- 23 Feb, 2019 20 commits
-
-
Eric Dumazet authored
commit cf657d22 upstream. Due to quadratic behavior of x25_new_lci(), syzbot was able to trigger an rcu stall. Fix this by not blocking BH for the whole duration of the function, and inserting a reschedule point when possible. If we care enough, using a bitmap could get rid of the quadratic behavior. syzbot report : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10500 ticks this GP) idle=4fa/1/0x4000000000000002 softirq=283376/283376 fqs=0 rcu: (t=10501 jiffies g=383105 q=136) rcu: rcu_preempt kthread starved for 10502 jiffies! g383105 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0 rcu: RCU grace-period kthread stack dump: rcu_preempt I28928 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2844 [inline] __schedule+0x817/0x1cc0 kernel/sched/core.c:3485 schedule+0x92/0x180 kernel/sched/core.c:3529 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1948 [inline] rcu_gp_kthread+0x956/0x17a0 kernel/rcu/tree.c:2105 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 8759 Comm: syz-executor2 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1211 print_cpu_stall kernel/rcu/tree.c:1348 [inline] check_cpu_stall kernel/rcu/tree.c:1422 [inline] rcu_pending kernel/rcu/tree.c:3018 [inline] rcu_check_callbacks.cold+0x500/0xa4a kernel/rcu/tree.c:2521 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 </IRQ> RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline] RIP: 0010:queued_write_lock_slowpath+0x13e/0x290 kernel/locking/qrwlock.c:86 Code: 00 00 fc ff df 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 <41> 0f b6 55 00 41 38 d7 7c eb 84 d2 74 e7 48 89 df e8 6c 0f 4f 00 RSP: 0018:ffff88805f117bd8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 RAX: 0000000000000300 RBX: ffffffff89413ba0 RCX: 1ffffffff1282774 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89413ba0 RBP: ffff88805f117c70 R08: 1ffffffff1282774 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: 00000000000000ff R13: fffffbfff1282774 R14: 1ffff1100be22f7d R15: 0000000000000003 queued_write_lock include/asm-generic/qrwlock.h:104 [inline] do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203 __raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline] _raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312 x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267 x25_bind+0x273/0x340 net/x25/af_x25.c:705 __sys_bind+0x23f/0x290 net/socket.c:1505 __do_sys_bind net/socket.c:1516 [inline] __se_sys_bind net/socket.c:1514 [inline] __x64_sys_bind+0x73/0xb0 net/socket.c:1514 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fafccd0dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000240 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fafccd0e6d4 R13: 00000000004bdf8b R14: 00000000004ce4b8 R15: 00000000ffffffff Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 8752 Comm: syz-executor4 Not tainted 5.0.0-rc4+ #51 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__x25_find_socket+0x78/0x120 net/x25/af_x25.c:328 Code: 89 f8 48 c1 e8 03 80 3c 18 00 0f 85 a6 00 00 00 4d 8b 64 24 68 4d 85 e4 74 7f e8 03 97 3d fb 49 83 ec 68 74 74 e8 f8 96 3d fb <49> 8d bc 24 88 04 00 00 48 89 f8 48 c1 e8 03 0f b6 04 18 84 c0 74 RSP: 0018:ffff8880639efc58 EFLAGS: 00000246 RAX: 0000000000040000 RBX: dffffc0000000000 RCX: ffffc9000e677000 RDX: 0000000000040000 RSI: ffffffff863244b8 RDI: ffff88806a764628 RBP: ffff8880639efc80 R08: ffff8880a80d05c0 R09: fffffbfff1282775 R10: fffffbfff1282774 R11: ffffffff89413ba3 R12: ffff88806a7645c0 R13: 0000000000000001 R14: ffff88809f29ac00 R15: 0000000000000000 FS: 00007fe8d0c58700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32823000 CR3: 00000000672eb000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_new_lci net/x25/af_x25.c:357 [inline] x25_connect+0x374/0xdf0 net/x25/af_x25.c:786 __sys_connect+0x266/0x330 net/socket.c:1686 __do_sys_connect net/socket.c:1697 [inline] __se_sys_connect net/socket.c:1694 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1694 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457e39 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe8d0c57c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e39 RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe8d0c586d4 R13: 00000000004be378 R14: 00000000004ceb00 R15: 00000000ffffffff Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Cc: Andrew Hendry <andrew.hendry@gmail.com> Cc: linux-x25@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Scott Mayhew authored
commit e7afe6c1 upstream. While trying to reproduce a reported kernel panic on arm64, I discovered that AUTH_GSS basically doesn't work at all with older enctypes on arm64 systems with CONFIG_VMAP_STACK enabled. It turns out there still a few places using stack memory with scatterlists, causing krb5_encrypt() and krb5_decrypt() to produce incorrect results (or a BUG if CONFIG_DEBUG_SG is enabled). Tested with cthon on v4.0/v4.1/v4.2 with krb5/krb5i/krb5p using des3-cbc-sha1 and arcfour-hmac-md5. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 04c03114 ] soukjin bae reported a crash in tcp_v4_err() handling ICMP_DEST_UNREACH after tcp_write_queue_head(sk) returned a NULL pointer. Current logic should have prevented this : if (seq != tp->snd_una || !icsk->icsk_retransmits || !icsk->icsk_backoff || fastopen) break; Problem is the write queue might have been purged and icsk_backoff has not been cleared. Signed-off-by:
soukjin bae <soukjin.bae@samsung.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Alexander Duyck authored
[ Upstream commit 3bed3cc4 ] This patch addresses the fact that there are drivers, specifically tun, that will call into the network page fragment allocators with buffer sizes that are not cache aligned. Doing this could result in data alignment and DMA performance issues as these fragment pools are also shared with the skb allocator and any other devices that will use napi_alloc_frags or netdev_alloc_frags. Fixes: ffde7328 ("net: Split netdev_alloc_frag into __alloc_page_frag and add __napi_alloc_frag") Reported-by:
Jann Horn <jannh@google.com> Signed-off-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 2c4cc971 ] ICMP handlers are not very often stressed, we should make them more resilient to bugs that might surface in the future. If there is no packet in retransmit queue, we should avoid a NULL deref. Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 8681ef1f ] Fixes: 3b89ea9c ("net: Fix for_each_netdev_feature on Big endian") Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit 816db766 ] When fail, translate_desc() returns negative value, otherwise the number of iovs. So we should fail when the return value is negative instead of a blindly check against zero. Detected by CoverityScan, CID# 1442593: Control flow issues (DEADCODE) Fixes: cc5e7107 ("vhost: log dirty page correctly") Acked-by:
Michael S. Tsirkin <mst@redhat.com> Reported-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 1765f5dc ] Another platform requires even longer delay to make the device work correctly after S3. So increase the delay to 300ms. BugLink: https://bugs.launchpad.net/bugs/1798921Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Alexandre Torgue authored
[ Upstream commit 224babd62d6f19581757a6d8bae3bf9501fc10de ] GMAC IP is little-endian and used on several kind of CPU (big or little endian). Main callbacks functions of the stmmac drivers take care about it. It was not the case for dwmac4_get_timestamp function. Fixes: ba1ffd74 ("stmmac: fix PTP support for GMAC4") Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
[ Upstream commit 8a7493e5 ] We are saving the status of EEE even before we try to enable it. This leads to a race with XMIT function that tries to arm EEE timer before we set it up. Fix this by only saving the EEE parameters after all operations are performed with success. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Fixes: d765955d ("stmmac: add the Energy Efficient Ethernet support") Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit 197f9ab7 ] Some PHY drivers like the generic one do not provide a read_status callback on their own but rely on genphy_read_status being called directly. With the current code, this results in a NULL function pointer call. Call genphy_read_status instead when there is no specific callback. Fixes: f411a616 ("net: phy: Add gmiitorgmii converter support") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Hauke Mehrtens authored
[ Upstream commit 3b89ea9c ] The features attribute is of type u64 and stored in the native endianes on the system. The for_each_set_bit() macro takes a pointer to a 32 bit array and goes over the bits in this area. On little Endian systems this also works with an u64 as the most significant bit is on the highest address, but on big endian the words are swapped. When we expect bit 15 here we get bit 47 (15 + 32). This patch converts it more or less to its own for_each_set_bit() implementation which works on 64 bit integers directly. This is then completely in host endianness and should work like expected. Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack") Signed-off-by:
Hauke Mehrtens <hauke.mehrtens@intel.com> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit 9060cb71 ] KASAN has found use-after-free in sockfs_setattr. The existed commit 6d8c50dc ("socket: close race condition between sock_close() and sockfs_setattr()") is to fix this simillar issue, but it seems to ignore that crypto module forgets to set the sk to NULL after af_alg_release. KASAN report details as below: BUG: KASAN: use-after-free in sockfs_setattr+0x120/0x150 Write of size 4 at addr ffff88837b956128 by task syz-executor0/4186 CPU: 2 PID: 4186 Comm: syz-executor0 Not tainted xxx + #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0xca/0x13e print_address_description+0x79/0x330 ? vprintk_func+0x5e/0xf0 kasan_report+0x18a/0x2e0 ? sockfs_setattr+0x120/0x150 sockfs_setattr+0x120/0x150 ? sock_register+0x2d0/0x2d0 notify_change+0x90c/0xd40 ? chown_common+0x2ef/0x510 chown_common+0x2ef/0x510 ? chmod_common+0x3b0/0x3b0 ? __lock_is_held+0xbc/0x160 ? __sb_start_write+0x13d/0x2b0 ? __mnt_want_write+0x19a/0x250 do_fchownat+0x15c/0x190 ? __ia32_sys_chmod+0x80/0x80 ? trace_hardirqs_on_thunk+0x1a/0x1c __x64_sys_fchownat+0xbf/0x160 ? lockdep_hardirqs_on+0x39a/0x5e0 do_syscall_64+0xc8/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462589 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb4b2c83c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000104 RAX: ffffffffffffffda RBX: 000000000072bfa0 RCX: 0000000000462589 RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000007 RBP: 0000000000000005 R08: 0000000000001000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb4b2c846bc R13: 00000000004bc733 R14: 00000000006f5138 R15: 00000000ffffffff Allocated by task 4185: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x14a/0x350 sk_prot_alloc+0xf6/0x290 sk_alloc+0x3d/0xc00 af_alg_accept+0x9e/0x670 hash_accept+0x4a3/0x650 __sys_accept4+0x306/0x5c0 __x64_sys_accept4+0x98/0x100 do_syscall_64+0xc8/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4184: __kasan_slab_free+0x12e/0x180 kfree+0xeb/0x2f0 __sk_destruct+0x4e6/0x6a0 sk_destruct+0x48/0x70 __sk_free+0xa9/0x270 sk_free+0x2a/0x30 af_alg_release+0x5c/0x70 __sock_release+0xd3/0x280 sock_close+0x1a/0x20 __fput+0x27f/0x7f0 task_work_run+0x136/0x1b0 exit_to_usermode_loop+0x1a7/0x1d0 do_syscall_64+0x461/0x580 entry_SYSCALL_64_after_hwframe+0x49/0xbe Syzkaller reproducer: r0 = perf_event_open(&(0x7f0000000000)={0x0, 0x70, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, @perf_config_ext}, 0x0, 0x0, 0xffffffffffffffff, 0x0) r1 = socket$alg(0x26, 0x5, 0x0) getrusage(0x0, 0x0) bind(r1, &(0x7f00000001c0)=@alg={0x26, 'hash\x00', 0x0, 0x0, 'sha256-ssse3\x00'}, 0x80) r2 = accept(r1, 0x0, 0x0) r3 = accept4$unix(r2, 0x0, 0x0, 0x0) r4 = dup3(r3, r0, 0x0) fchownat(r4, &(0x7f00000000c0)='\x00', 0x0, 0x0, 0x1000) Fixes: 6d8c50dc ("socket: close race condition between sock_close() and sockfs_setattr()") Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Petr Machata authored
[ Upstream commit 28946040 ] The function-local variable "delay" enters the loop interpreted as delay in bits. However, inside the loop it gets overwritten by the result of mlxsw_sp_pg_buf_delay_get(), and thus leaves the loop as quantity in cells. Thus on second and further loop iterations, the headroom for a given priority is configured with a wrong size. Fix by introducing a loop-local variable, delay_cells. Rename thres to thres_cells for consistency. Fixes: f417f04d ("mlxsw: spectrum: Refactor port buffer configuration") Signed-off-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit 07bd14cc ] Add the missing unlock before return from function set_fan_div() in the error handling case. Fixes: c9c63915 ("hwmon: (lm80) fix a missing check of the status of SMBus read") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 4179cb5a ] netif_rx() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Note this patch also fixes a small issue that came with commit ce6502a8 ("vxlan: fix a use after free in vxlan_encap_bypass"), since the dev->stats.rx_dropped change was done on the wrong device. Fixes: d342894c ("vxlan: virtual extensible lan") Fixes: ce6502a8 ("vxlan: fix a use after free in vxlan_encap_bypass") Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 225d9464 ] In the unlikely event that the kmalloc call in vmci_transport_socket_init() fails, we end-up calling vmci_transport_destruct() with a NULL vmci_trans() and oopsing. This change addresses the above explicitly checking for zero vmci_trans() at destruction time. Reported-by:
Xiumei Mu <xmu@redhat.com> Fixes: d021c344 ("VSOCK: Introduce VM Sockets") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit c09551c6 ] According to the algorithm described in the comment block at the beginning of ip_rt_send_redirect, the host should try to send 'ip_rt_redirect_number' ICMP redirect packets with an exponential backoff and then stop sending them at all assuming that the destination ignores redirects. If the device has previously sent some ICMP error packets that are rate-limited (e.g TTL expired) and continues to receive traffic, the redirect packets will never be transmitted. This happens since peer->rate_tokens will be typically greater than 'ip_rt_redirect_number' and so it will never be reset even if the redirect silence timeout (ip_rt_redirect_silence) has elapsed without receiving any packet requiring redirects. Fix it by using a dedicated counter for the number of ICMP redirect packets that has been sent by the host I have not been able to identify a given commit that introduced the issue since ip_rt_send_redirect implements the same rate-limiting algorithm from commit 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Zhiqiang Liu authored
