- 13 May, 2024 16 commits
-
-
Matthieu Baerts (NGI0) authored
A way for an application to know if an MPTCP connection fell back to TCP is to use getsockopt(MPTCP_INFO) and look for errors. The issue with this technique is that the same errors -- EOPNOTSUPP (IPv4) and ENOPROTOOPT (IPv6) -- are returned if there was a fallback, *or* if the kernel doesn't support this socket option. The userspace then has to look at the kernel version to understand what the errors mean. It is not clean, and it doesn't take into account older kernels where the socket option has been backported. A cleaner way would be to expose this info to the TCP socket level. In case of MPTCP socket where no fallback happened, the socket options for the TCP level will be handled in MPTCP code, in mptcp_getsockopt_sol_tcp(). If not, that will be in TCP code, in do_tcp_getsockopt(). So MPTCP simply has to set the value 1, while TCP has to set 0. If the socket option is not supported, one of these two errors will be reported: - EOPNOTSUPP (95 - Operation not supported) for MPTCP sockets - ENOPROTOOPT (92 - Protocol not available) for TCP sockets, e.g. on the socket received after an 'accept()', when the client didn't request to use MPTCP: this socket will be a TCP one, even if the listen socket was an MPTCP one. With this new option, the kernel can return a clear answer to both "Is this kernel new enough to tell me the fallback status?" and "If it is new enough, is it currently a TCP or MPTCP socket?" questions, while not breaking the previous method. Acked-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240509-upstream-net-next-20240509-mptcp-tcp_is_mptcp-v1-1-f846df999202@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Richard Gobert says: ==================== net: gro: remove network_header use, move p->{flush/flush_id} calculations to L4 The cb fields network_offset and inner_network_offset are used instead of skb->network_header throughout GRO. These fields are then leveraged in the next commit to remove flush_id state from napi_gro_cb, and stateful code in {ipv6,inet}_gro_receive which may be unnecessarily complicated due to encapsulation support in GRO. These fields are checked in L4 instead. 3rd patch adds tests for different flush_id flows in GRO. ==================== Link: https://lore.kernel.org/r/20240509190819.2985-1-richardbgobert@gmail.comSigned-off-by: -
Richard Gobert authored
Added flush id selftests to test different cases where DF flag is set or unset and id value changes in the following packets. All cases where the packets should coalesce or should not coalesce are tested. Signed-off-by:
Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240509190819.2985-4-richardbgobert@gmail.comSigned-off-by:
-
Richard Gobert authored
{inet,ipv6}_gro_receive functions perform flush checks (ttl, flags, iph->id, ...) against all packets in a loop. These flush checks are used in all merging UDP and TCP flows. These checks need to be done only once and only against the found p skb, since they only affect flush and not same_flow. This patch leverages correct network header offsets from the cb for both outer and inner network headers - allowing these checks to be done only once, in tcp_gro_receive and udp_gro_receive_segment. As a result, NAPI_GRO_CB(p)->flush is not used at all. In addition, flush_id checks are more declarative and contained in inet_gro_flush, thus removing the need for flush_id in napi_gro_cb. This results in less parsing code for non-loop flush tests for TCP and UDP flows. To make sure results are not within noise range - I've made netfilter drop all TCP packets, and measured CPU performance in GRO (in this case GRO is responsible for about 50% of the CPU utilization). perf top while replaying 64 parallel IP/TCP streams merging in GRO: (gro_receive_network_flush is compiled inline to tcp_gro_receive) net-next: 6.94% [kernel] [k] inet_gro_receive 3.02% [kernel] [k] tcp_gro_receive patch applied: 4.27% [kernel] [k] tcp_gro_receive 4.22% [kernel] [k] inet_gro_receive perf top while replaying 64 parallel IP/IP/TCP streams merging in GRO (same results for any encapsulation, in this case inet_gro_receive is top offender in net-next) net-next: 10.09% [kernel] [k] inet_gro_receive 2.08% [kernel] [k] tcp_gro_receive patch applied: 6.97% [kernel] [k] inet_gro_receive 3.68% [kernel] [k] tcp_gro_receive Signed-off-by: -
