- 01 Jun, 2021 30 commits
-
-
Vladimir Oltean authored
So far we've succeeded in operating without keeping a copy of the phy-mode in the driver, since we already have the static config and we can look at the xMII Mode Parameters Table which already holds that information. But with the SJA1110, we cannot make the distinction between sgmii and 2500base-x, because to the hardware's static config, it's all SGMII. So add a phy_mode property per port inside struct sja1105_private. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
Looking at the SGMII PCS from SJA1110, which is accessed indirectly through a different base address as can be seen in the next patch, it appears odd that the address accessed through indirection still references the base address from the SJA1105S register map (first MDIO register is at 0x1f0000), when it could index the SGMII registers starting from zero. Except that the 0x1f0000 is not a base address at all, it seems. It is 0x1f << 16 | 0x0000, and 0x1f is coding for the vendor-specific MMD2. So, it turns out, the Synopsys PCS implements all its registers inside the vendor-specific MMDs 1 and 2 (0x1e and 0x1f). This explains why the PCS has no overlaps (for the other MMDs) with other register regions of the switch (because no other MMDs are implemented). Change the code to remove the SGMII "base address" and explicitly encode the MMD for reads/writes. This will become necessary for SJA1110 support. Cc: Russell King <linux@armlinux.org.uk> Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
The SJA1105 R and S switches have 1 SGMII port (port 4). Because there is only one such port, there is no "port" parameter in the configuration code for the SGMII PCS. However, the SJA1110 can have up to 4 SGMII ports, each with its own SGMII register map. So we need to generalize the logic. Signed-off-by:
-
Vladimir Oltean authored
Since commit f2f3e09396be ("net: dsa: sja1105: be compatible with "ethernet-ports" OF node name"), DSA supports the "ethernet-ports" name for the container node of the ports, but the sja1105 driver doesn't, because it handles some device tree parsing of its own. Add the second node name as a fallback. Signed-off-by: -
Shaokun Zhang authored
Function 'bnx2x_vfpf_release' is declared twice, so remove the repeated declaration. Cc: Ariel Elior <aelior@marvell.com> Cc: GR-everest-linux-l2@marvell.com Signed-off-by:
Shaokun Zhang <zhangshaokun@hisilicon.com> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Link: https://lore.kernel.org/r/1622449756-2627-1-git-send-email-zhangshaokun@hisilicon.comSigned-off-by:
-
Rocco Yue authored
The Tab key is used three times, causing the code block to be out of alignment with the context. Signed-off-by:
Rocco Yue <rocco.yue@mediatek.com> Link: https://lore.kernel.org/r/20210530113811.8817-1-rocco.yue@mediatek.comSigned-off-by:
-
Jakub Kicinski authored
Guangbin Huang says: ==================== net: sealevel: clean up some code style issues This patchset clean up some code style issues. ==================== Link: https://lore.kernel.org/r/1622355874-18933-1-git-send-email-huangguangbin2@huawei.comSigned-off-by:
-
Peng Li authored
Alignment should match open parenthesis. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Peng Li authored
Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by:
-
Peng Li authored
Remove the meaningless stylistically wrong comment. Signed-off-by:
-
Peng Li authored
According to the chackpatch.pl, switch and case should be at the same indent. Signed-off-by:
-
Peng Li authored
Should not initialise statics to false. Signed-off-by:
-
Peng Li authored
Add spaces required around that '='. Signed-off-by:
-
Peng Li authored
Fix the checkpatch error as open brace '{' following struct should go on the same line. Signed-off-by: -
Peng Li authored
Fix the checkpatch error as "(foo*)" should be "(foo *)". Signed-off-by:
-
Peng Li authored
This patch fixes the checkpatch error about missing a blank line after declarations. Signed-off-by:
-
Peng Li authored
This patch removes some redundant blank lines. Signed-off-by:
-
Willy Tarreau authored
This is a complement to commit aa6dd211 ("inet: use bigger hash table for IP ID generation"), but focusing on some specific aspects of IPv6. Contary to IPv4, IPv6 only uses packet IDs with fragments, and with a minimum MTU of 1280, it's much less easy to force a remote peer to produce many fragments to explore its ID sequence. In addition packet IDs are 32-bit in IPv6, which further complicates their analysis. On the other hand, it is often easier to choose among plenty of possible source addresses and partially work around the bigger hash table the commit above permits, which leaves IPv6 partially exposed to some possibilities of remote analysis at the risk of weakening some protocols like DNS if some IDs can be predicted with a good enough probability. Given the wide range of permitted IDs, the risk of collision is extremely low so there's no need to rely on the positive increment algorithm that is shared with the IPv4 code via ip_idents_reserve(). We have a fast PRNG, so let's simply call prandom_u32() and be done with it. Performance measurements at 10 Gbps couldn't show any difference with the previous code, even when using a single core, because due to the large fragments, we're limited to only ~930 kpps at 10 Gbps and the cost of the random generation is completely offset by other operations and by the network transfer time. In addition, this change removes the need to update a shared entry in the idents table so it may even end up being slightly faster on large scale systems where this matters. The risk of at least one collision here is about 1/80 million among 10 IDs, 1/850k among 100 IDs, and still only 1/8.5k among 1000 IDs, which remains very low compared to IPv4 where all IDs are reused every 4 to 80ms on a 10 Gbps flow depending on packet sizes. Reported-by:
Amit Klein <aksecurity@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210529110746.6796-1-w@1wt.euSigned-off-by:
-
Xie Yongji authored
This adds validation for used length (might come from an untrusted device) to avoid data corruption or loss. Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210531135852.113-1-xieyongji@bytedance.comSigned-off-by:
-
Krzysztof Kozlowski authored
Use tabs to indent instead of spaces. No functional change. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210531073902.7111-7-krzysztof.kozlowski@canonical.comSigned-off-by:
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. Signed-off-by:
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. Signed-off-by:
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. Signed-off-by:
-
Krzysztof Kozlowski authored
{} braces are not needed over single if-statement. Signed-off-by: -
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. Signed-off-by:
-
Krzysztof Kozlowski authored
Remove standard module init/exit boilerplate with module_driver() which also annotates the functions with __init. Signed-off-by:
-
Krzysztof Kozlowski authored
Correct block comments and usage of tab in function definition. No functional change. Signed-off-by:
-
Krzysztof Kozlowski authored
Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it. Signed-off-by:
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. Signed-off-by:
-
Krzysztof Kozlowski authored
Now that the kernel has ftrace, any debugging calls that just do "made it to this function!" and "leaving this function!" can be removed. Better to use standard debugging tools. This allows also to remove several local variables and entire fdp_nci_recv_frame() function (whose purpose was only to log). Signed-off-by:
-
- 30 May, 2021 8 commits
-
-
Jakub Kicinski authored
Peter Geis says: ==================== fixes for yt8511 phy driver The Intel clang bot caught a few uninitialized variables in the new Motorcomm driver. While investigating the issue, it was found that the driver would have unintended effects when used in an unsupported mode. Fixed the uninitialized ret variable and abort loading the driver in unsupported modes. ==================== Link: https://lore.kernel.org/r/20210529110556.202531-1-pgwipeout@gmail.comSigned-off-by:
-
Peter Geis authored
While investigating the clang `ge` uninitialized variable report, it was discovered the default switch would have unintended consequences. Due to the switch to __phy_modify, the driver would modify the ID values in the default scenario. Fix this by promoting the interface mode switch and aborting when the mode is not a supported RGMII mode. This prevents the `ge` and `fe` variables from ever being used uninitialized. Fixes: 48e8c6f1 ("net: phy: add driver for Motorcomm yt8511 phy") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Peter Geis <pgwipeout@gmail.com> Signed-off-by:
-
Peter Geis authored
clang doesn't preinitialize variables. If phy_select_page failed and returned an error, phy_restore_page would be called with `ret` being uninitialized. Even though phy_restore_page won't use `ret` in this scenario, initialize `ret` to silence the warning. Fixes: 48e8c6f1 ("net: phy: add driver for Motorcomm yt8511 phy") Reported-by:
-
Jakub Kicinski authored
Yang Yingliang says: ==================== net: dsa: qca8k: check return value of read functions correctly patch #1 - Change return type and add output parameter to make check return value of read functions correctly. patch #2 - Add missing check return value in qca8k_phylink_mac_config(). ==================== Link: https://lore.kernel.org/r/20210529030439.1723306-1-yangyingliang@huawei.comSigned-off-by:
-
Yang Yingliang authored
Now we can check qca8k_read() return value correctly, so if it fails, we need return directly. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Yang Yingliang authored
Current return type of qca8k_mii_read32() and qca8k_read() are unsigned, it can't be negative, so the return value check is unuseful. For check the return value correctly, change return type of the read functions and add a output parameter to store the read value. Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20210528202225.GA39855@embeddedorSigned-off-by:
-
Gustavo A. R. Silva authored
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding a fallthrough statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115Signed-off-by:
-
- 29 May, 2021 2 commits
-
-
Jakub Kicinski authored
George Cherian says: ==================== NPC KPU updates Add support for - Loading Custom KPU profile entries - Add NPC profile Load from System Firmware DB - Add Support fo Coalescing KPU profiles - General Updates/Fixes to default KPU profile ==================== Link: https://lore.kernel.org/r/20210527094439.1910013-1-george.cherian@marvell.comSigned-off-by:
-
George Cherian authored
Add support for parsing following 1. NGIO 2. PPPOE 3. 24 byte custom L2 header 4. CPT Header 5. Fragmented CPT packets 6. VLAN EXDSA Fix for 1. EDSA VLAN parsing 2. Enhance FDSA 3. CPT Header parsing Remove ITAG support Signed-off-by:
Sunil Kovvuri Goutham <Sunil.Goutham@marvell.com> Signed-off-by:
Harman Kalra <hkalra@marvell.com> Signed-off-by:
Kiran Kumar K <kirankumark@marvell.com> Signed-off-by:
George Cherian <george.cherian@marvell.com> Signed-off-by:
-
