- 13 Nov, 2018 34 commits
-
-
Gao Feng authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit c953d635 upstream. The info->target comes from userspace and it would be used directly. So we need to add the sanity check to make sure it is a valid standard target, although the ebtables tool has already checked it. Kernel needs to validate anything coming from userspace. If the target is set as an evil value, it would break the ebtables and cause a panic. Because the non-standard target is treated as one offset. Now add one helper function ebt_invalid_target, and we would replace the macro INVALID_TARGET later. Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Cc: Loic <hackurx@opensec.fr> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com>
-
Zhi Chen authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit c8291988 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by:
Zhi Chen <zhichen@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 58152ecb ] In case skb in out_or_order_queue is the result of multiple skbs coalescing, we would like to get a proper gso_segs counter tracking, so that future tcp_drop() can report an accurate number. I chose to not implement this tracking for skbs in receive queue, since they are not dropped, unless socket is disconnected. Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 8541b21e ] In order to be able to give better diagnostics and detect malicious traffic, we need to have better sk->sk_drops tracking. Fixes: 9f5afeae ("tcp: use an RB tree for ooo receive queue") Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 72cd43ba ] Juha-Matti Tilli reported that malicious peers could inject tiny packets in out_of_order_queue, forcing very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet. out_of_order_queue rb-tree can contain thousands of nodes, iterating over all of them is not nice. Before linux-4.9, we would have pruned all packets in ofo_queue in one go, every XXXX packets. XXXX depends on sk_rcvbuf and skbs truesize, but is about 7000 packets with tcp_rmem[2] default of 6 MB. Since we plan to increase tcp_rmem[2] in the future to cope with modern BDP, can not revert to the old behavior, without great pain. Strategy taken in this patch is to purge ~12.5 % of the queue capacity. Fixes: 36a6503f ("tcp: refine tcp_prune_ofo_queue() to not drop all packets") Signed-off-by:
Juha-Matti Tilli <juha-matti.tilli@iki.fi> Acked-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 76f0dcbb ] When skb replaces another one in ooo queue, I forgot to also update tp->ooo_last_skb as well, if the replaced skb was the last one in the queue. To fix this, we simply can re-use the code that runs after an insertion, trying to merge skbs at the right of current skb. This not only fixes the bug, but also remove all small skbs that might be a subset of the new one. Example: We receive segments 2001:3001, 4001:5001 Then we receive 2001:8001 : We should replace 2001:3001 with the big skb, but also remove 4001:50001 from the queue to save space. packetdrill test demonstrating the bug 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 7> +0.100 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +0.01 < . 1001:2001(1000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001> +0.01 < . 1001:3001(2000) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1001:2001 1001:3001> Fixes: 9f5afeae ("tcp: use an RB tree for ooo receive queue") Signed-off-by:
-
Yaogong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 9f5afeae ] Over the years, TCP BDP has increased by several orders of magnitude, and some people are considering to reach the 2 Gbytes limit. Even with current window scale limit of 14, ~1 Gbytes maps to ~740,000 MSS. In presence of packet losses (or reorders), TCP stores incoming packets into an out of order queue, and number of skbs sitting there waiting for the missing packets to be received can be in the 10^5 range. Most packets are appended to the tail of this queue, and when packets can finally be transferred to receive queue, we scan the queue from its head. However, in presence of heavy losses, we might have to find an arbitrary point in this queue, involving a linear scan for every incoming packet, throwing away cpu caches. This patch converts it to a RB tree, to get bounded latencies. Yaogong wrote a preliminary patch about 2 years ago. Eric did the rebase, added ofo_last_skb cache, polishing and tests. Tested with network dropping between 1 and 10 % packets, with good success (about 30 % increase of throughput in stress tests) Next step would be to also use an RB tree for the write queue at sender side ;) Signed-off-by:
Yaogong Wang <wygivan@google.com> Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1801893 [ Upstream commit 532182cd ] Now ss can report sk_drops, we can instruct TCP to increment this per socket counter when it drops an incoming frame, to refine monitoring and debugging. Following patch takes care of listeners drops. Signed-off-by:
-
