- 29 Dec, 2023 10 commits
-
-
WangJinchao authored
Create a script for comparing tcrypt speed test logs. The script will systematically analyze differences item by item and provide a summary (average). This tool is useful for evaluating the stability of cryptographic module algorithms and assisting with performance optimization. Please note that for such a comparison, stability depends on whether we allow frequency to float or pin the frequency. The script produces comparisons in two scenes: 1. For operations in seconds ================================================================================ rfc4106(gcm(aes)) (pcrypt(rfc4106(gcm_base(ctr(aes-generic),ghash-generic)))) encryption -------------------------------------------------------------------------------- bit key | byte blocks | base ops | new ops | differ(%) 160 | 16 | 66439 | 63063 | -5.08 160 | 64 | 62220 | 57439 | -7.68 ... 288 | 4096 | 15059 | 16278 | 8.09 288 | 8192 | 9043 | 9526 | 5.34 -------------------------------------------------------------------------------- average differ(%s) | total_differ(%) -------------------------------------------------------------------------------- 5.70 | -4.49 ================================================================================ 2. For avg cycles of operation ================================================================================ rfc4106(gcm(aes)) (pcrypt(rfc4106(gcm_base(ctr(aes-generic),ghash-generic)))) encryption -------------------------------------------------------------------------------- bit key | byte blocks | base cycles | new cycles | differ(%) 160 | 16 | 32500 | 35847 | 10.3 160 | 64 | 33175 | 45808 | 38.08 ... 288 | 4096 | 131369 | 132132 | 0.58 288 | 8192 | 229503 | 234581 | 2.21 -------------------------------------------------------------------------------- average differ(%s) | total_differ(%) -------------------------------------------------------------------------------- 8.41 | -6.70 ================================================================================ Signed-off-by:WangJinchao <wangjinchao@xfusion.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Nithin Dabilpuram authored
Provide an option in Inline IPsec configure mailbox to configure the CPT_AF_LFX_CTL:CTX_ILEN for inline CPT LF attached to CPT RVU PF. This is needed to set the ctx ilen to size of inbound SA for HW errata IPBUCPT-38756. Not setting this would lead to new context's not being fetched. Also set FLR_FLUSH in CPT_LF_CTX_CTL for CPT LF's as workaround for same errata. Signed-off-by:
Nithin Dabilpuram <ndabilpuram@marvell.com> Signed-off-by:
-
Nithin Dabilpuram authored
Register errors interrupts for inline cptlf attached to PF driver so that SMMU faults and other errors can be reported. Signed-off-by:
-
Srujana Challa authored
HW has a errata that CPT HW may hit an issue, while processing CPT instructions with CTX_VAL set and CTX_VAL not set. So, this patch adds the code to always set the CTX_VAL as a workaround. Signed-off-by:
Srujana Challa <schalla@marvell.com> Signed-off-by:
-
Srujana Challa authored
Updates CPT inbound inline IPsec configure mailbox to take CPT credit threshold and bpid, which are introduced in CN10KB. Signed-off-by:
-
Srujana Challa authored
CPT LF must be reset and follow CPT LF disable sequence suggested by HW team, when driver exits. This patch adds code for the same. Signed-off-by:
-
Srujana Challa authored
Adds code to not execute CPT errata "when CPT_AF_DIAG[FLT_DIS] = 0 and a CPT engine access to LLC/DRAM encounters a fault/poison, a rare case may result in unpredictable data being delivered to a CPT engine" workaround on CN10KA B0/CN10KB HW as it is fixed on these chips. Signed-off-by:
-
Srujana Challa authored
On CN10KA B0/CN10KB, CPT scatter gather format has modified to support multi-seg in inline IPsec. Due to this CPT requires new firmware and doesn't work with CN10KA0/A1 firmware. To make HW works in backward compatibility mode or works with CN10KA0/A1 firmware, a bit(T106_MODE) is introduced in HW CSR. This patch adds devlink parameter for configuring T106_MODE. This patch also documents the devlink parameter under Documentation/crypto/device_drivers. Signed-off-by:
-
Srujana Challa authored
Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW to make it compatible with NIX Scatter Gather format to support SG mode for inline IPsec. This patch modifies the code to make the driver works for the same. This patch also enables CPT firmware load for these chips. Signed-off-by:
-
Srujana Challa authored
CPT block reset in CPT PF erase all the CPT configuration which is done in AF driver init. So, remove CPT block reset from CPT PF as it is also being done in AF init and not required in PF. Signed-off-by:
-
- 22 Dec, 2023 14 commits
-
-
Herbert Xu authored
When ecb is used to wrap an lskcipher, the statesize isn't set correctly. Fix this by making the simple instance creator set the statesize. Reported-by: syzbot+8ffb0839a24e9c6bfa76@syzkaller.appspotmail.com Reported-by:
Edward Adam Davis <eadavis@qq.com> Fixes: 662ea18d ("crypto: skcipher - Make use of internal state") Signed-off-by:
-
Thomas Bourgoin authored
