- 05 Feb, 2013 40 commits
-
-
Sachin Kamat authored
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
This patch fixes regression introduced in commit 6319d6a002beb26631 '[media] fimc-lite: Add ISP FIFO output support'. In case of a configuration where video is captured at the video node exposed by the FIMC-LITE driver there is a following video pipeline: sensor -> MIPI-CSIS.n -> FIMC-LITE.n subdev -> FIMC-LITE.n video node In this situation s_stream() handler of the FIMC-LITE.n is called back from within VIDIOC_STREAMON/OFF ioctl of the FIMC-LITE.n video node, through vb2_stream_on/off(), start/stop_streaming and fimc_pipeline_call(set_stream). The fimc->lock mutex is already held then, before invoking vidioc_streamon/off. So it must not be taken again in the s_stream() callback in this case, to avoid a deadlock. This patch makes fimc->out_path atomic_t so the mutex don't need to be taken in the FIMC-LITE subdev s_stream() callback in the DMA output case. Signed-off-by:
Kyugmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The .s_power FIMC-LITE subdev callback is now empty and unneeded. The FIMC-LITE IP power handling will be done by the FIMC-IS driver, so just remove the callback. Signed-off-by:
-
Andrzej Hajda authored
Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Arun Kumar K authored
Cleaned up the memory devices allocation code and added missing device_initialize() call to remove the kernel warning during memory allocations. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Use WARN_ON(condition) directly instead of wrapping around an if condition. Signed-off-by:
-
Sachin Kamat authored
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by:
-
Sylwester Nawrocki authored
All host drivers using this subdev driver are already converted to use the control framework so the compatibility ops can be dropped. Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Sachin Kamat authored
Modified the G2D driver (which initially supported only H/W Rev.3) to support H/W Rev.4.1 present on Exynos4x12 and Exynos52x0 SOCs. - Set the SRC and DST type to 'memory' instead of using reset values. - FIMG2D v4.1 H/W uses different logic for stretching(scaling). - Use CACHECTL_REG only with FIMG2D v3. [s.nawrocki: removed empty line at end of file]] Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the following warning: drivers/media/platform/s5p-mfc/s5p_mfc_opr.c:56:27: warning: Using plain integer as NULL pointer Signed-off-by:
-
Sylwester Nawrocki authored
Make sure bytesperline for Cb, Cr planes for V4L2_PIX_FMT_YUV420M format is half of the Y plane value, rather than having same bytesperline for all planes. While at it, simplify the bytesperline parameter handling by storing it when image format is set and returning those values when getting the format, instead of recalculating bytesperline from intermediate parameters. Reported-by:
Sebastian Dröge <sebastian.droege@collabora.co.uk> Signed-off-by:
-
Kamil Debski authored
Fixed wrong condition in firmware reload function used by the watchdog. Signed-off-by:
-
Hans Verkuil authored
Fixes a v4l2-compliance error: setting audmode to a value other than mono or stereo for a radio device should map to MODE_STEREO. The spec specifies that for radio devices only mono and stereo audmodes are valid. If the user specifies another audmode in v4l2_tuner, then that should be mapped to valid audmode. That didn't happen here. Note that tuner drivers might decide to limit the possible audmode even further if it only supports mono. In that case the tuner driver can set audmode to mono. However, that new value wasn't copied back to t->audmode, and that has been fixed as well in this patch. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a v4l2 core helper function that can be used as the log_status handler for subdevs that only need to log state of the v4l2 controls owned by the subdev's control handler. Signed-off-by:
-
Sylwester Nawrocki authored
Add a v4l2 core helper function that can be used as the subdev .subscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by:
-
Sylwester Nawrocki authored
Add a v4l2 core helper function that can be used as the subdev .unsubscribe_event handler. This allows to eliminate some boilerplate from drivers that are only handling the control events. Signed-off-by:
-
Sylwester Nawrocki authored
This patch adds a helper function that allows to modify range, i.e. minimum, maximum, step and default value of a v4l2 control, after the control has been created and initialized. This is helpful in situations when range of a control depends on user configurable parameters, e.g. camera sensor absolute exposure time depending on an output image resolution and frame rate. v4l2_ctrl_modify_range() function allows to modify range of an INTEGER, BOOL, MENU, INTEGER_MENU and BITMASK type controls. Based on a patch from Hans Verkuil http://patchwork.linuxtv.org/patch/8654. Signed-off-by:
-
Sylwester Nawrocki authored
Add common header file defining standard image sizes, so we can avoid redefining those in each driver. Signed-off-by:
-
Hans de Goede authored
Instead chaneg the passed in format to the pwc default pixelformat. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by:Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Also replaced: #if !defined CONFIG_USB_SN9C102 && !defined CONFIG_USB_SN9C102_MODULE with: #if !IS_ENABLED(CONFIG_USB_SN9C102) Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_INPUT) || \ defined(CONFIG_INPUT_MODULE) with: #if IS_ENABLED(CONFIG_INPUT) This change was made for: CONFIG_INPUT Reported-by: -
Peter Senna Tschudin authored
replace: #if defined(CONFIG_USB_SI470X) || \ defined(CONFIG_USB_SI470X_MODULE) with: #if IS_ENABLED(CONFIG_USB_SI470X) This change was made for: CONFIG_USB_SI470X, CONFIG_I2C_SI470X Reported-by: -
Johannes Schellen authored
This patch fixes a bug which causes all histogram regions to start in the top left corner of the image. The histogram region coordinates are 16 bit values which share a 32 bit register. The bug is due to the region end value assignments overwriting the region start values with zero. Signed-off-by:
Johannes Schellen <Johannes.Schellen@rwth-aachen.de> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Replace kzalloc, request_mem_region, ioremap, clk_get and regulator_get with their devm_* managed replacement. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
kzalloc initializes the memory it allocates to 0, there's no need for an explicit memset. Signed-off-by:
-
