When fec_probe() fails or fec_drv_remove() needs to release the
fec queue and remove a NAPI context, therefore add a function
corresponding to fec_enet_init() and call fec_enet_deinit() which
does the opposite to release memory and remove a NAPI context.

Fixes: 59d0f746 ("net: fec: init multi queue date structure")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240524050528.4115581-1-xiaolei.wang@windriver.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints and all the undocumented properties exposed by the fix.

Fixes: f562202f ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.

Fixes: 9c1de033 ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Jason commit made checks against ACK sequence less strict
and can be exploited by attackers to establish spoofed flows
with less probes.

Innocent users might use tcp_rmem[1] == 1,000,000,000,
or something more reasonable.

An attacker can use a regular TCP connection to learn the server
initial tp->rcv_wnd, and use it to optimize the attack.

If we make sure that only the announced window (smaller than 65535)
is used for ACK validation, we force an attacker to use
65537 packets to complete the 3WHS (assuming server ISN is unknown)

Fixes: 378979e9 ("tcp: remove 64 KByte limit for initial tp->rcv_wnd value")
Link: https://datatracker.ietf.org/meeting/119/materials/slides-119-tcpm-ghost-acks-00Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/r/20240523130528.60376-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Syzkaller was able to trigger

    kernel BUG at net/core/gro.c:424 !
    RIP: 0010:gro_pull_from_frag0 net/core/gro.c:424 [inline]
    RIP: 0010:gro_try_pull_from_frag0 net/core/gro.c:446 [inline]
    RIP: 0010:dev_gro_receive+0x242f/0x24b0 net/core/gro.c:571

Due to using an incorrect NAPI_GRO_CB(skb)->network_offset.

The referenced commit sets this offset to 0 in skb_gro_reset_offset.
That matches the expected case in dev_gro_receive:

        pp = INDIRECT_CALL_INET(ptype->callbacks.gro_receive,
                                ipv6_gro_receive, inet_gro_receive,
                                &gro_list->list, skb);

But syzkaller injected an skb with protocol ETH_P_TEB into an ip6gre
device (by writing the IP6GRE encapsulated version to a TAP device).
The result was a first call to eth_gro_receive, and thus an extra
ETH_HLEN in network_offset that should not be there. First issue hit
is when computing offset from network header in ipv6_gro_pull_exthdrs.

Initialize both offsets in the network layer gro_receive.

This pairs with all reads in gro_receive, which use
skb_gro_receive_network_offset().

Fixes: 186b1ea7 ("net: gro: use cb instead of skb->network_header")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240523141434.1752483-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Cited commit started returning an error when user space requests to dump
the interface's IPv4 addresses and IPv4 is disabled on the interface.
Restore the previous behavior and do not return an error.

Before cited commit:

 # ip address show dev dummy1
 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
     link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::e040:68ff:fe98:d018/64 scope link proto kernel_ll
        valid_lft forever preferred_lft forever
 # ip link set dev dummy1 mtu 67
 # ip address show dev dummy1
 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
     link/ether e2:40:68:98:d0:18 brd ff:ff:ff:ff:ff:ff

After cited commit:

 # ip address show dev dummy1
 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
     link/ether 32:2d:69:f2:9c:99 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::302d:69ff:fef2:9c99/64 scope link proto kernel_ll
        valid_lft forever preferred_lft forever
 # ip link set dev dummy1 mtu 67
 # ip address show dev dummy1
 RTNETLINK answers: No such device
 Dump terminated

With this patch:

 # ip address show dev dummy1
 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
     link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff
     inet6 fe80::dc17:56ff:febb:57c0/64 scope link proto kernel_ll
        valid_lft forever preferred_lft forever
 # ip link set dev dummy1 mtu 67
 # ip address show dev dummy1
 10: dummy1: <BROADCAST,NOARP,UP,LOWER_UP> mtu 67 qdisc noqueue state UNKNOWN group default qlen 1000
     link/ether de:17:56:bb:57:c0 brd ff:ff:ff:ff:ff:ff

I fixed the exact same issue for IPv6 in commit c04f7dfe ("ipv6: Fix
address dump when IPv6 is disabled on an interface"), but noted [1] that
I am not doing the change for IPv4 because I am not aware of a way to
disable IPv4 on an interface other than unregistering it. I clearly
missed the above case.

