- 10 Aug, 2016 13 commits
-
-
Mel Gorman authored
commit ef70b6f4 upstream. early_page_uninitialised looks up an arbitrary PFN. While a machine without node 0 will boot with "mm, page_alloc: Always return a valid node from early_pfn_to_nid", it works because it assumes that nodes are always in PFN order. This is not guaranteed so this patch adds robustness by always checking if the node being checked is online. Link: http://lkml.kernel.org/r/1468008031-3848-4-git-send-email-mgorman@techsingularity.netSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mel Gorman authored
commit e4568d38 upstream. early_pfn_to_nid can return node 0 if a PFN is invalid on machines that has no node 0. A machine with only node 1 was observed to crash with the following message: BUG: unable to handle kernel paging request at 000000000002a3c8 PGD 0 Modules linked in: Hardware name: Supermicro H8DSP-8/H8DSP-8, BIOS 080011 06/30/2006 task: ffffffff81c0d500 ti: ffffffff81c00000 task.ti: ffffffff81c00000 RIP: reserve_bootmem_region+0x6a/0xef CR2: 000000000002a3c8 CR3: 0000000001c06000 CR4: 00000000000006b0 Call Trace: free_all_bootmem+0x4b/0x12a mem_init+0x70/0xa3 start_kernel+0x25b/0x49b The problem is that early_page_uninitialised uses the early_pfn_to_nid helper which returns node 0 for invalid PFNs. No caller of early_pfn_to_nid cares except early_page_uninitialised. This patch has early_pfn_to_nid always return a valid node. Link: http://lkml.kernel.org/r/1468008031-3848-3-git-send-email-mgorman@techsingularity.netSigned-off-by:
-
David Rientjes authored
commit a46cbf3b upstream. It's possible to isolate some freepages in a pageblock and then fail split_free_page() due to the low watermark check. In this case, we hit VM_BUG_ON() because the freeing scanner terminated early without a contended lock or enough freepages. This should never have been a VM_BUG_ON() since it's not a fatal condition. It should have been a VM_WARN_ON() at best, or even handled gracefully. Regardless, we need to terminate anytime the full pageblock scan was not done. The logic belongs in isolate_freepages_block(), so handle its state gracefully by terminating the pageblock loop and making a note to restart at the same pageblock next time since it was not possible to complete the scan this time. [rientjes@google.com: don't rescan pages in a pageblock] Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1607111244150.83138@chino.kir.corp.google.com Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606291436300.145590@chino.kir.corp.google.comSigned-off-by:
Minchan Kim <minchan@kernel.org> Tested-by:
-
Torsten Hilbrich authored
commit 63d2f95d upstream. The value `bytes' comes from the filesystem which is about to be mounted. We cannot trust that the value is always in the range we expect it to be. Check its value before using it to calculate the length for the crc32_le call. It value must be larger (or equal) sumoff + 4. This fixes a kernel bug when accidentially mounting an image file which had the nilfs2 magic value 0x3434 at the right offset 0x406 by chance. The bytes 0x01 0x00 were stored at 0x408 and were interpreted as a s_bytes value of 1. This caused an underflow when substracting sumoff + 4 (20) in the call to crc32_le. BUG: unable to handle kernel paging request at ffff88021e600000 IP: crc32_le+0x36/0x100 ... Call Trace: nilfs_valid_sb.part.5+0x52/0x60 [nilfs2] nilfs_load_super_block+0x142/0x300 [nilfs2] init_nilfs+0x60/0x390 [nilfs2] nilfs_mount+0x302/0x520 [nilfs2] mount_fs+0x38/0x160 vfs_kern_mount+0x67/0x110 do_mount+0x269/0xe00 SyS_mount+0x9f/0x100 entry_SYSCALL_64_fastpath+0x16/0x71 Link: http://lkml.kernel.org/r/1466778587-5184-2-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Torsten Hilbrich <torsten.hilbrich@secunet.com> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
David Rientjes authored
commit a4f04f2c upstream. If the memory compaction free scanner cannot successfully split a free page (only possible due to per-zone low watermark), terminate the free scanner rather than continuing to scan memory needlessly. If the watermark is insufficient for a free page of order <= cc->order, then terminate the scanner since all future splits will also likely fail. This prevents the compaction freeing scanner from scanning all memory on very large zones (very noticeable for zones > 128GB, for instance) when all splits will likely fail while holding zone->lock. compaction_alloc() iterating a 128GB zone has been benchmarked to take over 400ms on some systems whereas any free page isolated and ready to be split ends up failing in split_free_page() because of the low watermark check and thus the iteration continues. The next time compaction occurs, the freeing scanner will likely start at the end of the zone again since no success was made previously and we get the same lengthy iteration until the zone is brought above the low watermark. All thp page faults can take >400ms in such a state without this fix. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1606211820350.97086@chino.kir.corp.google.comSigned-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Mel Gorman authored
