- 26 Apr, 2023 12 commits
-
-
Jeff Layton authored
It's easily possible for the server to have an outstanding lock when we go to shut down. When that happens, we often get a warning like this in the kernel log: lockd: couldn't shutdown host module for net f0000000! This is because the shutdown procedures skip removing any hosts that still have outstanding resources (locks). Eventually, things seem to get cleaned up anyway, but the log message is unsettling, and server shutdown doesn't seem to be working the way it was intended. Ensure that we tear down any resources held on behalf of a client when tearing one down for server shutdown. Reported-by:Yongcheng Yang <yoyang@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2063818Signed-off-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Chuck Lever <chuck.lever@oracle.com>
-
Chuck Lever authored
While we were converting the nfs4_file hashtable to use the kernel's resizable hashtable data structure, Neil Brown observed that the list variant (rhltable) would be better for managing nfsd_file items as well. The nfsd_file hash table will contain multiple entries for the same inode -- these should be kept together on a list. And, it could be possible for exotic or malicious client behavior to cause the hash table to resize itself on every insertion. A nice simplification is that rhltable_lookup() can return a list that contains only nfsd_file items that match a given inode, which enables us to eliminate specialized hash table helper functions and use the default functions provided by the rhashtable implementation). Since we are now storing nfsd_file items for the same inode on a single list, that effectively reduces the number of hash entries that have to be tracked in the hash table. The mininum bucket count is therefore lowered. Light testing with fstests generic/531 show no regressions. Suggested-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
Jeff Layton authored
On most filesystems, there is no reason to delay reaping an nfsd_file just because its underlying inode is still under writeback. nfsd just relies on client activity or the local flusher threads to do writeback. The main exception is NFS, which flushes all of its dirty data on last close. Add a new EXPORT_OP_FLUSH_ON_CLOSE flag to allow filesystems to signal that they do this, and only skip closing files under writeback on such filesystems. Also, remove a redundant NULL file pointer check in nfsd_file_check_writeback, and clean up nfs's export op flag definitions. Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Jeff Layton authored
Signed-off-by:
-
Jeff Layton authored
The last thing that filp_close does is an fput, so don't bother taking and putting the extra reference. Signed-off-by:
-
Jeff Layton authored
David Howells mentioned that he found this bit of code confusing, so sprinkle in some comments to clarify. Reported-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Jeff Layton authored
An error from break_lease is non-fatal, so we needn't destroy the nfsd_file in that case. Just put the reference like we normally would and return the error. Signed-off-by:
-
Jeff Layton authored
test_bit returns bool, so we can just compare the result of that to the key->gc value without the "!!". Signed-off-by:
-
Jeff Layton authored
Since v4 files are expected to be long-lived, there's little value in closing them out of the cache when there is conflicting access. Change the comparator to also match the gc value in the key. Change both of the current users of that key to set the gc value in the key to "true". Signed-off-by:
-
Jeff Layton authored
Signed-off-by:
-
Paolo Abeni authored
commit 4bb7aac7 ("net: phy: fix circular LEDS_CLASS dependencies") solved a build failure, but introduces a new config knob with a default 'y' value: PHYLIB_LEDS. The latter is against the current new config policy. The exception was raised to allow the user to catch bad configurations without led support. Anyway the current definition of PHYLIB_LEDS does not fit the above goal: if LEDS_CLASS is disabled, the new config will be available only with PHYLIB disabled, too. Hide the mentioned config, to preserve the randconfig testing done so far, while respecting the mentioned policy. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Suggested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/d82489be8ed911c383c3447e9abf469995ccf39a.1682496488.git.pabeni@redhat.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni authored