[1] https://lore.kernel.org/netdev/20240321173042.2151756-1-idosch@nvidia.com/

Fixes: cdb2f80f ("inet: use xa_array iterator to implement inet_dump_ifaddr()")
Reported-by: Carolina Jubran <cjubran@nvidia.com>
Reported-by: Yamen Safadi <ysafadi@nvidia.com>
Tested-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240523110257.334315-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2024-05-27

We've added 15 non-merge commits during the last 7 day(s) which contain
a total of 18 files changed, 583 insertions(+), 55 deletions(-).

The main changes are:

1) Fix broken BPF multi-uprobe PID filtering logic which filtered by thread
   while the promise was to filter by process, from Andrii Nakryiko.

2) Fix the recent influx of syzkaller reports to sockmap which triggered
   a locking rule violation by performing a map_delete, from Jakub Sitnicki.

3) Fixes to netkit driver in particular on skb->pkt_type override upon pass
   verdict, from Daniel Borkmann.

4) Fix an integer overflow in resolve_btfids which can wrongly trigger build
   failures, from Friedrich Vock.

5) Follow-up fixes for ARC JIT reported by static analyzers,
   from Shahab Vahedi.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Cover verifier checks for mutating sockmap/sockhash
  Revert "bpf, sockmap: Prevent lock inversion deadlock in map delete elem"
  bpf: Allow delete from sockmap/sockhash only if update is allowed
  selftests/bpf: Add netkit test for pkt_type
  selftests/bpf: Add netkit tests for mac address
  netkit: Fix pkt_type override upon netkit pass verdict
  netkit: Fix setting mac address in l2 mode
  ARC, bpf: Fix issues reported by the static analyzers
  selftests/bpf: extend multi-uprobe tests with USDTs
  selftests/bpf: extend multi-uprobe tests with child thread case
  libbpf: detect broken PID filtering logic for multi-uprobe
  bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic
  bpf: fix multi-uprobe PID filtering logic
  bpf: Fix potential integer overflow in resolve_btfids
  MAINTAINERS: Add myself as reviewer of ARM64 BPF JIT
====================

Link: https://lore.kernel.org/r/20240527203551.29712-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Verifier enforces that only certain program types can mutate sock{map,hash}
maps, that is update it or delete from it. Add test coverage for these
checks so we don't regress.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-3-944b372f2101@cloudflare.com

This reverts commit ff910599.

This check is no longer needed. BPF programs attached to tracepoints are
now rejected by the verifier when they attempt to delete from a
sockmap/sockhash maps.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-2-944b372f2101@cloudflare.com

We have seen an influx of syzkaller reports where a BPF program attached to
a tracepoint triggers a locking rule violation by performing a map_delete
on a sockmap/sockhash.

We don't intend to support this artificial use scenario. Extend the
existing verifier allowed-program-type check for updating sockmap/sockhash
to also cover deleting from a map.

From now on only BPF programs which were previously allowed to update
sockmap/sockhash can delete from these map types.

Fixes: ff910599 ("bpf, sockmap: Prevent lock inversion deadlock in map delete elem")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+ec941d6e24f633a59172@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=ec941d6e24f633a59172
Link: https://lore.kernel.org/bpf/20240527-sockmap-verify-deletes-v1-1-944b372f2101@cloudflare.com

LED Select (LED_SEL) bit in the LED General Purpose IO Configuration
register is used to determine the functionality of external LED pins
(Speed Indicator, Link and Activity Indicator, Full Duplex Link
Indicator). The default value for this bit is 0 when no EEPROM is
present. If a EEPROM is present, the default value is the value of the
LED Select bit in the Configuration Flags of the EEPROM. A USB Reset or
Lite Reset (LRST) will cause this bit to be restored to the image value
last loaded from EEPROM, or to be set to 0 if no EEPROM is present.