commit e838a45f upstream. Commit d0164adc ("mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd") modified __GFP_WAIT to explicitly identify the difference between atomic callers and those that were unwilling to sleep. Later the definition was removed entirely. The GFP_RECLAIM_MASK is the set of flags that affect watermark checking and reclaim behaviour but __GFP_ATOMIC was never added. Without it, atomic users of the slab allocator strip the __GFP_ATOMIC flag and cannot access the page allocator atomic reserves. This patch addresses the problem. The user-visible impact depends on the workload but potentially atomic allocations unnecessarily fail without this path. Link: http://lkml.kernel.org/r/20160610093832.GK2527@techsingularity.netSigned-off-by:
Marcin Wojtas <mw@semihalf.com> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Ludovic Desroches authored
commit 9295c41d upstream. Due to the way CUBC register is updated, a double flush is needed to compute an accurate residue. First flush aim is to get data from the DMA FIFO and second one ensures that we won't report data which are not in memory. Signed-off-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Reviewed-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Ludovic Desroches authored
commit 53398f48 upstream. An unexpected value of CUBC can lead to a corrupted residue. A more complex sequence is needed to detect an inaccurate value for NCA or CUBC. Signed-off-by:
-
Ludovic Desroches authored
commit 4a9723e8 upstream. Having descriptors aligned on 64 bits allows update CNDA and CUBC in an atomic way. Signed-off-by:
-
Lukas Wunner authored
commit abb2bafd upstream. The EFI firmware on Macs contains a full-fledged network stack for downloading OS X images from osrecovery.apple.com. Unfortunately on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331 wireless card on every boot and leaves it enabled even after ExitBootServices has been called. The card continues to assert its IRQ line, causing spurious interrupts if the IRQ is shared. It also corrupts memory by DMAing received packets, allowing for remote code execution over the air. This only stops when a driver is loaded for the wireless card, which may be never if the driver is not installed or blacklisted. The issue seems to be constrained to the Broadcom 4331. Chris Milsted has verified that the newer Broadcom 4360 built into the MacBookPro11,3 (2013/2014) does not exhibit this behaviour. The chances that Apple will ever supply a firmware fix for the older machines appear to be zero. The solution is to reset the card on boot by writing to a reset bit in its mmio space. This must be done as an early quirk and not as a plain vanilla PCI quirk to successfully combat memory corruption by DMAed packets: Matthew Garrett found out in 2012 that the packets are written to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html). This type of memory is made available to the page allocator by efi_free_boot_services(). Plain vanilla PCI quirks run much later, in subsys initcall level. In-between a time window would be open for memory corruption. Random crashes occurring in this time window and attributed to DMAed packets have indeed been observed in the wild by Chris Bainbridge. When Matthew Garrett analyzed the memory corruption issue in 2012, he sought to fix it with a grub quirk which transitions the card to D3hot: http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56 This approach does not help users with other bootloaders and while it may prevent DMAed packets, it does not cure the spurious interrupts emanating from the card. Unfortunately the card's mmio space is inaccessible in D3hot, so to reset it, we have to undo the effect of Matthew's grub patch and transition the card back to D0. Note that the quirk takes a few shortcuts to reduce the amount of code: The size of BAR 0 and the location of the PM capability is identical on all affected machines and therefore hardcoded. Only the address of BAR 0 differs between models. Also, it is assumed that the BCMA core currently mapped is the 802.11 core. The EFI driver seems to always take care of this. Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback towards finding the best solution to this problem. The following should be a comprehensive list of affected models: iMac13,1 2012 21.5" [Root Port 00:1c.3 = 8086:1e16] iMac13,2 2012 27" [Root Port 00:1c.3 = 8086:1e16] Macmini5,1 2011 i5 2.3 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,2 2011 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini5,3 2011 i7 2.0 GHz [Root Port 00:1c.1 = 8086:1c12] Macmini6,1 2012 i5 2.5 GHz [Root Port 00:1c.1 = 8086:1e12] Macmini6,2 2012 i7 2.3 GHz [Root Port 00:1c.1 = 8086:1e12] MacBookPro8,1 2011 13" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,2 2011 15" [Root Port 00:1c.1 = 8086:1c12] MacBookPro8,3 2011 17" [Root Port 00:1c.1 = 