- 06 Aug, 2015 19 commits
-
-
Daniel Vetter authored
The last user is gone, no need for trylocking any more in this legacy helper. Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Daniel Vetter authored
Since the panic handling is gone this is only used for force-restoring the fbdev/fbcon from sysrq, and that's done with a work item. No need any more to do trylocks, we can just do normal locking. Reviewed-by:
-
Daniel Vetter authored
Trying to do anything with kms drivers when oopsing has become a failing proposition. But since we can end up in the fbdev code simply due to the console unblanking that's done unconditionally just removing our panic handler isn't enough. We need to block all fbdev callbacks when oopsing. There was already one in the blank handler, but it failed silently. That makes it impossible for drivers (like i915) who subclass these functions to figure this out. Instead consistently return -EBUSY so that everyone knows that we really don't want to be bothered right now. This also allows us to remove a pile of FIXMEs from the i915 fbdev code (since due to the failure code they now won't attempt to grab dangerous locks any more). Cc: Dave Airlie <airlied@gmail.com> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Reviewed-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v2: - remove unused variable device in udlfb_create Cc: David Airlie <airlied@linux.ie> Cc: Haixia Shi <hshi@chromium.org> Cc: "Stéphane Marchesin" <marcheu@chromium.org> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cc: David Airlie <airlied@linux.ie> Cc: Frediano Ziglio <fziglio@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v2: - removed unused variable 'device' in psbfb_create Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v2: - Remove unnecessary dealloc cmap in error handling path Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cc: Rob Clark <robdclark@gmail.com> Cc: Stephane Viau <sviau@codeaurora.org> Cc: Hai Li <hali@codeaurora.org> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. v2: - Fix up error handling path in tegra_fbdev_probe Cc: Thierry Reding <thierry.reding@gmail.com> Cc: "Terje Bergström" <tbergstrom@nvidia.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cleaned up the error handling in astfb_create a bit. v2: - removed unused variable 'device' in astfb_create Cc: David Airlie <airlied@linux.ie> Cc: "Y.C. Chen" <yc_chen@aspeedtech.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Archit Taneja authored
Use the newly created wrapper drm_fb_helper functions instead of calling core fbdev functions directly. They also simplify the fb_info creation. This is an effort to create a top level drm fbdev emulation option. Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Archit Taneja authored
Some drm drivers call fb_set_suspend. Create a drm_fb_helper function that wraps around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v3: - Fixed kerneldoc errors v2: - Added kerneldocs - Added a check for non-NULL fb_helper before proceeding. This will make the helpers work when we have a module param for fbdev emulation - Follow the drm way of aligning of arguments in func definitions Signed-off-by:
-
Archit Taneja authored
drm drivers that emulate fbdev populate their fb_fillrect, fb_copyarea and fb_imageblit fb_ops with the help of cfb_* or sys_* fbdev core helper functions. Create drm_fb_helper functions that wrap around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v3: - Fixed kerneldoc errors v2: - Added kerneldocs - Follow the drm way of aligning of arguments in func definitions - Remove unnecessary checks for non NULL fb_info Signed-off-by:
-
Archit Taneja authored
Some drm drivers populate their fb_ops with fb_sys_read/write fb sysfs ops. Create a drm_fb_helper function that wraps around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v3: - Fix kerneldoc errors v2: - Added kerneldocs - Follow the drm way of aligning of arguments in func definitions - Remove unnecessary checks for non NULL fb_info Signed-off-by:
-
Archit Taneja authored
Some drm drivers call unlink_framebuffer. Create a drm_fb_helper function that wraps around these calls. This is part of an effort to prevent drm drivers from calling fbdev functions directly, in order to make fbdev emulation a top level drm option. v2: - Added kerneldocs - Added a check for non-NULL fb_helper before proceeding. This will make the helpers work when we have a module param for fbdev emulation Signed-off-by:
-
Archit Taneja authored