While configuring the dual purpose GPIO/LED pins to LED outputs in the
LED General Purpose IO Configuration register, the LED_SEL bit is changed
as 0 and resulting the configured value from the EEPROM is cleared. The
issue is fixed by using read-modify-write approach.

Fixes: f293501c ("smsc95xx: configure LED outputs")
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Woojung Huh <woojung.huh@microchip.com>
Link: https://lore.kernel.org/r/20240523085314.167650-1-Parthiban.Veerasooran@microchip.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

There are two type of classes. "Leaf classes" that are  the
bottom of the class hierarchy. "Inner classes" that are neither
the root class nor leaf classes. QoS rules can only specify leaf
classes as targets for traffic.

			 Root
		        /  \
		       /    \
                      1      2
                             /\
                            /  \
                           4    5
               classes 1,4 and 5 are leaf classes.
               class 2 is a inner class.

When a leaf class made as inner, or vice versa, resources associated
with send queue (send queue buffers and transmit schedulers) are not
getting freed.

Fixes: 5e6808b4 ("octeontx2-pf: Add support for HTB offload")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240523073626.4114-1-hkelam@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

syzkaller reported data-race of sk->sk_hash in unix_autobind() [0],
and the same ones exist in unix_bind_bsd() and unix_bind_abstract().

The three bind() functions prefetch sk->sk_hash locklessly and
use it later after validating that unix_sk(sk)->addr is NULL under
unix_sk(sk)->bindlock.

The prefetched sk->sk_hash is the hash value of unbound socket set
in unix_create1() and does not change until bind() completes.

There could be a chance that sk->sk_hash changes after the lockless
read.  However, in such a case, non-NULL unix_sk(sk)->addr is visible
under unix_sk(sk)->bindlock, and bind() returns -EINVAL without using
the prefetched value.

The KCSAN splat is false-positive, but let's silence it by reading
sk->sk_hash under unix_sk(sk)->bindlock.

[0]:
BUG: KCSAN: data-race in unix_autobind / unix_autobind

write to 0xffff888034a9fb88 of 4 bytes by task 4468 on cpu 0:
 __unix_set_addr_hash net/unix/af_unix.c:331 [inline]
 unix_autobind+0x47a/0x7d0 net/unix/af_unix.c:1185
 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
 __sys_connect_file+0xd7/0xe0 net/socket.c:2048
 __sys_connect+0x114/0x140 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x40/0x50 net/socket.c:2072
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

read to 0xffff888034a9fb88 of 4 bytes by task 4465 on cpu 1:
 unix_autobind+0x28/0x7d0 net/unix/af_unix.c:1134
 unix_dgram_connect+0x7e3/0x890 net/unix/af_unix.c:1373
 __sys_connect_file+0xd7/0xe0 net/socket.c:2048
 __sys_connect+0x114/0x140 net/socket.c:2065
 __do_sys_connect net/socket.c:2075 [inline]
 __se_sys_connect net/socket.c:2072 [inline]
 __x64_sys_connect+0x40/0x50 net/socket.c:2072
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

value changed: 0x000000e4 -> 0x000001e3

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 4465 Comm: syz-executor.0 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: afd20b92 ("af_unix: Replace the big lock with small locks.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154218.78088-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Once unix_sk(sk)->addr is assigned under net->unx.table.locks and
unix_sk(sk)->bindlock, *(unix_sk(sk)->addr) and unix_sk(sk)->path are
fully set up, and unix_sk(sk)->addr is never changed.

unix_getname() and unix_copy_addr() access the two fields locklessly,
and commit ae3b5641 ("missing barriers in some of unix_sock ->addr
and ->path accesses") added smp_store_release() and smp_load_acquire()
pairs.

In other functions, we still read unix_sk(sk)->addr locklessly to check
if the socket is bound, and KCSAN complains about it.  [0]

Given these functions have no dependency for *(unix_sk(sk)->addr) and
unix_sk(sk)->path, READ_ONCE() is enough to annotate the data-race.

