- 16 Aug, 2022 33 commits
-
-
Andrey Strachuk authored
Local variable 'rq' is initialized by an address of field of drm_sched_job, so it does not make sense to compare 'rq' with NULL. Found by Linux Verification Center (linuxtesting.org) with SVACE. Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Andrey Strachuk <strochuk@ispras.ru> Fixes: 7c6e68c7 ("drm/amdgpu: Avoid HW GPU reset for RAS.") Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Harish Kasiviswanathan authored
Was missing. Add it. Signed-off-by:
Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Samson Tam authored
[Why & How] Add GC_11_0_3_A0 as a chip revision to the DCN32 family Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Brian Chang <Brian.Chang@amd.com> Signed-off-by:
Samson Tam <samson.tam@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Charlene Liu authored
[why] this is to ensure that driver will not reprogram hvm_prefetch_req again if it is done. Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Charlene Liu <Charlene.Liu@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Use pitch when calculating size to cache in MALL Reviewed-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Alvin Lee authored
[Description] Don't set DSC bit for phantom pipes, not required since phantom pipe don't have any actual output Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why & How] Depending on how the clock table is constructed from PMFW we can run into issues where we don't think we have enough bandwidth available due to FCLK too low - eg. when the FCLK table contains invalid entries or a single entry. We should always pick up the maximum clocks for each state as a final state in this case to prevent validation from failing if the table is malformed. We should also contain sensible defaults in the case where values are invalid. Redfine the clock table structures by adding a 314 prefix to make debugging these issues easier by avoiding symbol name clashes. Overall this policy more closely aligns to how we did things for 315, but because of how the voltage rail is setup we should favor keeping DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those in every entry. Reviewed-by:
Daniel Miess <daniel.miess@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by:
-
Chaitanya Dhere authored
[Why] Recent backport from opensource broke the Nightly tool build that tests DC and DML for bugs and regressions. This was because the backport had a header inclusion that was not consistent with the AMD style of including headers was allowed to be merged back in DML code that caused tool compilation failures. [How] Modify the way in which the header file in included so that it is consistent with AMD style of including headers. This then automatically fixes the tool compilation process and also helps maintain the code quality and consistency. Reviewed-by:
Chaitanya Dhere <chaitanya.dhere@amd.com> Tested-by:
-
Tom Chung authored
[Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue. [How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available. Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Tested-by:
-
Daniel Miess authored
[Why] Need a way to retain default clock table to aid the investigation into why 8k@30 display not lighting up on dcn314 [How] Use flag to prevent execution of bw_params helper function and function for updating bw_bounding_box Reviewed-by:
-
Dusica Milinkovic authored
[Why] During multi-vf executing benchmark (Luxmark) observed kiq error timeout. It happenes because all of VFs do the tlb invalidation at the same time. Although each VF has the invalidate register set, from hardware side the invalidate requests are queue to execute. [How] In case of 12 VF increase timeout on 12*100ms Signed-off-by:
Dusica Milinkovic <Dusica.Milinkovic@amd.com> Acked-by:
Shaoyun Liu <shaoyun.liu@amd.com> Acked-by:
-
Josip Pavic authored
[Why & How] Increase width of some variables to avoid comparing integers of different widths. Reviewed-by:
Josip Pavic <Josip.Pavic@amd.com> Tested-by:
-
Ian Chen authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Ian Chen <ian.chen@amd.com> Tested-by:
-
Ilya Bakoulin authored
[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
Ilya Bakoulin <Ilya.Bakoulin@amd.com> Tested-by:
-
Aric Cyr authored
