It is useful be able to configure port policers on a switch to accept
frames of various sizes:

- Increase the MTU for better throughput from the default of 1500 if it
  is known that there is no 10/100 Mbps device in the network.
- Decrease the MTU to limit the latency of high-priority frames under
  congestion, or work around various network segments that add extra
  headers to packets which can't be fragmented.

For DSA slave ports, this is mostly a pass-through callback, called
through the regular ndo ops and at probe time (to ensure consistency
across all supported switches).

The CPU port is called with an MTU equal to the largest configured MTU
of the slave ports. The assumption is that the user might want to
sustain a bidirectional conversation with a partner over any switch
port.

The DSA master is configured the same as the CPU port, plus the tagger
overhead. Since the MTU is by definition L2 payload (sans Ethernet
header), it is up to each individual driver to figure out if it needs to
do anything special for its frame tags on the CPU port (it shouldn't
except in special cases). So the MTU does not contain the tagger
overhead on the CPU port.
However the MTU of the DSA master, minus the tagger overhead, is used as
a proxy for the MTU of the CPU port, which does not have a net device.
This is to avoid uselessly calling the .change_mtu function on the CPU
port when nothing should change.

So it is safe to assume that the DSA master and the CPU port MTUs are
apart by exactly the tagger's overhead in bytes.

Some changes were made around dsa_master_set_mtu(), function which was
now removed, for 2 reasons:
  - dev_set_mtu() already calls dev_validate_mtu(), so it's redundant to
    do the same thing in DSA
  - __dev_set_mtu() returns 0 if ops->ndo_change_mtu is an absent method
That is to say, there's no need for this function in DSA, we can safely
call dev_set_mtu() directly, take the rtnl lock when necessary, and just
propagate whatever errors get reported (since the user probably wants to
be informed).

Some inspiration (mainly in the MTU DSA notifier) was taken from a
vaguely similar patch from Murali and Florian, who are credited as
co-developers down below.
Co-developed-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Co-developed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change DMA descriptor length to handle jumbo frames beyond 8192 bytes.
Also update jumbo frame max size to include FCS, the DMA packet length
received includes FCS.
Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Reviewed-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BCM7XX PHY family requires special configuration to pass jumbo
frames. Do that during initial PHY setup.
Signed-off-by: Murali Krishna Policharla <murali.policharla@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-2020-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.7

Third set of patches for v5.7. Nothing really special this time,
business as usual.

When pulling this to net-next there's again a conflict in:

drivers/net/wireless/intel/iwlwifi/pcie/drv.c

To solve this drop these three lines from the conflict (the first hunk
from "HEAD") as the whole AX200 block was moved above in the same
file:

	IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name),
	IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name),
	IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name),

And keep all the __IWL_DEV_INFO() entries (the second hunk). In other
words, take everything from wireless-drivers-next. When running 'git
diff' after the resolution the output should be empty.

Major changes:

brcmfmac

* add USB autosuspend support

ath11k

* handle RX fragments

* enable PN offload

* add support for HE BSS color

iwlwifi

* support new FW API version

* support for EDCA measurements

* new scan API features

* enable new firmware debugging code
====================

Kalle gave me directions on how to resolve the iwlwifi conflict
as follows:

====================
When pulling this to net-next there's again a conflict in:

drivers/net/wireless/intel/iwlwifi/pcie/drv.c

To solve this drop these three lines from the conflict (the first hunk
from "HEAD") as the whole AX200 block was moved above in the same
file:

	IWL_DEV_INFO(0x2723, 0x1653, iwl_ax200_cfg_cc, iwl_ax200_killer_1650w_name),
	IWL_DEV_INFO(0x2723, 0x1654, iwl_ax200_cfg_cc, iwl_ax200_killer_1650x_name),
	IWL_DEV_INFO(0x2723, IWL_CFG_ANY, iwl_ax200_cfg_cc, iwl_ax200_name),

And keep all the __IWL_DEV_INFO() entries (the second hunk). In other
words, take everything from wireless-drivers-next. When running 'git
diff' after the resolution the output should be empty.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: updates 2020-03-27

please apply the following patch series for qeth to netdev's net-next
tree.

Spring clean edition:
- remove one sysfs attribute that was never put in use,
- make support for OSN and OSX devices optional, and
- probe for removal of the obsolete OSN support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

OSN devices currently spend an awful long time in qeth_l2_set_online()
until various unsupported HW cmds time out. This has been broken for
over two years, ever since
commit d22ffb5a ("s390/qeth: fix IPA command submission race")
triggered a FW bug in cmd processing.
Prior to commit 782e4a79 ("s390/qeth: don't poll for cmd IO completion"),
this wait for timeout would have even been spent busy-polling.

The offending patch was picked up by stable and all relevant distros,
and yet noone noticed.
OSN setups only ever worked in combination with an out-of-tree blob, and
the last machine that even offered HW with OSN support was released back
in 2015.