Note that it is safe to access unix_sk(sk)->addr locklessly if the socket
is found in the hash table.  For example, the lockless read of otheru->addr
in unix_stream_connect() is safe.

Note also that newu->addr there is of the child socket that is still not
accessible from userspace, and smp_store_release() publishes the address
in case the socket is accept()ed and unix_getname() / unix_copy_addr()
is called.

[0]:
BUG: KCSAN: data-race in unix_bind / unix_listen

write (marked) to 0xffff88805f8d1840 of 8 bytes by task 13723 on cpu 0:
 __unix_set_addr_hash net/unix/af_unix.c:329 [inline]
 unix_bind_bsd net/unix/af_unix.c:1241 [inline]
 unix_bind+0x881/0x1000 net/unix/af_unix.c:1319
 __sys_bind+0x194/0x1e0 net/socket.c:1847
 __do_sys_bind net/socket.c:1858 [inline]
 __se_sys_bind net/socket.c:1856 [inline]
 __x64_sys_bind+0x40/0x50 net/socket.c:1856
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

read to 0xffff88805f8d1840 of 8 bytes by task 13724 on cpu 1:
 unix_listen+0x72/0x180 net/unix/af_unix.c:734
 __sys_listen+0xdc/0x160 net/socket.c:1881
 __do_sys_listen net/socket.c:1890 [inline]
 __se_sys_listen net/socket.c:1888 [inline]
 __x64_sys_listen+0x2e/0x40 net/socket.c:1888
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x4f/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x46/0x4e

value changed: 0x0000000000000000 -> 0xffff88807b5b1b40

Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13724 Comm: syz-executor.4 Not tainted 6.8.0-12822-gcd51db110a7e #12
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240522154002.77857-1-kuniyu@amazon.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The hsr_ping test reports the following errors:

 INFO: preparing interfaces for HSRv0.
 INFO: Initial validation ping.
 INFO: Longer ping test.
 INFO: Cutting one link.
 INFO: Delay the link and drop a few packages.
 INFO: All good.
 INFO: preparing interfaces for HSRv1.
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 RTNETLINK answers: File exists
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 Error: ipv4: Address already assigned.
 Error: ipv6: address already assigned.
 INFO: Initial validation ping.

That is because the cleanup code for the 2nd round test before
"setup_hsr_interfaces 1" is removed incorrectly in commit 680fda4f
("test: hsr: Remove script code already implemented in lib.sh").

This patch fixes it by re-setup the namespaces using

	setup_ns ns1 ns2 ns3

command before "setup_hsr_interfaces 1". It deletes previous namespaces
and create new ones.

Fixes: 680fda4f ("test: hsr: Remove script code already implemented in lib.sh")
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/6485d3005f467758d49f0f313c8c009759ba6b05.1716374462.git.tanggeliang@kylinos.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

enic_set_vf_port assumes that the nl attribute IFLA_PORT_PROFILE
is of length PORT_PROFILE_MAX and that the nl attributes
IFLA_PORT_INSTANCE_UUID, IFLA_PORT_HOST_UUID are of length PORT_UUID_MAX.
These attributes are validated (in the function do_setlink in rtnetlink.c)
using the nla_policy ifla_port_policy. The policy defines IFLA_PORT_PROFILE
as NLA_STRING, IFLA_PORT_INSTANCE_UUID as NLA_BINARY and
IFLA_PORT_HOST_UUID as NLA_STRING. That means that the length validation
using the policy is for the max size of the attributes and not on exact
size so the length of these attributes might be less than the sizes that
enic_set_vf_port expects. This might cause an out of bands
read access in the memcpys of the data of these
attributes in enic_set_vf_port.

Fixes: f8bd9091 ("net: Add ndo_{set|get}_vf_port support for enic dynamic vnics")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Link: https://lore.kernel.org/r/20240522073044.33519-1-rzats@paloaltonetworks.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add a test case to assert that the skb->pkt_type which was set from the BPF
program is retained from the netkit xmit side to the peer's device at tcx
ingress location.