8086:1c12] MacBookPro9,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro9,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,1 2012 15" [Root Port 00:1c.1 = 8086:1e12] MacBookPro10,2 2012 13" [Root Port 00:1c.1 = 8086:1e12] For posterity, spurious interrupts caused by the Broadcom 4331 wireless card resulted in splats like this (stacktrace omitted): irq 17: nobody cared (try booting with the "irqpoll" option) handlers: [<ffffffff81374370>] pcie_isr [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci] [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec] Disabling IRQ #17 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732 Tested-by: Konstantin Simanov <k.simanov@stlk.ru> # [MacBookPro8,1] Tested-by: Lukas Wunner <lukas@wunner.de> # [MacBookPro9,1] Tested-by: Bryan Paradis <bryan.paradis@gmail.com> # [MacBookPro9,2] Tested-by: Andrew Worsley <amworsley@gmail.com> # [MacBookPro10,1] Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2] Signed-off-by:
Lukas Wunner <lukas@wunner.de> Acked-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Matt Fleming <matt@codeblueprint.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Chris Milsted <cmilsted@redhat.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Michael Buesch <m@bues.ch> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: b43-dev@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linux-wireless@vger.kernel.org Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de [ Did minor readability edits. ] Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Lukas Wunner authored
commit 850c3210 upstream. We used to scan secondary buses until the following commit that was applied in 2009: 8659c406 ("x86: only scan the root bus in early PCI quirks") which commit constrained early quirks to the root bus only. Its motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to add a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs, which is located on a secondary bus behind a PCIe root port. To facilitate that, reintroduce scanning of secondary buses. The commit message of 8659c406 notes that scanning only the root bus "saves quite some unnecessary scanning work". The algorithm used prior to 8659c406 was particularly time consuming because it scanned buses 0 to 31 brute force. To avoid lengthening boot time, employ a recursive strategy which only scans buses that are actually reachable from the root bus. Yinghai Lu pointed out that the secondary bus number read from a bridge's config space may be invalid, in particular a value of 0 would cause an infinite loop. The PCI core goes beyond that and recurses to a child bus only if its bus number is greater than the parent bus number (see pci_scan_bridge()). Since the root bus is numbered 0, this implies that secondary buses may not be 0. Do the same on early scanning. If this algorithm is found to significantly impact boot time or cause infinite loops on broken hardware, it would be possible to limit its recursion depth: The Broadcom 4331 quirk applies at depth 1, all others at depth 0, so the bus need not be scanned deeper than that for now. An alternative approach would be to revert to scanning only the root bus, and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12 and 8086:1e16. Apple always positioned the card behind either of these three ports. The quirk would then check presence of the card in slot 0 below the root port and do its deed. Signed-off-by:
-
Lukas Wunner authored
commit 447d29d1 upstream. Since the following commit: 8659c406 ("x86: only scan the root bus in early PCI quirks") ... early quirks are only applied to devices on the root bus. The motivation was to prevent application of the nvidia_bugs quirk on secondary buses. We're about to reintroduce scanning of secondary buses for a quirk to reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent regressions, open code the requirement to apply nvidia_bugs only on the root bus. Signed-off-by:
-
Michał Pecio authored
commit c66f59ee upstream. Since ed_schedule begins with marking the ED as "operational", the ED may be left in such state even if scheduling actually fails. This allows future submission attempts to smuggle this ED to the hardware behind the scheduler's back and without linking it to the ohci->eds_in_use list. The former causes bandwidth saturation and data loss on isoc endpoints, the latter crashes the kernel when attempt is made to unlink such ED from this list. Fix ed_schedule to update ED state only on successful return. Signed-off-by:
Michal Pecio <michal.pecio@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 27 Jul, 2016 27 commits
-
-
Greg Kroah-Hartman authored
-
Miklos Szeredi authored
commit 11f37104 upstream. Unlink and rename in overlayfs checked the upper dentry for staleness by verifying upper->d_parent against upperdir. However the dentry can go stale also by being unhashed, for example. Expand the verification to actually look up the name again (under parent lock) and check if it matches the upper dentry. This matches what the VFS does before passing the dentry to filesytem's unlink/rename methods, which excludes any inconsistency caused by overlayfs. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Mika Kahola authored