Richard Weinberger authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 37f31b6c upstream. The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Cong Wang authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 5fe23f26 upstream. There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Vineet Gupta authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit c58a584f upstream. Per ARC TLS ABI, r25 is designated TP (thread pointer register). However so far kernel didn't do any special treatment, like setting up usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime to do this, in say clone libc wrapper [1]. This was deliberate to keep kernel ABI agnostic (userspace could potentially change TP, specially for different ARC ISA say ARCompact vs. ARCv2 with different spare registers etc) However userspace setting up r25, after clone syscall opens a race, if child is not scheduled and gets a signal instead. It starts off in userspace not in clone but in a signal handler and anything TP sepcific there such as pthread_self() fails which showed up with uClibc testsuite nptl/tst-kill6 [2] Fix this by having kernel populate r25 to TP value. So this locks in ABI, but it was not going to change anyways, and fwiw is same for both ARCompact (arc700 core) and ARCvs (HS3x cores) [1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S [2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c Fixes: ARC STAR 9001378481 Cc: stable@vger.kernel.org Reported-by:
Nikita Sobolev <sobolev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Carl Huang authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 9ef0f58e upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by:
Carl Huang <cjhuang@codeaurora.org> Tested-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Prateek Sood authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 116d2f74 upstream. Deadlock during cgroup migration from cpu hotplug path when a task T is being moved from source to destination cgroup. kworker/0:0 cpuset_hotplug_workfn() cpuset_hotplug_update_tasks() hotplug_update_tasks_legacy() remove_tasks_in_empty_cpuset() cgroup_transfer_tasks() // stuck in iterator loop cgroup_migrate() cgroup_migrate_add_task() In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T. Task T will not migrate to destination cgroup. css_task_iter_start() will keep pointing to task T in loop waiting for task T cg_list node to be removed. Task T do_exit() exit_signals() // sets PF_EXITING exit_task_namespaces() switch_task_namespaces() free_nsproxy() put_mnt_ns() drop_collected_mounts() namespace_unlock() synchronize_rcu() _synchronize_rcu_expedited() schedule_work() // on cpu0 low priority worker pool wait_event() // waiting for work item to execute Task T inserted a work item in the worklist of cpu0 low priority worker pool. It is waiting for expedited grace period work item to execute. This work item will only be executed once kworker/0:0 complete execution of cpuset_hotplug_workfn(). kworker/0:0 ==> Task T ==>kworker/0:0 In case of PF_EXITING task being migrated from source to destination cgroup, migrate next available task in source cgroup. Signed-off-by:
Prateek Sood <prsood@codeaurora.org> Signed-off-by:
Tejun Heo <tj@kernel.org> [AmitP: Upstream commit cherry-pick failed, so I picked the backported changes from CAF/msm-4.9 tree instead: https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/?id=49b74f1696417b270c89cd893ca9f37088928078] Signed-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 513f86d7 upstream. If there an inode points to a block which is also some other type of metadata block (such as a block allocation bitmap), the buffer_verified flag can be set when it was validated as that other metadata block type; however, it would make a really terrible external attribute block. The reason why we use the verified flag is to avoid constantly reverifying the block. However, it doesn't take much overhead to make sure the magic number of the xattr block is correct, and this will avoid potential crashes. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> [Backported to 4.4: adjust context] Signed-off-by:
Daniel Rosenberg <drosen@google.com> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 88948914 upstream. On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093 ("of: Add device tree selftests") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Frank Rowand <frank.rowand@sony.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit f5fad711 upstream. Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by:
Hans Hult <hanshult35@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit ffe84e01 upstream. The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mike Snitzer authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 5d07384a upstream. A reload of the cache's DM table is needed during resize because otherwise a crash will occur when attempting to access smq policy entries associated with the portion of the cache that was recently extended. The reason is cache-size based data structures in the policy will not be resized, the only way to safely extend the cache is to allow for a proper cache policy initialization that occurs when the cache table is loaded. For example the smq policy's space_init(), init_allocator(), calc_hotspot_params() must be sized based on the extended cache size. The fix for this is to disallow cache resizes of this pattern: 1) suspend "cache" target's device 2) resize the fast device used for the cache 3) resume "cache" target's device Instead, the last step must be a full reload of the cache's DM table. Fixes: 66a63635 ("dm cache: add stochastic-multi-queue (smq) policy") Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 69e445ab upstream. If __device_suspend() runs asynchronously (in which case the device passed to it is in dpm_suspended_list at that point) and it returns early on an error or pending wakeup, and the power.direct_complete flag has been set for the device already, the subsequent device_resume() will be confused by that and it will call pm_runtime_enable() incorrectly, as runtime PM has not been disabled for the device by __device_suspend(). To avoid that, clear power.direct_complete if __device_suspend() is not going to disable runtime PM for the device before returning. Fixes: aae4518b (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily) Reported-by:
Al Cooper <alcooperx@gmail.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Felix Fietkau authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 211710ca upstream. key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Daniel Drake authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 08387454 upstream. On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of NVIDIA GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM] Similarly, the NVIDIA proprietary driver also fails after resume (black screen, 100% CPU usage in Xorg process). We shipped a sample to NVIDIA for diagnosis, and their response indicated that it's a problem with the parent PCI bridge (on the Intel SoC), not the GPU. Runtime suspend/resume works fine, only S3 suspend is affected. We found a workaround: on resume, rewrite the Intel PCI bridge 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In the cases that I checked, this register has value 0 and we just have to rewrite that value. Linux already saves and restores PCI config space during suspend/resume, but this register was being skipped because upon resume, it already has value 0 (the correct, pre-suspend value). Intel appear to have previously acknowledged this behaviour and the requirement to rewrite this register: https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23 Based on that, rewrite the prefetch register values even when that appears unnecessary. We have confirmed this solution on all the affected models we have in-hands (X542UQ, UX533FD, X530UN, V272UN). Additionally, this solves an issue where r8169 MSI-X interrupts were broken after S3 suspend/resume on ASUS X441UAR. This issue was recently worked around in commit 7bb05b85 ("r8169: don't use MSI-X on RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop that we had not yet patched. I suspect it will also fix the issue that was worked around in commit 7c53a722 ("r8169: don't use MSI-X on RTL8168g"). Thomas Martitz reports that this change also solves an issue where the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3 suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Peter Wu <peter@lekensteyn.nl> CC: stable@vger.kernel.org Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 02e42566 upstream. When I added the missing memory outputs, I failed to update the index of the first argument (ebx) on 32-bit builds, which broke the fallbacks. Somehow I must have screwed up my testing or gotten lucky. Add another test to cover gettimeofday() as well. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 715bd9d1 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 715bd9d1 upstream. The syscall fallbacks in the vDSO have incorrect asm constraints. They are not marked as writing to their outputs -- instead, they are marked as clobbering "memory", which is useless. In particular, gcc is smart enough to know that the timespec parameter hasn't escaped, so a memory clobber doesn't clobber it. And passing a pointer as an asm *input* does not tell gcc that the pointed-to value is changed. Add in the fact that the asm instructions weren't volatile, and gcc was free to omit them entirely unless their sole output (the return value) is used. Which it is (phew!), but that stops happening with some upcoming patches. As a trivial example, the following code: void test_fallback(struct timespec *ts) { vdso_fallback_gettime(CLOCK_MONOTONIC, ts); } compiles to: 00000000000000c0 <test_fallback>: c0: c3 retq To add insult to injury, the RCX and R11 clobbers on 64-bit builds were missing. The "memory" clobber is also unnecessary -- no ordering with respect to other memory operations is needed, but that's going to be fixed in a separate not-for-stable patch. Fixes: 2aae950b ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.orgSigned-off-by:
-
Tomi Valkeinen authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 1bafcbf5 upstream. OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies them to a userspace buffer. The code has two issues: - The user provided width and height could be large enough to overflow the calculations - The copy_to_user() can copy uninitialized memory to the userspace, which might contain sensitive kernel information. Fix these by limiting the width & height parameters, and only copying the amount of data that we actually received from the LCD. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by:
Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1801893 commit 58bc4c34 upstream. 5dd0b16c ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside the kernel unconditional to reduce #ifdef soup, but (either to avoid showing dummy zero counters to userspace, or because that code was missed) didn't update the vmstat_array, meaning that all following counters would be shown with incorrect values. This only affects kernel builds with CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n. Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com Fixes: 5dd0b16c ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Roman Gushchin <guro@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Kemi Wang <kemi.wang@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Simon Guo authored
BugLink: https://bugs.launchpad.net/bugs/1793451 When one vma was with flag VM_LOCKED|VM_LOCKONFAULT (by invoking mlock2(,MLOCK_ONFAULT)), it can again be populated with mlock() with VM_LOCKED flag only. There is a hole in mlock_fixup() which increase mm->locked_vm twice even the two operations are on the same vma and both with VM_LOCKED flags. The issue can be reproduced by following code: mlock2(p, 1024 * 64, MLOCK_ONFAULT); //VM_LOCKED|VM_LOCKONFAULT mlock(p, 1024 * 64); //VM_LOCKED Then check the increase VmLck field in /proc/pid/status(to 128k). When vma is set with different vm_flags, and the new vm_flags is with VM_LOCKED, it is not necessarily be a "new locked" vma. This patch corrects this bug by prevent mm->locked_vm from increment when old vm_flags is already VM_LOCKED. Link: http://lkml.kernel.org/r/1472554781-9835-3-git-send-email-wei.guo.simon@gmail.comSigned-off-by:
Simon Guo <wei.guo.simon@gmail.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Alexey Klimov <klimov.linux@gmail.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Simon Guo <wei.guo.simon@gmail.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> (cherry picked from commit b155b4fd) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
Kleber Souza <kleber.souza@canonical.com> Acked-by:
Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
-
Eddie.Horng authored
BugLink: https://bugs.launchpad.net/bugs/1786729 The code in cap_inode_getsecurity(), introduced by commit 8db6c34f ("Introduce v3 namespaced file capabilities"), should use d_find_any_alias() instead of d_find_alias() do handle unhashed dentry correctly. This is needed, for example, if execveat() is called with an open but unlinked overlayfs file, because overlayfs unhashes dentry on unlink. This is a regression of real life application, first reported at https://www.spinics.net/lists/linux-unionfs/msg05363.html Below reproducer and setup can reproduce the case. const char* exec="echo"; const char *newargv[] = { "echo", "hello", NULL}; const char *newenviron[] = { NULL }; int fd, err; fd = open(exec, O_PATH); unlink(exec); err = syscall(322/*SYS_execveat*/, fd, "", newargv, newenviron, AT_EMPTY_PATH); if(err<0) fprintf(stderr, "execveat: %s\n", strerror(errno)); gcc compile into ~/test/a.out mount -t overlay -orw,lowerdir=/mnt/l,upperdir=/mnt/u,workdir=/mnt/w none /mnt/m cd /mnt/m cp /bin/echo . ~/test/a.out Expected result: hello Actually result: execveat: Invalid argument dmesg: Invalid argument reading file caps for /dev/fd/3 The 2nd reproducer and setup emulates similar case but for regular filesystem: const char* exec="echo"; int fd, err; char buf[256]; fd = open(exec, O_RDONLY); unlink(exec); err = fgetxattr(fd, "security.capability", buf, 256); if(err<0) fprintf(stderr, "fgetxattr: %s\n", strerror(errno)); gcc compile into ~/test_fgetxattr cd /tmp cp /bin/echo . ~/test_fgetxattr Result: fgetxattr: Invalid argument On regular filesystem, for example, ext4 read xattr from disk and return to execveat(), will not trigger this issue, however, the overlay attr handler pass real dentry to vfs_getxattr() will. This reproducer calls fgetxattr() with an unlinked fd, involkes vfs_getxattr() then reproduced the case that d_find_alias() in cap_inode_getsecurity() can't find the unlinked dentry. Suggested-by:
Amir Goldstein <amir73il@gmail.com> Acked-by:
Serge E. Hallyn <serge@hallyn.com> Fixes: 8db6c34f ("Introduce v3 namespaced file capabilities") Cc: <stable@vger.kernel.org> # v4.14 Signed-off-by:
Eddie Horng <eddie.horng@mediatek.com> Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> (backported from commit 355139a8) Signed-off-by:
-
Julian Wiedmann authored
BugLink: http://bugs.launchpad.net/bugs/1800639 When sending an skb, afiucv_hs_send() bails out on various error conditions. But currently the caller has no way of telling whether the skb was freed or not - resulting in potentially either a) leaked skbs from iucv_send_ctrl(), or b) double-free's from iucv_sock_sendmsg(). As dev_queue_xmit() will always consume the skb (even on error), be consistent and also free the skb from all other error paths. This way callers no longer need to care about managing the skb. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Frank Heimes <frank.heimes@canonical.com> Acked-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Julian Wiedmann authored
BugLink: http://bugs.launchpad.net/bugs/1800639 Inbound packets may have any combination of flag bits set in their iucv header. If we don't know how to handle a specific combination, drop the skb instead of leaking it. To clarify what error is returned in this case, replace the hard-coded 0 with the corresponding macro. Signed-off-by:
-
Steffen Klassert authored
BugLink: https://bugs.launchpad.net/bugs/1801878 Since commit 222d7dbd ("net: prevent dst uses after free") skb_dst_force() might clear the dst_entry attached to the skb. The xfrm code don't expect this to happen, so we crash with a NULL pointer dereference in this case. Fix it by checking skb_dst(skb) for NULL after skb_dst_force() and drop the packet in cast the dst_entry was cleared. Fixes: 222d7dbd ("net: prevent dst uses after free") Reported-by:
Tobias Hommel <netdev-list@genoetigt.de> Reported-by:
Kristian Evensen <kristian.evensen@gmail.com> Reported-by:
Wolfgang Walter <linux@stwm.de> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> (backported from commit 9e143793) [kmously: minor context adjustment] Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
-
Jean Delvare authored
BugLink: https://bugs.launchpad.net/bugs/1800641 Functions qeth_get_ipa_msg and qeth_get_ipa_cmd_name are modifying the last member of global arrays without any locking that I can see. If two instances of either function are running at the same time, it could cause a race ultimately leading to an array overrun (the contents of the last entry of the array is the only guarantee that the loop will ever stop). Performing the lookups without modifying the arrays is admittedly slower (two comparisons per iteration instead of one) but these are operations which are rare (should only be needed in error cases or when debugging, not during successful operation) and it seems still less costly than introducing a mutex to protect the arrays in question. As a side bonus, it allows us to declare both arrays as const data. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Julian Wiedmann <jwi@linux.ibm.com> Cc: Ursula Braun <ubraun@linux.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
-
zhong jiang authored
BugLink: https://bugs.launchpad.net/bugs/1800641 Use the common code ARRAY_SIZE macro instead of a private implementation. Reviewed-by:
zhong jiang <zhongjiang@huawei.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Andy Whitcroft authored
BugLink: https://bugs.launchpad.net/bugs/1786013Signed-off-by:
Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by:
-
- 24 Oct, 2018 2 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by: -
Kleber Sacilotto de Souza authored
BugLink: https://bugs.launchpad.net/bugs/1799401Signed-off-by:
-
- 23 Oct, 2018 4 commits
-
-
Vegard Nossum authored
BugLink: https://bugs.launchpad.net/bugs/1793464 Quentin ran into this bug: WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80 sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid' Modules linked in: nbd CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G D 4.6.0+ #7 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790 Call Trace: [<ffffffff814b8791>] dump_stack+0x4d/0x6c [<ffffffff810d04ab>] __warn+0xdb/0x100 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30 [<ffffffff81594a76>] device_create_file+0x36/0x90 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd] [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20 [<ffffffff810efa76>] ? resched_curr+0x36/0x70 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd] [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0 [<ffffffff811aa329>] ? ____fput+0x9/0x10 [<ffffffff810e9092>] ? task_work_run+0x72/0x90 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93 ---[ end trace 7899b295e4f850c8 ]--- It seems fairly obvious that device_create_file() is not being protected from being run concurrently on the same nbd. Quentin found the following relevant commits: 1a2ad211 nbd: add locking to nbd_ioctl 90b8f282 [PATCH] end of methods switch: remove the old ones d4430d62 [PATCH] beginning of methods conversion 08f85851 [PATCH] move block_device_operations to blkdev.h It would seem that the race was introduced in the process of moving nbd from BKL to unlocked ioctls. By setting nbd->task_recv while the mutex is held, we can prevent other processes from running concurrently (since nbd->task_recv is also checked while the mutex is held). Reported-and-tested-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Markus Pargmann <mpa@pengutronix.de> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Pavel Machek <pavel@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Jens Axboe <axboe@fb.com> (backported from commit 97240963) Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1793464 We hit a warning when shutting down the nbd connection because we have irq's disabled. We don't really need to do the shutdown under the lock, just clear the nbd->sock. So do the shutdown outside of the irq. This gets rid of the warning. Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 Group all variables that are reset after a disconnect into reset functions. This patch adds two of these functions, nbd_reset() and nbd_bdev_reset(). Signed-off-by:
Markus Pargmann <mpa@pengutronix.de> (cherry picked from commit 0e4f0f6f) Signed-off-by:
-
Markus Pargmann authored
BugLink: https://bugs.launchpad.net/bugs/1793464 It may be useful to know in the client that a connection timed out. The current code returns success for a timeout. This patch reports the error code -ETIMEDOUT for a timeout. Signed-off-by:
-