No conflicts. Signed-off-by:
-
- 25 Apr, 2023 26 commits
-
-
wuych authored
Pointer variables of void * type do not require type cast. Signed-off-by:
wuych <yunchuan@nfschina.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kuniyuki Iwashima authored
syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY skbs. We can reproduce the problem with these sequences: sk = socket(AF_INET, SOCK_DGRAM, 0) sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE) sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1) sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53)) sk.close() sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct ubuf_info_msgzc indirectly holds a refcnt of the socket. When the skb is sent, __skb_tstamp_tx() clones it and puts the clone into the socket's error queue with the TX timestamp. When the original skb is received locally, skb_copy_ubufs() calls skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt. This additional count is decremented while freeing the skb, but struct ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is not called. The last refcnt is not released unless we retrieve the TX timestamped skb by recvmsg(). Since we clear the error queue in inet_sock_destruct() after the socket's refcnt reaches 0, there is a circular dependency. If we close() the socket holding such skbs, we never call sock_put() and leak the count, sk, and skb. TCP has the same problem, and commit e0c8bccd ("net: stream: purge sk_error_queue in sk_stream_kill_queues()") tried to fix it by calling skb_queue_purge() during close(). However, there is a small chance that skb queued in a qdisc or device could be put into the error queue after the skb_queue_purge() call. In __skb_tstamp_tx(), the cloned skb should not have a reference to the ubuf to remove the circular dependency, but skb_clone() does not call skb_copy_ubufs() for zerocopy skb. So, we need to call skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs(). [0]: BUG: memory leak unreferenced object 0xffff88800c6d2d00 (size 1152): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................ 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024 [<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083 [<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline] [<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245 [<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515 [<00000000b9b11231>] sock_create net/socket.c:1566 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline] [<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636 [<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline] [<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline] [<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd BUG: memory leak unreferenced object 0xffff888017633a00 (size 240): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m..... backtrace: [<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497 [<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline] [<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596 [<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline] [<00000000be626478>] msg_zerocopy_realloc+0x1ce/0x7f0 net/core/skbuff.c:1370 [<00000000cbfc9870>] __ip_append_data+0x2adf/0x3b30 net/ipv4/ip_output.c:1037 [<0000000089869146>] ip_make_skb+0x26c/0x2e0 net/ipv4/ip_output.c:1652 [<00000000098015c2>] udp_sendmsg+0x1bac/0x2390 net/ipv4/udp.c:1253 [<0000000045e0e95e>] inet_sendmsg+0x10a/0x150 net/ipv4/af_inet.c:819 [<000000008d31bfde>] sock_sendmsg_nosec net/socket.c:714 [inline] [<000000008d31bfde>] sock_sendmsg+0x141/0x190 net/socket.c:734 [<0000000021e21aa4>] __sys_sendto+0x243/0x360 net/socket.c:2117 [<00000000ac0af00c>] __do_sys_sendto net/socket.c:2129 [inline] [<00000000ac0af00c>] __se_sys_sendto net/socket.c:2125 [inline] [<00000000ac0af00c>] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2125 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f214f915 ("tcp: enable MSG_ZEROCOPY") Fixes: b5947e5d ("udp: msg_zerocopy") Reported-by:syzbot <syzkaller@googlegroups.com> Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Gencen Gan authored
After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Gan Gecen <gangecen@hust.edu.cn> Reviewed-by:
Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by:
-
Christian Marangi authored