[ Upstream commit e75913c9 ] Follow those steps: # ip addr add 2001:123::1/32 dev eth0 # ip addr add 2001:123:456::2/64 dev eth0 # ip addr del 2001:123::1/32 dev eth0 # ip addr del 2001:123:456::2/64 dev eth0 and then prefix route of 2001:123::1/32 will still exist. This is because ipv6_prefix_equal in check_cleanup_prefix_route func does not check whether two IPv6 addresses have the same prefix length. If the prefix of one address starts with another shorter address prefix, even though their prefix lengths are different, the return value of ipv6_prefix_equal is true. Here I add a check of whether two addresses have the same prefix to decide whether their prefixes are equal. Fixes: 5b84efec ("ipv6 addrconf: don't cleanup prefix route for IFA_F_NOPREFIXROUTE") Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Reported-by:
Wenhao Zhang <zhangwenhao8@huawei.com> Signed-off-by:
-
John David Anglin authored
[ Upstream commit 7c0db24c ] The GPIO interrupt controller on the espressobin board only supports edge interrupts. If one enables the use of hardware interrupts in the device tree for the 88E6341, it is possible to miss an edge. When this happens, the INTn pin on the Marvell switch is stuck low and no further interrupts occur. I found after adding debug statements to mv88e6xxx_g1_irq_thread_work() that there is a race in handling device interrupts (e.g. PHY link interrupts). Some interrupts are directly cleared by reading the Global 1 status register. However, the device interrupt flag, for example, is not cleared until all the unmasked SERDES and PHY ports are serviced. This is done by reading the relevant SERDES and PHY status register. The code only services interrupts whose status bit is set at the time of reading its status register. If an interrupt event occurs after its status is read and before all interrupts are serviced, then this event will not be serviced and the INTn output pin will remain low. This is not a problem with polling or level interrupts since the handler will be called again to process the event. However, it's a big problem when using level interrupts. The fix presented here is to add a loop around the code servicing switch interrupts. If any pending interrupts remain after the current set has been handled, we loop and process the new set. If there are no pending interrupts after servicing, we are sure that INTn has gone high and we will get an edge when a new event occurs. Tested on espressobin board. Fixes: dc30c35b ("net: dsa: mv88e6xxx: Implement interrupt support.") Signed-off-by:
John David Anglin <dave.anglin@bell.net> Tested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 20 Feb, 2019 20 commits
-
-
Greg Kroah-Hartman authored
-
Hauke Mehrtens authored
commit da360299 upstream. This fixes a compile problem of some user space applications by not including linux/libc-compat.h in uapi/if_ether.h. linux/libc-compat.h checks which "features" the header files, included from the libc, provide to make the Linux kernel uapi header files only provide no conflicting structures and enums. If a user application mixes kernel headers and libc headers it could happen that linux/libc-compat.h gets included too early where not all other libc headers are included yet. Then the linux/libc-compat.h would not prevent all the redefinitions and we run into compile problems. This patch removes the include of linux/libc-compat.h from uapi/if_ether.h to fix the recently introduced case, but not all as this is more or less impossible. It is no problem to do the check directly in the if_ether.h file and not in libc-compat.h as this does not need any fancy glibc header detection as glibc never provided struct ethhdr and should define __UAPI_DEF_ETHHDR by them self when they will provide this. The following test program did not compile correctly any more: #include <linux/if_ether.h> #include <netinet/in.h> #include <linux/in.h> int main(void) { return 0; } Fixes: 6926e041 ("uapi/if_ether.h: prevent redefinition of struct ethhdr") Reported-by:
Guillaume Nault <g.nault@alphalink.fr> Cc: <stable@vger.kernel.org> # 4.15 Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Christian Lamparter authored
commit a86caa9b upstream. Sven Eckelmann reported an issue with the current IPQ4019 pinctrl. Setting up any gpio-hog in the device-tree for his device would "kill the bootup completely": | [ 0.477838] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 0.499828] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferring probe | [ 1.298883] requesting hog GPIO enable USB2 power (chip 1000000.pinctrl, offset 58) failed, -517 | [ 1.299609] gpiochip_add_data: GPIOs 0..99 (1000000.pinctrl) failed to register | [ 1.308589] ipq4019-pinctrl 1000000.pinctrl: Failed register gpiochip | [ 1.316586] msm_serial 78af000.serial: could not find pctldev for node /soc/pinctrl@1000000/serial_pinmux, deferring probe | [ 1.322415] spi_qup 78b5000.spi: could not find pctldev for node /soc/pinctrl@1000000/spi_0_pinmux, deferri This was also verified on a RT-AC58U (IPQ4018) which would no longer boot, if a gpio-hog was specified. (Tried forcing the USB LED PIN (GPIO0) to high.). The problem is that Pinctrl+GPIO registration is currently peformed in the following order in pinctrl-msm.c: 1. pinctrl_register() 2. gpiochip_add() 3. gpiochip_add_pin_range() The actual error code -517 == -EPROBE_DEFER is coming from pinctrl_get_device_gpio_range(), which is