we now get an ERRPTR which we use in error handling by printing the error code. To keep the rest of the driver logic as is, internally a NULL ptr is still kept. Signed-off-by:
-
Wolfram Sang authored
i2c_new_dummy() can fail returning a NULL pointer. This is not checked and the returned pointer is blindly used. Convert to devm_i2c_new_dummy_client() which returns an ERR_PTR and also add a validity check. Using devm_* here also fixes a leak because the dummy client was not released in the probe error path. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Wolfram Sang authored
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by:
-
Matthias Brugger authored
of_get_next_child() increments the reference count of the returning device_node. Decrement it in the check if we are using the old or the new DTB. Fixes: ba1f1f70 ("[media] media: mtk-mdp: Fix mdp device tree") Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Acked-by:
-
Jernej Skrabec authored
Scale and rotation are currently not implemented, so it makes no sense to set chroma size for it. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Jernej Skrabec authored
This array is just duplicated capture buffer queue. Remove it and adjust code to look into capture buffer queue instead. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Helen Koike authored
This reverts commit b6c61a6c. The requested pixelformat is being propagated from the capture to the tpg in the sensor. This was a bad design choice, as we start having the following issues: * We set a pixelformat in the capture; * We set matching media bus formats in the subdevices pads; * Link validate looks fine (sizes matches, media bus formats matches); * Issue: if some of the subdevice doesn't know how to generate the requested pixelformat in the capture, then stream_on fails. This is bad because capture says it supports that pixelformat, everything looks fine, but it is not, and there is no way to find it out through the links. This patch was implemented so we could request any pixelformat from the pipeline regardeless of the media bus format configured between pads. Not all pixelformat can be mapped into a media bus code (e.g. multiplanar formats), so with this patch we could request those pixelformats from the tpg. Solution: map pixelformats to media bus codes as before, and implement conversions to other pixelformats in the capture to support multiplanar. So first step to this solution is to revert this patch. Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
Lucas A. M. Magalhaes <lucmaga@gmail.com> Tested-by:
André Almeida <andrealmeid@collabora.com> Signed-off-by:
-
Helen Koike authored
This reverts commit 3c1b9ac7. Required to Revert "media: vimc: propagate pixel format in the stream" which introduced the stream object in the vimc_ent_device struct. Signed-off-by:
-
Niklas Söderlund authored
The image stride was adjusted when it was written to hardware and not when configuring the format. Calculate the correct stride value and report it to userspace. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
Convert omap_vout to the vb2 framework. After this change 'v4l2-compliance -s' passes all tests. As usual, this vb2 conversion is a 'big bang' patch and hard to read. Tested on a Pandaboard and a Beagle XM board. Signed-off-by:
-
Hans Verkuil authored
This patch fixes the following v4l2-compliance failures: - FIELD_ANY could be returned, which is not allowed. - JPEG colorspace was set instead of SRGB. - No control events. - Empty bus_info in QUERYCAP. - Overlay format handling wasn't zeroing bitmap/clips and didn't return the chromakey correctly. - G_FBUF didn't fill in many of the v4l2_framebuffer values. Now also return the base address of the corresponding framebuffer that this overlays. - Missing ENUM/G/S_OUTPUT ioctls. - ROTATE/VFLIP controls were added when the HW didn't support them. With these changes 'v4l2-compliance' passes all non-streaming tests. Tested on a Pandaboard and a Beagle XM board. Signed-off-by:
-
- 12 Aug, 2019 2 commits
-
-
Mauro Carvalho Chehab authored
Linux 5.3-rc4 * tag 'v5.3-rc4': (750 commits) Linux 5.3-rc4 Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang ARM: ep93xx: Mark expected switch fall-through scsi: fas216: Mark expected switch fall-throughs pcmcia: db1xxx_ss: Mark expected switch fall-throughs video: fbdev: omapfb_main: Mark expected switch fall-throughs watchdog: riowd: Mark expected switch fall-through s390/net: Mark expected switch fall-throughs crypto: ux500/crypt: Mark expected switch fall-throughs watchdog: wdt977: Mark expected switch fall-through watchdog: scx200_wdt: Mark expected switch fall-through watchdog: Mark expected switch fall-throughs ARM: signal: Mark expected switch fall-through mfd: omap-usb-host: Mark expected switch fall-throughs mfd: db8500-prcmu: Mark expected switch fall-throughs ARM: OMAP: dma: Mark expected switch fall-throughs ARM: alignment: Mark expected switch fall-throughs ARM: tegra: Mark expected switch fall-through ARM/hw_breakpoint: Mark expected switch fall-throughs mm/memremap: Fix reuse of pgmap instances with internal references ...