commit 34511dce upstream. It has been found out that in some HW combination the DisplayPort fast link training feature caused screen flickering. Let's revert this feature for now until we can ensure that the feature works for all platforms. This is a manual revert of commits 5fa836a9 ("drm/i915: DP link training optimization") and 4e96c977 ("drm/i915: eDP link training optimization"). Fixes: 5fa836a9 ("drm/i915: DP link training optimization") Fixes: 4e96c977 ("drm/i915: eDP link training optimization") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Joakim Tjernlund <joakim.tjernlund@infinera.com> Signed-off-by:
-
Hugh Dickins authored
commit 7f556567 upstream. The well-spotted fallocate undo fix is good in most cases, but not when fallocate failed on the very first page. index 0 then passes lend -1 to shmem_undo_range(), and that has two bad effects: (a) that it will undo every fallocation throughout the file, unrestricted by the current range; but more importantly (b) it can cause the undo to hang, because lend -1 is treated as truncation, which makes it keep on retrying until every page has gone, but those already fully instantiated will never go away. Big thank you to xfstests generic/269 which demonstrates this. Fixes: b9b4bb26 ("tmpfs: don't undo fallocate past its last page") Signed-off-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
-
Anthony Romano authored
commit b9b4bb26 upstream. When fallocate is interrupted it will undo a range that extends one byte past its range of allocated pages. This can corrupt an in-use page by zeroing out its first byte. Instead, undo using the inclusive byte range. Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure") Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by:
Anthony Romano <anthony.romano@coreos.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Brandon Philips <brandon@ifup.co> Signed-off-by:
-
Jan Stancek authored
commit 81dc0365 upstream. Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Signed-off-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Jan Beulich authored
commit 6f2d9d99 upstream. As of Xen 4.7 PV CPUID doesn't expose either of CPUID[1].ECX[7] and CPUID[0x80000007].EDX[7] anymore, causing the driver to fail to load on both Intel and AMD systems. Doing any kind of hardware capability checks in the driver as a prerequisite was wrong anyway: With the hypervisor being in charge, all such checking should be done by it. If ACPI data gets uploaded despite some missing capability, the hypervisor is free to ignore part or all of that data. Ditch the entire check_prereq() function, and do the only valid check (xen_initial_domain()) in the caller in its place. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Steve French authored
commit 45e8a258 upstream. POSIX allows files with trailing spaces or a trailing period but SMB3 does not, so convert these using the normal Services For Mac mapping as we do for other reserved characters such as : < > | ? * This is similar to what Macs do for the same problem over SMB3. Signed-off-by:
Steve French <steve.french@primarydata.com> Acked-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Jerome Marchand authored
commit b8da344b upstream. In sess_auth_rawntlmssp_authenticate(), the ntlmssp blob is allocated statically and its size is an "empirical" 5*sizeof(struct _AUTHENTICATE_MESSAGE) (320B on x86_64). I don't know where this value comes from or if it was ever appropriate, but it is currently insufficient: the user and domain name in UTF16 could take 1kB by themselves. Because of that, build_ntlmssp_auth_blob() might corrupt memory (out-of-bounds write). The size of ntlmssp_blob in SMB2_sess_setup() is too small too (sizeof(struct _NEGOTIATE_MESSAGE) + 500). This patch allocates the blob dynamically in build_ntlmssp_auth_blob(). Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Steve French authored
commit 4fcd1813 upstream. Azure server blocks clients that open a socket and don't do anything on it. In our reconnect scenarios, we can reconnect the tcp session and detect the socket is available but we defer the negprot and SMB3 session setup and tree connect reconnection until the next i/o is requested, but this looks suspicous to some servers who expect SMB3 negprog and session setup soon after a socket is created. In the echo thread, reconnect SMB3 sessions and tree connections that are disconnected. A later patch will replay persistent (and resilient) handle opens. Signed-off-by:
-
James Bottomley authored
commit 8beb3300 upstream. The untagged command case in the 53c700 driver has been broken since host wide tags were enabled because the replaced scsi_find_tag() function had a special case for the tag value SCSI_NO_TAG to retrieve sdev->current_cmnd. The replacement function scsi_host_find_tag() has no such special case and returns NULL causing untagged commands to trigger a BUG() in the driver. Inspection shows that the 53c700 is the only driver using this SCSI_NO_TAG case, so a local fix in the driver suffices to fix this problem globally. Fixes: 64d513ac - "scsi: use host wide tags by default" Reported-by:
Helge Deller <deller@gmx.de> Tested-by:
James Bottomley <jejb@linux.vnet.ibm.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Ewan D. Milne <emilne@redhat.com> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Martin Schwidefsky authored
commit bcf4dd5f upstream. The test_fp_ctl function is used to test if a given value is a valid floating-point control. The inline assembly in test_fp_ctl uses an incorrect constraint for the 'orig_fpc' variable. If the compiler chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl() function always returns true. This allows user space to trigger kernel oopses with invalid floating-point control values on the signal stack. This problem has been introduced with git commit 4725c860 "s390: fix save and restore of the floating-point-control register" Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Wei Fang authored
commit 72d8c36e upstream. sas_ata_strategy_handler() adds the works of the ata error handler to system_unbound_wq. This workqueue asynchronously runs work items, so the ata error handler will be performed concurrently on different CPUs. In this case, ->host_failed will be decreased simultaneously in scsi_eh_finish_cmd() on different CPUs, and become abnormal. It will lead to permanently inequality between ->host_failed and ->host_busy, and scsi error handler thread won't start running. IO errors after that won't be handled. Since all scmds must have been handled in the strategy handler, just remove the decrement in scsi_eh_finish_cmd() and zero ->host_busy after the strategy handler to fix this race. Fixes: 50824d6c ("[SCSI] libsas: async ata-eh") Signed-off-by:
Wei Fang <fangwei1@huawei.com> Reviewed-by:
-
Maxim Patlasov authored
commit cfc9fde0 upstream. The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f37104 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by:
Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by:
-
Vivek Goyal authored
commit 07a2daab upstream. Right now when a new overlay inode is created, we initialize overlay inode's ->i_mode from underlying inode ->i_mode but we retain only file type bits (S_IFMT) and discard permission bits. This patch changes it and retains permission bits too. This should allow overlay to do permission checks on overlay inode itself in task context. [SzM] It also fixes clearing suid/sgid bits on write. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Reported-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
commit c5379ba8 upstream. Until now, our understanding for HW I/O coherency to work on the Cortex-A9 based Marvell SoC was that only the PCIe regions should be mapped strongly-ordered. However, we were still encountering some deadlocks, especially when testing the CESA crypto engine. After checking with the HW designers, it was concluded that all the MMIO registers should be mapped as strongly ordered for the HW I/O coherency mechanism to work properly. This fixes some easy to reproduce deadlocks with the CESA crypto engine driver (dmcrypt on a sufficiently large disk partition). Tested-by:
Terry Stockert <stockert@inkblotadmirer.me> Tested-by:
Romain Perier <romain.perier@free-electrons.com> Cc: Terry Stockert <stockert@inkblotadmirer.me> Cc: Romain Perier <romain.perier@free-electrons.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
commit 929e604e upstream. When the support for the Marvell crypto engine was added in the Device Tree of the various Armada 385 Device Tree files in commit d716f2e8 ("ARM: mvebu: define crypto SRAM ranges for all armada-38x boards"), a typo was made in the MBus window attributes for the Armada 385 Linksys board: 0x09/0x05 are used instead of 0x19/0x15. This commit fixes this typo, which makes the CESA engines operational on Armada 385 Linksys boards. Reported-by:
-
Boris Brezillon authored
commit 5fc39d34 upstream. The sun4i-timer driver registers its sched_clock only if the machine is compatible with "allwinner,sun5i-a13", "allwinner,sun5i-a10s" or "allwinner,sun4i-a10". Add the missing "allwinner,sun5i-a13" string to the machine compatible. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 465a225f ("ARM: sun5i: Add C.H.I.P DTS") Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Awais Belal authored
commit d716fb03 upstream. This allows the device to correctly show up as ATI HDMI rather than a generic one and allows the driver to use the available caps. Signed-off-by:
Awais Belal <awais_belal@mentor.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Peter Wu authored
commit ab58d8cc upstream. register_vga_switcheroo() sets the PM ops from the hda structure which is freed later in azx_free. Make sure that these ops are cleared. Caught by KASAN, initially noticed due to a general protection fault. Fixes: 246efa4a ("snd/hda: add runtime suspend/resume on optimus support (v4)") Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Takashi Iwai authored
