- 16 Aug, 2021 5 commits
-
-
Kevin Wang authored
the following message is allowed in sriov mode: 1. GetEnabledSmuFeaturesLow 2. GetEnabledSmuFeaturesHigh Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kevin Wang authored
v1: 1. change return value to avoid smu driver probe fails when FEATURE_PPT is not enabled. 2. if FEATURE_PPT is not enabled, set power limit value to 0. v2: instead dev_err with dev_warn Signed-off-by:
-
Kevin Wang authored
v1: 1. skip to load smu firmware in sriov mode for aldebaran chip 2. using vbios pptable if in sriov mode. v2: clean up smu driver code in sriov code path Signed-off-by:
-
Kevin Wang authored
the following feature is wrong, it will cause sysnode of pp_features show error: 1. DPM_XGMI 2. VCN_DPM Signed-off-by:
-
Jack Zhang authored
Why: Previously hw fence is alloced separately with job. It caused historical lifetime issues and corner cases. The ideal situation is to take fence to manage both job and fence's lifetime, and simplify the design of gpu-scheduler. How: We propose to embed hw_fence into amdgpu_job. 1. We cover the normal job submission by this method. 2. For ib_test, and submit without a parent job keep the legacy way to create a hw fence separately. v2: use AMDGPU_FENCE_FLAG_EMBED_IN_JOB_BIT to show that the fence is embedded in a job. v3: remove redundant variable ring in amdgpu_job v4: add tdr sequence support for this feature. Add a job_run_counter to indicate whether this job is a resubmit job. v5 add missing handling in amdgpu_fence_enable_signaling Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Signed-off-by:
Jack Zhang <Jack.Zhang7@hotmail.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed by: Monk Liu <monk.liu@amd.com> Signed-off-by:
-
- 11 Aug, 2021 6 commits
-
-
Tuo Li authored
The variable dc->clk_mgr is checked in: if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock) This indicates dc->clk_mgr can be NULL. However, it is dereferenced in: if (!dc->clk_mgr->funcs->get_clock) To fix this null-pointer dereference, check dc->clk_mgr and the function pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them is NULL. Reported-by:TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Tuo Li <islituo@gmail.com> Signed-off-by:
-
Tuo Li authored
gpu: drm: amd: amdgpu: amdgpu_i2c: fix possible uninitialized-variable access in amdgpu_i2c_router_select_ddc_port() The variable val is declared without initialization, and its address is passed to amdgpu_i2c_get_byte(). In this function, the value of val is accessed in: DRM_DEBUG("i2c 0x%02x 0x%02x read failed\n", addr, *val); Also, when amdgpu_i2c_get_byte() returns, val may remain uninitialized, but it is accessed in: val &= ~amdgpu_connector->router.ddc_mux_control_pin; To fix this possible uninitialized-variable access, initialize val to 0 in amdgpu_i2c_router_select_ddc_port(). Reported-by: -
Mukul Joshi authored
This patch adds support to program trap handler settings when loading driver with software scheduler (sched_policy=2). Signed-off-by:
Mukul Joshi <mukul.joshi@amd.com> Suggested-by:
Jay Cornwall <Jay.Cornwall@amd.com> Reviewed-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by:
-
Philip Yang authored
For xnack on, if range ACCESS or ACCESS_IN_PLACE (AIP) by single GPU, or range is ACCESS_IN_PLACE by mGPUs and all mGPUs connection on XGMI same hive, the best prefetch location is prefetch_loc GPU. Otherwise, the best prefetch location is always CPU because GPU does not have coherent mapping VRAM of other GPUs even with large-BAR PCIe connection. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Ryan Taylor authored
Attempt od settings restore and disable restore flag on restore fan mode failure. v2: Update fan mode to auto and fan speed to zero (Lijo) Reviewed-by:
Ryan Taylor <Ryan.Taylor@amd.com> Signed-off-by:
-
Ryan Taylor authored
Adds missing edge case to smu_restore_dpm_user_profile. v2: Don't restore fan mode auto (Lijo) Reviewed-by:
-
- 10 Aug, 2021 8 commits
-
-
Darren Powell authored
replacing printfs with sysfs_emit === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pwm1_enable pwm1_min pwm1_max pwm1 fan1_input fan1_target fan1_enable power1_cap_min " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by:Darren Powell <darren.powell@amd.com> Reviewed-by:
-
Darren Powell authored
replacing printfs with sysfs_emit minor smu7 change to remove compiler warning comparison of int and uint32_t minor smu8 change to remove compiler warning comparison of int and uint32_t === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Darren Powell authored
=== Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_features pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Darren Powell authored