This version brings along following fixes: -Fix edp panel missing event -Set ARGB16161616 pixel format to 26 -Fix dcn32 interger issue -Clear optc underflow bit after ODM clock off -Fix issue with stereo3D -Fix DML2 lightup issue -Correct DTBCLK for dcn314 -Revert for a regression -Fix clocks and bugs in DML2 -Enable SubVP by defalut on DCN32 & DCN321 -Corret boundary condition for engin ID on DCN303 -Fix FRL encoder override registry key -Fix VPG for dcn314 HPO -Fix Linux compile-time warning -Add new prefetch modes in DML for DCN32 Acked-by:
-
Ethan Wellenreiter authored
[WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by:
Ethan Wellenreiter <Ethan.Wellenreiter@amd.com> Tested-by:
-
Tim Huang authored
The driver needs to set EnableGfxImu message parameter to tell the PMFW to set the flag that enables the GFXOFF feature. Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_IH_CG support. Signed-off-by:
-
Dan Carpenter authored
This code has two bugs. If kfd_topology_device_by_proximity_domain() failed on the first iteration through the loop then "cpu_link" is uninitialized and should not be dereferenced. The second bug is that we cannot dereference a list iterator when it points to the list head. In other words, if we exit the list_for_each_entry() loop exits without hitting a break then "cpu_link" is not a valid pointer and should not be dereferenced. Fix both of these problems by setting "cpu_link" to NULL when it is invalid and non-NULL when it is valid. That makes it easier to test for valid vs invalid. Fixes: 0f28cca8 ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Yifan Zhang authored
There is only one engine in sdma 6.0.1, the total number of reserved queues should be 2, reflect this number in bitmap as well. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support. Signed-off-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support. Signed-off-by:
-
Tim Huang authored
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support. Signed-off-by:
-
Tim Huang authored
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating. The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1, so need to add IP version checking to use the right REG offset. Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for HDP IP v5.2.1. Signed-off-by:
-
Tim Huang authored
Add set/get_clockgating for MMHUB IP v3.0.1. Signed-off-by:
-
Tim Huang authored
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by:
-
Felix Kuehling authored
Use the mm reference from the fence. This allows removing the svm_bo->svms pointer, which was problematic because we cannot assume that the struct kfd_process containing the svms is still allocated without holding a refcount on the process. Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo reference if it isn't. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
-
Kenneth Feng authored
add mode1 support since it's missing on smu_v13_0_7 Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Kenneth Feng authored
add ih cg and hdp sd on smu_v13_0_7 Signed-off-by:
-
Evan Quan authored
Without these, potential memory leak may be induced. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
To avoid any potential memory leak. Signed-off-by:
-
Evan Quan authored
Some stability issues were reported with these features. Signed-off-by:
-
- 10 Aug, 2022 7 commits
-
-
Sebin Sebastian authored
Fix a double free and an uninitialized pointer read error. Both tmp and new are pointing at same address and both are freed which leads to double free. Adding a check to verify if new and tmp are free in the error_free label fixes the double free issue. new is not initialized to null which also leads to a free on an uninitialized pointer. Reviewed-by:
André Almeida <andrealmeid@igalia.com> Suggested by: S. Amaranath <Amaranath.Somalapuram@amd.com> Signed-off-by:
Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by:
-
Alex Deucher authored
We changed it for all asics due to a hibernation regression on hawaii, but the workaround breaks suspend on a polaris12. Just disable it for hawaii. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216119 Fixes: 3a4b1cc2 ("drm/amdgpu/display: disable prefer_shadow for generic fb helpers") Reviewed-and-tested-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Melissa Wen authored