called through: gpiochip_add of_gpiochip_add of_gpiochip_scan_gpios gpiod_hog gpiochip_request_own_desc __gpiod_request chip->request gpiochip_generic_request pinctrl_gpio_request pinctrl_get_device_gpio_range pinctrl_get_device_gpio_range() is unable to find any valid pin ranges, since nothing has been added to the pinctrldev_list yet. so the range can't be found, and the operation fails with -EPROBE_DEFER. This patch fixes the issue by adding the "gpio-ranges" property to the pinctrl device node of all upstream Qcom SoC. The pin ranges are then added by the gpio core. In order to remain compatible with older, existing DTs (and ACPI) a check for the "gpio-ranges" property has been added to msm_gpio_init(). This prevents the driver of adding the same entry to the pinctrldev_list twice. Reported-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Thomas Gleixner authored
commit da791a66 upstream. Stefan reported, that the glibc tst-robustpi4 test case fails occasionally. That case creates the following race between sys_exit() and sys_futex_lock_pi(): CPU0 CPU1 sys_exit() sys_futex() do_exit() futex_lock_pi() exit_signals(tsk) No waiters: tsk->flags |= PF_EXITING; *uaddr == 0x00000PID mm_release(tsk) Set waiter bit exit_robust_list(tsk) { *uaddr = 0x80000PID; Set owner died attach_to_pi_owner() { *uaddr = 0xC0000000; tsk = get_task(PID); } if (!tsk->flags & PF_EXITING) { ... attach(); tsk->flags |= PF_EXITPIDONE; } else { if (!(tsk->flags & PF_EXITPIDONE)) return -EAGAIN; return -ESRCH; <--- FAIL } ESRCH is returned all the way to user space, which triggers the glibc test case assert. Returning ESRCH unconditionally is wrong here because the user space value has been changed by the exiting task to 0xC0000000, i.e. the FUTEX_OWNER_DIED bit is set and the futex PID value has been cleared. This is a valid state and the kernel has to handle it, i.e. taking the futex. Cure it by rereading the user space value when PF_EXITING and PF_EXITPIDONE is set in the task which 'owns' the futex. If the value has changed, let the kernel retry the operation, which includes all regular sanity checks and correctly handles the FUTEX_OWNER_DIED case. If it hasn't changed, then return ESRCH as there is no way to distinguish this case from malfunctioning user space. This happens when the exiting task did not have a robust list, the robust list was corrupted or the user space value in the futex was simply bogus. Reported-by:
Stefan Liebler <stli@linux.ibm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Darren Hart <dvhart@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sashal@kernel.org> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=200467 Link: https://lkml.kernel.org/r/20181210152311.986181245@linutronix.deSigned-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
-
Pavankumar Kondeti authored
commit 3054426d upstream. commit 3f5fe9fe ("sched/debug: Fix task state recording/printout") tried to fix the problem introduced by a previous commit efb40f58 ("sched/tracing: Fix trace_sched_switch task-state printing"). However the prev_state output in sched_switch is still broken. task_state_index() uses fls() which considers the LSB as 1. Left shifting 1 by this value gives an incorrect mapping to the task state. Fix this by decrementing the value returned by __get_task_state() before shifting. Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org Cc: stable@vger.kernel.org Fixes: 3f5fe9fe ("sched/debug: Fix task state recording/printout") Signed-off-by:
Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Joonas Lahtinen authored
commit 2e7bd10e upstream. Make sure the underlying VMA in the process address space is the same as it was during vm_mmap to avoid applying WC to wrong VMA. A more long-term solution would be to have vm_mmap_locked variant in linux/mmap.h for when caller wants to hold mmap_sem for an extended duration. v2: - Refactor the compare function Fixes: 1816f923 ("drm/i915: Support creation of unbound wc user mappings for objects") Reported-by:
Adam Zabrocki <adamza@microsoft.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.0+ Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Adam Zabrocki <adamza@microsoft.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20190207085454.10598-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 5c4604e7) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Nikos Tsironis authored
commit 4ae280b4 upstream. When provisioning a new data block for a virtual block, either because the block was previously unallocated or because we are breaking sharing, if the whole block of data is being overwritten the bio that triggered the provisioning is issued immediately, skipping copying or zeroing of the data block. When this bio completes the new mapping is inserted in to the pool's metadata by process_prepared_mapping(), where the bio completion is signaled to the upper layers. This completion is signaled without first committing the metadata. If the bio in question has the REQ_FUA flag set and the system crashes right after its completion and before the next metadata commit, then the write is lost despite the REQ_FUA flag requiring that I/O completion for this request must only be signaled after the data has been committed to non-volatile storage. Fix this by deferring the completion of overwrite bios, with the REQ_FUA flag set, until after the metadata has been committed. Cc: stable@vger.kernel.org Signed-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Acked-by:
Joe Thornber <ejt@redhat.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit ff0c129d upstream. bio_sectors() returns the value in the units of 512-byte sectors (no matter what the real sector size of the device). dm-crypt multiplies bio_sectors() by on_disk_tag_size to calculate the space allocated for integrity tags. If dm-crypt is running with sector size larger than 512b, it allocates more data than is needed. Device Mapper trims the extra space when passing the bio to dm-integrity, so this bug didn't result in any visible misbehavior. But it must be fixed to avoid wasteful memory allocation for the block integrity payload. Fixes: ef43aa38 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Cc: stable@vger.kernel.org # 4.12+ Reported-by:
Milan Broz <mbroz@redhat.com> Signed-off-by:
-
Borislav Petkov authored
commit 10970e1b upstream. dump_thread32() in aout_core_dump() does not clear the user32 structure allocated on the stack as the first thing on function entry. As a result, the dump.u_comm, dump.u_ar0 and dump.signal which get assigned before the clearing, get overwritten. Rename that function to fill_dump() to make it clear what it does and call it first thing. This was caught while staring at a patch by Derek Robson <robsonde@gmail.com>. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Derek Robson <robsonde@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Matz <matz@suse.de> Cc: x86@kernel.org Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20190202005512.3144-1-robsonde@gmail.comSigned-off-by:
-
Nate Dailey authored
commit dfcc34c9 upstream. sync_request_write no longer submits writes to a Faulty device. This has the unfortunate side effect that bitmap bits can be incorrectly cleared if a recovery is interrupted (previously, end_sync_write would have prevented this). This means the next recovery may not copy everything it should, potentially corrupting data. Add a function for doing the proper md_bitmap_end_sync, called from end_sync_write and the Faulty case in sync_request_write. backport note to 4.14: s/md_bitmap_end_sync/bitmap_end_sync Cc: stable@vger.kernel.org 4.14+ Fixes: 0c9d5b12 ("md/raid1: avoid reusing a resync bio after error handling.") Reviewed-by:
Jack Wang <jinpu.wang@cloud.ionos.com> Tested-by:
Nate Dailey <nate.dailey@stratus.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
-
Eric W. Biederman authored
commit cf43a757 upstream. In the middle of do_exit() there is there is a call "ptrace_event(PTRACE_EVENT_EXIT, code);" That call places the process in TACKED_TRACED aka "(TASK_WAKEKILL | __TASK_TRACED)" and waits for for the debugger to release the task or SIGKILL to be delivered. Skipping past dequeue_signal when we know a fatal signal has already been delivered resulted in SIGKILL remaining pending and TIF_SIGPENDING remaining set. This in turn caused the scheduler to not sleep in PTACE_EVENT_EXIT as it figured a fatal signal was pending. This also caused ptrace_freeze_traced in ptrace_check_attach to fail because it left a per thread SIGKILL pending which is what fatal_signal_pending tests for. This difference in signal state caused strace to report strace: Exit of unknown pid NNNNN ignored Therefore update the signal handling state like dequeue_signal would when removing a per thread SIGKILL, by removing SIGKILL from the per thread signal mask and clearing TIF_SIGPENDING. Acked-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Ivan Delalande <colona@arista.com> Cc: stable@vger.kernel.org Fixes: 35634ffa ("signal: Always notice exiting tasks") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Hedi Berriche authored
commit f331e766 upstream. Calls into UV firmware must be protected against concurrency, expose the efi_runtime_lock to the UV platform, and use it to serialise UV BIOS calls. Signed-off-by:
Hedi Berriche <hedi.berriche@hpe.com> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Russ Anderson <rja@hpe.com> Reviewed-by:
Dimitri Sivanich <sivanich@hpe.com> Reviewed-by:
Mike Travis <mike.travis@hpe.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Bhupesh Sharma <bhsharma@redhat.com> Cc: Darren Hart <dvhart@infradead.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-efi <linux-efi@vger.kernel.org> Cc: platform-driver-x86@vger.kernel.org Cc: stable@vger.kernel.org # v4.9+ Cc: Steve Wahl <steve.wahl@hpe.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190213193413.25560-5-hedi.berriche@hpe.comSigned-off-by:
-
Andreas Ziegler authored
