- 06 Feb, 2017 20 commits
-
-
Archit Taneja authored
Register cursor drm_planes. The loop in modeset_init that inits the planes and crtcs has to be refactored a bit. We first iterate all the hwpipes to find the cursor planes. Then, we loop again to create crtcs. In msm_atomic_wait_for_commit_done, remove the check which bypasses waiting for vsyncs if state->legacy_cursor_updates is true. We will later create a fast path for cursor position changes in the cursor plane's update_plane func that doesn't go via the regular atomic commit path. For rest of cursor related updates, we will have to wait for vsyncs, so ignore the legacy_cursor_updates flag. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
These are various changes added in preparation for cursor planes: - Add a pipe_cursor block for 8x96 in mdp5_cfg. - Add a new pipe CAP called MDP_PIPE_CAP_CURSOR. Use this to ensure we assign a cursor SSPP for a drm_plane with type DRM_PLANE_TYPE_CURSOR. - Update mdp5_ctl_blend_mask/ext_blend_mask funcs to incorporate cursor SSPPs. - In mdp5_ctl_blend, iterate through MAX_STAGES instead of stage_cnt, we need to do this because we can now have empty stages in between. - In mdp5_crtc_atomic_check, make sure that the cursor plane has the highest zorder, and stage the cursor plane to the maximum stage # present on the HW. - Create drm_crtc_funcs that doesn't try to implement cursors using the older LM cursor HW. - Pass drm_plane_type in mdp5_plane_init instead of a bool telling whether plane is primary or not. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
In MDP5 Layer Mixer HW, the blender output is only the blended color components (i.e R, G and B, or COLOR0/1/2 in MDP5 HW terminology). This is fed to the BG input of the next blender. We also need to provide an alpha (COLOR3) value for the BG input at the next stage. This is configured via using the REG_MDP5_LM_BLEND_COLOR_OUT register. For each stage, we can propagate either the BG or FG alpha to the next stage. The approach taken by the driver is to propagate FG alpha, if the plane staged on that blender has an alpha. If it doesn't, we try to propagate the base layer's alpha. This is borrowed from downstream MDP5 kernel driver. Without this, we don't see any cursor plane content. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
The MDP5 plane's atomic_check ops doesn't perform clipping tests. This didn't hurt us much in the past, but clipping becomes important with cursor planes. Use drm_plane_helper_check_state, the way rockchip/intel/mtk drivers already do. Use these drivers as reference. Clipping requires knowledge of the crtc width and height. This requires us to call drm_atomic_helper_check_modeset before drm_atomic_helper_check_planes in the driver's atomic_check op, because check_modetest will populate the mode for the crtc, needed to populate the clip rectangle. We update the plane_enabled(state) local helper to use state->visible, since state->visible and 'state->fb && state->crtc' represent the same thing. One issue with the existing code is that we don't have a way to disable the plane when it's completely clipped out. Until there isn't an update on the crtc (which would de-stage the plane), we would still see the plane in its last 'visible' configuration. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Use SSPP_NONE in mdp5_plane_pipe() if there is now hwpipe allocated for the drm_plane. Returning '0' means we are returning VIG0 pipe. Also, use the mdp5_pipe enum to pass around the stage array. Initialize the stage to SSPP_NONE by default. We do the above because 1) Cursor plane has to be staged at the topmost blender of the LM, which can result in empty stages in between 2) In the future, when we support multiple LMs per CRTC. We could have stages which don't have any pipe assigned to them. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
We currently create CRTCs equaling to the # of Layer Mixer blocks we have on the MDP5 HW. This number is generally more than the # of encoders (INTFs) we have in the MDSS HW. The number of encoders connected to displays on the platform (as described by DT) would be even lesser. Create only N drm_crtcs, where N is the number of drm_encoders successfully registered. To do this, we call modeset_init_intf() before we init the drm_crtcs and drm_planes. Because of this change, setting encoder->possible_crtcs needs to be moved from construct_encoder() to a later point when we know how many CRTCs we have. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Count can't be non-zero. Changing to uint will also prevent future warnings. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
For the DSI interfaces, the mdp5_kms core creates 2 encoders for video and command modes. Create only a single encoder per interface. When creating the encoder, set the interface type to MDP5_INTF_MODE_NONE. It's the bridge (DSI/HDMI/eDP) driver's responsibility to set a different interface type. It can use the the kms func op set_encoder_mode to change the mode of operation, which in turn would configure the interface type for the INTF. In mdp5_cmd_encoder.c, we remove the redundant code, and make the commmand mode funcs as helpers that are used in mdp5_encoder.c Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Rename the mdp5_encoder_* ops for active displays to mdp5_vid_encoder_* ops. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