Every drm driver calls framebuffer_alloc, fb_alloc_cmap, unregister_framebuffer, fb_dealloc_cmap and framebuffer_release in order to emulate fbdev support. Create drm_fb_helper functions that perform the above operations. This is part of an effort to prevent drm drivers from calling fbdev functions directly. It also removes repetitive code from drivers. There are some drivers that call alloc_apertures after framebuffer_alloc and some that don't. Make the helper always call alloc_apertures. This would make certain drivers allocate memory for apertures but not use them. Since it's a small amount of memory, it shouldn't be an issue. v2: - Added kerneldocs - Added a check for non-NULL fb_helper before proceeding. This will make the helpers work when we have a module param for fbdev emulation Signed-off-by:
-
Daniel Vetter authored
Maarten didn't fully test his patches on all drm drivers and apparently missed a few places when grepping. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 27 Jul, 2015 4 commits
-
-
Maarten Lankhorst authored
This is required for DPMS to work correctly, during a modeset the DPMS property should be turned off, unless the state is crtc is made active in which case it should be set to DPMS on. Changes since v1: - Set DPMS to off when a connector is removed from a crtc too. - Update the legacy dpms property too. - Add an exception for the legacy dpms paths, it updates its own state. Changes since v2: - Do not preserve dpms property. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Maarten Lankhorst authored
This is required to properly handle failing dpms calls. When making a wait in i915 interruptible, I've noticed that the dpms sequence could fail with -ERESTARTSYS because it was waiting interruptibly for flips. So from now on allow drivers to fail in their connector dpms callback. Encoder and crtc dpms callbacks are unaffected. Changes since v1: - Update kerneldoc for the drm helper functions. Signed-off-by:
-
Maarten Lankhorst authored
In intel it's useful to keep track of some state changes with old crtc state vs new state, for example to disable initial planes or when a modeset's prevented during fastboot. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> [danvet: squash in fixup for exynos provided by Maarten.] Signed-off-by:
-
Maarten Lankhorst authored
This can be a separate case from mode_changed, when connectors stay the same but only the mode is different. Drivers may choose to implement specific optimizations to prevent a full modeset for this case. Changes since v1: - Update kerneldocs slightly. Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
- 26 Jul, 2015 1 commit
-
-
Rodrigo Vivi authored
By Vesa's DP 1.2 Spec this counter has 4 bits [3:0]. This mask is wrong since when the counter was introduced by myself on commit ad9dc91b Author: Rodrigo Vivi <rodrigo.vivi@gmail.com> Date: Tue Sep 16 19:18:12 2014 -0400 drm/i915: Fix Sink CRC Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by:
-
- 24 Jul, 2015 5 commits
-
-
Dave Airlie authored
Merge tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel into drm-next connector hotplug locking cleanup and fixes to make it save against atomic. Note that because of depencies this is based on top of the drm-intel-next pull, so that one needs to go in before this one. I've also thrown in the mode_group removal on top since it's defunct, never worked really, no one seems to care and the code can be resurrected easily. * tag 'topic/connector-locking-2015-07-23' of git://anongit.freedesktop.org/drm-intel: drm: gc now dead mode_group code drm: Stop filtering according to mode_group in getresources drm: Roll out drm_for_each_{plane,crtc,encoder} drm/cma-helper: Fix locking in drm_fb_cma_debugfs_show drm: Roll out drm_for_each_connector more drm: Amend connector list locking rules drm/radeon: Take all modeset locks for DP MST hotplug drm/i915: Take all modeset locks for DP MST hotplug drm: Check locking in drm_for_each_fb drm/i915: Use drm_for_each_fb in i915_debugfs.c drm: Check locking in drm_for_each_connector drm/fbdev-helper: Grab mode_config.mutex in drm_fb_helper_single_add_all_connectors drm/probe-helper: Grab mode_config.mutex in poll_init/enable drm: Add modeset object iterators drm: Simplify drm_for_each_legacy_plane arguments
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
crystalcove pmic support from Shobhit. Patch series has all acks/r-bs from other mainainers so ok to pull into drm-next. But I'm cc'ing all other maintainers as fyi and in case they want to pull it into their trees too to avoid conflicts. * tag 'topic/crc-pmic-2015-07-23' of git://anongit.freedesktop.org/drm-intel: mfd: Add GPIOLIB dependency if INTEL_SOC_PMIC is to be enabled drm/i915: Backlight control using CRC PMIC based PWM driver drm/i915: Use the CRC gpio for panel enable/disable pwm: crc: Add Crystalcove (CRC) PWM driver mfd: intel_soc_pmic_core: ADD PWM lookup table for CRC PMIC based PWM mfd: intel_soc_pmic_crc: Add PWM cell device for Crystalcove PMIC mfd: intel_soc_pmic_core: Add lookup table for Panel Control as GPIO signal gpiolib: Add support for removing registered consumer lookup table
