In commit 9c0ece06 ("Get rid of Documentation/feature-removal.txt"),
Linus removed feature-removal-schedule.txt from Documentation, but there
is still some reference to this file.  So remove them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 9c0ece06 ("Get rid of Documentation/feature-removal.txt"),
Linus removed feature-removal-schedule.txt from Documentation, but there
is still some reference to this file.  So remove them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 9c0ece06 ("Get rid of Documentation/feature-removal.txt"),
Linus removed feature-removal-schedule.txt from Documentation, but there
is still some reference to this file.  So remove them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit 9c0ece06 ("Get rid of Documentation/feature-removal.txt"),
Linus removed feature-removal-schedule.txt from Documentation, but there
is still some reference to this file.  So remove them.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently the __define_initcall() macro takes three arguments, fn, id and
level.  The level argument is exactly the same as the id argument but
wrapped in quotes.  To overcome this need to specify three arguments to
the __define_initcall macro, where one argument is the stringification of
another, we can just use the stringification macro instead.
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Current mem= implementation seems buggy because the specification and
implementation don't match.  The current mem= has been working for many
years and it's not buggy - it works as expected.  So we should update the
specification.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Rob Landley <rob@landley.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  - Remove the superfluous address-of ('&') operators,
  - Remove the unneeded casts, use %p to format pointers instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Nowadays it should probably use __bss_start and __bss_stop
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-4.4.4 screws this up.

  mm/memory.c: In function 'do_pmd_numa_page':
  mm/memory.c:3594: warning: no return statement in function returning non-void

Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

patch(1) doesn't create zero-length files, so my kernel didn't compile.

Put something in these files so patch(1) actually creates them.

Cc: David Howells <dhowells@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 8fa72d23.

People disagree about how this should be done, so let's revert this for
now so that nobody starts using the new tuning interface.  Tejun is
thinking about a more generic interface for thread pool affinity.
Requested-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ext3, udf, quota fixes from Jan Kara:
 "Some ext3 & quota cleanups and couple of udf fixes"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Use the pre-processor to compile out quotactl_cmd_write when !CONFIG_BLOCK
  ext3: drop if around WARN_ON
  ext3: get rid of the duplicate code on ext3_fill_super
  udf: remove un-needed variable from inode_getblk
  udf: don't increment lenExtents while writing to a hole
  udf: fix memory leak while allocating blocks during write

Pull block layer core updates from Jens Axboe:
 "Here are the core block IO bits for 3.8.  The branch contains:

   - The final version of the surprise device removal fixups from Bart.

   - Don't hide EFI partitions under advanced partition types.  It's
     fairly wide spread these days.  This is especially dangerous for
     systems that have both msdos and efi partition tables, where you
     want to keep them in sync.

   - Cleanup of using -1 instead of the proper NUMA_NO_NODE

   - Export control of bdi flusher thread CPU mask and default to using
     the home node (if known) from Jeff.

   - Export unplug tracepoint for MD.

   - Core improvements from Shaohua.  Reinstate the recursive merge, as
     the original bug has been fixed.  Add plugging for discard and also
     fix a problem handling non pow-of-2 discard limits.

  There's a trivial merge in block/blk-exec.c due to a fix that went
  into 3.7-rc at a later point than -rc4 where this is based."

* 'for-3.8/core' of git://git.kernel.dk/linux-block:
  block: export block_unplug tracepoint
  block: add plug for blkdev_issue_discard
  block: discard granularity might not be power of 2
  deadline: Allow 0ms deadline latency, increase the read speed
  partitions: enable EFI/GPT support by default
  bsg: Remove unused function bsg_goose_queue()
  block: Make blk_cleanup_queue() wait until request_fn finished
  block: Avoid scheduling delayed work on a dead queue
  block: Avoid that request_fn is invoked on a dead queue
  block: Let blk_drain_queue() caller obtain the queue lock
  block: Rename queue dead flag
  bdi: add a user-tunable cpu_list for the bdi flusher threads
  block: use NUMA_NO_NODE instead of -1
  block: recursive merge requests
  block CFQ: avoid moving request to different queue

Pull DRM updates from Dave Airlie:
 "This is the one and only next pull for 3.8, we had a regression we
  found last week, so I was waiting for that to resolve itself, and I
  ended up with some Intel fixes on top as well.