commit f388cdcd upstream. snd_ctl_remove() has a notification for the removal event. It's superfluous when done during the device got disconnected. Although the notification itself is mostly harmless, it may potentially be harmful, and should be suppressed. Actually some components PCM may free ctl elements during the disconnect or free callbacks, thus it's no theoretical issue. This patch adds the check of card->shutdown flag for avoiding unnecessary notifications after (or during) the disconnect. Signed-off-by:
-
Takashi Iwai authored
commit a8ff48cb upstream. The chmap ctls assigned to PCM streams are freed in the PCM disconnect callback. However, since the disconnect callback isn't called when the card gets freed before registering, the chmap ctls may still be left assigned. They are eventually freed together with other ctls, but it may cause an Oops at pcm_chmap_ctl_private_free(), as the function refers to the assigned PCM stream, while the PCM objects have been already freed beforehand. The fix is to free the chmap ctls also at PCM free callback, not only at PCM disconnect. Reported-by:
Laxminath Kasam <b_lkasam@codeaurora.org> Signed-off-by:
-
Hui Wang authored
commit 8a132099 upstream. We have some Dell laptops which can't detect headset mic, the machines use the codec ALC225, they have some new pin configuration values, after adding them in the alc225 pin quirk table, they work well. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Bob Copeland authored
commit 81e43960 upstream. UBSAN reports the following warning from accessing path->path[-1] in set_path_power(): [ 16.078040] ================================================================================ [ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17 [ 16.078198] index -1 is out of range for type 'hda_nid_t [10]' [ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47 [ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012 [ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032 [ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d [ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292 [ 16.078302] Call Trace: [ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3 [ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40 [ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70 [ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic] [ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic] [ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic] [ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic] [ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic] [ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0 [ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek] [ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek] [ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec] [ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380 [ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100 [ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380 [ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0 [ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50 [ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0 [ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000 [ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130 [ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec] [ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek] [ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0 [ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80 [ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560 [ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273 [ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273 [ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410 [ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210 [ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0 [ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0 [ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10 [ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd [ 16.078556] ================================================================================ Fix by checking path->depth before use. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Vinod Koul authored
commit 6858107e upstream. Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this earlier with other KBL IDs. Signed-off-by:
-
Torsten Hilbrich authored
commit 9cd25743 upstream. This solves the issue that a headphone is not working on the docking unit. Signed-off-by:
-
Takashi Iwai authored
commit 3fa6993f upstream. The user timer tu->qused counter may go to a negative value when multiple concurrent reads are performed since both the check and the decrement of tu->qused are done in two individual locked contexts. This results in bogus read outs, and the endless loop in the user-space side. The fix is to move the decrement of the tu->qused counter into the same spinlock context as the zero-check of the counter. Signed-off-by:
-