The mdp5 kms driver currently sets up multiple encoders per interface (INTF), one for each kind of mode of operation it supports. We create 2 drm_encoders for DSI, one for Video Mode and the other for Command Mode operation. The reason behind this approach could have been that we aren't aware of the DSI device's mode of operation when we create the encoders. This makes things a bit complicated, since these encoders have to be further attached to the same DSI bridge. The easier way out is to create a single encoder, and make the DSI driver set its mode of operation when we know what the DSI device's mode flags are. Start with providing a way to set the mdp5_intf_mode using a kms func that sets the encoder's mode of operation. When constructing a DSI encoder, we set the mode of operation to Video Mode as default. When the DSI device is attached to the host, we probe the DSI mode flags and set the corresponding mode of operation. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
We currently create 2 encoders for DSI interfaces, one for command mode and other for video mode operation. This isn't needed as we can't really use both the encoders at the same time. It also makes connecting bridges harder. Switch to creating a single encoder. For now, we assume that the encoder is configured only in video mode. Later, the same encoder would be usable in both modes. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
The commit "drm: bridge: Link encoder and bridge in core code" updated the drm_bridge_attach() API to also include the drm_encoder pointer the bridge attaches to. The func msm_dsi_manager_bridge_init() now relies on the drm_encoder pointer stored in msm_dsi->encoders to pass the encoder to the bridge API. msm_dsi->encoders is unfortunately set after this function is called, resulting in us passing a NULL pointer to drm_brigde_attach. This results in an error and the DSI driver probe fails. Move the initialization of msm_dsi->encoders[] a bit up. Also, don't try to set the encoder's bridge. That's now managed by the bridge API. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Archit Taneja authored
Define the block in advance so that the generated mdp5.xml.h doesn't break build. Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Suggested by Rob Herring. We still support the old names for compatibility with downstream android dt files. Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Acked-by:
Rob Herring <robh@kernel.org>
-
Rob Clark authored
This was never documented or used in upstream dtb. It is used by downstream bindings from android device kernels. But the quirks are a property of the gpu revision, and as such are redundant to be listed separately in dt. Instead, move the quirks to the device table. Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net>
-
Rob Clark authored
The original way we determined the gpu version was based on downstream bindings from android kernel. A cleaner way is to get the version from the compatible string. Note that no upstream dtb uses these bindings. But the code still supports falling back to the legacy bindings (with a warning), so that we are still compatible with the gpu dt node from android device kernels. Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Acked-by:
Rob Herring <robh@kernel.org>
-
Rob Clark authored
The plan is to use the OPP bindings. For now, remove the documentation for qcom,gpu-pwrlevels, and make the driver fall back to a safe low clock if the node is not present. Note that no upstream dtb use this node. For now we keep compatibility with this node to avoid breaking compatibility with downstream android dt files. Signed-off-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Acked-by:
Rob Herring <robh@kernel.org>
-
- 02 Feb, 2017 9 commits
-
-
https://git.pengutronix.de/git/lst/linuxDave Airlie authored
It includes code cleanups from Bhumika and Liviu, a significant shader performance fix and additions to the cmdstream validator from Wladimir and the addition of a cmdbuf suballocator by myself. The suballocator improves performance on all chips by reducing the CPU overhead of the kernel driver and side steps the GC3000 FE MMU flush erratum, now making the workarounds in IOVA allocation we had before unnecessary, which results in a nice cleanup of the code in that area. * 'drm-etnaviv-next' of https://git.pengutronix.de/git/lst/linux: drm/etnaviv: Remove duplicate header file include Revert "drm/etnaviv: trick drm_mm into giving out a low IOVA" drm/etnaviv: add cmdbuf suballocator drm/etnaviv: get cmdbuf physical address through the cmdbuf abstraction drm/etnaviv: wire up iova handling in new cmdbuf abstraction drm/etnaviv: move cmdbuf de-/allocation into own file drm/etnaviv: always flush MMU TLBs on map/unmap drm/etnaviv: constify etnaviv_iommu_ops structures drm/etnaviv: set up initial PULSE_EATER register drm/etnaviv: add new GC3000 sensitive states
-
Liviu Dudau authored
etnaviv_gem.h header gets included twice. Remove duplicate. Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de>
-
Lucas Stach authored
Now that commandstreams are handled through the cmdbuf suballocator the workaround to make the IOVA games work is not needed anymore. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