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- prelim hw support dropped for skl after Damien fixed an ABI issue around planes - legacy modesetting is done using atomic infrastructure now (Maarten)! - more gen9 workarounds (Arun&Nick) - MOCS programming (cache control for better performance) for skl/bxt - vlv/chv dpll improvements (Ville) - PSR fixes from Rodrigo - fbc improvements from Paulo - plumb requests into execlist submit functions (Mika) - opregion code cleanup from Jani - resource streamer support from Abdiel for mesa - final fixes for 12bpc hdmi + enabling support from Ville drm-intel-next-2015-07-03: - dsi improvements (Gaurav) - bxt ddi dpll hw state readout (Imre) - chv dvfs support and overall wm improvements for both vlv and chv (Ville) - ppgtt polish from Mika and Michel - cdclk support for bxt (Bob Pauwe) - make frontbuffer tracking more precise - OLR removal (John Harrison) - per-ctx WA batch buffer support (Arun Siluvery) - remvoe KMS Kconfig option (Chris) - more hpd handling refactoring from Jani - use atomic states throughout modeset code and integrate with atomic plane update (Maarten) drm-intel-next-2015-06-19: - refactoring hpd irq handlers (Jani) - polish skl dpll code a bit (Damien) - dynamic cdclk adjustement (Ville & Mika) - fix up 12bpc hdmi and enable it for real again (Ville) - extend hsw cmd parser to be useful for atomic configuration (Franscico Jerez) - even more atomic conversion and rolling state handling out across modeset code from Maarten & Ander - fix DRRS idleness detection (Ramalingam) - clean up dsp address alignment handling (Ville) - some fbc cleanup patches from Paulo - prevent hard-hangs when trying to reset the gpu on skl (Mika) * tag 'drm-intel-next-2015-07-17' of git://anongit.freedesktop.org/drm-intel: (386 commits) drm/i915: Update DRIVER_DATE to 20150717 drm/i915/skl: Drop the preliminary_hw_support flag drm/i915/skl: Don't expose the top most plane on gen9 display drm/i915: Fix divide by zero on watermark update drm/i915: Invert fastboot check drm/i915: Clarify logic for initial modeset drm/i915: Unconditionally check gmch pfit state drm/i915: always disable irqs in intel_pipe_update_start drm/i915: Remove use of runtime pm in atomic commit functions drm/i915: Call plane update functions directly from intel_atomic_commit. drm/i915: Use full atomic modeset. drm/i915/gen9: Add WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken drm/i915/gen9: Add WaFlushCoherentL3CacheLinesAtContextSwitch workaround drm/i915/gen9: Add WaDisableCtxRestoreArbitration workaround drm/i915: Enable WA batch buffers for Gen9 drm/i915/gen9: Implement WaDisableKillLogic for gen 9 drm/i915: Use expcitly fixed type in compat32 structs drm/i915: Fix noatomic crtc disabling, v2. drm/i915: fill in more mode members drm/i915: Added BXT check in HAS_CORE_RING_FREQ macro ...
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
Update drm-misc pull request since the first one didn't go in yet. Few atomic helper patches, rejecting some old dri1 crap for modern drivers and a few trivial things on top. * tag 'topic/drm-misc-2015-07-23' of git://anongit.freedesktop.org/drm-intel: drm/mgag200: remove unneeded variable drm/mgag200: remove unused variables drm/atomic: Only update crtc->x/y if it's part of the state, v2. drm/fb: drop panic handling drm: Fix warning with make xmldocs caused by drm_irq.c drm/gem: rip out drm vma accounting for gem mmaps drm/fourcc: Add formats R8, RG88, GR88 drm/atomic: Cleanup on error properly in the atomic ioctl. drm: Update plane->fb also for page_flip drm: remove redundant code form drm_ioc32.c drm: reset empty state in transitional helpers drm/crtc-helper: Fixup error handling in drm_helper_crtc_mode_set drm/atomic: Update old_fb after setting a property. drm: Remove useless blank line drm: Reject DRI1 hw lock ioctl functions for kms drivers drm: Convert drm_legacy_ctxbitmap_init to void return type drm: Turn off Legacy Context Functions
-
git://people.freedesktop.org/~gabbayo/linuxDave Airlie authored
- Add Carrizo support for amdkfd, using the new amdgpu driver as the relevant kgd. The support includes interfaces with amdgpu both for gfx7 (Kaveri) and gfx8 (Carrizo). However, gfx7 interface is used for debugging purposes only, so amdkfd defaults to using radeon when Kaveri is installed. I would like to note that no new IOCTLs are being introduced, and there is no change in the current IOCTLs, as they are suited both for gfx7 and gfx8. * tag 'drm-amdkfd-next-2015-07-20' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Set correct doorbell packet type for Carrizo drm/amdkfd: Use generic defines in new amd headers drm/amdkfd: Implement create_map_queues() for Carrizo drm/amdkfd: fix runlist length calculation drm/amdkfd: Add support for VI in DQM drm/amdkfd: add support for VI in MQD manager drm/amdkfd: add CP HWS packet headers for VI drm/amdkfd: add supported CZ devices PCI IDs to amdkfd drm/amdkfd: Add dependency of DRM_AMDGPU to Kconfig drm/amdgpu: Add amdgpu <--> amdkfd gfx8 interface drm/amdgpu: add amdgpu <--> amdkfd gfx7 interface drm/amdgpu: Add H/W agnostic amdgpu <--> amdkfd interface drm/radeon: Modify kgd_engine_type enum to match CZ