Fix inconsistent indeinting in m88e1318_led_blink_set reported by kernel test robot, probably done by the presence of an if condition dropped in later revision of the same code. Reported-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202304240007.0VEX8QYG-lkp@intel.com/ Fixes: ea9e8648 ("net: phy: marvell: Implement led_blink_set()") Signed-off-by:
Christian Marangi <ansuelsmth@gmail.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
When the action of an xdp program was XDP_TX, lan966x was creating a xdp_frame and use this one to send the frame back. But it is also possible to send back the frame without needing a xdp_frame, because it is possible to send it back using the page. And then once the frame is transmitted is possible to use directly page_pool_recycle_direct as lan966x is using page pools. This would save some CPU usage on this path, which results in higher number of transmitted frames. Bellow are the statistics: Frame size: Improvement: 64 ~8% 256 ~11% 512 ~8% 1000 ~0% 1500 ~0% Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://lore.kernel.org/r/20230422142344.3630602-1-horatiu.vultur@microchip.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2023-04-24 We've added 5 non-merge commits during the last 3 day(s) which contain a total of 7 files changed, 87 insertions(+), 44 deletions(-). The main changes are: 1) Workaround for bpf iter selftest due to lack of subprog support in precision tracking, from Andrii. 2) Disable bpf_refcount_acquire kfunc until races are fixed, from Dave. 3) One more test_verifier test converted from asm macro to asm in C, from Eduard. 4) Fix build with NETFILTER=y INET=n config, from Florian. 5) Add __rcu_read_{lock,unlock} into deny list, from Yafang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: selftests/bpf: avoid mark_all_scalars_precise() trigger in one of iter tests bpf: Add __rcu_read_{lock,unlock} into btf id deny list bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed selftests/bpf: verifier/prevent_map_lookup converted to inline assembly bpf: fix link failure with NETFILTER=y INET=n ==================== Link: https://lore.kernel.org/r/20230425005648.86714-1-alexei.starovoitov@gmail.comSigned-off-by: -
Jakub Kicinski authored
Gerhard Engleder says: ==================== tsnep: XDP socket zero-copy support Implement XDP socket zero-copy support for tsnep driver. I tried to follow existing drivers like igc as far as possible. But one main difference is that tsnep does not need any reconfiguration for XDP BPF program setup. So I decided to keep this behavior no matter if a XSK pool is used or not. As a result, tsnep starts using the XSK pool even if no XDP BPF program is available. Another difference is that I tried to prevent potentially failing allocations during XSK pool setup. E.g. both memory models for page pool and XSK pool are registered all the time. Thus, XSK pool setup cannot end up with not working queues. Some prework is done to reduce the last two XSK commits to actual XSK changes. ==================== Link: https://lore.kernel.org/r/20230421194656.48063-1-gerhard@engleder-embedded.comSigned-off-by:
-
Gerhard Engleder authored
Send and complete XSK pool frames within TX NAPI context. NAPI context is triggered by ndo_xsk_wakeup. Test results with A53 1.2GHz: xdpsock txonly copy mode, 64 byte frames: pps pkts 1.00 tx 284,409 11,398,144 Two CPUs with 100% and 10% utilization. xdpsock txonly zero-copy mode, 64 byte frames: pps pkts 1.00 tx 511,929 5,890,368 Two CPUs with 100% and 1% utilization. xdpsock l2fwd copy mode, 64 byte frames: pps pkts 1.00 rx 248,985 7,315,885 tx 248,921 7,315,885 Two CPUs with 100% and 10% utilization. xdpsock l2fwd zero-copy mode, 64 byte frames: pps pkts 1.00 rx 254,735 3,039,456 tx 254,735 3,039,456 Two CPUs with 100% and 4% utilization. Packet rate increases and CPU utilization is reduced in both cases. Signed-off-by:Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
-
Gerhard Engleder authored
