- 27 Apr, 2007 18 commits
-
-
Haavard Skinnemoen authored
Reorder some instructions and change the register usage to reduce the number of pipeline stalls. Also use the bfextu and bfins instructions for bitfield manipulations instead of shifting and masking. This makes gzipping a 80MB file approximately 2% faster. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Add board code and defconfig for the ATNGW100 Network Gateway kit. For more information about this board, see http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4102Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Using readb/writeb to implement these breaks NOR flash support. I can't see any reason why regular memcpy and memset shouldn't work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Since the core setup code takes care of both allocation and reservation of framebuffer memory, there's no need for this board- specific hook anymore. Replace it with two global variables, fbmem_start and fbmem_size, which can be used directly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
With the current strategy of using the bootmem allocator to allocate or reserve framebuffer memory, there's a slight chance that the requested area has been taken by the boot allocator bitmap before we get around to reserving it. By inserting the framebuffer region as a reserved region as early as possible, we improve our chances for success and we make the region visible as a reserved region in dmesg and /proc/iomem without any extra work. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Use struct resource to specify both physical memory regions and reserved regions and push everything into the same framework, including kernel code/data and initrd memory. This allows us to get rid of many special cases in the bootmem initialization and will also make it easier to implement more robust handling of framebuffer memory later. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Fix the I/O access macros so that they work with externally connected devices accessed in little-endian mode over any bus width: * Use a set of macros to define I/O port- and memory operations borrowed from MIPS. * Allow subarchitecture to specify address- and data-mangling * Implement at32ap-specific port mangling (with build-time configurable bus width. Only one bus width at a time supported for now.) * Rewrite iowriteN and friends to use write[bwl] and friends (not the __raw counterparts.) This has been tested using pata_pcmcia to access a CompactFlash card connected to the EBI (16-bit bus width.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Fix a problem with the NMI handler entry code related to the NMI handler sharing some code with the exception handlers. This is not a good idea because the RSR and RAR registers are not the same, and the NMI handler runs with interrupts masked the whole time so there's no need to check for pending work. Open-code the low-level NMI handling logic instead so that the pt_regs layout is actually correct when the higher-level handler is called. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
* Use generic BUG() handling * Remove some useless debug statements * Use a common function _exception() to send signals or oops when an exception can't be handled. This makes sure init doesn't enter an infinite exception loop as well. Borrowed from powerpc. * Add some basic exception tracing support to the page fault code. * Rework dump_stack(), show_regs() and friends and move everything into process.c * Print information about configuration options and chip type when oopsing Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Clean up the cpu identification code, using definitions from <asm/sysreg.h> instead of hardcoded constants. Also, add a features bitmap to struct avr32_cpuinfo to allow other code to make decisions based upon what the running cpu is actually capable of. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Fix indentation and remove spurious comments in asm-avr32/sysreg.h Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Bring the code that sets the initial PM clock masks in line with the comment preceding it by only enabling clocks that have users != 0. Fix SM clock definition and avr32_hpt_init() so that the SM and TC0 clocks keep ticking. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
This patch puts the CPU in sleep 0 when doing nothing, idle. This will turn of the CPU clock and thus save power. The CPU is waken again when an interrupt occurs. Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
Due to limitation of the count-compare system timer (not able to count when CPU is in sleep), the system timer had to be changed to use a peripheral timer/counter. The old COUNT-COMPARE code is still present in time.c as weak functions. The new timer is added to the architecture directory. This patch sets up TC0 as system timer The new timer has been tested on AT32AP7000/ATSTK1000 at 100 Hz, 250 Hz, 300 Hz and 1000 Hz. For more details about the timer/counter see the datasheet for AT32AP700x available at http://www.atmel.com/dyn/products/product_card.asp?part_id=3903Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
Include at32ap-specific Kconfig file from top-level Kconfig file. The at32ap Kconfig is currently empty, but it will grow some machine- specific options soon. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Hans-Christian Egtvedt authored
Complete the SMC configuration code by adding nwait and tdf parameter. After this change, we support the same parameters as the hardware. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
Haavard Skinnemoen authored
This adds register and clock definitions for the High-speed bus Matrix (HMATRIX) as well as a function that can be used to configure special EBI functionality like CompactFlash and NAND flash support. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
-
- 26 Apr, 2007 1 commit
-
-
Linus Torvalds authored
.. ok, enough waffling about it already. "Just do it!" Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Apr, 2007 7 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [PARPORT] SUNBPP: Fix OOPS when debugging is enabled. [SPARC] openprom: Switch to ref counting PCI API
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETLINK]: Infinite recursion in netlink.