  Highlights:
   - new driver: nvidia tegra 20/30/hdmi support
   - radeon: add support for previously unused DMA engines, more HDMI
     regs, eviction speeds ups and fixes
   - i915: HSW support enable, agp removal on GEN6, seqno wrapping
   - exynos: IPP subsystem support (image post proc), HDMI
   - nouveau: display class reworking, nv20->40 z compression
   - ttm: start of locking fixes, rcu usage for lookups,
   - core: documentation updates, docbook integration, monotonic clock
     usage, move from connector to object properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (590 commits)
  drm/exynos: add gsc ipp driver
  drm/exynos: add rotator ipp driver
  drm/exynos: add fimc ipp driver
  drm/exynos: add iommu support for ipp
  drm/exynos: add ipp subsystem
  drm/exynos: support device tree for fimd
  radeon: fix regression with eviction since evict caching changes
  drm/radeon: add more pedantic checks in the CP DMA checker
  drm/radeon: bump version for CS ioctl support for async DMA
  drm/radeon: enable the async DMA rings in the CS ioctl
  drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
  drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
  drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
  drm/radeon: fix htile buffer size computation for command stream checker
  drm/radeon: fix fence locking in the pageflip callback
  drm/radeon: make indirect register access concurrency-safe
  drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss
  drm/exynos: support extended screen coordinate of fimd
  drm/exynos: fix x, y coordinates for right bottom pixel
  drm/exynos: fix fb offset calculation for plane
  ...

Michal Hocko reported that the following build error occurs if
CONFIG_NUMA_BALANCING is set without THP support

  kernel/sched/fair.c: In function ‘task_numa_work’:
  kernel/sched/fair.c:932:55: error: call to ‘__build_bug_failed’ declared with attribute error: BUILD_BUG failed

The problem is that HPAGE_PMD_SHIFT triggers a BUILD_BUG() on
!CONFIG_TRANSPARENT_HUGEPAGE. This patch addresses the problem.
Reported-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Andrea's autonuma-benchmark numa01 hits kernel BUG at huge_memory.c:1474!
in change_huge_pmd called from change_protection from change_prot_numa
from task_numa_work.

That BUG, introduced in the huge zero page commit cad7f613 ("thp:
change_huge_pmd(): make sure we don't try to make a page writable")
was trying to verify that newprot never adds write permission to an
anonymous huge page; but Automatic NUMA Balancing's 4b10e7d5 ("mm:
mempolicy: Implement change_prot_numa() in terms of change_protection()")
adds a new prot_numa path into change_huge_pmd(), which makes no use of
the newprot provided, and may retain the write bit in the pmd.

Just move the BUG_ON(pmd_write(entry)) up into the !prot_numa block.
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull MFS update from Samuel Ortiz:
 "This is the MFD patch set for the 3.8 merge window.

  We have several new drivers, most of the time coming with their sub
  devices drivers:

   - Austria Microsystem's AS3711
   - Nano River's viperboard
   - TI's TPS80031, AM335x TS/ADC,
   - Realtek's MMC/memstick card reader
   - Nokia's retu

  We also got some notable cleanups and improvements:

   - tps6586x got converted to IRQ domains.
   - tps65910 and tps65090 moved to the regmap IRQ API.
   - STMPE is now Device Tree aware.
   - A general twl6040 and twl-core cleanup, with moves to the regmap
     I/O and IRQ APIs and a conversion to the recently added PWM
     framework.
   - sta2x11 gained regmap support.

  Then the rest is mostly tiny cleanups and fixes, among which we have
  Mark's wm5xxx and wm8xxx patchset."

Far amount of annoying but largely trivial conflicts.  Many due to
__devinit/exit removal, others due to one or two of the new drivers also
having come in through another tree.