Add support for XSK zero-copy to RX path. The setup of the XSK pool can be done at runtime. If the netdev is running, then the queue must be disabled and enabled during reconfiguration. This can be done easily with functions introduced in previous commits. A more important property is that, if the netdev is running, then the setup of the XSK pool shall not stop the netdev in case of errors. A broken netdev after a failed XSK pool setup is bad behavior. Therefore, the allocation and setup of resources during XSK pool setup is done only before any queue is disabled. Additionally, freeing and later allocation of resources is eliminated in some cases. Page pool entries are kept for later use. Two memory models are registered in parallel. As a result, the XSK pool setup cannot fail during queue reconfiguration. In contrast to other drivers, XSK pool setup and XDP BPF program setup are separate actions. XSK pool setup can be done without any XDP BPF program. The XDP BPF program can be added, removed or changed without any reconfiguration of the XSK pool. Test results with A53 1.2GHz: xdpsock rxdrop copy mode, 64 byte frames: pps pkts 1.00 rx 856,054 10,625,775 Two CPUs with both 100% utilization. xdpsock rxdrop zero-copy mode, 64 byte frames: pps pkts 1.00 rx 889,388 4,615,284 Two CPUs with 100% and 20% utilization. Packet rate increases and CPU utilization is reduced. 100% CPU load seems to the base load. This load is consumed by ksoftirqd just for dropping the generated packets without xdpsock running. Using batch API reduced CPU utilization slightly, but measurements are not stable enough to provide meaningful numbers. Signed-off-by: -
Gerhard Engleder authored
The function tsnep_rx_poll() is already pretty long and the skb receive action can be reused for XSK zero-copy support. Move page based skb receive to separate function. Signed-off-by:
-
Gerhard Engleder authored
Move queue enable and disable code to separate functions. This way the activation and deactivation of the queues are defined actions, which can be used in future execution paths. This functions will be used for the queue reconfiguration at runtime, which is necessary for XSK zero-copy support. Signed-off-by:
-
Gerhard Engleder authored
Make initialization of TX and RX queues less dynamic by moving some initialization from netdev open/close to device probing. Additionally, move some initialization code to separate functions to enable future use in other execution paths. This is done as preparation for queue reconfigure at runtime, which is necessary for XSK zero-copy support. Signed-off-by:
-
Gerhard Engleder authored
TX/RX ring size is static and power of 2 to enable compiler to optimize modulo operation to mask operation. Make this optimization already in the code and don't rely on the compiler. CPU utilisation during high packet rate has not changed. So no performance improvement has been measured. But it is best practice to prevent modulo operations. Suggested-by:
-
Alexander Stein authored
Up to 4 LEDs can be attached to the PHY, add support for setting brightness manually. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by:
-
Alexander Stein authored
'reg' is always encoded in 32 bits, thus it has to be read using the function with the corresponding bit width. Fixes: 01e5b728 ("net: phy: Add a binding for PHY LEDs") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20230424141648.317944-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
Jianuo Kuang authored
Smatch complains that: nfcsim_debugfs_init_dev() warn: 'dev_dir' is an error pointer or valid According to the documentation of the debugfs_create_dir() function, there is no need to check the return value of this function. Just delete the dead code. Signed-off-by:
Jianuo Kuang <u202110722@hust.edu.cn> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230424024140.34607-1-u202110722@hust.edu.cnSigned-off-by:
-
wuych authored
Pointer variables of void * type do not require type cast. Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
-
Jakub Kicinski authored
SET_COALESCE may change operation mode and parameters in one call. Changing operation mode may cause the driver to reset the parameter values to what is a reasonable default for new operation mode. Since driver does not know which parameters come from user and which are echoed back from ->get, driver may ignore the parameters when switching operation modes. This used to be inevitable for ioctl() but in netlink we know which parameters are actually specified by the user. We could inform which parameters were set by the user but this would lead to a lot of code duplication in the drivers. Instead try to call the drivers twice if both mode and params are changed. The set method already checks if any params need updating so in case the driver did the right thing the first time around - there will be no second call to it's ->set method (only an extra call