-
- 22 Jul, 2015 11 commits
-
-
Daniel Vetter authored
Two nice things here: - drm_dev_register will truly register everything in the right order if the driver doesn't have a ->load callback. Before this we had to init the primary mode_group after the device nodes where already registered. - Less things to keep track of when reworking the connector locking, yay! Reviewed-by:
-
Daniel Vetter authored
It's been dead code since forever since mode groups haven't ever been implemented. On top of that it's also been non-functional since we only ever filtered the getresources ioctl and not any of the others nor the mode object lookup code. Given overwhelming evidence it looks like this isn't a feature we need, hence remove it. Reviewed-by:
-
Daniel Vetter authored
Remaining manual work in the drm core&helpers. Nothing special here, no surprises. Reviewed-by:
-
Daniel Vetter authored
This function takes two locks, both of them the wrong ones. This wasn't an oversight from my fb locking rework since both patches landed in parallel. We really only need fb_lock when walking that list, since everything we can reach from that is refcounted properly already. v2: Drop unused dev spotted by 0day. Cc: Rob Clark <robdclark@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: -
Daniel Vetter authored
Now that we also grab the connection_mutex and so fixed the race with atomic modeset we can use the iterator there too. The other special case is drm_connector_unplug_all which would have a locking inversion with the sysfs store/show functions if we'd grab the mode_config.mutex around the unplug. We could just grab connection_mutex instead, but that's a bit too much a dirty trick for my taste. Also it's only used by udl, which doesn't do any other kind of connector hotplugging, so should be race-free. Hence just stick with a comment for now. Reviewed-by:
-
Daniel Vetter authored
Now that dp mst hotplug takes all locks we can amend the locking rules for the iterators. This is needed before we can roll these out in the atomic code to avoid getting burried in WARNINGs. v2: Rebase onto the extracted list locking assert and add a comment to explain the rules. v3: Fixup German->English translation fail in the comment. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Daniel Vetter authored
Similar with the i915 take all modeset locks for mst hotplug. This is needed to make sure radeon holds both mode_config.mutex and mode_config.connection_mutex when updating the connector_list, which is the new (interim) locking regime we want for that. Reviewed-by:
-
Daniel Vetter authored
While auditing various users of the connector/encoder lists I realized that the atomic code is a very prolific user of them. And it only ever grabs the mode_config->connection_mutex, but not the mode_config->mutex like all the other code walking encoder/connector lists. The problem is that we can't grab the mode_config.mutex late in atomic code since that would lead to locking inversions. And we don't want to grab it unconditionally like the legacy set_config modeset path since that would render all the fine-grained locking moot. Instead just grab more locks in the dp mst hotplug code. Note that drm_connector_init (which is the one adding the connector to these lists) already uses drm_modeset_lock_all. The other reason for grabbing all locks is that the dpms off in the unplug function amounts to a modeset, so better to take all required locks for that. Reviewed-by:
-
Daniel Vetter authored
Ever since framebuffers are reference counted we have a special lock for the global fb list. Make sure users of that list do hold that lock when using the new iterators. Reviewed-by:
-
Daniel Vetter authored
Just so I have a user for this macro. v2: Use the right macro - somehow I thought gcc should scream at me, but list_for_each isn't really typesafe unfortunately. Spotted by Ville. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
Because of DP MST connectors can now be hotplugged and we must hold the right lock when walking the connector lists. Enforce this by checking the locking in our shiny new list walking macros. v2: Extract the locking check into a small static inline helper to help readability. This will be more important when we make the read list access rules more complicated in later patches. Inspired by comments from Chris. Unfortunately, due to header loops around the definition of struct drm_device the function interface is a bit funny. v3: Encoders aren't hotadded/removed. For each dp mst encoder we statically create one fake encoder per pipe so that we can support as many mst sinks as the hw can (Dave). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Airlie <airlied@redhat.com> Reviewed-by:
-