  # ./vmtest.sh -- ./test_progs -t netkit
  [...]
  ./test_progs -t netkit
  [    1.140780] bpf_testmod: loading out-of-tree module taints kernel.
  [    1.141127] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
  [    1.284601] tsc: Refined TSC clocksource calibration: 3408.006 MHz
  [    1.286672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd9b189d, max_idle_ns: 440795225691 ns
  [    1.290384] clocksource: Switched to clocksource tsc
  #345     tc_netkit_basic:OK
  #346     tc_netkit_device:OK
  #347     tc_netkit_multi_links:OK
  #348     tc_netkit_multi_opts:OK
  #349     tc_netkit_neigh_links:OK
  #350     tc_netkit_pkt_type:OK
  Summary: 6/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240524163619.26001-4-daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

This adds simple tests around setting MAC addresses in the different
netkit modes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240524163619.26001-3-daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When running Cilium connectivity test suite with netkit in L2 mode, we
found that compared to tcx a few tests were failing which pushed traffic
into an L7 proxy sitting in host namespace. The problem in particular is
around the invocation of eth_type_trans() in netkit.

In case of tcx, this is run before the tcx ingress is triggered inside
host namespace and thus if the BPF program uses the bpf_skb_change_type()
helper the newly set type is retained. However, in case of netkit, the
late eth_type_trans() invocation overrides the earlier decision from the
BPF program which eventually leads to the test failure.

Instead of eth_type_trans(), split out the relevant parts, meaning, reset
of mac header and call to eth_skb_pkt_type() before the BPF program is run
in order to have the same behavior as with tcx, and refactor a small helper
called eth_skb_pull_mac() which is run in case it's passed up the stack
where the mac header must be pulled. With this all connectivity tests pass.

Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240524163619.26001-2-daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

When running Cilium connectivity test suite with netkit in L2 mode, we
found that it is expected to be able to specify a custom MAC address for
the devices, in particular, cilium-cni obtains the specified MAC address
by querying the endpoint and sets the MAC address of the interface inside
the Pod. Thus, fix the missing support in netkit for L2 mode.

Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20240524163619.26001-1-daniel@iogearbox.netSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Also updated couple of comments along the way.

One of the issues reported was indeed a bug in the code:

  memset(ctx, 0, sizeof(ctx))      // original line
  memset(ctx, 0, sizeof(*ctx))     // fixed line

That was a nice catch.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405222314.UG5F2NHn-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202405232036.Xqoc3b0J-lkp@intel.com/Signed-off-by: Shahab Vahedi <shahab@synopsys.com>
Link: https://lore.kernel.org/r/20240525035628.1026-1-list+bpf@vahedi.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Andrii Nakryiko says:

====================
Fix BPF multi-uprobe PID filtering logic

It turns out that current implementation of multi-uprobe PID filtering logic
is broken. It filters by thread, while the promise is filtering by process.
Patch #1 fixes the logic trivially. The rest is testing and mitigations that
are necessary for libbpf to not break users of USDT programs.

v1->v2:
  - fix selftest in last patch (CI);
  - use semicolon in patch #3 (Jiri).
====================

Link: https://lore.kernel.org/r/20240521163401.3005045-1-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Validate libbpf's USDT-over-multi-uprobe logic by adding USDTs to
existing multi-uprobe tests. This checks correct libbpf fallback to
singular uprobes (when run on older kernels with buggy PID filtering).
We reuse already established child process and child thread testing
infrastructure, so additions are minimal. These test fail on either
older kernels or older version of libbpf that doesn't detect PID
filtering problems.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-6-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Extend existing multi-uprobe tests to test that PID filtering works
correctly. We already have child *process* tests, but we need also child
*thread* tests. This patch adds spawn_thread() helper to start child
thread, wait for it to be ready, and then instruct it to trigger desired
uprobes.