* tag 'mfd-3.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (119 commits)
  mfd: tps6507x: Convert to devm_kzalloc
  mfd: stmpe: Update DT support for stmpe driver
  mfd: wm5102: Add readback of DSP status 3 register
  mfd: arizona: Log if we fail to create the primary IRQ domain
  mfd: tps80031: MFD_TPS80031 needs to select REGMAP_IRQ
  mfd: tps80031: Add terminating entry for tps80031_id_table
  mfd: sta2x11: Fix potential NULL pointer dereference in __sta2x11_mfd_mask()
  mfd: wm5102: Add tuning for revision B
  mfd: arizona: Defer patch initialistation until after first device boot
  mfd: tps65910: Fix wrong ack_base register
  mfd: tps65910: Remove unused data
  mfd: stmpe: Get rid of irq_invert_polarity
  mfd: ab8500-core: Fix invalid free of devm_ allocated data
  mfd: wm5102: Mark DSP memory regions as volatile
  mfd: wm5102: Correct default for LDO1_CONTROL_2
  mfd: arizona: Register haptics devices
  mfd: wm8994: Make current device behaviour the default
  mfd: tps65090: MFD_TPS65090 needs to select REGMAP_IRQ
  mfd: Fix stmpe.c build when OF is not enabled
  mfd: jz4740-adc: Use devm_kzalloc
  ...

Pull m68knommu updates from Greg Ungerer:
 "This one has a major restructuring of the non-mmu 68000 support.

  It merges all the related SoC types that use the original 68000 cpu
  core internally so they can share the same core code.  It also allows
  for supporting the original stand alone 68000 cpu in its own right.

  There is also a generalization of the clock support of the ColdFire
  parts, some merging of common ColdFire code, and a couple of bug fixes
  as well."

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: modify clock code so it can be used by all ColdFire CPU types
  m68knommu: add clock definitions for 54xx ColdFire CPU types
  m68knommu: add clock definitions for 5407 ColdFire CPU types
  m68knommu: add clock definitions for 5307 ColdFire CPU types
  m68knommu: add clock definitions for 528x ColdFire CPU types
  m68knommu: add clock definitions for 527x ColdFire CPU types
  m68knommu: add clock definitions for 5272 ColdFire CPU types
  m68knommu: add clock definitions for 525x ColdFire CPU types
  m68knommu: add clock definitions for 5249 ColdFire CPU types
  m68knommu: add clock definitions for 523x ColdFire CPU types
  m68knommu: add clock definitions for 5206 ColdFire CPU types
  m68knommu: add clock creation support macro for other ColdFire CPUs
  m68k: fix unused variable warning in mempcy.c
  m68knommu: make non-MMU page_to_virt() return a void *
  m68knommu: merge ColdFire 5249 and 525x definitions
  m68knommu: disable MC68000 cpu target when MMU is selected
  m68knommu: allow for configuration of true 68000 based systems
  m68knommu: platform code merge for 68000 core cpus

Pull i2c update from Jean Delvare:
 "This is my last pull request for the i2c subsystem.  It includes all
  the patches I collected between kernel v3.7-rc1 and me passing i2c
  maintenance duties over to Wolfram.

  Future patches to the many i2c bus drivers I still maintain will go
  through Wolfram's tree."

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: Mention functionality flags in SMBus protocol documentation
  i2c-piix4: Convert dev_printk(KERN_<LEVEL> to dev_<level>(
  i2c-i801: Enable interrupts for all post-ICH5 chips
  i2c-i801: Add device tree support
  MAINTAINERS: Fix drivers/i2c/busses/i2c-stub.c

Merge tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb

Pull swiotlb update from Konrad Rzeszutek Wilk:
 "Feature:
   - Use dma addresses instead of the virt_to_phys and vice versa
     functions.

  Remove the multitude of phys_to_virt/virt_to_phys calls and instead
  operate on the physical addresses instead of virtual in many of the
  internal functions.  This does provide a speed up in interrupt
  handlers that do DMA operations and use SWIOTLB."

* tag 'stable/for-linus-3.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
  swiotlb: Do not export swiotlb_bounce since there are no external consumers
  swiotlb: Use physical addresses instead of virtual in swiotlb_tbl_sync_single
  swiotlb: Use physical addresses for swiotlb_tbl_unmap_single
  swiotlb: Return physical addresses when calling swiotlb_tbl_map_single
  swiotlb: Make io_tlb_overflow_buffer a physical address
  swiotlb: Make io_tlb_start a physical address instead of a virtual one
  swiotlb: Make io_tlb_end a physical address instead of a virtual one

Pull ext4 update from Ted Ts'o:
 "There are two major features for this merge window.  The first is
  inline data, which allows small files or directories to be stored in
  the in-inode extended attribute area.  (This requires that the file
  system use inodes which are at least 256 bytes or larger; 128 byte
  inodes do not have any room for in-inode xattrs.)

