We can now remove CONFIG_MSCHUNKS as it doesn't do anything interesting
anymore.

The only macro in abs_addr.h which is called by non-iSeries code is
phys_to_abs(), so remove the other dummy implementations, and we add a
firmware feature check to phys_to_abs().
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

lmb_phys_mem_size() can always return lmb.memory.size, as long as it's called
after lmb_analyze(), which it is. There's no need to recalculate the size on
every call.

lmb_analyze() was calculating a few things we then threw away, so just don't
calculate them to start with.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

We no longer need the lmb code to know about abs and phys addresses, so
remove the physbase variable from the lmb_property struct.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

abs_to_phys() is a macro that turns out to do nothing, and also has the
unfortunate property that it's not the inverse of phys_to_abs() on iSeries.

The following is for my benefit as much as everyone else.

With CONFIG_MSCHUNKS enabled, the lmb code is changed such that it keeps
a physbase variable for each lmb region. This is used to take the possibly
discontiguous lmb regions and present them as a contiguous address space
beginning from zero.

In this context each lmb region's base address is its "absolute" base
address, and its physbase is it's "physical" address (from Linux's point of
view). The abs_to_phys() macro does the mapping from "absolute" to "physical".

Note: This is not related to the iSeries mapping of physical to absolute
(ie. Hypervisor) addresses which is maintained with the msChunks structure.
And the msChunks structure is not controlled via CONFIG_MSCHUNKS.

Once upon a time you could compile for non-iSeries with CONFIG_MSCHUNKS
enabled. But these days CONFIG_MSCHUNKS depends on CONFIG_PPC_ISERIES, so
for non-iSeries code abs_to_phys() is a no-op.

On iSeries we always have one lmb region which spans from 0 to
systemcfg->physicalMemorySize (arch/ppc64/kernel/iSeries_setup.c line 383).
This region has a base (ie. absolute) address of 0, and a physbase address
of 0 (as calculated in lmb_analyze() (arch/ppc64/kernel/lmb.c line 144)).

On iSeries, abs_to_phys(aa) is defined as lmb_abs_to_phys(aa), which finds
the lmb region containing aa (and there's only one, ie. 0), and then does:

 return lmb.memory.region[0].physbase + (aa - lmb.memory.region[0].base)

physbase == base == 0, so you're left with "return aa".

So remove abs_to_phys(), and lmb_abs_to_phys() which is the implementation
of abs_to_phys() for iSeries.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The lmb code is all written to use a pointer to an lmb struct. But it's always
the same lmb struct, called "lmb". So we take the address of lmb, call it
_lmb and then start using _lmb->foo everywhere, which is silly.

This patch removes the _lmb pointers and replaces them with direct references
to the one "lmb" struct. We do the same for some _mem and _rsv pointers which
point to lmb.memory and lmb.reserved respectively.

This patch looks quite busy, but it's basically just:
s/_lmb->/lmb./g
s/_mem->/lmb.memory./g
s/_rsv->/lmb.reserved./g
s/_rsv/&lmb.reserved/g
s/mem->/lmb.memory./g
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

physRpn_to_absRpn is a no-op on non-iSeries platforms, remove the two
redundant calls.

There's only one caller on iSeries so fold the logic in there so we can get
rid of it completely.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The only caller of chunk_offset() and abs_chunk() is phys_to_abs(), so
fold the former two into the latter.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Rename the msChunks struct to get rid of the StUdlY caps and make it a bit
clearer what it's for.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Chunks are 256KB, so use constants for the size/shift/mask, rather than
getting them from the msChunks struct. The iSeries debugger (??) might still
need access to the values in the msChunks struct, so we keep them around
for now, but set them from the constant values.

Replace msChunks_entry typedef with regular u32.

Simplify msChunks_alloc() to manipulate klimit directly, rather than via
a parameter.

Move msChunks_alloc() and msChunks into iSeries_setup.c, as that's where
they're used.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The msChunks code was written to work on pSeries, but now it's only used on
iSeries. This means there's no need to do PTRRELOC anymore, so remove it all.