Additionally, we extend BPF-side code to track thread ID, not just
process ID. Also we detect whether extraneous triggerings with
unexpected process IDs happened, and validate that none of that happened
in practice.

These changes prove that fixed PID filtering logic for multi-uprobe
works as expected. These tests fail on old kernels.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-5-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Libbpf is automatically (and transparently to user) detecting
multi-uprobe support in the kernel, and, if supported, uses
multi-uprobes to improve USDT attachment speed.

USDTs can be attached system-wide or for the specific process by PID. In
the latter case, we rely on correct kernel logic of not triggering USDT
for unrelated processes.

As such, on older kernels that do support multi-uprobes, but still have
broken PID filtering logic, we need to fall back to singular uprobes.

Unfortunately, whether user is using PID filtering or not is known at
the attachment time, which happens after relevant BPF programs were
loaded into the kernel. Also unfortunately, we need to make a call
whether to use multi-uprobes or singular uprobe for SEC("usdt") programs
during BPF object load time, at which point we have no information about
possible PID filtering.

The distinction between single and multi-uprobes is small, but important
for the kernel. Multi-uprobes get BPF_TRACE_UPROBE_MULTI attach type,
and kernel internally substitiute different implementation of some of
BPF helpers (e.g., bpf_get_attach_cookie()) depending on whether uprobe
is multi or singular. So, multi-uprobes and singular uprobes cannot be
intermixed.

All the above implies that we have to make an early and conservative
call about the use of multi-uprobes. And so this patch modifies libbpf's
existing feature detector for multi-uprobe support to also check correct
PID filtering. If PID filtering is not yet fixed, we fall back to
singular uprobes for USDTs.

This extension to feature detection is simple thanks to kernel's -EINVAL
addition for pid < 0.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-4-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), so there is no point to do this one extra time.

This is a drive-by improvement and has no correctness implications.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-3-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Current implementation of PID filtering logic for multi-uprobes in
uprobe_prog_run() is filtering down to exact *thread*, while the intent
for PID filtering it to filter by *process* instead. The check in
uprobe_prog_run() also differs from the analogous one in
uprobe_multi_link_filter() for some reason. The latter is correct,
checking task->mm, not the task itself.

Fix the check in uprobe_prog_run() to perform the same task->mm check.

While doing this, we also update get_pid_task() use to use PIDTYPE_TGID
type of lookup, given the intent is to get a representative task of an
entire process. This doesn't change behavior, but seems more logical. It
would hold task group leader task now, not any random thread task.

Last but not least, given multi-uprobe support is half-broken due to
this PID filtering logic (depending on whether PID filtering is
important or not), we need to make it easy for user space consumers
(including libbpf) to easily detect whether PID filtering logic was
already fixed.

We do it here by adding an early check on passed pid parameter. If it's
negative (and so has no chance of being a valid PID), we return -EINVAL.
Previous behavior would eventually return -ESRCH ("No process found"),
given there can't be any process with negative PID. This subtle change
won't make any practical change in behavior, but will allow applications
to detect PID filtering fixes easily. Libbpf fixes take advantage of
this in the next patch.

Cc: stable@vger.kernel.org
Acked-by: Jiri Olsa <jolsa@kernel.org>
Fixes: b733eead ("bpf: Add pid filter support for uprobe_multi link")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240521163401.3005045-2-andrii@kernel.orgSigned-off-by: Alexei Starovoitov <ast@kernel.org>

err is a 32-bit integer, but elf_update returns an off_t, which is 64-bit
at least on 64-bit platforms. If symbols_patch is called on a binary between
2-4GB in size, the result will be negative when cast to a 32-bit integer,
which the code assumes means an error occurred. This can wrongly trigger
build failures when building very large kernel images.

Fixes: fbbb68de ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Friedrich Vock <friedrich.vock@gmx.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240514070931.199694-1-friedrich.vock@gmx.de

Tariq Toukan says:

====================
mlx5 fixes 24-05-22

This patchset provides bug fixes to mlx5 core and Eth drivers.