Richard Gobert authored
This patch converts references of skb->network_header to napi_gro_cb's network_offset and inner_network_offset. Signed-off-by:
-
Jakub Kicinski authored
David Arinzon says: ==================== ENA driver changes May 2024 This patchset contains several misc and minor changes to the ENA driver. ==================== Link: https://lore.kernel.org/r/20240512134637.25299-1-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
For the purpose of obtaining better CPU utilization, minimum rx moderation interval is set to 20 usec. Signed-off-by:
Osama Abboud <osamaabb@amazon.com> Signed-off-by:
David Arinzon <darinzon@amazon.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240512134637.25299-6-darinzon@amazon.comSigned-off-by:
-
David Arinzon authored
strscpy copies as much of the string as possible, meaning that the destination string will be truncated in case of no space. As this is a non-critical error in our case, adding a debug level print for indication. This patch also removes a -1 which was added to ensure enough space for NUL, but strscpy destination string is guaranteed to be NUL-terminted, therefore, the -1 is not needed. Signed-off-by:
-
David Arinzon authored
Validate that `first` flag is set only for the first descriptor in multi-buffer packets. In case of an invalid descriptor, a reset will occur. A new reset reason for RX data corruption has been added. Signed-off-by:
Shahar Itzko <itzko@amazon.com> Signed-off-by:
-
David Arinzon authored
This patch makes two changes in order to fill holes and reduce ther overall size of the structures ena_com_dev and ena_com_rx_ctx. Signed-off-by:
-
David Arinzon authored
This patch adds a counter to the ena_adapter struct in order to keep track of reset failures. The counter is incremented every time either ena_restore_device() or ena_destroy_device() fail. Signed-off-by:
-
Florian Westphal authored
Now that this test runs in netdev CI it looks like 10s isn't enough for debug kernels: selftests: net/netfilter: nft_flowtable.sh 2024/05/10 20:33:08 socat[12204] E write(7, 0x563feb16a000, 8192): Broken pipe FAIL: file mismatch for ns1 -> ns2 -rw------- 1 root root 37345280 May 10 20:32 /tmp/tmp.Am0yEHhNqI ... Looks like socat gets zapped too quickly, so increase timeout to 1m. Could also reduce tx file size for KSFT_MACHINE_SLOW, but its preferrable to have same test for both debug and nondebug. Signed-off-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240511064814.561525-1-fw@strlen.deSigned-off-by:
-
Vladimir Oltean authored
Joachim kindly merged the IPv6 support in https://github.com/troglobit/mtools/pull/2, so we can just use his version now. A few more fixes subsequently came in for IPv6, so even better. Check that the deployed mtools version is 3.0 or above. Note that the version check breaks compatibility with my fork where I didn't bump the version, but I assume that won't be a problem. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20240510112856.1262901-1-vladimir.oltean@nxp.comSigned-off-by:
-
Colin Ian King authored
There is a spelling mistake in a TH_LOG message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Daniel Golle authored
Setting LED_OFF via brightness_set should deactivate hw control, so make sure netdev trigger rules also get cleared in that case. This fixes unwanted restoration of the default netdev trigger rules and matches the behaviour when using the 'netdev' trigger without any hardware offloading. Fixes: 71e79430 ("net: phy: air_en8811h: Add the Airoha EN8811H PHY driver") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/5ed8ea615890a91fa4df59a7ae8311bbdf63cdcf.1715248281.git.daniel@makrotopia.orgSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 skips transaction if object type provides no .update interface. Patch #2 skips NETDEV_CHANGENAME which is unused. Patch #3 enables conntrack to handle Multicast Router Advertisements and Multicast Router Solicitations from the Multicast Router Discovery protocol (RFC4286) as untracked opposed to invalid packets. From Linus Luessing. Patch #4 updates DCCP