To set the panel orientation property with quirk, we need the mode size provided by EDID. This info is available after EDID is read by dc_link_detect() and updated by amdgpu_dm_update_connector_after_detect(). The detection happens at driver load in amdgpu_dm_initialize_drm_device() and, therefore, we can get modes and set panel orientation before drm_dev_register() to avoid DRM warns on creating the connector property after device registration: [ 2.563969] ------------[ cut here ]------------ [ 2.563971] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:45 drm_mode_object_add+0x72/0x80 [drm] [ 2.563997] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564032] CPU: 6 PID: 325 Comm: systemd-udevd Not tainted 5.18.0-amd-staging-drm-next+ #67 [ 2.564034] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564036] RIP: 0010:drm_mode_object_add+0x72/0x80 [drm] [ 2.564053] Code: f0 89 c3 85 c0 78 07 89 45 00 44 89 65 04 4c 89 ef e8 e2 99 04 f1 31 c0 85 db 0f 4e c3 5b 5d 41 5c 41 5d c3 80 7f 50 00 74 ac <0f> 0b eb a8 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 4c [ 2.564055] RSP: 0018:ffffb2e880413860 EFLAGS: 00010202 [ 2.564056] RAX: ffffffffc0ba1440 RBX: ffff99508a860010 RCX: 0000000000000001 [ 2.564057] RDX: 00000000b0b0b0b0 RSI: ffff99508c050110 RDI: ffff99508a860010 [ 2.564058] RBP: ffff99508c050110 R08: 0000000000000020 R09: ffff99508c292c20 [ 2.564059] R10: 0000000000000000 R11: ffff99508c0507d8 R12: 00000000b0b0b0b0 [ 2.564060] R13: 0000000000000004 R14: ffffffffc068a4b6 R15: ffffffffc068a47f [ 2.564061] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564063] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564065] Call Trace: [ 2.564068] <TASK> [ 2.564070] drm_property_create+0xc9/0x170 [drm] [ 2.564088] drm_property_create_enum+0x1f/0x70 [drm] [ 2.564105] drm_connector_set_panel_orientation_with_quirk+0x96/0xc0 [drm] [ 2.564123] get_modes+0x4fb/0x530 [amdgpu] [ 2.564378] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.564390] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.564411] ? xas_store+0x52/0x5e0 [ 2.564416] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564420] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.564430] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.564438] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.564446] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.564621] local_pci_probe+0x45/0x80 [ 2.564625] ? pci_match_device+0xd7/0x130 [ 2.564627] pci_device_probe+0xbf/0x220 [ 2.564629] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.564633] really_probe+0x19c/0x380 [ 2.564637] __driver_probe_device+0xfe/0x180 [ 2.564639] driver_probe_device+0x1e/0x90 [ 2.564641] __driver_attach+0xc0/0x1c0 [ 2.564643] ? __device_attach_driver+0xe0/0xe0 [ 2.564644] ? __device_attach_driver+0xe0/0xe0 [ 2.564646] bus_for_each_dev+0x78/0xc0 [ 2.564648] bus_add_driver+0x149/0x1e0 [ 2.564650] driver_register+0x8f/0xe0 [ 2.564652] ? 0xffffffffc1023000 [ 2.564654] do_one_initcall+0x44/0x200 [ 2.564657] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.564659] do_init_module+0x4c/0x250 [ 2.564663] __do_sys_init_module+0x12e/0x1b0 [ 2.564666] do_syscall_64+0x3b/0x90 [ 2.564670] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.564673] RIP: 0033:0x7fc69bff232e [ 2.564674] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.564676] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.564677] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.564678] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.564679] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.564680] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.564681] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.564683] </TASK> [ 2.564683] ---[ end trace 0000000000000000 ]--- [ 2.564696] ------------[ cut here ]------------ [ 2.564696] WARNING: CPU: 6 PID: 325 at drivers/gpu/drm/drm_mode_object.c:242 drm_object_attach_property+0x52/0x80 [drm] [ 2.564717] Modules linked in: btusb btrtl btbcm btintel btmtk bluetooth rfkill ecdh_generic ecc usbhid crc16 amdgpu(+) drm_ttm_helper ttm agpgart gpu_sched i2c_algo_bit drm_display_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm serio_raw sdhci_pci atkbd libps2 cqhci vivaldi_fmap ccp sdhci i8042 crct10dif_pclmul crc32_pclmul hid_multitouch ghash_clmulni_intel aesni_intel crypto_simd cryptd wdat_wdt mmc_core cec xhci_pci sp5100_tco rng_core xhci_pci_renesas