Series generated against:
commit 9c91c7fa ("net: mana: Fix the extra HZ in mana_hwc_send_request")
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When the skb is encapsulated, adjust the inner UDP header instead of the
outer one, and account for UDP header (instead of TCP) in the inline
header size calculation.

Fixes: 689adf0d ("net/mlx5e: Add UDP GSO support")
Reported-by: Jason Baron <jbaron@akamai.com>
Closes: https://lore.kernel.org/netdev/c42961cb-50b9-4a9a-bd43-87fe48d88d29@akamai.com/Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Previously, the driver incorrectly used rx_dropped to report device
buffer exhaustion.

According to the documentation, rx_dropped should not be used to count
packets dropped due to buffer exhaustion, which is the purpose of
rx_missed_errors.

Use rx_missed_errors as intended for counting packets dropped due to
buffer exhaustion.

Fixes: 269e6b3a ("net/mlx5e: Report additional error statistics in get stats ndo")
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ptp channel instance is only initialized when ptp traffic is first
processed by the driver. This means that there is a window in between when
port timestamping is enabled and ptp traffic is sent where the ptp channel
instance is not initialized. Accessing statistics during this window will
lead to an access violation (NULL + member offset). Check the validity of
the instance before attempting to query statistics.

  BUG: unable to handle page fault for address: 0000000000003524
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 109dfc067 P4D 109dfc067 PUD 1064ef067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 420 Comm: ethtool Not tainted 6.9.0-rc2-rrameshbabu+ #245
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/204
  RIP: 0010:mlx5e_stats_ts_get+0x4c/0x130
  <snip>
  Call Trace:
   <TASK>
   ? show_regs+0x60/0x70
   ? __die+0x24/0x70
   ? page_fault_oops+0x15f/0x430
   ? do_user_addr_fault+0x2c9/0x5c0
   ? exc_page_fault+0x63/0x110
   ? asm_exc_page_fault+0x27/0x30
   ? mlx5e_stats_ts_get+0x4c/0x130
   ? mlx5e_stats_ts_get+0x20/0x130
   mlx5e_get_ts_stats+0x15/0x20
  <snip>

Fixes: 3579032c ("net/mlx5e: Implement ethtool hardware timestamping statistics")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove faulty check disabling checksum offload and GSO for offload of
simple IPsec tunnel L4 traffic. Comment previously describing the deleted
code incorrectly claimed the check prevented double tunnel (or three layers
of ip headers).

Fixes: f1267798 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rx_create no longer allocates a modify_hdr instance that needs to be
cleaned up. The mlx5_modify_header_dealloc call will lead to a NULL pointer
dereference. A leak in the rules also previously occurred since there are
now two rules populated related to status.

  BUG: kernel NULL pointer dereference, address: 0000000000000000
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 109907067 P4D 109907067 PUD 116890067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 1 PID: 484 Comm: ip Not tainted 6.9.0-rc2-rrameshbabu+ #254
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Arch Linux 1.16.3-1-1 04/01/2014
  RIP: 0010:mlx5_modify_header_dealloc+0xd/0x70
  <snip>
  Call Trace:
   <TASK>
   ? show_regs+0x60/0x70
   ? __die+0x24/0x70
   ? page_fault_oops+0x15f/0x430
   ? free_to_partial_list.constprop.0+0x79/0x150
   ? do_user_addr_fault+0x2c9/0x5c0
   ? exc_page_fault+0x63/0x110
   ? asm_exc_page_fault+0x27/0x30
   ? mlx5_modify_header_dealloc+0xd/0x70
   rx_create+0x374/0x590
   rx_add_rule+0x3ad/0x500
   ? rx_add_rule+0x3ad/0x500
   ? mlx5_cmd_exec+0x2c/0x40
   ? mlx5_create_ipsec_obj+0xd6/0x200
   mlx5e_accel_ipsec_fs_add_rule+0x31/0xf0
   mlx5e_xfrm_add_state+0x426/0xc00
  <snip>

Fixes: 94af50c0 ("net/mlx5e: Unify esw and normal IPsec status table creation/destruction")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MTMP register (0x900a) capability offset is off-by-one, move it to
the right place.