Rather than attempting to work-around this FW issue for no actual gain,
add a deprecation warning so anyone who still wants to maintain this
part of the code can speak up. Else rip it all out in 2021.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The last machine generation that supports OSN is z13, and OSX is only
supported up to z14. Allow users and distros to decide whether they
still need support for these device types.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ever since commit 4a71df50 ("qeth: new qeth device driver") introduced
this attribute, it can be read & written but has no actual effect.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vasundhara Volam says:

====================
bnxt_en: Updates to devlink info_get cb

This series adds support for a generic macro to devlink info_get cb.
Adds support for fw.mgmt.api and board.id info to bnxt_en driver info_get
cb. Also, updates the devlink-info.rst and bnxt.rst documentation
accordingly.

This series adds a patch to fix few macro names that maps to bnxt_en
firmware versions.

v1->v2: Remove ECN dev param, base_mh_addr and serial number info support
in this series.
Rename drv.spec macro to fw.api.
---
v2->v3: Remove hw.addr info as it is per netdev but not per device info.
---
v3->v4: Rename "fw.api" to "fw.mgmt.api".
Also, add a patch that modifies few macro names in info_get command,
to match the devlink documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix macro names to report fw.mgmt and fw.ncsi versions to match the
devlink documentation.

Example display after fixes:

$ devlink dev info pci/0000:af:00.0
pci/0000:af:00.0:
  driver bnxt_en
  serial_number B0-26-28-FF-FE-25-84-20
  versions:
      fixed:
        board.id BCM957454A4540
        asic.id C454
        asic.rev 1
      running:
        fw 216.1.154.0
        fw.psid 0.0.0
        fw.mgmt 216.1.146.0
        fw.mgmt.api 1.10.1
        fw.ncsi 864.0.44.0
        fw.roce 216.1.16.0

Fixes: 9599e036 ("bnxt_en: Add support for devlink info command")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add part number info from the vital product data to info_get command
via devlink tool. Update bnxt.rst documentation as well.

Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store the part number and serial number information from VPD in
the bnxt structure. Follow up patch will add the support to display
the information via devlink command.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new macro for serial number keyword.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Display the minimum version of firmware interface spec supported
between driver and firmware. Also update bnxt.rst documentation file.
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add definition and documentation for the new generic info
"fw.mgmt.api". This macro specifies the version of the software
interfaces between driver and firmware.

Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Various static checkers fixes

Jakub told me he gets some warnings with W=1, so I decided to check with
sparse, smatch and coccinelle as well. This patch set fixes all the
issues found. None are actual bugs / regressions and therefore not
targeted at net.

Patches #1-#2 add missing kernel-doc comments.

Patch #3 removes dead code.

Patch #4 reworks the ACL code to avoid defining a static variable in a
header file.

Patch #5 removes unnecessary conversion to bool that coccinelle warns
about.

Patch #6 avoids false-positive uninitialized symbol errors emitted by
smatch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppress the following smatch errors. None of these are actually
possible with current code paths.

drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220
mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol 'saddrp'.
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1220
mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol
'saddr_len'.
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1221
mlxsw_sp_ipip_entry_find_decap() error: uninitialized symbol
'saddr_prefix_len'.

drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:1390
mlxsw_sp_netdevice_ipip_ol_reg_event() error: uninitialized symbol
'ipipt'.

drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3255
mlxsw_sp_nexthop_group_update() error: uninitialized symbol 'err'.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppress following warning from coccinelle:

drivers/net/ethernet/mellanox/mlxsw//switchx2.c:183:63-68: WARNING:
conversion to bool not needed here
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The static array 'mlxsw_afk_element_infos' in 'core_acl_flex_keys.h' is
copied to each file that includes the header, but not all use it. This
results in the following warnings when compiling with W=1:

drivers/net/ethernet/mellanox/mlxsw//core_acl_flex_keys.h:76:44:
warning: ‘mlxsw_afk_element_infos’ defined but not used
[-Wunused-const-variable=]

One way to suppress the warning is to mark the array with
'__maybe_unused', but another option is to remove it from the header
file entirely.

Change 'struct mlxsw_afk_element_inst' to store the key to the array
('element') instead of the array value keyed by 'element'. Adjust the
different users accordingly.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In merge commit 50853808 ("Merge branch
'mlxsw-Prepare-for-VLAN-aware-bridge-w-VxLAN'") I flipped mlxsw to use
emulated 802.1Q FIDs and correspondingly emulated VLAN RIFs. This means
that the non-emulated variants are no longer used. Remove them and
suppress the following warnings when compiling with W=1:

drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:7572:38: warning:
‘mlxsw_sp_rif_vlan_ops’ defined but not used [-Wunused-const-variable=]

drivers/net/ethernet/mellanox/mlxsw//spectrum_fid.c:584:41: warning:
‘mlxsw_sp_fid_8021q_family’ defined but not used
[-Wunused-const-variable=]
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppress following warnings when compiling with W=1:

drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning:
Function parameter or member 'mlxsw_sp' not described in
'__mlxsw_sp_ipip_entry_update_tunnel'
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning:
Function parameter or member 'ipip_entry' not described in
'__mlxsw_sp_ipip_entry_update_tunnel'
drivers/net/ethernet/mellanox/mlxsw//spectrum_router.c:1552: warning:
Function parameter or member 'extack' not described in
'__mlxsw_sp_ipip_entry_update_tunnel'
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Suppress following warning when compiling with W=1:

drivers/net/ethernet/mellanox/mlxsw//i2c.c:78: warning: Function
parameter or member 'cmd' not described in 'mlxsw_i2c'
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'iwlwifi-next-for-kalle-2020-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Second set of iwlwifi patches intended for v5.7

