- 16 Oct, 2017 6 commits
-
-
Chen-Yu Tsai authored
Initially we configured the PAD_CTRL1 register at probe/bind time. However it seems the HDMI controller will modify some of the bits in this register by itself. On the A10 it is particularly annoying as it toggles the output invert bits, which inverts the colors on the display output. The U-boot driver this driver is based on sets this register twice, though it seems it's only needed for actual display output. Hence we move it to the mode_set function. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171014040252.9621-8-wens@csie.org
-
Chen-Yu Tsai authored
While debugging inverted color from the HDMI output on the A10, I found that the lowest 3 bits were set. These were cleared on A20 boards that had normal display output. By manually toggling these bits the mapping of the color components to these bits was found. While these are not used anywhere, it would be nice to document them somewhere. Signed-off-by:
-
Chen-Yu Tsai authored
Many of the backend's layer configuration registers have undefined default values. This poses a risk as we use regmap_update_bits in some places, and don't overwrite the whole register. At probe/bind time we explicitly clear all the control registers by writing 0 to them. This patch adds a more detailed explanation on why we're doing this. Signed-off-by:
-
Chen-Yu Tsai authored
Commit 4636ce93 ("drm/fb-cma-helper: Add drm_fb_cma_get_gem_addr()") adds a new helper, which covers fetching a drm_framebuffer's GEM object and calculating the buffer address for a given plane. This patch uses this helper to replace our own open coded version of the same function. Signed-off-by:
-
Chen-Yu Tsai authored
The backend has various clocks and reset controls that need to be enabled and deasserted before register access is possible. Move the creation of the regmap to after the clocks and reset controls have been configured where it makes more sense. Signed-off-by:
-
Chen-Yu Tsai authored
Even though the components framework can handle duplicate entries, the extra entries cause a lot more debug messages to be generated, which would be confusing to developers not familiar with our driver and the framework in general. Instead, we can scan the relatively small queue and check if the component to be added is already queued up. Since the display pipelines are symmetrical (not considering the third display pipeline on the A80), and we add components level by level, when we get to the second instance at the same level, any shared downstream components would already be in the queue. Signed-off-by:
-
- 13 Oct, 2017 10 commits
-
-
Eric Anholt authored
The documentation said to use src_w here, and I didn't consider that we actually needed to be using pitch somewhere in our setup. Fixes scanout on my DSI panel when X11 does initial setup with 1920x1080 HDMI and 800x480 DSI both at 0,0 of the same framebuffer. v2: Add some comments requested by Boris Signed-off-by:
Eric Anholt <eric@anholt.net> Fixes: 98830d91 ("drm/vc4: Add T-format scanout support.") Link: https://patchwork.freedesktop.org/patch/msgid/20170927193209.11870-1-eric@anholt.netReviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com>
-
Eric Anholt authored
We want the adjusted_mode->clock to be the actual clock we're expecting to program, so that consumers see the right values for clock and vrefresh. Signed-off-by:
-
Harsha Sharma authored
Prefer kcalloc over kzalloc to allocate an array. This patch fixes checkcpatch issue. Signed-off-by:
Harsha Sharma <harshasharmaiitr@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com Link: https://patchwork.freedesktop.org/patch/msgid/20171013073747.29877-1-harshasharmaiitr@gmail.com
-
Haneen Mohammed authored
Since the driver is relying on the atomic helpers, remove the explicit .best_encoder assignment and let the core call drm_atomic_helper_best_encoder(). Signed-off-by:
Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171010205858.GA4806@Haneen
-
Harsha Sharma authored
Convert instances of dev_error to DRM_DEV_ERROR as we have DRM_DEV_ERROR variants of drm print macros. Signed-off-by:
-
Maarten Lankhorst authored
Core drm shouldn't depend on anything in drm-kms-helper, or the drm module will fail to load. insmod drm fails with [ 6087.674390] drm: Unknown symbol drm_panel_bridge_remove (err 0) which is defined in drm_kms_helper.ko This call was added by commit c70087e8 ("drm/drm_of: add drm_of_panel_bridge_remove function"), and the fix is defining it in the drm_of.h header, to break the circular dependency. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8f95e623-9480-97dc-2414-77086d8aa49d@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@intel.com> #irc Fixes: c70087e8 ("drm/drm_of: add drm_of_panel_bridge_remove function") Acked-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org>
-
Thierry Reding authored
Fix up this reference so that the proper link is generated in the documentation and so that people don't go chasing after the wrong function for an embarrassingly long time. Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171012140857.9559-1-thierry.reding@gmail.com
-
Thierry Reding authored
Fix "esay-to-use" to "easy-to-use" typo. Acked-by:
-
Ville Syrjälä authored