commit 0722069a upstream. When printing multiple uprobe arguments as strings the output for the earlier arguments would also include all later string arguments. This is best explained in an example: Consider adding a uprobe to a function receiving two strings as parameters which is at offset 0xa0 in strlib.so and we want to print both parameters when the uprobe is hit (on x86_64): $ echo 'p:func /lib/strlib.so:0xa0 +0(%di):string +0(%si):string' > \ /sys/kernel/debug/tracing/uprobe_events When the function is called as func("foo", "bar") and we hit the probe, the trace file shows a line like the following: [...] func: (0x7f7e683706a0) arg1="foobar" arg2="bar" Note the extra "bar" printed as part of arg1. This behaviour stacks up for additional string arguments. The strings are stored in a dynamically growing part of the uprobe buffer by fetch_store_string() after copying them from userspace via strncpy_from_user(). The return value of strncpy_from_user() is then directly used as the required size for the string. However, this does not take the terminating null byte into account as the documentation for strncpy_from_user() cleary states that it "[...] returns the length of the string (not including the trailing NUL)" even though the null byte will be copied to the destination. Therefore, subsequent calls to fetch_store_string() will overwrite the terminating null byte of the most recently fetched string with the first character of the current string, leading to the "accumulation" of strings in earlier arguments in the output. Fix this by incrementing the return value of strncpy_from_user() by one if we did not hit the maximum buffer size. Link: http://lkml.kernel.org/r/20190116141629.5752-1-andreas.ziegler@fau.de Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 5baaa59e ("tracing/probes: Implement 'memory' fetch method for uprobes") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Andreas Ziegler <andreas.ziegler@fau.de> Signed-off-by:
-
Meelis Roos authored
commit bfc91368 upstream. Eiger machine vector definition has nr_irqs 128, and working 2.6.26 boot shows SCSI getting IRQ-s 64 and 65. Current kernel boot fails because Symbios SCSI fails to request IRQ-s and does not find the disks. It has been broken at least since 3.18 - the earliest I could test with my gcc-5. The headers have moved around and possibly another order of defines has worked in the past - but since 128 seems to be correct and used, fix arch/alpha/include/asm/irq.h to have NR_IRQS=128 for Eiger. This fixes 4.19-rc7 boot on my Force Flexor A264 (Eiger subarch). Cc: stable@vger.kernel.org # v3.18+ Signed-off-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Sergei Trofimovich authored
commit 491af60f upstream. Fix page fault handling code to fixup r16-r18 registers. Before the patch code had off-by-two registers bug. This bug caused overwriting of ps,pc,gp registers instead of fixing intended r16,r17,r18 (see `struct pt_regs`). More details: Initially Dmitry noticed a kernel bug as a failure on strace test suite. Test passes unmapped userspace pointer to io_submit: ```c #include <err.h> #include <unistd.h> #include <sys/mman.h> #include <asm/unistd.h> int main(void) { unsigned long ctx = 0; if (syscall(__NR_io_setup, 1, &ctx)) err(1, "io_setup"); const size_t page_size = sysconf(_SC_PAGESIZE); const size_t size = page_size * 2; void *ptr = mmap(NULL, size, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (MAP_FAILED == ptr) err(1, "mmap(%zu)", size); if (munmap(ptr, size)) err(1, "munmap"); syscall(__NR_io_submit, ctx, 1, ptr + page_size); syscall(__NR_io_destroy, ctx); return 0; } ``` Running this test causes kernel to crash when handling page fault: ``` Unable to handle kernel paging request at virtual address ffffffffffff9468 CPU 3 aio(26027): Oops 0 pc = [<fffffc00004eddf8>] ra = [<fffffc00004edd5c>] ps = 0000 Not tainted pc is at sys_io_submit+0x108/0x200 ra is at sys_io_submit+0x6c/0x200 v0 = fffffc00c58e6300 t0 = fffffffffffffff2 t1 = 000002000025e000 t2 = fffffc01f159fef8 t3 = fffffc0001009640 t4 = fffffc0000e0f6e0 t5 = 0000020001002e9e t6 = 4c41564e49452031 t7 = fffffc01f159c000 s0 = 0000000000000002 s1 = 000002000025e000 s2 = 0000000000000000 s3 = 0000000000000000 s4 = 0000000000000000 s5 = fffffffffffffff2 s6 = fffffc00c58e6300 a0 = fffffc00c58e6300 a1 = 0000000000000000 a2 = 000002000025e000 a3 = 00000200001ac260 a4 = 00000200001ac1e8 a5 = 0000000000000001 t8 = 0000000000000008 t9 = 000000011f8bce30 t10= 00000200001ac440 t11= 0000000000000000 pv = fffffc00006fd320 at = 0000000000000000 gp = 0000000000000000 sp = 00000000265fd174 Disabling lock debugging due to kernel taint Trace: [<fffffc0000311404>] entSys+0xa4/0xc0 ``` Here `gp` has invalid value. `gp is s overwritten by a fixup for the following page fault handler in `io_submit` syscall handler: ``` __se_sys_io_submit ... ldq a1,0(t1) bne t0,4280 <__se_sys_io_submit+0x180> ``` After a page fault `t0` should contain -EFALUT and `a1` is 0. Instead `gp` was overwritten in place of `a1`. This happens due to a off-by-two bug in `dpf_reg()` for `r16-r18` (aka `a0-a2`). I think the bug went unnoticed for a long time as `gp` is one of scratch registers. Any kernel function call would re-calculate `gp`. Dmitry tracked down the bug origin back to 2.1.32 kernel version where trap_a{0,1,2} fields were inserted into struct pt_regs. And even before that `dpf_reg()` contained off-by-one error. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: linux-alpha@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reported-and-reviewed-by:
"Dmitry V. Levin" <ldv@altlinux.org> Cc: stable@vger.kernel.org # v2.1.32+ Bug: https://bugs.gentoo.org/672040Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
Sandeep Patil authored
commit 27dd768e upstream. The 'pss_locked' field of smaps_rollup was being calculated incorrectly. It accumulated the current pss everytime a locked VMA was found. Fix that by adding to 'pss_locked' the same time as that of 'pss' if the vma being walked is locked. Link: http://lkml.kernel.org/r/20190203065425.14650-1-sspatil@android.com Fixes: 493b0e9d ("mm: add /proc/pid/smaps_rollup") Signed-off-by:
Sandeep Patil <sspatil@android.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Daniel Colascione <dancol@google.com> Cc: <stable@vger.kernel.org> [4.14.x, 4.19.x] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Matti Kurkela authored
commit e8b22d0a upstream. Like Fujitsu CELSIUS H760, the H780 also has a three-button Elantech touchpad, but the driver needs to be told so to enable the middle touchpad button. The elantech_dmi_force_crc_enabled quirk was not necessary with the H780. Also document the fw_version and caps values detected for both H760 and H780 models. Signed-off-by:
Matti Kurkela <Matti.Kurkela@iki.fi> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Jonathan Bakker authored
commit 90cc55f0 upstream. Otherwise we introduce a race condition where userspace can request input before we're ready leading to null pointer dereference such as input: bma150 as /devices/platform/i2c-gpio-2/i2c-5/5-0038/input/input3 Unable to handle kernel NULL pointer dereference at virtual address 00000018 pgd = (ptrval) [00000018] *pgd=55dac831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: bma150 input_polldev [last unloaded: bma150] CPU: 0 PID: 2870 Comm: accelerometer Not tainted 5.0.0-rc3-dirty #46 Hardware name: Samsung S5PC110/S5PV210-based board PC is at input_event+0x8/0x60 LR is at bma150_report_xyz+0x9c/0xe0 [bma150] pc : [<80450f70>] lr : [<7f0a614c>] psr: 800d0013 sp : a4c1fd78 ip : 00000081 fp : 00020000 r10: 00000000 r9 : a5e2944c r8 : a7455000 r7 : 00000016 r6 : 00000101 r5 : a7617940 r4 : 80909048 r3 : fffffff2 r2 : 00000000 r1 : 00000003 r0 : 00000000 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 54e34019 DAC: 00000051 Process accelerometer (pid: 2870, stack limit = 0x(ptrval)) Stackck: (0xa4c1fd78 to 0xa4c20000) fd60: fffffff3 fc813f6c fd80: 40410581 d7530ce3 a5e2817c a7617f00 a5e29404 a5e2817c 00000000 7f008324 fda0: a5e28000 8044f59c a5fdd9d0 a5e2945c a46a4a00 a5e29668 a7455000 80454f10 fdc0: 80909048 a5e29668 a5fdd9d0 a46a4a00 806316d0 00000000 a46a4a00 801df5f0 fde0: 00000000 d7530ce3 a4c1fec0 a46a4a00 00000000 a5fdd9d0 a46a4a08 801df53c fe00: 00000000 801d74bc a4c1fec0 00000000 a4c1ff70 00000000 a7038da8 00000000 fe20: a46a4a00 801e91fc a411bbe0 801f2e88 00000004 00000000 80909048 00000041 fe40: 00000000 00020000 00000000 dead4ead a6a88da0 00000000 ffffe000 806fcae8 fe60: a4c1fec8 00000000 80909048 00000002 a5fdd9d0 a7660110 a411bab0 00000001 fe80: dead4ead ffffffff ffffffff a4c1fe8c a4c1fe8c d7530ce3 20000013 80909048 fea0: 80909048 a4c1ff70 00000001 fffff000 a4c1e000 00000005 00026038 801eabd8 fec0: a7660110 a411bab0 b9394901 00000006 a696201b 76fb3000 00000000 a7039720 fee0: a5fdd9d0 00000101 00000002 00000096 00000000 00000000 00000000 a4c1ff00 ff00: a6b310f4 805cb174 a6b310f4 00000010 00000fe0 00000010 a4c1e000 d7530ce3 ff20: 00000003 a5f41400 a5f41424 00000000 a6962000 00000000 00000003 00000002 ff40: ffffff9c 000a0000 80909048 d7530ce3 a6962000 00000003 80909048 ffffff9c ff60: a6962000 801d890c 00000000 00000000 00020000 a7590000 00000004 00000100 ff80: 00000001 d7530ce3 000288b8 00026320 000288b8 00000005 80101204 a4c1e000 ffa0: 00000005 80101000 000288b8 00026320 000288b8 000a0000 00000000 00000000 ffc0: 000288b8 00026320 000288b8 00000005 7eef3bac 000264e8 00028ad8 00026038 ffe0: 00000005 7eef3300 76f76e91 76f78546 800d0030 000288b8 00000000 00000000 [<80450f70>] (input_event) from [<a5e2817c>] (0xa5e2817c) Code: e1a08148 eaffffa8 e351001f 812fff1e (e590c018) ---[ end trace 1c691ee85f2ff243 ]--- Signed-off-by:
Jonathan Bakker <xc-racer2@live.ca> Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Xiaoyao Li authored
commit 98ae70cc upstream. Commit ca83b4a7 ("x86/KVM/VMX: Add find_msr() helper function") introduces the helper function find_msr(), which returns -ENOENT when not find the msr in vmx->msr_autoload.guest/host. Correct checking contion of no more available entry in vmx->msr_autoload. Fixes: ca83b4a7 ("x86/KVM/VMX: Add find_msr() helper function") Cc: stable@vger.kernel.org Signed-off-by:
Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Manuel Reinhardt authored
commit 2bc16b9f upstream. The commit a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