  The second new feature is SEEK_HOLE/SEEK_DATA support.  This is
  enabled by the extent status tree patches, and this infrastructure
  will be used to further optimize ext4 in the future.

  Beyond that, we have the usual collection of code cleanups and bug
  fixes."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (63 commits)
  ext4: zero out inline data using memset() instead of empty_zero_page
  ext4: ensure Inode flags consistency are checked at build time
  ext4: Remove CONFIG_EXT4_FS_XATTR
  ext4: remove unused variable from ext4_ext_in_cache()
  ext4: remove redundant initialization in ext4_fill_super()
  ext4: remove redundant code in ext4_alloc_inode()
  ext4: use sync_inode_metadata() when syncing inode metadata
  ext4: enable ext4 inline support
  ext4: let fallocate handle inline data correctly
  ext4: let ext4_truncate handle inline data correctly
  ext4: evict inline data out if we need to strore xattr in inode
  ext4: let fiemap work with inline data
  ext4: let ext4_rename handle inline dir
  ext4: let empty_dir handle inline dir
  ext4: let ext4_delete_entry() handle inline data
  ext4: make ext4_delete_entry generic
  ext4: let ext4_find_entry handle inline data
  ext4: create a new function search_dir
  ext4: let ext4_readdir handle inline data
  ext4: let add_dir_entry handle inline data properly
  ...

Pull security subsystem updates from James Morris:
 "A quiet cycle for the security subsystem with just a few maintenance
  updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: create a sysfs mount point for smackfs
  Smack: use select not depends in Kconfig
  Yama: remove locking from delete path
  Yama: add RCU to drop read locking
  drivers/char/tpm: remove tasklet and cleanup
  KEYS: Use keyring_alloc() to create special keyrings
  KEYS: Reduce initial permissions on keys
  KEYS: Make the session and process keyrings per-thread
  seccomp: Make syscall skipping and nr changes more consistent
  key: Fix resource leak
  keys: Fix unreachable code
  KEYS: Add payload preparsing opportunity prior to key instantiate or update

These devices are not available on other architectures, so
let's limit them to omap.

If the driver subsystem maintainers want to build test
system wide changes without building for each target,
it's easy to carry a test patch that just strips out the
depends entries from Kconfig files.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull Automatic NUMA Balancing bare-bones from Mel Gorman:
 "There are three implementations for NUMA balancing, this tree
  (balancenuma), numacore which has been developed in tip/master and
  autonuma which is in aa.git.

  In almost all respects balancenuma is the dumbest of the three because
  its main impact is on the VM side with no attempt to be smart about
  scheduling.  In the interest of getting the ball rolling, it would be
  desirable to see this much merged for 3.8 with the view to building
  scheduler smarts on top and adapting the VM where required for 3.9.

  The most recent set of comparisons available from different people are

    mel:    https://lkml.org/lkml/2012/12/9/108
    mingo:  https://lkml.org/lkml/2012/12/7/331
    tglx:   https://lkml.org/lkml/2012/12/10/437
    srikar: https://lkml.org/lkml/2012/12/10/397

  The results are a mixed bag.  In my own tests, balancenuma does
  reasonably well.  It's dumb as rocks and does not regress against
  mainline.  On the other hand, Ingo's tests shows that balancenuma is
  incapable of converging for this workloads driven by perf which is bad
  but is potentially explained by the lack of scheduler smarts.  Thomas'
  results show balancenuma improves on mainline but falls far short of
  numacore or autonuma.  Srikar's results indicate we all suffer on a
  large machine with imbalanced node sizes.

  My own testing showed that recent numacore results have improved
  dramatically, particularly in the last week but not universally.
  We've butted heads heavily on system CPU usage and high levels of
  migration even when it shows that overall performance is better.
  There are also cases where it regresses.  Of interest is that for
  specjbb in some configurations it will regress for lower numbers of
  warehouses and show gains for higher numbers which is not reported by
  the tool by default and sometimes missed in treports.  Recently I
  reported for numacore that the JVM was crashing with
  NullPointerExceptions but currently it's unclear what the source of
  this problem is.  Initially I thought it was in how numacore batch
  handles PTEs but I'm no longer think this is the case.  It's possible
  numacore is just able to trigger it due to higher rates of migration.