'user_handles' needs a __user annotation for fix the following sparse warning: drm_syncobj.c:813:37: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:813:37: expected void const [noderef] <asn:1>*from drm_syncobj.c:813:37: got void *user_handles drm_syncobj.c:875:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:875:38: expected void *user_handles drm_syncobj.c:875:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:908:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:908:38: expected void *user_handles drm_syncobj.c:908:38: got void [noderef] <asn:1>*<noident> drm_syncobj.c:941:38: warning: incorrect type in argument 2 (different address spaces) drm_syncobj.c:941:38: expected void *user_handles drm_syncobj.c:941:38: got void [noderef] <asn:1>*<noident> Cc: Jason Ekstrand <jason@jlekstrand.net> Fixes: 3e6fb72d ("drm/syncobj: Add a syncobj_array_find helper") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170901165328.24459-2-ville.syrjala@linux.intel.comReviewed-by:
-
Arnd Bergmann authored
The new driver fails to build when CONFIG_PINCTRL is disabled: drivers/gpu/drm/rockchip/rockchip_lvds.c: In function 'rockchip_lvds_grf_config': drivers/gpu/drm/rockchip/rockchip_lvds.c:229:39: error: dereferencing pointer to incomplete type 'struct dev_pin_info' if (lvds->pins && !IS_ERR(lvds->pins->default_state)) This adds the respective Kconfig dependency. Fixes: 34cc0aa2 ("drm/rockchip: Add support for Rockchip Soc LVDS") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Mark Yao <mark.yao@rock-chips.com> Signed-off-by:
-
- 12 Oct, 2017 3 commits
-
-
Dan Carpenter authored
The of_graph_get_remote_node() function doesn't return error pointers, it returns NULL on error so I've updated the check. Fixes: 86418f90 ("drm: convert drivers to use of_graph_get_remote_node") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Allen Pais authored
Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1505287939-14106-3-git-send-email-allen.lkml@gmail.com
-
Ville Syrjälä authored
On machines where the vblank interrupt fires some time after the start of vblank (or we just manage to race with the vblank interrupt handler) we will currently stuff a stale vblank counter value into the flip event, and thus we'll prematurely complete the flip. Switch over to drm_crtc_accurate_vblank_count() to make sure we have an up to date counter value, crucially also remember to add the +1 so that the delayed vblank interrupt won't complete the flip prematurely. Cc: stable@vger.kernel.org Cc: Daniel Vetter <daniel@ffwll.ch> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
- 11 Oct, 2017 13 commits
-
-
Jani Nikula authored
Falling back to the lowest value is likely the only thing we can do, but doing it silently seems like a bad thing to do. Catch it early and make loud noises. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Daniel Vetter authored
Merge tag 'regmap-poll-field' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into drm-misc-next regmap: Add field polling macro Requested by Maxime Ripard to make sun4i compile again (next time the other way round is better). Signed-off-by:
-
Aishwarya Pant authored
pipe is an unsigned int and less than zero comparison for unsigned values is always false. Detected using the following cocci script: @@ unsigned int i; @@ * i < 0 Signed-off-by:
Aishwarya Pant <aishpant@gmail.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Maciej Purski authored
MHL specification defines Remote Control Protocol(RCP) to send input events between MHL devices. The driver now recognizes RCP messages and reacts to them by reporting key events to input subsystem, allowing a user to control a device using TV remote control. Signed-off-by:
Maciej Purski <m.purski@samsung.com> Acked-by:
Sean Young <sean@mess.org> Acked-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com
-
Chen-Yu Tsai authored
The HDMI controller found in the A31 SoCs is slightly different from the one already supported, which is found in the A10s: - Need different initial values for the PLL related registers - Different behavior of the DDC and TMDS clocks - Different register layout for the DDC portion - Separate DDC parent clock This patch adds support for it. Signed-off-by:
-
Chen-Yu Tsai authored
The DDC block for the HDMI controller is different on the A31. This patch adds the register definitions. Signed-off-by:
-
Chen-Yu Tsai authored
The HDMI controller found in earlier Allwinner SoCs have slight differences between the A10, A10s, and the A31: - Need different initial values for the PLL related registers - Different behavior of the DDC and TMDS clocks - Different register layout for the DDC portion - Separate DDC parent clock on the A31 - Explicit reset control For the A31, the HDMI TMDS clock has a different value offset for the divider. The HDMI DDC block is different from the one in the other SoCs. As far as the DDC clock goes, it has no pre-divider, as it is clocked from a slower parent clock, not the TMDS clock. The divider offset from the register value is different. And the clock control register is at a different offset. A new variant data structure is created to store pointers to the above functions, structures, and the different initial values. Another flag notates whether there is a separate DDC parent clock. If not, the TMDS clock is passed to the DDC clock create function, as before. Regmap fields are used to deal with the different register layout of the DDC block. Signed-off-by:
-
Chen-Yu Tsai authored
The HDMI controller in the A31 SoC is slightly different from the earlier version. In addition to the TMDS clock and DDC controls, this version now takes a second DDC clock input. Add a compatible string for it, and add the DDC clock input to the list of clocks required. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Chen-Yu Tsai authored
On SoCs with two display pipelines, it is possible that the two pipelines are active at the same time, with potentially incompatible dot clocks. Let the HDMI encoder's TMDS clock go through all of its parents when calculating possible clock rates. This allows usage of the second video PLL as its parent. Signed-off-by:
-
Chen-Yu Tsai authored
The HDMI driver is written with readl/writel I/O to the registers. However, to support the A31 variant, which has a different layout for the DDC registers, it was recommended to use regfields to have a cleaner implementation. To use regfields, we need to create an underlying regmap. This patch only adds the regmap. It does not convert the existing driver accesses to use regmap. Signed-off-by:
-
Chen-Yu Tsai authored
The HDMI driver enables the bus and mod clocks in the bind function, but does not disable them if it then bails our due to any errors. Neither does it disable the clocks in the unbind function. Fix this by adding a proper error path to the bind function, and clk_disable_unprepare calls to the unbind function. Also rename the err_cleanup_connector label to err_cleanup_encoder, since it is the encoder that gets cleaned up. Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Signed-off-by:
-
Chen-Yu Tsai authored
On systems with 2 TCONs such as the A31, it is possible to demux the output of the TCONs to one encoder. Add support for this for the A31. Signed-off-by:
-
Chen-Yu Tsai authored
Different SoCs have different muxing options and values for the TCON outputs. Instead of stuffing every possibility in sun4i_tcon_set_mux(), add a callback pointer to sun4i_tcon_quirks that each TCON variant can use to provide muxing support. The current muxing options in sun4i_tcon_set_mux() for sun5i-a13 are moved to a new sun5i-specific callback function. Since the new callback replaces what the .has_unknown_mux field in tcon quirks did in the past, the field is removed. Signed-off-by:
-
- 10 Oct, 2017 5 commits
-
-
benjamin.gaignard@linaro.org authored
When using drm_of_panel_bridge_remove() we can simplify the code and remove is_panel_bridge from dw_mipi_dsi structure. Signed-off-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
-
benjamin.gaignard@linaro.org authored
With a call to drm_of_panel_bridge_remove() we could remove the bridge without store it in vc4_dpi internal driver structure. Signed-off-by:
-
benjamin.gaignard@linaro.org authored
With a call to drm_of_panel_bridge_remove() we could remove the bridge without store it in ldtc internal driver structure. Signed-off-by:
-
benjamin.gaignard@linaro.org authored
This function is the pendant of drm_of_find_panel_or_bridge() to remove a previously allocated panel_bridge. Given a specific port and endpoint it remove the panel bridge. Since drm_panel_bridge_remove() will check that bridge parameter is not NULL and is a real drm_panel_bridge and no a simple bridge it is safe to call it directly. Signed-off-by:
-
benjamin.gaignard@linaro.org authored
Make sure that bridge parameter is not NULL and can be safely cast into a panel_bridge structure. Signed-off-by:
-
- 09 Oct, 2017 3 commits
-
-
Christian König authored
When dma_fence_get_rcu() fails to acquire a reference it doesn't necessary mean that there is no fence at all. It usually mean that the fence was replaced by a new one and in this situation we certainly want to have the new one as result and *NOT* NULL. v2: Keep extra check after dma_fence_get_rcu(). Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by:
-
Christian König authored
Stop requiring that the src reservation object is locked for this operation. Acked-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Jeffy Chen authored
Kmemleak reported memory leak after suspend and resume: unreferenced object 0xffffffc0e31d8880 (size 128): comm "bash", pid 181, jiffies 4294763583 (age 24.694s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 20 a2 eb c0 ff ff ff ......... ...... 01 00 00 00 00 00 00 00 80 87 1d e3 c0 ff ff ff ................ backtrace: [<ffffffc00034bb64>] __save_stack_trace+0x48/0x6c [<ffffffc00034c244>] create_object+0x138/0x254 [<ffffffc0009dd218>] kmemleak_alloc+0x58/0x8c [<ffffffc000346de4>] kmem_cache_alloc_trace+0x188/0x254 [<ffffffc0005af4c0>] drm_atomic_state_alloc+0x3c/0x88 [<ffffffc000591f0c>] drm_atomic_helper_duplicate_state+0x28/0x158 [<ffffffc000592098>] drm_atomic_helper_suspend+0x5c/0xf0 Problem here is that we are duplicating the drm_atomic_state in drm_atomic_helper_suspend(), but not unreference it in the resume path. Fixes: 14942760 ("drm/atomic-helper: Implement subsystem-level suspend/resume") Signed-off-by:Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by:
-