Fixes: 1f507e80 ("net/mlx5: Expose NIC temperature via hardware monitoring kernel API")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

A proper query to MPIR needs to set the correct value in the depth field.
On embedded CPU this value is not necessarily zero. As there is no real
use case for multi-PF netdev on the embedded CPU of the smart NIC, block
this option.

This fixes the following failure:
ACCESS_REG(0x805) op_mod(0x1) failed, status bad system state(0x4), syndrome (0x685f19), err(-5)

Fixes: 678eb448 ("net/mlx5: SD, Implement basic query and instantiation")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the driver does not enforce that lag bond slaves must have
matching roce capabilities. Yet, in mlx5_do_bond(), the driver attempts
to enable roce on all vports of the bond slaves, causing the following
syndrome when one slave has no roce fw support:

mlx5_cmd_out_err:809:(pid 25427): MODIFY_NIC_VPORT_CONTEXT(0×755) op_mod(0×0)
failed, status bad parameter(0×3), syndrome (0xc1f678), err(-22)

Thus, create HW lag only if bond's slaves agree on roce state,
either all slaves have roce support resulting in a roce lag bond,
or none do, resulting in a raw eth bond.

Fixes: 7907f23a ("net/mlx5: Implement RoCE LAG feature")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Following a similar reinstate for the KSZ8081 and KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a5 ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.

Fixes: 6e2d85ec ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@landisgyr.com>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The implicit conversion from unsigned int to enum
proc_cn_event is invalid, so explicitly cast it
for compilation in a C++ compiler.
/usr/include/linux/cn_proc.h: In function 'proc_cn_event valid_event(proc_cn_event)':
/usr/include/linux/cn_proc.h:72:17: error: invalid conversion from 'unsigned int' to 'proc_cn_event' [-fpermissive]
   72 |         ev_type &= PROC_EVENT_ALL;
      |                 ^
      |                 |
      |                 unsigned int
Signed-off-by: Matt Jan <zoo868e@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Paolo Abeni:
 "Quite smaller than usual. Notably it includes the fix for the unix
  regression from the past weeks. The TCP window fix will require some
  follow-up, already queued.

  Current release - regressions:

   - af_unix: fix garbage collection of embryos

  Previous releases - regressions:

   - af_unix: fix race between GC and receive path

   - ipv6: sr: fix missing sk_buff release in seg6_input_core

   - tcp: remove 64 KByte limit for initial tp->rcv_wnd value

   - eth: r8169: fix rx hangup

   - eth: lan966x: remove ptp traps in case the ptp is not enabled

   - eth: ixgbe: fix link breakage vs cisco switches

   - eth: ice: prevent ethtool from corrupting the channels

  Previous releases - always broken:

   - openvswitch: set the skbuff pkt_type for proper pmtud support

   - tcp: Fix shift-out-of-bounds in dctcp_update_alpha()

  Misc:

   - a bunch of selftests stabilization patches"

* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
  r8169: Fix possible ring buffer corruption on fragmented Tx packets.
  idpf: Interpret .set_channels() input differently
  ice: Interpret .set_channels() input differently
  nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
  net: relax socket state check at accept time.
  tcp: remove 64 KByte limit for initial tp->rcv_wnd value
  net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
  tls: fix missing memory barrier in tls_init
  net: fec: avoid lock evasion when reading pps_enable
  Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
  testing: net-drv: use stats64 for testing
  net: mana: Fix the extra HZ in mana_hwc_send_request
  net: lan966x: Remove ptp traps in case the ptp is not enabled.
  openvswitch: Set the skbuff pkt_type for proper pmtud support.
  selftest: af_unix: Make SCM_RIGHTS into OOB data.
  af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
  tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
  selftests/net: use tc rule to filter the na packet
  ipv6: sr: fix memleak in seg6_hmac_init_algo
  af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
  ...