* Refactoring of the device selection algorithms continues;
* Improvement in the initialization fo SoC-based devices;
* Support for FW scan API;
* Some additions to our FW debuggging capabilities;
* More refactoring of the device selection algorithms;
* Support new FW API version;
* Support for EDCA measurements;
* New scan API features;
* Enable new debugging code;
* Some other small fixes and clean-ups;

Some of the places using this want the newline, but not all,
so remove the newline from it and generate it in the debugfs
files where it's desired.

The effect of this is not printing double newlines in debug
log messages.

Change-Id: Ia59b0abbef16b6783fcabc095c5fde16bd047a26
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

There's no need for this to be exposed outside of the tx.c
file, make it static.

Change-Id: I41d40008311b108d0578bd2ec73c5477e700a839
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Start supporting API version 53 for 22000 series.

Change-Id: I5725e46394f3f53c3069723fd513cc53c7df383d
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

This is used to initialize the default value, but refers back
to the value itself, essentially leading to a
	val = val
assignment at init time ... that's useless, remove it and use
_NODEF.

Change-Id: I725923016563c34ce2fa057bf7c12984e1041c49
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Now that YoYo is more mature, we can enable it by default, so we
collect data in the new way.

Change-Id: Ic1a147f935286b085ca8bdb248a7493b7c6341ea
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

The FW changed the maximum number of scan offload profiles to 8 in new
APIs.  Support it by changing the scan_offload_profile_cfg struct to be
more dynamic, so we can reuse most of the code and only change size of
the profiles array.

Change-Id: I65210cf541af46e2675a8c764d5871f7f5b070d6
Signed-off-by: Tova Mussai <tova.mussai@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

When we have an assert during D3 we want to dump the internal
buffer memory even if are we working in DRAM debug mode.  We should not
block dumping it.

Change-Id: I69aad2d4904c4f8bb653c61e8781a2e07780054f
Signed-off-by: Rotem Saado <rotem.saado@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

We don't support the FPGA versions of this card combination anymore.
Remove the cfg mangling that tries to load it and all the relevant
structures.

Change-Id: I190652101afcab682cfba873d062992f11efca32
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

We don't support QnJ HR STEP A anymore.  Remove the structures we used
for it.

Change-Id: I0dfd88232bdc8ff2dd9c4368b8ed9a0c40c86bc8
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

A couple of SoCs, which can be recognized by PCI device IDs 0xA0F0 and
0x43F0, need a longer wait for the xtal to stabilize.  To handle this,
add a new trans_cfg structure for Qu devices with a larger
xtal_latency value and apply them to the devices recognized by these
IDs.  Also add a flag that allows us to inform the FW that the low
latency xtal should be used.

Change-Id: I8a14c6af45ea14d8e7f1ef38a589158f38d0c0ea
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

This new command is mostly backwards compatible, with the exception
that the device_type element was changed into a bitmask.  The device
type bit remains the same (because we only had 0 and 1 anyway), but
when using v1 we can't set any other bits, because that would change
the integer.

Other than that, the struct remains the same and the driver can set
the device_type bit in both cases, but it can only set the low_latency
bit if VER_2 is used.

Change-Id: Ib68d4c821ebcce253b42ed0ea15881fb4e3e01da
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Add support for requesting trigger-based / non trigger-based
measurements.

Change-Id: Ib4d0c471da9c50d9981541a7f5926db384a0f7ce
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Now that we identify the correct cfgs with the new tables for Qu step
C and QuZ with Jf, we can remove the mangling we do later on.

Change-Id: Ic01ce67db147e897ad2424f0e05a70a00d2c620e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

All the QnJ devices have a similar matching to the other Qu devices,
but needs a different configuration.  Convert the QnJ devices to the
new table accordingly.

Change-Id: If236ef3d0da3e605a3379922818f5897e0affd7e
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

Add new generic iwl_trans structures for these devices and apply the
correct cfg depending on the device characteristics.

Since we have to match Qu with IWL_CONFIG_ANY, we also need to move
the Hr devices to the new table, but for now we keep matching on PCI
device and subsystem device IDs.

Change-Id: I14e9146a99621ff11ce50bc746a4b88af508fee0
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

We need to use different firmware versions for different HW steps with
certain devices.  Prepare for this differentiation by adding HW step
to the new device table.

Change-Id: Ib1afb7b0c89e9dc2d26e6d32ea19e978c17ba1dd
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>

After the refactoring, a few extern declarations were accidentally
left in the iwl-config.h file.  Remove them

Change-Id: I79745e440ed5a0a90db61b0daaae374ecef09e86
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>