- 11 Oct, 2013 1 commit
-
-
Sunil Dutt authored
The information of the peer's supported channels and supported operating classes are required for the driver to perform TDLS off channel operations. This commit enhances the function nl80211_(new)set_station to pass this information of the peer to the driver. Signed-off-by:
Sunil Dutt <c_duttus@qti.qualcomm.com> [return errors for malformed tuples] Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 09 Oct, 2013 1 commit
-
-
Luis R. Rodriguez authored
It is incorrect to refer to this as 11d as 802.11d was just a proposed amendment, 802.11d was merged to the standard so use proper terminology. Signed-off-by:
Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by:
-
- 08 Oct, 2013 1 commit
-
-
Luis R. Rodriguez authored
The names are prefixed incorrectly on the documentation. Signed-off-by:
-
- 02 Oct, 2013 2 commits
-
-
Arik Nemtsov authored
Limit the current implementation to a single channel context used by a single vif, thereby avoiding multi-vif/channel complexities. Reuse the main function from AP CSA code, but move a portion out in order to fit the STA scenario. Add a new mac80211 HW flag so we don't break devices that don't support channel switch with channel-contexts. The new behavior will be opt-in. Signed-off-by:
Arik Nemtsov <arik@wizery.com> Signed-off-by:
-
cedric Voncken authored
If the VLAN tci is set in skb->vlan_tci use the priority field to determine the WMM priority. Signed-off-by:
cedric Voncken <cedric.voncken@acksys.fr> Signed-off-by:
-
- 01 Oct, 2013 9 commits
-
-
Johannes Berg authored
If allowed in a country, these channels typically require DFS so mark them as such. Channel 144 is a bit special, it's coming into use now to allow more VHT 80 channels, but world roaming with passive scanning is acceptable anyway. It seems fairly unlikely that it'll be used as the control channel for a VHT AP, but it needs to be present to allow a full VHT connection to an AP that uses it as one of the secondary channels. Also enable VHT 160 on these channels, and also for channels 36-48 to be able to use VHT 160 there. Signed-off-by: -
Simon Wunderlich authored
A CAC should fail if it is triggered while the interface is already running. Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by:
-
Fred Zhou authored
Move the default setting for WMM parameters outside the for loop to avoid redundant assignment multiple times. Signed-off-by:
Fred Zhou <fred.zy@gmail.com> Signed-off-by:
-
Michal Kazior authored
Some devices may not be able to report A-MSDUs in single buffers. Drivers for such devices were forced to re-assemble A-MSDUs which would then be eventually disassembled by mac80211. This could lead to CPU cache thrashing and poor performance. Since A-MSDU has a single sequence number all subframes share it. This was in conflict with retransmission/duplication recovery (IEEE802.11-2012: 9.3.2.10). Patch introduces a new flag that is meant to be set for all individually reported A-MSDU subframes except the last one. This ensures the last_seq_ctrl is updated after the last subframe is processed. If an A-MSDU is actually a duplicate transmission all reported subframes will be properly discarded. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> [johannes: add braces that were missing even before] Signed-off-by:
-
Fred Zhou authored
The authentication frame has a fixied size of 30 bytes (including header, algo num, trans seq num, and status) followed by a variable challenge text. Allocate using exact size, instead of over-allocation by sizeof(ieee80211_mgmt). Signed-off-by:
-
Janusz Dziedzic authored
Add support for parsing and setting the dfs region (ETSI, FCC, JP) when the internal regulatory database is used. Before this the DFS region was being ignored even if present on the used db.txt Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by:
-
Johannes Berg authored
This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: -
Eliad Peller authored
VHT_CAP_BEAMFORMER_ANTENNAS cap is actually defined in the draft as VHT_CAP_BEAMFORMEE_STS_MAX, and its size is 3 bits long. VHT_CAP_SOUNDING_DIMENSIONS is also 3 bits long. Fix the definitions and change the cap masking accordingly. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
-
Eliad Peller authored
In some debugfs related functions snprintf was used while scnprintf should have been used instead. (blindly adding the return value of snprintf and supplying it to the next snprintf might result in buffer overflow when the input is too big) Signed-off-by:
-
- 26 Sep, 2013 12 commits
-
-
Simon Wunderlich authored
Signed-off-by:
-
Simon Wunderlich authored
IBSS members may not immediately be able to send out their beacon when performing CSA, therefore also send a CSA action frame. Signed-off-by:
-
Simon Wunderlich authored
This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by:
-
Simon Wunderlich authored
IBSS CSA will require to disconnect if a channel switch fails, but mac80211 should search and re-connect after this disconnect. To allow such usage, split off the ibss disconnect process in a separate function which only performs the disconnect without overwriting nl80211-supplied parameters. Signed-off-by:
-
Simon Wunderlich authored
The channel switch parsing function can be re-used for the IBSS code, put the common part into an extra function. Signed-off-by:
-
Simon Wunderlich authored
It will be used later by the IBSS CSA implementation of mac80211. Signed-off-by:
-
Lorenzo Bianconi authored