  These reports were quite late in the cycle so I/we would like to start
  with this tree as it contains much of the code we can agree on and has
  not changed significantly over the last 2-3 weeks."

* tag 'balancenuma-v11' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux-balancenuma: (50 commits)
  mm/rmap, migration: Make rmap_walk_anon() and try_to_unmap_anon() more scalable
  mm/rmap: Convert the struct anon_vma::mutex to an rwsem
  mm: migrate: Account a transhuge page properly when rate limiting
  mm: numa: Account for failed allocations and isolations as migration failures
  mm: numa: Add THP migration for the NUMA working set scanning fault case build fix
  mm: numa: Add THP migration for the NUMA working set scanning fault case.
  mm: sched: numa: Delay PTE scanning until a task is scheduled on a new node
  mm: sched: numa: Control enabling and disabling of NUMA balancing if !SCHED_DEBUG
  mm: sched: numa: Control enabling and disabling of NUMA balancing
  mm: sched: Adapt the scanning rate if a NUMA hinting fault does not migrate
  mm: numa: Use a two-stage filter to restrict pages being migrated for unlikely task<->node relationships
  mm: numa: migrate: Set last_nid on newly allocated page
  mm: numa: split_huge_page: Transfer last_nid on tail page
  mm: numa: Introduce last_nid to the page frame
  sched: numa: Slowly increase the scanning period as NUMA faults are handled
  mm: numa: Rate limit setting of pte_numa if node is saturated
  mm: numa: Rate limit the amount of memory that is migrated between nodes
  mm: numa: Structures for Migrate On Fault per NUMA migration rate limiting
  mm: numa: Migrate pages handled during a pmd_numa hinting fault
  mm: numa: Migrate on reference policy
  ...

While the mapping between I2C adapter functionality flags and
i2c_smbus_*() helper functions is rather obvious, let's still document
it for clarity.

Also drop the reference to 2 command byte I2C block reads, there is no
support for that in the kernel at the moment.
Signed-off-by: Jean Delvare <khali@linux-fr.org>

dev_<level> calls take less code than dev_printk(KERN_<LEVEL>
and reducing object size is good.
Coalesce formats for easier grep.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I did not receive a single bug report after interrupt support was
added for a limited number of chips. So I'd say the code is good and
should be enabled for all supported chips, that is: ICH5 and later.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>

Add support for probing slave devices parsed from the device tree.
Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This file was moved to drivers/i2c/i2c-stub.c by commit 31d178bf
(i2c-stub: Move to drivers/i2c).

Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Daniel writes:
A few leftover fixes for 3.8:
- VIC support for hdmi infoframes with the associated drm helper, fixes
  some black TVs (Paulo Zanoni)
- Modeset state check (and fixup if the BIOS messed with the hw) for
  lid-open. modeset-rework fallout. Somehow the original reporter went
  awol, so this stalled for way too long until we've found a new
  victim^Wreporter with broken BIOS.
- seqno wrap fixes from Mika and Chris.
- Some minor fixes all over from various people.
- Another race fix in the pageflip vs. unpin code from Chris.
- hsw vga resume support and a few more fdi link fixes (only used for vga
  on hsw) from Paulo.
- Regression fix for DMAR from Zhenyu Wang - I've scavenged memory from my
  DMAR for a while and it broke right away :(
- Regression fix from Takashi Iwai for ivb lvds - some w/a needs to be
  (partially) moved back into place. Note that these are regressions in
  -next.
- One more fix for ivb 3 pipe support - it now actually seems to work.

