Don't populate the read-only array EWC11NHTCap on the stack but instead
make it static const. Also makes the object code a little smaller.
Remove comment.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220414103650.297396-1-colin.i.king@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added tabs for indent to fix the checkpatch error.
Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com>
Link: https://lore.kernel.org/r/20220413204648.60358-1-aliyarahmani786@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove redundant parentheses reported by checkpatch.
Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com>
Link: https://lore.kernel.org/r/20220413182303.34807-1-aliyarahmani786@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the unnecessary space immediately after a cast. Identified by
checkpatch: CHECK: No space is necessary after a cast.
Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com>
Link: https://lore.kernel.org/r/20220413113531.31224-1-aliyarahmani786@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pkg_newalloc in struct recv_buf is not used. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413200742.276806-5-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use structs and functions from ieee80211.h in mgt_dispatcher to parse
the incoming frame.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413200742.276806-4-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All that the _mgt_dispatcher function does is to call a function from
a function pointer. It's not worth having a separate function for this.

Merge _mgt_dispatcher into mgt_dispatcher.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413200742.276806-3-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace the driver-specific GetPriority macro with ieee80211_get_tid,
which does exactly the same thing.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413200742.276806-2-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_get_passing_time_ms and rtw_systime_to_ms are not used any more.
Remove them.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-9-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the loop in rtw_pwr_wakeup that waits while the system is
suspended.

pwrpriv->bInSuspend is set in rtw_suspend and cleared in rtw_resume. These
functions are the .suspend and .resume functions of the struct usb_driver
for r8188eu.

A usb_driver's suspend and resume functions are called when the entire
system goes into suspend or runtime suspend.

All of the code paths for rtw_pwr_wakeup start at ioctl handlers.

We can remove the loop that checks bInSuspend. It's not possible to call
an ioctl while the entire system is suspended.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-8-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the code in rtw_pwr_wakeup that sets pwrpriv->ips_deny_time.

Make ips_deny_time an unsigned long, this type is used by the kernel
functions that process jiffies.

Remove the temporary variable ips_deffer_ms and use
RTW_PWR_STATE_CHK_INTERVAL directly.

There's no need to set ips_deny_time twice, it's sufficient to set it at
the end of rtw_pwr_wakeup.

Use time_before to check if ips_deny_time should be updated.

We can now remove rtw_ms_to_systime, this function is not used any more.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-7-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the kernel functions to set a timeout and to check if it's expired.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-6-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Summarize two if statements in rtw_pwr_wakeup and place the constants
on the right side of the comparison.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-5-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's sufficient to check pwrpriv->ps_processing as part of the while-loop.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-4-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_pwr_wakeup should return _SUCCESS or _FAIL.

Replace false with _FAIL in one place and reformat the if-statement.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-3-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Simplify the conditions for a loop in rtw_pwr_wakeup that waits while
the system is suspended.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220413193654.258507-2-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Store the address and the data pointer for calls to rtw_writeN() and
rtw_write8() in local variables. This avoids long lines and improves
readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-7-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variables i and offset in block_write() are set in the code
before they are used. Remove the unneeded initializations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-6-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For cleaner code and improved readability we can reduce the number
of local variables in block_write(). Use a single variable for block
size, number of blocks and remaining size.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-5-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The second parameter of write_fw(), page_write() and block_write()
is a void pointer, but we always pass an u8 pointer. We can convert
this parameter to an u8 pointer. The pointer is not changed in the
functions, so we can safely remove the local variable bufferPtr.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-4-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename the parameter buffSize of block_write() to avoid camel case.

buffSize -> size
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct a macro spelling mistake in rtw_fw.c.