serio 8250_dw i2c_hid_acpi i2c_hid btrfs blake2b_generic libcrc32c crc32c_generic crc32c_intel xor raid6_pq dm_mirror dm_region_hash dm_log dm_mod pkcs8_key_parser crypto_user [ 2.564738] CPU: 6 PID: 325 Comm: systemd-udevd Tainted: G W 5.18.0-amd-staging-drm-next+ #67 [ 2.564740] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0105 03/21/2022 [ 2.564741] RIP: 0010:drm_object_attach_property+0x52/0x80 [drm] [ 2.564759] Code: 2d 83 f8 18 74 33 48 89 74 c1 08 48 8b 4f 08 48 89 94 c1 c8 00 00 00 48 8b 47 08 83 00 01 c3 4d 85 d2 75 dd 83 7f 58 01 75 d7 <0f> 0b eb d3 41 80 78 50 00 74 cc 0f 0b eb c8 44 89 ce 48 c7 c7 28 [ 2.564760] RSP: 0018:ffffb2e8804138d8 EFLAGS: 00010246 [ 2.564761] RAX: 0000000000000010 RBX: ffff99508c1a2000 RCX: ffff99508c1a2180 [ 2.564762] RDX: 0000000000000003 RSI: ffff99508c050100 RDI: ffff99508c1a2040 [ 2.564763] RBP: 00000000ffffffff R08: ffff99508a860010 R09: 00000000c0c0c0c0 [ 2.564763] R10: 0000000000000000 R11: 0000000000000020 R12: ffff99508a860010 [ 2.564764] R13: ffff995088733008 R14: ffff99508c1a2000 R15: ffffffffc068a47f [ 2.564765] FS: 00007fc69b5f1a40(0000) GS:ffff9953aff80000(0000) knlGS:0000000000000000 [ 2.564766] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.564767] CR2: 00007f9506804000 CR3: 0000000107f92000 CR4: 0000000000350ee0 [ 2.564768] Call Trace: [ 2.564769] <TASK> [ 2.564770] drm_connector_set_panel_orientation_with_quirk+0x4a/0xc0 [drm] [ 2.564789] get_modes+0x4fb/0x530 [amdgpu] [ 2.565024] drm_helper_probe_single_connector_modes+0x1ad/0x850 [drm_kms_helper] [ 2.565036] drm_client_modeset_probe+0x229/0x1400 [drm] [ 2.565056] ? xas_store+0x52/0x5e0 [ 2.565060] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565062] __drm_fb_helper_initial_config_and_unlock+0x44/0x4e0 [drm_kms_helper] [ 2.565072] drm_fbdev_client_hotplug+0x173/0x210 [drm_kms_helper] [ 2.565080] drm_fbdev_generic_setup+0xa5/0x166 [drm_kms_helper] [ 2.565088] amdgpu_pci_probe+0x35e/0x370 [amdgpu] [ 2.565261] local_pci_probe+0x45/0x80 [ 2.565263] ? pci_match_device+0xd7/0x130 [ 2.565265] pci_device_probe+0xbf/0x220 [ 2.565267] ? sysfs_do_create_link_sd+0x69/0xd0 [ 2.565268] really_probe+0x19c/0x380 [ 2.565270] __driver_probe_device+0xfe/0x180 [ 2.565272] driver_probe_device+0x1e/0x90 [ 2.565274] __driver_attach+0xc0/0x1c0 [ 2.565276] ? __device_attach_driver+0xe0/0xe0 [ 2.565278] ? __device_attach_driver+0xe0/0xe0 [ 2.565279] bus_for_each_dev+0x78/0xc0 [ 2.565281] bus_add_driver+0x149/0x1e0 [ 2.565283] driver_register+0x8f/0xe0 [ 2.565285] ? 0xffffffffc1023000 [ 2.565286] do_one_initcall+0x44/0x200 [ 2.565288] ? kmem_cache_alloc_trace+0x177/0x2c0 [ 2.565290] do_init_module+0x4c/0x250 [ 2.565291] __do_sys_init_module+0x12e/0x1b0 [ 2.565294] do_syscall_64+0x3b/0x90 [ 2.565296] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2.565297] RIP: 0033:0x7fc69bff232e [ 2.565298] Code: 48 8b 0d 45 0b 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 af 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 12 0b 0c 00 f7 d8 64 89 01 48 [ 2.565299] RSP: 002b:00007ffe872ba3e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 2.565301] RAX: ffffffffffffffda RBX: 000055873f797820 RCX: 00007fc69bff232e [ 2.565302] RDX: 000055873f7bf390 RSI: 0000000001155e81 RDI: 00007fc699e4d010 [ 2.565303] RBP: 00007fc699e4d010 R08: 000055873f7bfe20 R09: 0000000001155e90 [ 2.565303] R10: 000000055873f7bf R11: 0000000000000246 R12: 000055873f7bf390 [ 2.565304] R13: 000000000000000d R14: 000055873f7c4cb0 R15: 000055873f797820 [ 2.565306] </TASK> [ 2.565307] ---[ end trace 0000000000000000 ]--- -- v2: - call amdgpu_dm_connector_get_modes() instead of ddc_get_modes() (Harry) Fixes: d77de788 ("amd/display: enable panel orientation quirks") Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
-
Zhen Ni authored
Memory is allocated for gpu_metrics_table in smu_v13_0_5_init_smc_tables(), but not freed in smu_v13_0_5_fini_smc_tables(). This may cause memory leaks, fix it. Reviewed-by:
Zhen Ni <nizhen@uniontech.com> Signed-off-by:
-
Zhen Ni authored
Memory is allocated for gpu_metrics_table in smu_v13_0_4_init_smc_tables(), but not freed in smu_v13_0_4_fini_smc_tables(). This may cause memory leaks, fix it. Reviewed-by:
-
Tim Huang authored
Add AMD_PG_SUPPORT_GFX_PG support. Signed-off-by:
-
Tim Huang authored
Enable GFX Power Gating control for GC IP v11.0.1. Signed-off-by:
-