* 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: (25 commits)
  drm/i915: Fix missed needs_dmar setting
  drm/i915: Fix shifted screen on top of LVDS on IVY laptop
  drm/i915: disable cpt phase pointer fdi rx workaround
  drm/i915: set the LPT FDI RX polarity reversal bit when needed
  drm/i915: add lpt_init_pch_refclk
  drm/i915: add support for mPHY destination on intel_sbi_{read, write}
  drm/i915: reject modes the LPT FDI receiver can't handle
  drm/i915: fix hsw_fdi_link_train "retry" code
  drm/i915: Close race between processing unpin task and queueing the flip
  drm/i915: fixup l3 parity sysfs access check
  drm/i915: Clear the existing watermarks for g4x when modifying the cursor sr
  drm/i915: do not access BLC_PWM_CTL2 on pre-gen4 hardware
  drm/i915: Don't allow ring tail to reach the same cacheline as head
  drm/i915: Decouple the object from the unbound list before freeing pages
  drm/i915: Set sync_seqno properly after seqno wrap
  drm/i915: Include the last semaphore sync point in the error-state
  drm/i915: Rearrange code to only have a single method for waiting upon the ring
  drm/i915: Simplify flushing activity on the ring
  drm/i915: Preallocate next seqno before touching the ring
  drm/i915: force restore on lid open
  ...

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Inki writes:
"- add dmabuf attach/detach feature
  . This patch would resolve performance deterioration issue
    when v4l2-based driver is using the buffer imported from gem.
- drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
  . With gem allocation, kernel space mapping isn't allocated and
    also physical pages aren't mapped with the kernel space.
    The physical pages are mapped with kernel space though vmap
    function only for console framebuffer.
- add the below two patches I missed.
  drm: exynos: moved exynos drm device registration to drm driver
  drm: exynos: moved exynos drm hdmi device registration to drm driver
- add IPP subsystem framework and its-based device drivers.
  . This patch set includes fimc, rotator and gsc drivers to perform
    image scaling, rotation and color space conversion.
- add runtime pm support to hdmi driver.
- And fixups and cleanups."

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (30 commits)
  drm/exynos: add gsc ipp driver
  drm/exynos: add rotator ipp driver
  drm/exynos: add fimc ipp driver
  drm/exynos: add iommu support for ipp
  drm/exynos: add ipp subsystem
  drm/exynos: support device tree for fimd
  drm/exynos: support extended screen coordinate of fimd
  drm/exynos: fix x, y coordinates for right bottom pixel
  drm/exynos: fix fb offset calculation for plane
  drm/exynos: hdmi: Fix potential NULL pointer dereference error
  drm/exynos: hdmi: Add CONFIG_OF and use of_match_ptr() macro
  drm/exynos: add support for hdmiphy power control for exynos5
  drm/exynos: add runtime pm support for mixer
  drm/exynos: added runtime pm support for hdmi
  drm/exynos: fix allocation and cache mapping type
  drm/exynos: reorder framebuffer init sequence
  drm/exynos/iommu: fix return value check in drm_create_iommu_mapping()
  drm/exynos: remove unused vaddr member
  drm/exynos: use DMA_ATTR_NO_KERNEL_MAPPING attribute
  drm/exynos: add exception codes to exynos_drm_fbdev_create()
  ...

This reverts commit bd52276f ("x86-64/efi: Use EFI to deal with
platform wall clock (again)"), and the two supporting commits:

  da5a108d: "x86/kernel: remove tboot 1:1 page table creation code"

  185034e7: "x86, efi: 1:1 pagetable mapping for virtual EFI calls")

as they all depend semantically on commit 53b87cf0 ("x86, mm:
Include the entire kernel memory map in trampoline_pgd") that got
reverted earlier due to the problems it caused.

This was pointed out by Yinghai Lu, and verified by me on my Macbook Air
that uses EFI.
Pointed-out-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull target updates from Nicholas Bellinger:
 "It has been a very busy development cycle this time around in target
  land, with the highlights including:

   - Kill struct se_subsystem_dev, in favor of direct se_device usage
     (hch)
   - Simplify reservations code by combining SPC-3 + SCSI-2 support for
     virtual backends only (hch)
   - Simplify ALUA code for virtual only backends, and remove left over
     abstractions (hch)
   - Pass sense_reason_t as return value for I/O submission path (hch)
   - Refactor MODE_SENSE emulation to allow for easier addition of new
     mode pages.  (roland)
   - Add emulation of MODE_SELECT (roland)
   - Fix bug in handling of ExpStatSN wrap-around (steve)
   - Fix bug in TMR ABORT_TASK lookup in qla2xxx target (steve)
   - Add WRITE_SAME w/ UNMAP=0 support for IBLOCK backends (nab)
   - Convert ib_srpt to use modern target_submit_cmd caller + drop
     legacy ioctx->kref usage (nab)
   - Convert ib_srpt to use modern target_submit_tmr caller (nab)
   - Add link_magic for fabric allow_link destination target_items for
     symlinks within target_core_fabric_configfs.c code (nab)
   - Allocate pointers in instead of full structs for
     config_group->default_groups (sebastian)
   - Fix 32-bit highmem breakage for FILEIO (sebastian)