conntracker to mark invalid as invalid, instead of dropping them, from Jason Xing. Patch #5 uses NF_DROP instead of -NF_DROP since NF_DROP is 0, also from Jason. Patch #6 removes reference in netfilter's sysctl documentation on pickup entries which were already removed by Florian Westphal. Patch #7 removes check for IPS_OFFLOAD flag to disable early drop which allows to evict entries from the conntrack table, also from Florian. Patches #8 to #16 updates nf_tables pipapo set backend to allocate the datastructure copy on-demand from preparation phase, to better deal with OOM situations where .commit step is too late to fail. Series from Florian Westphal. Patch #17 adds a selftest with packetdrill to cover conntrack TCP state transitions, also from Florian. Patch #18 use GFP_KERNEL to clone elements from control plane to avoid quick atomic reserves exhaustion with large sets, reporter refers to million entries magnitude. * tag 'nf-next-24-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: allow clone callbacks to sleep selftests: netfilter: add packetdrill based conntrack tests netfilter: nft_set_pipapo: remove dirty flag netfilter: nft_set_pipapo: move cloning of match info to insert/removal path netfilter: nft_set_pipapo: prepare pipapo_get helper for on-demand clone netfilter: nft_set_pipapo: merge deactivate helper into caller netfilter: nft_set_pipapo: prepare walk function for on-demand clone netfilter: nft_set_pipapo: prepare destroy function for on-demand clone netfilter: nft_set_pipapo: make pipapo_clone helper return NULL netfilter: nft_set_pipapo: move prove_locking helper around netfilter: conntrack: remove flowtable early-drop test netfilter: conntrack: documentation: remove reference to non-existent sysctl netfilter: use NF_DROP instead of -NF_DROP netfilter: conntrack: dccp: try not to drop skb in conntrack netfilter: conntrack: fix ct-state for ICMPv6 Multicast Router Discovery netfilter: nf_tables: remove NETDEV_CHANGENAME from netdev chain event handler netfilter: nf_tables: skip transaction if update object is not implemented ==================== Link: https://lore.kernel.org/r/20240512161436.168973-1-pablo@netfilter.orgSigned-off-by:
-
- 11 May, 2024 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-05-08 (most Intel drivers) This series contains updates to i40e, iavf, ice, igb, igc, e1000e, and ixgbe drivers. Asbjørn Sloth Tønnesen adds checks against supported flower control flags for i40e, iavf, ice, and igb drivers. Michal corrects filters removed during eswitch release for ice. Corinna Vinschen defers PTP initialization to later in probe so that netdev log entry is initialized on igc. Ilpo Järvinen removes a couple of unused, duplicate defines on e1000e and ixgbe. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: net: e1000e & ixgbe: Remove PCI_HEADER_TYPE_MFD duplicates igc: fix a log entry using uninitialized netdev ice: remove correct filters during eswitch release igb: flower: validate control flags ice: flower: validate control flags iavf: flower: validate control flags i40e: flower: validate control flags ==================== Link: https://lore.kernel.org/r/20240508173342.2760994-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Asbjørn Sloth Tønnesen says: ==================== net: qede: convert filter code to use extack This series converts the filter code in the qede driver to use NL_SET_ERR_MSG_*(extack, ...) for error handling. Patch 1-12 converts qede_parse_flow_attr() to use extack, along with all it's static helper functions. qede_parse_flow_attr() is used in two places: - qede_add_tc_flower_fltr() - qede_flow_spec_to_rule() In the latter call site extack is faked in the same way as is done in mlxsw (patch 12). While the conversion is going on, some error messages are silenced in between patch 1-12. If wanted could squash patch 1-12 in a v3, but I felt that it would be easier to review as 12 more trivial patches. Patch 13 and 14, finishes up by converting qede_parse_actions(), and ensures that extack is propagated to it, in both call contexts. v1: https://lore.kernel.org/netdev/20240507104421.1628139-1-ast@fiberby.net/ ==================== Link: https://lore.kernel.org/r/20240508143404.95901-1-ast@fiberby.netSigned-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert DP_NOTICE/DP_INFO to NL_SET_ERR_MSG_MOD. Keep edev around for use with QEDE_RSS_COUNT(). Only compile tested. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by:
-
Asbjørn Sloth Tønnesen authored
Pass extack to qede_flow_spec_validate() when called in qede_flow_spec_to_rule(). Pass extack to qede_parse_actions(). Not converting qede_flow_spec_validate() to use extack for errors, as it's only called from qede_flow_spec_to_rule(), where extack is faked into a DP_NOTICE anyway, so opting to keep DP_VERBOSE/DP_NOTICE usage. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Since qede_parse_flow_attr() now does error reporting through extack, then give it a fake extack and extract the error message afterwards if one was set. The extracted error message is then passed on through DP_NOTICE(), including messages that was earlier issued with DP_INFO(). This fake extack approach is already used by mlxsw_env_linecard_modules_power_mode_apply() in drivers/net/ethernet/mellanox/mlxsw/core_env.c Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_parse_flow_attr() to take extack, and drop the edev argument. Convert DP_NOTICE calls to use NL_SET_ERR_MSG_* instead. Pass extack in calls to qede_flow_parse_{tcp,udp}_v{4,6}(). In calls to qede_parse_flow_attr(), if extack is unavailable, then use NULL for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by: -
Asbjørn Sloth Tønnesen authored
Define extack locally, to reduce line lengths and aid future users. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_udp_v4() to take extack, and drop the edev argument. Pass extack in call to qede_flow_parse_v4_common(). In call to qede_flow_parse_udp_v4(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_udp_v6() to take extack, and drop the edev argument. Pass extack in call to qede_flow_parse_v6_common(). In call to qede_flow_parse_udp_v6(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_tcp_v4() to take extack, and drop the edev argument. Pass extack in call to qede_flow_parse_v4_common(). In call to qede_flow_parse_tcp_v4(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_tcp_v6() to take extack, and drop the edev argument. Pass extack in call to qede_flow_parse_v6_common(). In call to qede_flow_parse_tcp_v6(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_v4_common() to take extack, and drop the edev argument. Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead. Pass extack in calls to qede_flow_parse_ports() and qede_set_v4_tuple_to_profile(). In calls to qede_flow_parse_v4_common(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_v6_common() to take extack, and drop the edev argument. Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead. Pass extack in calls to qede_flow_parse_ports() and qede_set_v6_tuple_to_profile(). In calls to qede_flow_parse_v6_common(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_set_v4_tuple_to_profile() to take extack, and drop the edev argument. Convert DP_INFO call to use NL_SET_ERR_MSG_MOD instead. In calls to qede_set_v4_tuple_to_profile(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_set_v6_tuple_to_profile() to take extack, and drop the edev argument. Convert DP_INFO call to use NL_SET_ERR_MSG_MOD instead. In calls to qede_set_v6_tuple_to_profile(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Convert qede_flow_parse_ports to use extack, and drop the edev argument. Convert DP_NOTICE call to use NL_SET_ERR_MSG_MOD instead. In calls to qede_flow_parse_ports(), use NULL as extack for now, until a subsequent patch makes extack available. Only compile tested. Signed-off-by:
-
Eric Dumazet authored
Some usb drivers try to set small skb->truesize and break core networking stacks. In this patch, I removed one of the skb->truesize override. I also replaced one skb_clone() by an allocation of a fresh and small skb, to get minimally sized skbs, like we did in commit 1e2c6117 ("net: cdc_ncm: reduce skb truesize in rx path") and 4ce62d5b ("net: usb: ax88179_178a: stop lying about skb->truesize") v3: also fix a sparse error ( https://lore.kernel.org/oe-kbuild-all/202405091310.KvncIecx-lkp@intel.com/ ) v2: leave the skb_trim() game because smsc95xx_rx_csum_offload() needs the csum part. (Jakub) While we are it, use get_unaligned() in smsc95xx_rx_csum_offload(). Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Reviewed-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