-
Hans Verkuil authored
The dma_mask and coherent_dma_mask values were never set. This prevented the media omap_vout driver from loading successfully. Tested on a Pandaboard and Beagle XM board. Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
- 11 Aug, 2019 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull dax fixes from Dan Williams: "A filesystem-dax and device-dax fix for v5.3. The filesystem-dax fix is tagged for stable as the implementation has been mistakenly throwing away all cow pages on any truncate or hole punch operation as part of the solution to coordinate device-dma vs truncate to dax pages. The device-dax change fixes up a regression this cycle from the introduction of a common 'internal per-cpu-ref' implementation. Summary: - Fix dax_layout_busy_page() to not discard private cow pages of fs/dax private mappings. - Update the memremap_pages core to properly cleanup on behalf of internal reference-count users like device-dax" * tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: mm/memremap: Fix reuse of pgmap instances with internal references dax: dax_layout_busy_page() should not unmap cow pages -
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fix from Jon Mason: "Bug fix for NTB MSI kernel compile warning" * tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb: NTB/msi: remove incorrect MODULE defines
-
- 10 Aug, 2019 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V updates from Paul Walmsley: "A few minor RISC-V updates for v5.3-rc4: - Remove __udivdi3() from the 32-bit Linux port, converting the only upstream user to use do_div(), per Linux policy - Convert the RISC-V standard clocksource away from per-cpu data structures, since only one is used by Linux, even on a multi-CPU system - A set of DT binding updates that remove an obsolete text binding in favor of a YAML binding, fix a bogus compatible string in the schema (thus fixing a "make dtbs_check" warning), and clarifies the future values expected in one of the RISC-V CPU properties" * tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board dt-bindings: riscv: remove obsolete cpus.txt RISC-V: Remove udivdi3 riscv: delay: use do_div() instead of __udivdi3() dt-bindings: Update the riscv,isa string description RISC-V: Remove per cpu clocksource -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A few fixes for x86: - Don't reset the carefully adjusted build flags for the purgatory and remove the unwanted flags instead. The 'reset all' approach led to build fails under certain circumstances. - Unbreak CLANG build of the purgatory by avoiding the builtin memcpy/memset implementations. - Address missing prototype warnings by including the proper header - Fix yet more fall-through issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/lib/cpu: Address missing prototypes warning x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS x86/purgatory: Do not use __builtin_memcpy and __builtin_memset x86: mtrr: cyrix: Mark expected switch fall-through x86/ptrace: Mark expected switch fall-through -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Thomas Gleixner: "Perf tooling fixes all over the place: - Fix the selection of the main thread COMM in db-export - Fix the disassemmbly display for BPF in annotate - Fix cpumap mask setup in perf ftrace when only one CPU is present - Add the missing 'cpu_clk_unhalted.core' event - Fix CPU 0 bindings in NUMA benchmarks - Fix the module size calculations for s390 - Handle the gap between kernel end and module start on s390 correctly - Build and typo fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf pmu-events: Fix missing "cpu_clk_unhalted.core" event perf annotate: Fix s390 gap between kernel end and module start perf record: Fix module size on s390 perf tools: Fix include paths in ui directory perf tools: Fix a typo in a variable name in the Documentation Makefile perf cpumap: Fix writing to illegal memory in handling cpumap mask perf ftrace: Fix failure to set cpumask when only one cpu is present perf db-export: Fix thread__exec_comm() perf annotate: Fix printing of unaugmented disassembled instructions from BPF perf bench numa: Fix cpu0 binding
-