There are 3 big benefits to suballocating a single big DMA buffer for command submission: 1. Avoid hammering CMA. The old way of allocating and freeing a DMA buffer for each submission was hitting some of the real slow pathes in CMA, as this allocator was not designed for a concurrent small buffers load. 2. Less TLB flushes on IOMMUv2. If a new command buffer is mapped into the GPU address space the MMU TLBs need to be flushed. By having one big buffer statically mapped to the GPU, a lot of those flushes can be avoided. 3. No funky workarounds for GC3000. The FE TLB flush on GC3000 isn't reliable. To work around that we tried to lay out the cmdbufs in the GPU address space in a way to avoid this issue. This hasn't always worked if the address space is crowded. A single statically mapped buffer avoids the erratum completely. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
Don't allow IOMMUv2 to peek directly into the cmdbuf, but get the needed PA through a dedicated function. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
Don't call the IOMMU directly, but go through the new cmdbuf abstraction. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
This will get more complex with the following changes, so move it into its own place. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Lucas Stach authored
This ensures that the GPU isn't able to write into already freed objects, as doing this in the IOVA reaper isn't enough, as the gem_free_object path will also cause unmaps to happen. On MMUv2 this also ensures that stale entries, which may have been prefetched into the TLB will be purged. The flush is low overhead, as it gets batched up with the next user command buffer, so this isn't incuring an overhead for each buffer map/unmap. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian Gmeiner <christian.gmeiner@gmail.com>
-
Bhumika Goyal authored
Declare etnaviv_iommu_ops structure as const as it is only used when the reference of one of its field is stored in the ops field of a iommu_domain structure. This ops field is of type const, so etnaviv_iommu_ops structures having similar properties can be declared const too. Done using Coccinelle. Before and after size details of .o file remains the same after cross compiling for arm architecture. lst: Trimmed commit message, apply the same change to iommu_v2. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de>
-
- 31 Jan, 2017 9 commits
-
-
Dave Airlie authored
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next adding runtime PM support to MIC driver, and including some cleanups - especially using atomic helper functions instead of specific ones - and fixups. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: drm/exynos: g2d: prevent integer overflow in drm/exynos: fix a timeout loop drm/exynos: use atomic helper commit drm/exynos: remove unnecessary codes drm/exynos: mic: Add runtime PM support drm/exynos: Stop using drm_framebuffer_unregister_private drm/exynos: mic: Fix parse_dt function drm/exynos: mic: Add mode_set callback function
-
Dave Airlie authored
Merge tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-next Allwinner DRM changes for 4.11 Just one minor fix. * tag 'sunxi-drm-for-4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: drm/sun4i: Fix a return value in case of error
-
git://people.freedesktop.org/~syeh/repos_linuxDave Airlie authored
This is to address what we've discussed, moving some of the minor changes into a drm-next request. * 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux: drm/vmwgfx: Use kmemdup instead of kmalloc and memcpy drm/vmwgfx: Fix depth input into drm_mode_legacy_fb_format drm/vmwgfx: Fix a potential integer overflow drm/vmwgfx: Clear an uninitialized struct member drm/vmwgfx: Annotate ignored return values drm/vmwgfx: Clear uninitialized fields of a parameter
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
This is the main feature pull for radeon and amdgpu for 4.11. Highlights: - Power and clockgating improvements - Preliminary SR-IOV support - ttm buffer priority support - ttm eviction fixes - Removal of the ttm lru callbacks - Remove SI DPM quirks due to MC firmware issues - Handle VFCT with multiple vbioses - Powerplay improvements - Lots of driver cleanups * 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux: (120 commits) drm/amdgpu: fix amdgpu_bo_va_mapping flags drm/amdgpu: access stolen VRAM directly on CZ (v2) drm/amdgpu: access stolen VRAM directly on KV/KB (v2) drm/amdgpu: fix kernel panic when dpm disabled on Kv. drm/amdgpu: fix dpm bug on Kv. drm/amd/powerplay: fix regresstion issue can't set manual dpm mode. drm/amdgpu: handle vfct with multiple vbios images drm/radeon: handle vfct with multiple vbios images drm/amdgpu: move misc si headers into amdgpu drm/amdgpu: remove unused header si_reg.h drm/radeon: drop pitcairn dpm quirks drm/amdgpu: drop pitcairn dpm quirks drm: radeon: radeon_ttm: Handle return NULL error from ioremap_nocache drm/amd/amdgpu/amdgpu_ttm: Handle return NULL error from ioremap_nocache drm/amdgpu: add new virtual display ID drm/amd/amdgpu: remove the uncessary parameter for ib scheduler drm/amdgpu: Bring bo creation in line with radeon driver (v2) drm/amd/powerplay: fix misspelling in header guard drm/ttm: revert "add optional LRU removal callback v2" drm/ttm: revert "implement LRU add callbacks v2" ...