to ->get()). For mlx5 for example before this patch we'd see: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 3 rx-frames: 32 tx-usecs: 16 tx-frames: 32 [...] After the change: # ethtool -C eth0 adaptive-rx on adaptive-tx on # ethtool -C eth0 adaptive-rx off adaptive-tx off \ tx-usecs 123 rx-usecs 123 Adaptive RX: off TX: off rx-usecs: 123 rx-frames: 32 tx-usecs: 123 tx-frames: 32 [...] This only works for netlink, so it's a small discrepancy between netlink and ioctl(). Since we anticipate most users to move to netlink I believe it's worth making their lives easier. Link: https://lore.kernel.org/r/20230420233302.944382-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Haiyang Zhang says: ==================== Update coding style and check alloc_frag Follow up patches for the jumbo frame support. As suggested by Jakub Kicinski, update coding style, and check napi_alloc_frag for possible fallback to single pages. ==================== Link: https://lore.kernel.org/r/1682096818-30056-1-git-send-email-haiyangz@microsoft.comSigned-off-by:
-
Haiyang Zhang authored
netdev/napi_alloc_frag() may fall back to single page which is smaller than the requested size. Add error checking to avoid memory overwritten. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Haiyang Zhang authored
Rename mana_refill_rxoob for naming consistency. And remove some empty lines between function call and error checking. Signed-off-by:
-
Jakub Kicinski authored
Lorenzo Bianconi says: ==================== add page_pool support for page recycling in veth driver Introduce page_pool support in veth driver in order to recycle pages in veth_convert_skb_to_xdp_buff routine and avoid reallocating the skb through the page allocator when we run a xdp program on the device and we receive skbs from the stack. ==================== Link: https://lore.kernel.org/r/cover.1682188837.git.lorenzo@kernel.orgSigned-off-by:
-
Lorenzo Bianconi authored
Introduce page_pool stats support to report info about local page_pool through ethtool Tested-by:
Maryam Tahhan <mtahhan@redhat.com> Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Introduce page_pool support in veth driver in order to recycle pages in veth_convert_skb_to_xdp_buff routine and avoid reallocating the skb through the page allocator. The patch has been tested sending tcp traffic to a veth pair where the remote peer is running a simple xdp program just returning xdp_pass: veth upstream codebase: MTU 1500B: ~ 8Gbps MTU 8000B: ~ 13.9Gbps veth upstream codebase + pp support: MTU 1500B: ~ 9.2Gbps MTU 8000B: ~ 16.2Gbps Tested-by:
-
Kuniyuki Iwashima authored
Brad Spencer provided a detailed report [0] that when calling getsockopt() for AF_NETLINK, some SOL_NETLINK options set only 1 byte even though such options require at least sizeof(int) as length. The options return a flag value that fits into 1 byte, but such behaviour confuses users who do not initialise the variable before calling getsockopt() and do not strictly check the returned value as char. Currently, netlink_getsockopt() uses put_user() to copy data to optlen and optval, but put_user() casts the data based on the pointer, char *optval. As a result, only 1 byte is set to optval. To avoid this behaviour, we need to use copy_to_user() or cast optval for put_user(). Note that this changes the behaviour on big-endian systems, but we document that the size of optval is int in the man page. $ man 7 netlink ... Socket options To set or get a netlink socket option, call getsockopt(2) to read or setsockopt(2) to write the option with the option level argument set to SOL_NETLINK. Unless otherwise noted, optval is a pointer to an int. Fixes: 9a4595bc ("[NETLINK]: Add set/getsockopt options to support more than 32 groups") Fixes: be0c22a4 ("netlink: add NETLINK_BROADCAST_ERROR socket option") Fixes: 38938bfe ("netlink: add NETLINK_NO_ENOBUFS socket flag") Fixes: 0a6a3a23 ("netlink: add NETLINK_CAP_ACK socket option") Fixes: 2d4bc933 ("netlink: extended ACK reporting") Fixes: 89d35528 ("netlink: Add new socket option to enable strict checking on dumps") Reported-by:Brad Spencer <bspencer@blackberry.com> Link: https://lore.kernel.org/netdev/ZD7VkNWFfp22kTDt@datsun.rim.net/Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Link: https://lore.kernel.org/r/20230421185255.94606-1-kuniyu@amazon.comSigned-off-by:
-
Andrii Nakryiko authored