MAX_REG_BOLCK_SIZE -> MAX_REG_BLOCK_SIZE
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | rtw_join_timeout_handler()
                             |  _rtw_join_timeout_handler()
 del_timer_sync()            |   spin_lock_bh() //(2)
 (wait timer to stop)        |   ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409072135.74248-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:

   (Thread 1)                |      (Thread 2)
                             | _set_timer()
rtw_joinbss_event_prehandle()|  mod_timer()
 spin_lock_bh() //(1)        |  (wait a time)
 ...                         | _rtw_join_timeout_handler()
 del_timer_sync()            |  spin_lock_bh() //(2)
 (wait timer to stop)        |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:

   (Thread 1)                  |      (Thread 2)
                               | _set_timer()
rtw_surveydone_event_callback()|  mod_timer()
 spin_lock_bh() //(1)          |  (wait a time)
 ...                           | rtw_scan_timeout_handler()
 del_timer_sync()              |  spin_lock_bh() //(2)
 (wait timer to stop)          |  ...

We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.

This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409061836.60529-1-duoming@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Adhere to linux coding style.

Reported by checkpatch:

spaces preferred around that '{operator}'.
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413054517.6343-1-mahak_g@cs.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the optional remove callback for the soc_codec_dev_gbaudio
structure. The only place it is referenced is
snd_soc_component_remove() which is only called if the sound_component
pointer is non-null. The null function pointers here can be optionally
ommitted. When a sound component is registered this way, the remove
callback is optional. We can safely remove the whole gbcodec_remove
function, which used to be an empty function with a void return type.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/12037ae2502ad7d0311bcdf2178c3d2156293236.1649824370.git.jhpark1013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct a spelling typo from 'Atleast' to 'At least' in comment.
Issue found by checkpatch.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/2feb03de97ca4dbd27c22cf40f8e185f7dfaae29.1649824370.git.jhpark1013@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Else is not necessary after return and break statements, hence remove
it.

Reported by checkpatch:

WARNING: else is not generally useful after a break or return
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413052759.4859-1-mahak_g@cs.iitr.ac.inSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove compat ALSA card, which has overlapping functionality with the
two other cards described by the driver (HDMI and headphones)

This handles TODO item "Revisit multi-cards options and PCM route mixer
control".

Move the S/PDIF device that was part of the compat ALSA card to the HDMI
card.

Only enable headphones card by default, because HDMI breaks when using
both vc4 and bcm2835-audio with HDMI card enabled.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220408150359.26661-1-athierry@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

rtllib_sta_ps() and ieee80211_sta_ps() will now run in process context
and have further concurrency (tasklets being serialized among themselves),
but this is done holding the ieee->lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-7-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is unused.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-6-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The execution of the SME event will now occur in task context. There
are, however, changes in concurrency. Workqueues, unlike tasklets,
are not serialized among themselves and can run concurrently
updating sme_i.qhead. However, the current code is already exposed
in same ways, regardless of the deferral mechanism, in that
hostif_sme_enqueue() does unserialized enqueues updating sme_i.qtail.

Also get rid of the bogus (power save) tasklet enabling, as it
is never disabled to begin with.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-5-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The completion_bh tasklet will now run in process context and have
further concurrency (tasklets being serialized among themselves),
but this is done holding the ctlxq.lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-4-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so.

The reaper_bh tasklet will now run in process context and have further
concurrency (tasklets being serialized among themselves), but this
is done holding the ctlxq.lock, so it should be fine.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-3-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tasklets have long been deprecated as being too heavy on the system
by running in irq context - and this is not a performance critical
path. If a higher priority process wants to run, it must wait for
the tasklet to finish before doing so. A more suitable equivalent
is to converted to threaded irq instead and service channels in
regular task context.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20220411151620.129178-2-dave@stgolabs.netSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove do-while(0) and CamelCase macro PCAvDelayByIO as
it is not accepted by checkpatch.pl
As the macro is just used once with a constant <= 50 the
functionality of the macro is implemented by using
udelay() directly.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/e8267e7566d389f318a72d911083e52b02e37210.1649706687.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes checkpatch warnings of precedence issues. Added parentheses
around macro arguments 'offset' and 'word_en'.
Signed-off-by: Aliya Rahmani <aliyarahmani786@gmail.com>
Link: https://lore.kernel.org/r/20220412071456.40980-1-aliyarahmani786@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
efuse_read_phymap_from_txpktbuf.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-10-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the standard kernel functions to define and check the timeout in
iol_execute.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220409163212.241122-9-martin@kaiser.cxSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>