  All told, hch was able to shave off another ~1K LOC by killing the
  se_subsystem_dev abstraction, along with a number of PR + ALUA
  simplifications.  Also, a nice patch by Roland is the refactoring of
  MODE_SENSE handling, along with the addition of initial MODE_SELECT
  emulation support for virtual backends.

  Sebastian found a long-standing issue wrt to allocation of full
  config_group instead of pointers for config_group->default_group[]
  setup in a number of areas, which ends up saving memory with big
  configurations.  He also managed to fix another long-standing BUG wrt
  to broken 32-bit highmem support within the FILEIO backend driver.

  Thank you again to everyone who contributed this round!"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits)
  target/iscsi_target: Add NodeACL tags for initiator group support
  target/tcm_fc: fix the lockdep warning due to inconsistent lock state
  sbp-target: fix error path in sbp_make_tpg()
  sbp-target: use simple assignment in tgt_agent_rw_agent_state()
  iscsi-target: use kstrdup() for iscsi_param
  target/file: merge fd_do_readv() and fd_do_writev()
  target/file: Fix 32-bit highmem breakage for SGL -> iovec mapping
  target: Add link_magic for fabric allow_link destination target_items
  ib_srpt: Convert TMR path to target_submit_tmr
  ib_srpt: Convert I/O path to target_submit_cmd + drop legacy ioctx->kref
  target: Make spc_get_write_same_sectors return sector_t
  target/configfs: use kmalloc() instead of kzalloc() for default groups
  target/configfs: allocate only 6 slots for dev_cg->default_groups
  target/configfs: allocate pointers instead of full struct for default_groups
  target: update error handling for sbc_setup_write_same()
  iscsit: use GFP_ATOMIC under spin lock
  iscsi_target: Remove redundant null check before kfree
  target/iblock: Forward declare bio helpers
  target: Clean up flow in transport_check_aborted_status()
  target: Clean up logic in transport_put_cmd()
  ...

Fix regression, and some locking races, also as CS support
for the DMA engines.

* 'drm-next-3.8' of git://people.freedesktop.org/~agd5f/linux:
  radeon: fix regression with eviction since evict caching changes
  drm/radeon: add more pedantic checks in the CP DMA checker
  drm/radeon: bump version for CS ioctl support for async DMA
  drm/radeon: enable the async DMA rings in the CS ioctl
  drm/radeon: add VM CS parser support for async DMA on cayman/TN/SI
  drm/radeon/kms: add evergreen/cayman CS parser for async DMA (v2)
  drm/radeon/kms: add 6xx/7xx CS parser for async DMA (v2)
  drm/radeon: fix htile buffer size computation for command stream checker
  drm/radeon: fix fence locking in the pageflip callback
  drm/radeon: make indirect register access concurrency-safe
  drm/radeon: add W|RREG32_IDX for MM_INDEX|DATA based mmio accesss

Pull EXTCON patches from Greg Kroah-Hartman:
 "Here are some drivers/extcon/ patches that I forgot to have you pull
  in the larger char/misc patchset from yesterday, for the 3.8-rc1
  kernel.

  Nothing major here, just some driver updates, and cleanups, all of
  which have been in linux-next for a while now.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'char-misc-3.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  extcon: kernel_doc style fix
  extcon: max77693: Fix uninitialised variable warning
  extcon: max77693: Use devm_kzalloc
  extcon: max8997: Use devm_kzalloc
  extcon: max8997: Fix a typo
  extcon: max8997: Fix checkpatch error
  extcon: max77693: Fix coding style
  extcon: max77693: Fix incorrect error check and return value
  extcon: max8997: Fix incorrect error check and return value
  extcon: Fix return value in extcon-class.c
  extcon: Add missing header file to extcon.h
  extcon: arizona: unlock mutex on error path in arizona_micdet()