iter_pass_iter_ptr_to_subprog subtest is relying on actual array size being passed as subprog parameter. This combined with recent fixes to precision tracking in conditional jumps ([0]) is now causing verifier to backtrack all the way to the point where sum() and fill() subprogs are called, at which point precision backtrack bails out and forces all the states to have precise SCALAR registers. This in turn causes each possible value of i within fill() and sum() subprogs to cause a different non-equivalent state, preventing iterator code to converge. For now, change the test to assume fixed size of passed in array. Once BPF verifier supports precision tracking across subprogram calls, these changes will be reverted as unnecessary. [0] 71b547f5 ("bpf: Fix incorrect verifier pruning due to missing register precision taints") Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230424235128.1941726-1-andrii@kernel.orgSigned-off-by:
Alexei Starovoitov <ast@kernel.org>
-
- 24 Apr, 2023 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Reduce jumpstack footprint: Stash chain in last rule marker in blob for tracing. Remove last rule and chain from jumpstack. From Florian Westphal. 2) nf_tables validates all tables before committing the new rules. Unfortunately, this has two drawbacks: - Since addition of the transaction mutex pernet state gets written to outside of the locked section from the cleanup callback, this is wrong so do this cleanup directly after table has passed all checks. - Revalidate tables that saw no changes. This can be avoided by keeping the validation state per table, not per netns. From Florian Westphal. 3) Get rid of a few redundant pointers in the traceinfo structure. The three removed pointers are used in the expression evaluation loop, so gcc keeps them in registers. Passing them to the (inlined) helpers thus doesn't increase nft_do_chain text size, while stack is reduced by another 24 bytes on 64bit arches. From Florian Westphal. 4) IPVS cleanups in several ways without implementing any functional changes, aside from removing some debugging output: - Update width of source for ip_vs_sync_conn_options The operation is safe, use an annotation to describe it properly. - Consistently use array_size() in ip_vs_conn_init() It seems better to use helpers consistently. - Remove {Enter,Leave}Function. These seem to be well past their use-by date. - Correct spelling in comments. From Simon Horman. 5) Extended netlink error report for netdevice in flowtables and netdev/chains. Allow for incrementally add/delete devices to netdev basechain. Allow to create netdev chain without device. * tag 'nf-next-23-04-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow to create netdev chain without device netfilter: nf_tables: support for deleting devices in an existing netdev chain netfilter: nf_tables: support for adding new devices to an existing netdev chain netfilter: nf_tables: rename function to destroy hook list netfilter: nf_tables: do not send complete notification of deletions netfilter: nf_tables: extended netlink error reporting for netdevice ipvs: Correct spelling in comments ipvs: Remove {Enter,Leave}Function ipvs: Consistently use array_size() in ip_vs_conn_init() ipvs: Update width of source for ip_vs_sync_conn_options netfilter: nf_tables: do not store rule in traceinfo structure netfilter: nf_tables: do not store verdict in traceinfo structure netfilter: nf_tables: do not store pktinfo in traceinfo structure netfilter: nf_tables: remove unneeded conditional netfilter: nf_tables: make validation state per table netfilter: nf_tables: don't write table validation state without mutex netfilter: nf_tables: don't store chain address on jump netfilter: nf_tables: don't store address of last rule on jump netfilter: nf_tables: merge nft_rules_old structure and end of ruleblob marker ==================== Link: https://lore.kernel.org/r/20230421235021.216950-1-pablo@netfilter.orgSigned-off-by: -
Yafang Shao authored
The tracing recursion prevention mechanism must be protected by rcu, that leaves __rcu_read_{lock,unlock} unprotected by this mechanism. If we trace them, the recursion will happen. Let's add them into the btf id deny list. When CONFIG_PREEMPT_RCU is enabled, it can be reproduced with a simple bpf program as such: SEC("fentry/__rcu_read_lock") int fentry_run() { return 0; } Signed-off-by:Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230424161104.3737-2-laoar.shao@gmail.comSigned-off-by:
-