Do not override max_tp_rate, max_tp_rate2 and max_prob_rate configured according to fixed_rate in minstrel_ht_update_stats throughput computation Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Lorenzo Bianconi authored
Add the capability to use a fixed modulation rate to minstrel rate controller Signed-off-by:
-
Stanislaw Gruszka authored
Since when we detect beacon lost we do active AP probing (using nullfunc frame or probe request) there is no need to have beacon polling. Flags IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons. Change also make that after we start connection poll due to beacon loss, next received beacon will abort the poll. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Sergey Ryazanov authored
Remove superfluous call and use locally stored previous result. Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
-
Johannes Berg authored
No need for ERR_PTR(PTR_ERR()) since there's ERR_CAST, use it. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Johannes Berg authored
If it is needed to disconnect multiple virtual interfaces after (WoWLAN-) suspend, the most obvious approach would be to iterate all interfaces by calling ieee80211_iterate_active_interfaces() and then call ieee80211_resume_disconnect() for each one. This is what the iwlmvm driver does. Unfortunately, this causes a locking dependency from mac80211's iflist_mtx to the key_mtx. This is problematic as the former is intentionally never held while calling any driver operation to allow drivers to iterate with their own locks held. The key_mtx is held while installing a key into the driver though, so this new lock dependency means drivers implementing the logic above can no longer hold their own lock while iterating. To fix this, add a new ieee80211_iterate_active_interfaces_rtnl() function that iterates while the RTNL is already held. This is true during suspend/resume, so that then the locking dependency isn't introduced. While at it, also refactor the various interface iterators and keep only a single implementation called by the various cases. Signed-off-by:
-
- 16 Sep, 2013 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer code update from Thomas Gleixner: - armada SoC clocksource overhaul with a trivial merge conflict - Minor improvements to various SoC clocksource drivers * 'timers/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: armada-370-xp: Add detailed clock requirements in devicetree binding clocksource: armada-370-xp: Get reference fixed-clock by name clocksource: armada-370-xp: Replace WARN_ON with BUG_ON clocksource: armada-370-xp: Fix device-tree binding clocksource: armada-370-xp: Introduce new compatibles clocksource: armada-370-xp: Use CLOCKSOURCE_OF_DECLARE clocksource: armada-370-xp: Simplify TIMER_CTRL register access clocksource: armada-370-xp: Use BIT() ARM: timer-sp: Set dynamic irq affinity ARM: nomadik: add dynamic irq flag to the timer clocksource: sh_cmt: 32-bit control register support clocksource: em_sti: Convert to devm_* managed helpers
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French: "Two minor cifs fixes and a minor documentation cleanup for cifs.txt" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs.txt and remove some outdated infos cifs: Avoid calling unlock_page() twice in cifs_readpage() when using fscache cifs: Do not take a reference to the page in cifs_readpage_worker()
-
git://git.infradead.org/linux-ubiLinus Torvalds authored
Pull UBI fixes from Artem Bityutskiy: "Just a single fastmap fix plus a regression fix" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubi: UBI: Fix invalidate_fastmap() UBI: Fix PEB leak in wear_leveling_worker()
-
git://git.infradead.org/linux-ubifsLinus Torvalds authored
Pull ubifs fix from Artem Bityutskiy: "Just one patch which fixes the power-cut recovery testing mode. I'll start using a single UBI/UBIFS tree instead of 2 trees from now on. So in the future you'll get 1 small pull request instead of 2 tiny ones" * tag 'upstream-3.12-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: remove invalid warn msg with tst_recovery enabled
-
- 15 Sep, 2013 7 commits
-
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS fixes from Ralf Baechle: "These are four patches for three construction sites: - Fix register decoding for the combination of multi-core processors and multi-threading. - Two more fixes that are part of the ongoing DECstation resurrection work. One of these touches a DECstation-only network driver. - Finally Markos' trivial build fix for the AP/SP support. (With this applied now all MIPS defconfigs are building again)" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: kernel: vpe: Make vpe_attrs an array of pointers. MIPS: Fix SMP core calculations when using MT support. MIPS: DECstation I/O ASIC DMA interrupt handling fix MIPS: DECstation HRT initialization rearrangement -
git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds authored
Pull x86 platform updates from Matthew Garrett: "Nothing amazing here, almost entirely cleanups and minor bugfixes and one bit of hardware enablement in the amilo-rfkill driver" * 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: platform/x86: panasonic-laptop: reuse module_acpi_driver samsung-laptop: fix config build error platform: x86: remove unnecessary platform_set_drvdata() amilo-rfkill: Enable using amilo-rfkill with the FSC Amilo L1310. wmi: parse_wdg() should return kernel error codes hp_wmi: Fix unregister order in hp_wmi_rfkill_setup() platform: replace strict_strto*() with kstrto*() x86: irst: use module_acpi_driver to simplify the code x86: smartconnect: use module_acpi_driver to simplify the code platform samsung-q10: use ACPI instead of direct EC calls thinkpad_acpi: add the ability setting TPACPI_LED_NONE by quirk thinkpad_acpi: return -NODEV while operating uninitialized LEDs