initial modification of files vega10_hwmgr.c === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_features pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Darren Powell authored
initial modification of files renoir_ppt.c aldebaran_ppt.c yellow_carp_ppt.c === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Darren Powell authored
modification of smu11 files arcturus_ppt.c sienna_cichlid_ppt.c vangogh_ppt.c === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Darren Powell authored
initial modification of files smu_cmn.c navi10_ppt.c === Test === AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1` AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | awk '{print $9}'` HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON} LOGFILE=pp_printf.test.log lspci -nn | grep "VGA\|Display" > $LOGFILE FILES="pp_dpm_sclk pp_sclk_od pp_mclk_od pp_dpm_pcie pp_od_clk_voltage pp_power_profile_mode " for f in $FILES do echo === $f === >> $LOGFILE cat $HWMON_DIR/device/$f >> $LOGFILE done cat $LOGFILE Signed-off-by: -
Alex Deucher authored
There may be multiple instances and only one is harvested. v2: fix typo in commit message Fixes: 83a0b863 ("drm/amdgpu: add judgement when add ip blocks (v2)") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1673Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
-
- 09 Aug, 2021 18 commits
-
-
Sergio Miguéns Iglesias authored
There was an "if" statement that did nothing so it was removed. Signed-off-by:
Sergio Miguéns Iglesias <sergio@lony.xyz> Signed-off-by:
-
Randy Dunlap authored
Don't use "begin kernel-doc notation" (/**) for comments that are not kernel-doc. This eliminates warnings reported by the 0day bot. drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:89: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * This shader is used to clear VGPRS and LDS, and also write the input drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:209: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * The below shaders are used to clear SGPRS, and also write the input drivers/gpu/drm/amd/amdgpu/gfx_v9_4_2.c:301: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * This shader is used to clear the uninitiated sgprs after the above Fixes: 0e0036c7 ("drm/amdgpu: fix no full coverage issue for gprs initialization") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Dennis Li <Dennis.Li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Randy Dunlap authored
Building with W=1 complains about an empty 'else' statement, so use the usual do-nothing-while-0 loop to quieten this warning. ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 113 | *state, retry_count); Fixes: b30eda8d ("drm/amd/display: Add ETW log to dmub_psr_get_state") Signed-off-by:
-
Anson Jacob authored
Replace GFP_KERNEL with GFP_ATOMIC as amdgpu_dm_irq_schedule_work can't sleep. BUG: sleeping function called from invalid context at include/linux/sched/mm.h:196 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 253, name: kworker/6:1H CPU: 6 PID: 253 Comm: kworker/6:1H Tainted: G W OE 5.11.0-promotion_2021_06_07-18_36_28_prelim_revert_retrain #8 Hardware name: System manufacturer System Product Name/PRIME X570-PRO, BIOS 3405 02/01/2021 Workqueue: events_highpri dm_irq_work_func [amdgpu] Call Trace: <IRQ> dump_stack+0x5e/0x74 ___might_sleep.cold+0x87/0x98 __might_sleep+0x4b/0x80 kmem_cache_alloc_trace+0x390/0x4f0 amdgpu_dm_irq_handler+0x171/0x230 [amdgpu] amdgpu_irq_dispatch+0xc0/0x1e0 [amdgpu] amdgpu_ih_process+0x81/0x100 [amdgpu] amdgpu_irq_handler+0x26/0xa0 [amdgpu] __handle_irq_event_percpu+0x49/0x190 ? __hrtimer_get_next_event+0x4d/0x80 handle_irq_event_percpu+0x33/0x80 handle_irq_event+0x33/0x60 handle_edge_irq+0x82/0x190 asm_call_irq_on_stack+0x12/0x20 </IRQ> common_interrupt+0xbb/0x140 asm_common_interrupt+0x1e/0x40 RIP: 0010:amdgpu_device_rreg.part.0+0x44/0xf0 [amdgpu] Code: 53 48 89 fb 4c 3b af c8 08 00 00 73 6d 83 e2 02 75 0d f6 87 40 62 01 00 10 0f 85 83 00 00 00 4c 03 ab d0 08 00 00 45 8b 6d 00 <8b> 05 3e b6 52 00 85 c0 7e 62 48 8b 43 08 0f b7 70 3e 65 8b 05 e3 RSP: 0018:ffffae7740fff9e8 EFLAGS: 00000286 RAX: ffffffffc05ee610 RBX: ffff8aaf8f620000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000005430 RDI: ffff8aaf8f620000 RBP: ffffae7740fffa08 R08: 0000000000000001 R09: 000000000000000a R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000005430 R13: 0000000071000000 R14: 0000000000000001 R15: 0000000000005430 ? amdgpu_cgs_write_register+0x20/0x20 [amdgpu] amdgpu_device_rreg+0x17/0x20 [amdgpu] amdgpu_cgs_read_register+0x14/0x20 [amdgpu] dm_read_reg_func+0x38/0xb0 [amdgpu] generic_reg_wait+0x80/0x160 [amdgpu] dce_aux_transfer_raw+0x324/0x7c0 [amdgpu] dc_link_aux_transfer_raw+0x43/0x50 [amdgpu] dm_dp_aux_transfer+0x87/0x110 [amdgpu] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper] drm_dp_get_one_sb_msg+0x349/0x480 [drm_kms_helper] drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] ? drm_dp_mst_hpd_irq+0xc5/0xe40 [drm_kms_helper] dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] ? dm_handle_hpd_rx_irq+0x184/0x1a0 [amdgpu] handle_hpd_rx_irq+0x195/0x240 [amdgpu] ? __switch_to_asm+0x42/0x70 ? __switch_to+0x131/0x450 dm_irq_work_func+0x19/0x20 [amdgpu] process_one_work+0x209/0x400 worker_thread+0x4d/0x3e0 ? cancel_delayed_work+0xa0/0xa0 kthread+0x124/0x160 ? kthread_park+0x90/0x90 ret_from_fork+0x22/0x30 Reviewed-by:
Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by:
Anson Jacob <Anson.Jacob@amd.com> Signed-off-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] If we're backdoor loading the DMCUB performs more work than just the PHY reset so we can end up resetting before the cleanup has fully finished. [How] Increase timeout, add udelay between spins to guarantee a minimum. Reviewed-by:
Roy Chan <roy.chan@amd.com> Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Nicholas Kazlauskas authored
[Why] Otherwise we can end up processing whatever was left in the register if the DMCUB was previously reset. If DMCUB gets force reset too early from another client then we might not have even acked the disable yet - causing DMCUB instantly shutdown if the command was 10020000. [How] Move the GPINT clear outside of the reset loop and do it unconditionally after the DMCUB has been properly reset. Reviewed-by:
-
Anthony Koo authored
This version brings along following fixes: - Fix memory allocation in dm IRQ context to use GFP_ATOMIC - Increase timeout threshold for DMCUB reset - Clear GPINT after DMCUB has reset - Add AUX I2C tracing - Fix code commenting style - Some refactoring - Remove invalid assert for ODM + MPC case Reviewed-by:
Wyatt Wood <Wyatt.Wood@amd.com> Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Tested-by:
-
Anthony Koo authored
Acked-by:
-
Wenjing Liu authored
[why] DM needs to be notified when hdcp module has completed authentication attempt. Reviewed-by:
Bhawanpreet Lakha <bhawanpreet.lakha@amd.com> Reviewed-by:
George Shen <George.Shen@amd.com> Acked-by:
Wenjing Liu <wenjing.liu@amd.com> Tested-by:
-
Ashley Thomas authored
[Why] Developers can find it useful if the driver can produce AUX traces without special equipment. [How] Add AUX tracing. Reviewed-by:
Zhan Liu <zhan.liu@amd.com> Acked-by:
Ashley Thomas <Ashley.Thomas2@amd.com> Tested-by:
-
Roy Chan authored
Acked-by:
-
Roy Chan authored
[How] the programming sequeune was for old asic. the correct programming sequeunce should be similar to the one used in mpc. the fix is copied from the mpc programming sequeunce. Reviewed-by:
-
Roy Chan authored
Acked-by:
-
Roy Chan authored
Acked-by:
-
Roy Chan authored
[Why] If the plane has been removed, the writeback disablement logic doesn't run [How] fix the logic order Acked-by:
-
Eric Bernstein authored
Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Eric Bernstein <eric.bernstein@amd.com> Cc: stable@vger.kernel.org Tested-by:
-
YuBiao Wang authored
When init failed in early init stage, amdgpu_object has not been initialized, so hasn't the ttm delayed queue functions. Signed-off-by:
YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by:
Emily.Deng <Emily.Deng@amd.com> Signed-off-by:
-
Victor Zhao authored
- Extend wait time and add retry, currently 6s * 2times - Change timing algorithm Signed-off-by:
Victor Zhao <Victor.Zhao@amd.com> Signed-off-by:
Peng Ju Zhou <PengJu.Zhou@amd.com> Signed-off-by:
-
- 06 Aug, 2021 3 commits
-
-
Felix Kuehling authored
Currently the SVM get_attr call allows querying, which flags are set in the entire address range. Add the opposite query, which flags are clear in the entire address range. Both queries can be combined in a single get_attr call, which allows answering questions such as, "is this address range coherent, non-coherent, or a mix of both"? Proposed userspace for UAPI: https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queriesSigned-off-by:
-
Colin Ian King authored
The variable eng_id is being initialized with a value that is never read, it is being re-assigned on the next statment. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Dan Carpenter authored
Check whether the kcalloc() fails and return -ENOMEM if it does. Fixes: 84ec374b ("drm/amdgpu: create amdgpu_vkms (v4)") Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