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c

Pull LED subsystem update from Bryan Wu.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (47 commits)
  leds: leds-lp5521: return an error code on error in probe()
  leds: leds-clevo-mail: Use pr_* instead of printks
  leds: leds-rb532: Fix checkpatch errors
  leds: led-triggers: Fix checkpatch warnings
  leds: ledtrig-backlight: Fix checkpatch error
  leds: leds-wrap: Use <linux/io.h> instead of <asm/io.h>
  leds: leds-wm8350: Use dev_err instead of printk
  leds: leds-pwm: Fix checkpatch warning
  leds: leds-pca955x: Use dev_info instead of printk
  leds: leds-net48xx: Use linux/io.h instead of asm/io.h
  leds: leds-lt3593: Fix checkpatch warnings
  leds: leds-gpio: Use dev_info instead of printk
  leds: leds-da903x: Fix checkpatch error and warnings
  leds: leds-bd2802: Fix checkpatch warnings
  leds: leds-adp5520: Fix checkpatch warnings
  leds: led-class: Fix checkpatch warning
  leds: leds-ns2: use devm_gpio_request_one
  leds: leds-lt3593: use devm_gpio_request_one
  leds: leds-gpio: use devm_gpio_request_one
  leds: lp3944: Fix return value
  ...

Pull pstore update from Anton Vorontsov:
 "Here are just a few fixups for the pstore subsystem, nothing special
  this time"

* tag 'for-v3.8' of git://git.infradead.org/users/cbou/linux-pstore:
  pstore/ftrace: Adjust for ftrace_ops->func prototype change
  pstore/ram: Fix bounds checks for mem_size, record_size, console_size and ftrace_size
  pstore/ram: Fix undefined usage of rounddown_pow_of_two(0)
  pstore/ram: Fixup section annotations

Pull libata updates from Jeff Garzik:

 - More ACPI fixes

 - ata_piix: cosmetic code movement, re-enable MS Virtual PC support

 - generic platform driver improvements; use common code

 - pata_cs5536: add quirk for broken udma

 - printk prettiness (dev_printk becomes dev_info, etc.)

 - sata_promise: fix hardreset lockdep error

 - minor cleanups from Sergei Shtylyov

 - minor, automated cleanups from Wei Yongjun

 - fix null ptr deref bug, in sysfs API

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (37 commits)
  sata_dwc_460ex: remove file exec bit (chmod 0755 -> 0644)
  [libata] fix Null pointer dereference on disk error
  ahci: convert ata_link_printk() to ata_link_warn()
  pata_imx: convert ata_dev_printk() to ata_dev_info()
  ARM: ep93xx: convert ata_<foo>_printk() to ata_<foo>_<level>()
  ahci_platform: make structs static
  Revert "pata_octeon_cf: perform host detach, removal on exit"
  Revert "libata: check SATA_SETTINGS log with HW Feature Ctrl"
  pata_of_platform: fix compile error
  libata: use pci_get_drvdata() helper
  pata_octeon_cf: perform host detach, removal on exit
  sata_highbank: utilize common ata_platform_remove_one()
  pata_palmld: utilize common ata_platform_remove_one()
  pata_platform: remove unused remove function
  pata_platform: utilize common ata_platform_remove_one()
  pata_of_platform: utilize common ata_platform_remove_one()
  pata_mpc52xx: utilize common ata_platform_remove_one()
  pata_ixp4xx_cf: utilize common ata_platform_remove_one()
  ahci_platform: utilize common ata_platform_remove_one()
  libata: implement ata_platform_remove_one()
  ...

Pull microblaze update from Michal Simek:
 "The main change is UAPI for Microblaze."

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: signal: Declare do_notify_resume
  microblaze: lib: Add lib function declarations
  microblaze: lib: Remove helper macros
  microblaze: Add static qualifiers
  microblaze: Wire-up new system call kcmp
  microblaze: Fix intc_enable_or_unmask function
  microblaze: Do not initialized regs->r1 twice in ELF_PLAT_INIT
  microblaze: Remove passing the second arg to schedule_tail
  UAPI: (Scripted) Disintegrate arch/microblaze/include/asm
  microblaze: uaccess.h: Fix timerfd syscall
  microblaze: Remove BIP from childregs