-
git://anongit.freedesktop.org/git/drm-miscDave Airlie authored
Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
-
Dave Airlie authored
Merge tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux into drm-next Contains a single patch to create the fbdev at driver's registration time instead of waiting for the connector status change. * tag 'drm/atmel-hlcdc/for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bbrezillon/linux: drm/atmel-hlcdc: Rework the fbdev creation logic
-
Dave Airlie authored
Merge tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into drm-next ZTE DRM driver updates for 4.11: - Add missing selection of VIDEOMODE_HELPERS in Kconfig, since ZTE DRM driver uses drm_display_mode_to_videomode(). - Enable HDMI audio support through SPDIF interface based on generic hdmi-audio-codec driver. - Enable VOU VL (Video Layer) to support overlay plane with scaling function. - Refine zx_vou driver a bit and then add TV Encoder output device support. [airlied: fixup plane format change] * tag 'zxdrm-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: drm: zte: add tvenc driver support dt: add bindings for ZTE tvenc device drm: zte: add function to configure vou_ctrl dividers drm: zte: move struct vou_inf into zx_vou driver drm: zte: add interlace mode support drm: zte: add overlay plane support drm: zte: add .atomic_disable hook to disable graphic layer drm: zte: make zx_plane accessible from zx_vou driver drm: zte: support hdmi audio through spdif drm: zte: select VIDEOMODE_HELPERS in Kconfig
-
git://anongit.freedesktop.org/git/drm-intelDave Airlie authored
Updated pull request after I pulled first time :) * 'drm-intel-next' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Pevent copying uninitialised garbage into vma->ggtt_view
-
git://linux-arm.org/linux-ldDave Airlie authored
Hope I'm not too late before the cutoff for the v4.11 with these patches. Mostly an asorted set of fixes that we have discovered while playing with the code and preparing for the next set of features. * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: fix stride setting for multi-plane formats drm: mali-dp: Add plane offset to the plane's physical start address register drm: mali-dp: Check for sufficient address space drm: mali-dp: Check hw version matches device-tree drm: mali-dp: Rename malidp_input_format to malidp_pixel_format drm: mali-dp: fix Lx_CONTROL register fields clobber drm: mali-dp: Fix transposed horizontal/vertical flip drm: mali-dp: Fix destination size handling when rotating drm: mali-dp: Don't force source size == crtc size drm: mali-dp: Check more use cases in the plane's ->atomic_check() drm: malidp: Remove event_list member from struct malidp_drm drm/arm/malidp: Fix possible dereference of NULL
-
- 30 Jan, 2017 2 commits
-
-
Joonyoung Shim authored
The size computations done in the ioctl function use an integer. If userspace submits a request with req->cmd_nr or req->cmd_buf_nr set to INT_MAX, the integer computations overflow later, leading to potential (kernel) memory corruption. Prevent this issue by enforcing a limit on the number of submitted commands, so that we have enough headroom later for the size computations. Note that this change has no impact on the currently available users in userspace, like e.g. libdrm/exynos. While at it, also make a comment about the size computation more detailed. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Dan Carpenter authored
We were trying to print an error message if we timed out here, but the loop actually ends with "tries" set to UINT_MAX and not zero. Fix this by changing from tries-- to --tries. A for loop would actually be the most natural way to do this. My fix means we only loop 99 times instead of 100 but that's probably ok. Fixes: a696394c ('drm/exynos: mixer: simplify loop in vp_win_reset()') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-