A few places were getting "extern reloc_offset()" from abs_addr.h, move it
into system.h instead.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Make firmware_has_feature() evaluate at compile time for the non pSeries
case and tidy up code where possible.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Create the firmware_has_feature() inline and move the firmware feature
stuff into its own header file.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The firmware_features field of struct cpu_spec should really be a separate
variable as the firmware features do not depend on the chip and the
bitmask is constructed independently.  By removing it, we save 112 bytes
from the cpu_specs array and we access the bitmask directly instead of via
the cur_cpu_spec pointer.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The ppc64 head.S defines several zero-initialized structures, such as
the empty_zero_page and the kernel top-level pagetable.  Currently
they are defined to be in the data section.  However, they're not used
until after the bss is cleared, so this patch moves them to the bss,
saving two and a half pages from the vmlinux.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch adjust some comments in head.S for accuracy, clarity, and
spelling.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc64/kernel/head.S #defines SECONDARY_PROCESSORS then has some
#ifdefs based on it.  Whatever purpose this had is long lost, this
patch removes it.

Likewise, head.S defines H_SET_ASR, which is now defined, along with
other hypervisor call numbers in hvcall.h.  This patch deletes it, as
well, from head.S.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

An #if/#else construct near the top of ppc64's head.S appears to
create overlapping sections of code for iSeries and pSeries (i.e. one
thing on iSeries and something different in the same place on
pSeries).  In fact, checking the various absolute offsets, it doesn't.
This patch unravels the #ifdefs to make it more obvious what's going
on.  This accomplishes another microstep towards a single kernel image
which can boot both iSeries and pSeries.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

As well as the interrupt vectors and initialization code, head.S
contains several asm functions which are used during runtime.  This
patch moves these to misc.S, a more sensible location for random asm
support code.  A couple The functions moved are:
	disable_kernel_fp
	giveup_fpu
	disable_kernel_altivec
	giveup_altivec
	__setup_cpu_power3	(empty function)
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

On ppc64 machines with segment tables, CPU0's segment table is at a
fixed address, currently 0x9000.  This patch moves it to the free
space at 0x6000, just below the fwnmi data area.  This saves 8k of
space in vmlinux and the runtime kernel image.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

In the ppc64 kernel head.S there is currently quite a lot of unused
space between the naca (at fixed address 0x4000) and the fwnmi data
area (at fixed address 0x7000).  This patch moves various exception
vectors and support code into this region to use the wasted space.

The functions load_up_fpu and load_up_altivec are moved down as well,
since they are essentially continuations of the fp_unavailable_common
and altivec_unavailable_common vectors, respectively.

Likewise, the fwnmi vectors themselves are moved down into this area,
because while the location of the fwnmi data area is fixed by the RPA,
the vectors themselves can be anywhere sufficiently low.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Comments in head.S suggest that the iSeries naca has a fixed address,
because tools expect to find it there.  The only tool which appears to
access the naca is addRamDisk, but both the in-kernel version and the
version used in RHEL and SuSE in fact locate the NACA the same way as
the hypervisor does, by following the pointer in the hvReleaseData
structure.

Since the requirement for a fixed address seems to be obsolete, this
patch removes the naca from head.S and replaces it with a normal C
initializer.

For good measure, it removes an old version of addRamDisk.c which was
sitting, unused, in the ppc32 tree.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch just splits out the pSeries specific parts of vio.c.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch allows us to have a different bus if matching function for
each platform.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Since the iSeries vio iommu tables cannot be used until after the vio bus has
been initialised, move the initialisation of the tables to there.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch splits the iSeries specific parts out of vio.c.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc64/Kconfig defines a "General setup" menu, but also sources
init/Kconfig which also defines a "General setup" menu.  Both of these
menus appear at the top level of make menuconfig.  Having two menus with
the same name is confusing.  This patch renames the ppc64/Kconfig menu to
be "Bus Options" and moves options in this menu which are not bus related
to the end of the "Platform support" menu.

There are many variations among architectures on the exact naming of the
"Bus Options" menu.  I chose to use the simplest one, which is also used
in arch/ppc/Kconfig.
Signed-off-by: Frank Rowand <frowand@mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

OpenFirmware marks devices as failed in the device-tree when a hardware
problem is detected.  The kernel needs to fail config reads/writes to
prevent a kernel crash when incorrect data is read.