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI driver updates from James Bottomley: "This patch set is a set of driver updates (megaraid_sas, fnic, lpfc, ufs, hpsa) we also have a couple of bug fixes (sd out of bounds and ibmvfc error handling) and the first round of esas2r checker fixes and finally the much anticipated big endian additions for megaraid_sas" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (47 commits) [SCSI] fnic: fnic Driver Tuneables Exposed through CLI [SCSI] fnic: Kernel panic while running sh/nosh with max lun cfg [SCSI] fnic: Hitting BUG_ON(io_req->abts_done) in fnic_rport_exch_reset [SCSI] fnic: Remove QUEUE_FULL handling code [SCSI] fnic: On system with >1.1TB RAM, VIC fails multipath after boot up [SCSI] fnic: FC stat param seconds_since_last_reset not getting updated [SCSI] sd: Fix potential out-of-bounds access [SCSI] lpfc 8.3.42: Update lpfc version to driver version 8.3.42 [SCSI] lpfc 8.3.42: Fixed issue of task management commands having a fixed timeout [SCSI] lpfc 8.3.42: Fixed inconsistent spin lock usage. [SCSI] lpfc 8.3.42: Fix driver's abort loop functionality to skip IOs already getting aborted [SCSI] lpfc 8.3.42: Fixed failure to allocate SCSI buffer on PPC64 platform for SLI4 devices [SCSI] lpfc 8.3.42: Fix WARN_ON when driver unloads [SCSI] lpfc 8.3.42: Avoided making pci bar ioremap call during dual-chute WQ/RQ pci bar selection [SCSI] lpfc 8.3.42: Fixed driver iocbq structure's iocb_flag field running out of space [SCSI] lpfc 8.3.42: Fix crash on driver load due to cpu affinity logic [SCSI] lpfc 8.3.42: Fixed logging format of setting driver sysfs attributes hard to interpret [SCSI] lpfc 8.3.42: Fixed back to back RSCNs discovery failure. [SCSI] lpfc 8.3.42: Fixed race condition between BSG I/O dispatch and timeout handling [SCSI] lpfc 8.3.42: Fixed function mode field defined too small for not recognizing dual-chute mode ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linuxLinus Torvalds authored
Pull SLAB update from Pekka Enberg: "Nothing terribly exciting here apart from Christoph's kmalloc unification patches that brings sl[aou]b implementations closer to each other" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: slab: Use correct GFP_DMA constant slub: remove verify_mem_not_deleted() mm/sl[aou]b: Move kmallocXXX functions to common code mm, slab_common: add 'unlikely' to size check of kmalloc_slab() mm/slub.c: beautify code for removing redundancy 'break' statement. slub: Remove unnecessary page NULL check slub: don't use cpu partial pages on UP mm/slub: beautify code for 80 column limitation and tab alignment mm/slub: remove 'per_cpu' which is useless variable
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input update from Dmitry Torokhov: "The only change is David Hermann's new EVIOCREVOKE evdev ioctl that allows safely passing file descriptors to input devices to session processes and later being able to stop delivery of events through these fds so that inactive sessions will no longer receive user input that does not belong to them" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: evdev - add EVIOCREVOKE ioctl
-
Linus Torvalds authored
Sedat points out that I transposed some letters in "LRU" and wrote "RLU" instead in one of the new comments explaining the flow. Let's just fix it. Reported-by:
Sedat Dilek <sedat.dilek@jpberlin.de> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
Matt found that commit 27a7c642 ("partitions/efi: account for pmbr size in lba") caused his GPT formatted eMMC device not to boot. The reason is that this commit enforced Linux to always check the lesser of the whole disk or 2Tib for the pMBR size in LBA. While most disk partitioning tools out there create a pMBR with these characteristics, Microsoft does not, as it always sets the entry to the maximum 32-bit limitation - even though a drive may be smaller than that[1]. Loosen this check and only verify that the size is either the whole disk or 0xFFFFFFFF. No tool in its right mind would set it to any value other than these. [1] http://thestarman.pcministry.com/asm/mbr/GPT.htm#GPTPTReported-and-tested-by:
Matt Porter <matt.porter@linaro.org> Signed-off-by:
Davidlohr Bueso <davidlohr@hp.com> Signed-off-by:
-
- 14 Sep, 2013 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds authored
Pull writeback fix from Wu Fengguang: "A trivial writeback fix" * tag 'writeback-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Do not sort b_io list only because of block device inode
-
Linus Torvalds authored
The LRU list changes interacted badly with our nr_dentry_unused accounting, and even worse with the new DCACHE_LRU_LIST bit logic. This introduces helper functions to make sure everything follows the proper dcache d_lru list rules: the dentry cache is complicated by the fact that some of the hotpaths don't even want to look at the LRU list at all, and the fact that we use the same list entry in the dentry for both the LRU list and for our temporary shrinking lists when removing things from the LRU. The helper functions temporarily have some extra sanity checking for the flag bits that have to match the current LRU state of the dentry. We'll remove that before the final 3.12 release, but considering how easy it is to get wrong, this first cleanup version has some very particular sanity checking. Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