-
Kuniyuki Iwashima authored
Commit 1af2dfac ("af_unix: Don't access successor in unix_del_edges() during GC.") fixed use-after-free by avoid accessing edge->successor while GC is in progress. However, there could be a small race window where another process could call unix_del_edges() while gc_in_progress is true and __skb_queue_purge() is on the way. So, we need another marker for struct scm_fp_list which indicates if the skb is garbage-collected. This patch adds dead flag in struct scm_fp_list and set it true before calling __skb_queue_purge(). Fixes: 1af2dfac ("af_unix: Don't access successor in unix_del_edges() during GC.") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240508171150.50601-1-kuniyu@amazon.comSigned-off-by:
-
Andy Shevchenko authored
linux/gpio.h is deprecated and subject to remove. The driver doesn't use it directly, replace it with what is really being used. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
-
Hariprasad Kelam authored
Real number of Transmit queues are incremented when user enables HTB class and vice versa. Depending on SKB priority driver returns transmit queue (Txq). Transmit queues and Send queues are one-to-one mapped. In few scenarios, Driver is returning transmit queue value which is greater than real number of transmit queue and Stack detects this as error and overwrites transmit queue value. For example user has added two classes and real number of queues are incremented accordingly - tc class add dev eth1 parent 1: classid 1:1 htb rate 100Mbit ceil 100Mbit prio 1 quantum 1024 - tc class add dev eth1 parent 1: classid 1:2 htb rate 100Mbit ceil 200Mbit prio 7 quantum 1024 now if user deletes the class with id 1:1, driver decrements the real number of queues - tc class del dev eth1 classid 1:1 But for the class with id 1:2, driver is returning transmit queue value which is higher than real number of transmit queue leading to below error eth1 selects TX queue x, but real number of TX queues is x This patch solves the problem by assigning deleted class transmit queue/send queue to active class. Signed-off-by:Hariprasad Kelam <hkelam@marvell.com> Reviewed-by:
-
Jakub Kicinski authored
Simon Horman says: ==================== gve: Minor cleanups This short patchset provides two minor cleanups for the gve driver. These were found by tooling as mentioned in each patch, and otherwise by inspection. No change in run time behaviour is intended. Each patch is compile tested only. v1: https://lore.kernel.org/r/20240503-gve-comma-v1-0-b50f965694ef@kernel.org ==================== Link: https://lore.kernel.org/r/20240508-gve-comma-v2-0-1ac919225f13@kernel.orgSigned-off-by:
-
Simon Horman authored
Make use of standard helpers to simplify filling in stats strings. The first two ethtool_puts() changes address the following fortification warnings flagged by W=1 builds with clang-18. (The last ethtool_puts change does not because the warning relates to writing beyond the first element of an array, and gve_gstrings_priv_flags only has one element.) .../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] 562 | __read_overflow2_field(q_size_field, size); | ^ .../fortify-string.h:562:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] Likewise, the same changes resolve the same problems flagged by Smatch. .../gve_ethtool.c:100 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_main_stats' too small (32 vs 576) .../gve_ethtool.c:120 gve_get_strings() error: __builtin_memcpy() '*gve_gstrings_adminq_stats' too small (32 vs 512) Compile tested only. Reviewed-by:Shailend Chand <shailend@google.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by:
Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20240508-gve-comma-v2-2-1ac919225f13@kernel.orgSigned-off-by:
-
Simon Horman authored
Although it does not seem to have any untoward side-effects, the use of ';' to separate to assignments seems more appropriate than ','. Flagged by clang-18 -Wcomma No functional change intended. Compile tested only. Reviewed-by:
-