This patch validates that the device-node is not marked "fail" when
config space reads/writes are attempted.
Signed-off-by: Jake Moilanen <moilanen@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This patch updates the format of the flattened device-tree passed
between the boot trampoline and the kernel to support a more compact
representation, for use by embedded systems mostly.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Implement 4-level pagetables for ppc64

This patch implements full four-level page tables for ppc64, thereby
extending the usable user address range to 44 bits (16T).

The patch uses a full page for the tables at the bottom and top level,
and a quarter page for the intermediate levels.  It uses full 64-bit
pointers at every level, thus also increasing the addressable range of
physical memory.  This patch also tweaks the VSID allocation to allow
matching range for user addresses (this halves the number of available
contexts) and adds some #if and BUILD_BUG sanity checks.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Make the bootheader for ppc64 independent from kernel and libc headers.
* add -nostdinc -isystem $gccincludes to not include libc headers
* declare all functions in header files, also the stuff from string.S
* declare some functions static
* use stddef.h to get size_t (hopefully ok)
* remove ppc32-types.h, only elf.h used the __NN types

With further modifications by Paul Mackerras and Stephen Rothwell.
Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Bugfix (usage of uninitialized pointer in zfcp_port_dequeue) and compile
fixes for the zfcp device driver.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

struct zfcp_port::scsi_id was removed by commit
  3859f6a2Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge refs/heads/upstream-fixes from master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 

[ Same race and same patch also by Steven Rostedt <rostedt@goodmis.org> ]

I have a laptop (G3 powerbook) which will pretty reliably hit a race
between con_open and con_close late in the boot process and oops in
vt_ioctl due to tty->driver_data being NULL.

What happens is this: process A opens /dev/tty6; it comes into
con_open() (drivers/char/vt.c) and assign a non-NULL value to
tty->driver_data.  Then process A closes that and concurrently process
B opens /dev/tty6.  Process A gets through con_close() and clears
tty->driver_data, since tty->count == 1.  However, before process A
can decrement tty->count, we switch to process B (e.g. at the
down(&tty_sem) call at drivers/char/tty_io.c line 1626).

So process B gets to run and comes into con_open with tty->count == 2,
as tty->count is incremented (in init_dev) before con_open is called.
Because tty->count != 1, we don't set tty->driver_data.  Then when the
process tries to do anything with that fd, it oopses.

The simple and effective fix for this is to test tty->driver_data
rather than tty->count in con_open.  The testing and setting of
tty->driver_data is serialized with respect to the clearing of
tty->driver_data in con_close by the console_sem.  We can't get a
situation where con_open sees tty->driver_data != NULL and then
con_close on a different fd clears tty->driver_data, because
tty->count is incremented before con_open is called.  Thus this patch
eliminates the race, and in fact with this patch my laptop doesn't
oops.
Signed-off-by: Paul Mackerras <paulus@samba.org>
[ Same patch
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
  in http://marc.theaimsgroup.com/?l=linux-kernel&m=112450820432121&w=2 ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch fixes a severe problem with 2.6.13-rc7.

Due to recent SCSI changes it is not possible to add any LUNs to the zfcp
device driver anymore.  With registration of remote ports this is fixed.
Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com>
Acked-by: James Bottomley <jejb@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I know that scsi procfs is legacy code but this is a fix for a memory leak.

While reading through sg.c I realized that the implementation of
/proc/scsi/sg/devices with seq_file is leaking memory due to freeing the
pointer returned by the next() iterator method.  Since next() might return
NULL or an error this is wrong.  This patch fixes it through using the
seq_files private field for holding the reference to the iterator object.

Here is a small bash script to trigger the leak. Use slabtop to watch
the size-32 usage grow and grow.

#!/bin/sh

while true; do
	cat /proc/scsi/sg/devices > /dev/null
done
Signed-off-by: Jan Blunck <j.blunck@tu-harburg.de>
Acked-by: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixed race between submitting streaming URBs in the driver and starting
the actual transfer in hardware (demodulator and USB controller) which
sometimes lead to garbled data transfers. URBs are now submitted first,
then the transfer is enabled. Dibusb devices and clones are now fully
functional again.
Signed-off-by: Patrick Boettcher <pb@linuxtv.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a bug in the capifs initialization code, where the
filesystem is not unregistered if kern_mount() fails.
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>