smatch warnings: drivers/crypto/stm32/stm32-crc32.c:108 stm32_crc_get_next_crc() warn: can 'crc' even be NULL? Use list_first_entry_or_null instead of list_first_entry to retrieve the first device registered. The function list_first_entry always return a non NULL pointer even if the list is empty. Hence checking if the pointer returned is NULL does not tell if the list is empty or not. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202311281111.ou2oUL2i-lkp@intel.com/Signed-off-by:
Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by:
-
Jie Wang authored
Add support for 420xx devices by including a new device driver that supports such devices, updates to the firmware loader and capabilities. Compared to 4xxx devices, 420xx devices have more acceleration engines (16 service engines and 1 admin) and support the wireless cipher algorithms ZUC and Snow 3G. Signed-off-by:
Jie Wang <jie.wang@intel.com> Co-developed-by:
Dong Xie <dong.xie@intel.com> Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
-
Jie Wang authored
Relocate the structures adf_fw_objs and adf_fw_config from the file adf_4xxx_hw_data.c to the newly created adf_fw_config.h. These structures will be used by new device drivers. This does not introduce any functional change. Signed-off-by:
-
Jie Wang authored
Move logic that is common between QAT GEN4 accelerators to the qat_common folder. This includes addresses of CSRs, setters and configuration logic. When moved, functions and defines have been renamed from 4XXX to GEN4. Code specific to the device is moved to the file adf_gen4_hw_data.c. Code related to configuration is moved to the newly created adf_gen4_config.c. This does not introduce any functional change. Signed-off-by:
-
Jie Wang authored
Add accel_dev as parameter of the function uof_get_num_objs(). This is in preparation for the introduction of the QAT 420xx driver as it will allow to reconfigure the ae_mask when a configuration that does not require all AEs is loaded on the device. This does not introduce any functional change. Signed-off-by:
-
Jie Wang authored
Move the function get_service_enabled() from adf_4xxx_hw_data.c to adf_cfg_services.c and rename it as adf_get_service_enabled(). This function is not specific to the 4xxx and will be used by other QAT drivers. This does not introduce any functional change. Signed-off-by:
-
Om Prakash Singh authored
Document the crypto engine on the SM7280 Platform. Signed-off-by:
Om Prakash Singh <quic_omprsing@quicinc.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Tianjia Zhang authored
When the mpi_ec_ctx structure is initialized, some fields are not cleared, causing a crash when referencing the field when the structure was released. Initially, this issue was ignored because memory for mpi_ec_ctx is allocated with the __GFP_ZERO flag. For example, this error will be triggered when calculating the Za value for SM2 separately. Fixes: d58bb7e5 ("lib/mpi: Introduce ec implementation to MPI library") Cc: stable@vger.kernel.org # v6.5 Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Krzysztof Kozlowski authored
All devices compatible with SM8150 QCE (so SM8250 and newer) do not have clock inputs (clocks are handled by secure firmware), so explicitly disallow the clocks in the bindings. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Binding marks several devices as compatible with IPQ4019 QCE. They have different number of clocks, thus the fallback does not define the clock constraints per variant and each specific compatible should have its clocks in if:then: section. Add missing clocks description for IPQ9574 QCE. Fixes: 1f5ce01d ("dt-bindings: crypto: qcom-qce: add SoC compatible string for ipq9574") Signed-off-by:
-
Jia Jie Ho authored
Define SET_RUNTIME_PM_OPS for StarFive TRNG driver. Signed-off-by:
Jia Jie Ho <jiajie.ho@starfivetech.com> Signed-off-by:
-
Jia Jie Ho authored
Add compatible string for StarFive JH8100 trng. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
wangyangxin authored
The scheduled tasklet needs to be executed on device remove. Fixes: fed93fb6 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by:
wangyangxin <wangyangxin1@huawei.com> Signed-off-by:
Gonglei <arei.gonglei@huawei.com> Signed-off-by:
-
- 15 Dec, 2023 16 commits
-
-
Bharat Bhushan authored
This patch fixes following cleanup issues: - Missing instruction queue free on cleanup. This will lead to memory leak. - lfs->lfs_num is set to zero before cleanup, which will lead to improper cleanup. Signed-off-by:
Bharat Bhushan <bbhushan2@marvell.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Lukasz Stelmach <l.stelmach@samsung.com> Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Christophe JAILLET authored
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chenghai Huang authored
Add the printf of an error message and optimized the handling process of ret. Signed-off-by:
Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by:
-
Chenghai Huang authored
Deleted a dbg function because this function has the risk of address leakage. In addition, this function is only used for debugging in the early stage and is not required in the future. Signed-off-by:
-