-
Andrew Morton authored
The packet driver is assuming (reasonably) that the (undocumented) request.errors is an errno. But it is in fact some mysterious bitfield. When things go wrong we return weird positive numbers to the VFS as pointers and it goes oops. Thanks to William Heimbigner for reporting and diagnosis. (It doesn't oops, but this driver still doesn't work for William) Cc: William Heimbigner <icxcnika@mar.tar.cc> Cc: Peter Osterlund <petero2@telia.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Kuznetsov authored
Reply to NETLINK_FIB_LOOKUP messages were misrouted back to kernel, which resulted in infinite recursion and stack overflow. The bug is present in all kernel versions since the feature appeared. The patch also makes some minimal cleanup: 1. Return something consistent (-ENOENT) when fib table is missing 2. Do not crash when queue is empty (does not happen, but yet) 3. Put result of lookup Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jens Axboe authored
There's a really rare and obscure bug in CFQ, that causes a crash in cfq_dispatch_insert() due to rq == NULL. One example of the resulting oops is seen here: http://lkml.org/lkml/2007/4/15/41 Neil correctly diagnosed the situation for how this can happen: if two concurrent requests with the exact same sector number (due to direct IO or aliasing between MD and the raw device access), the alias handling will add the request to the sortlist, but next_rq remains NULL. Read the more complete analysis at: http://lkml.org/lkml/2007/4/25/57 This looks like it requires md to trigger, even though it should potentially be possible to due with O_DIRECT (at least if you edit the kernel and doctor some of the unplug calls). The fix is to move the ->next_rq update to when we add a request to the rbtree. Then we remove the possibility for a request to exist in the rbtree code, but not have ->next_rq correctly updated. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YOSHIFUJI Hideaki authored
Oops, thinko. The test for accempting a RH0 was exatly the wrong way around. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BNX2]: Fix occasional NETDEV WATCHDOG on 5709. [IPV6]: Disallow RH0 by default. [XFRM]: beet: fix pseudo header length value [TCP]: Congestion control initialization.
-
- 24 Apr, 2007 14 commits
-
-
Michael Chan authored
Tweak a register setting to prevent the tx mailbox from halting. Update version to 1.5.8. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
A security issue is emerging. Disallow Routing Header Type 0 by default as we have been doing for IPv4. Note: We allow RH2 by default because it is harmless. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ralf Baechle authored
This did cause oprofile to fail on non-multithreaded systems with more than 2 processors such as the BCM1480. Reported by Manish Lachwani (mlachwani@mvista.com). Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: drivers/net/hamradio/baycom_ser_fdx build fix usb-net/pegasus: fix pegasus carrier detection sis900: Allocate rx replacement buffer before rx operation [netdrvr] depca: handle platform_device_add() failure
-
Andrew Morton authored
sparc64: drivers/net/hamradio/baycom_ser_fdx.c: In function `ser12_open': drivers/net/hamradio/baycom_ser_fdx.c:417: error: `NR_IRQS' undeclared (first us e in this function) drivers/net/hamradio/baycom_ser_fdx.c:417: error: (Each undeclared identifier is reported only once drivers/net/hamradio/baycom_ser_fdx.c:417: error: for each function it appears i n.) Cc: Folkert van Heusden <folkert@vanheusden.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Dan Williams authored
Broken by 4a1728a2 which switched the return semantics of read_mii_word() but didn't fix usage of read_mii_word() to conform to the new semantics. Setting carrier to off based on the NO_CARRIER flag is also incorrect as that flag only triggers on TX failure and therefore isn't correct when no frames are being transmitted. Since there is already a 2*HZ MII carrier check going on, defer to that. Add a TRUST_LINK_STATUS feature flag for adapters where the LINK_STATUS flag is actually correct, and use that rather than the NO_CARRIER flag. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Neil Horman authored
The sis900 driver appears to have a bug in which the receive routine passes the skbuff holding the received frame to the network stack before refilling the buffer in the rx ring. If a new skbuff cannot be allocated, the driver simply leaves a hole in the rx ring, which causes the driver to stop receiving frames and become non-recoverable without an rmmod/insmod according to reporters. This patch reverses that order, attempting to allocate a replacement buffer first, and receiving the new frame only if one can be allocated. If no skbuff can be allocated, the current skbuf in the rx ring is recycled, dropping the current frame, but keeping the NIC operational. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
Andrea Righi authored
The following patch fixes a kernel bug in depca_platform_probe(). We don't use a dynamic pointer for pldev->dev.platform_data, so it seems that the correct way to proceed if platform_device_add(pldev) fails is to explicitly set the pldev->dev.platform_data pointer to NULL, before calling the platform_device_put(pldev), or it will be kfree'ed by platform_device_release(). Signed-off-by: Jeff Garzik <jeff@garzik.org>
-
git://one.firstfloor.org/home/andi/git/linux-2.6Linus Torvalds authored
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] i386: Fix some warnings added by earlier patch [PATCH] x86-64: Always flush all pages in change_page_attr [PATCH] x86: Remove noreplacement option [PATCH] x86-64: make GART PTEs uncacheable
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: Revert "adjust legacy IDE resource setting (v2)"
-
Jiri Kosina authored
Commit 40b36daa introduced possibility that serial8250_backup_timeout() -> serial8250_handle_port() locks port.lock without disabling irqs, thus allowing deadlock against interrupt handler (port.lock is acquired in serial8250_interrupt()). Spotted by lockdep. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
Add maintainer for fault injection support. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jiri Slaby authored
Two functions are called from __devinit context, but they are marked as __init. Fix this. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jeff Mahoney authored
The listxattr() and getxattr() operations are only protected by a read lock. As a result, if either of these operations run in parallel, a race condition exists where the xattr_root will end up being cached twice, which results in the leaking of a reference and a BUG() on umount. This patch refactors get_xa_root(), __get_xa_root(), and create_xa_root(), into one get_xa_root() function that takes the appropriate locking around the entire critical section. Reported, diagnosed and tested by Andrea Righi <a.righi@cineca.it> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Andrea Righi <a.righi@cineca.it> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Edward Shishkin <edward@namesys.com> Cc: Alex Zarochentsev <zam@namesys.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-