- 11 Apr, 2013 11 commits
-
-
Ming Lei authored
Use usbnet_link_change to handle link change centrally. Cc: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
Ming Lei <ming.lei@canonical.com> Acked-by:
Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ming Lei authored
Use usbnet_link_change to handle link change centrally. Signed-off-by:
-
Ming Lei authored
Use usbnet_link_change to handle link change centrally. Signed-off-by:
-
Ming Lei authored
Use usbnet_link_change to handle link change centrally. Signed-off-by:
-
Ming Lei authored
Use the introduced usbnet_link_change to handle link change. Signed-off-by:
-
Ming Lei authored
This patch uses the introduced usbnet_link_change() to handle link change. Signed-off-by:
-
Ming Lei authored
The driver doesn't implement link_reset() callback, so it needn't to send link reset event. Signed-off-by:
-
Ming Lei authored
This patch introduces the API of usbnet_link_change, so that usbnet can handle link change centrally, which may help to implement killing traffic URBs for saving USB bus bandwidth and host controller power. Signed-off-by:
-
stephen hemminger authored
Minor sparse warning Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
stephen hemminger authored
Fix warning about 0 used as NULL. Signed-off-by:
-
stephen hemminger authored
Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
- 10 Apr, 2013 3 commits
-
-
David S. Miller authored
John W. Linville says: ==================== Please accept this pull request for the 3.10 stream... Regarding the mac80211 bits, Johannes says: "Here I have a bunch of minstrel fixes from Felix, per-interface multicast filtering from Alex, set_tim debouncing from Ilan, per-interface debugfs cleanups from Stanislaw, an error return fix from Wei and a number of small improvements and fixes that I made myself." And for the iwlwifi bits, Johannes says: "Andrei changed an instance of kmalloc+memdup to kmemdup, Stanislaw removed the now unused 5ghz_disable module parameter. I also have a number of fixes from Ilan, Emmanuel and myself, Emmanuel also continued working on Bluetooth coexistence." For the sizeable batch of Bluetooth bits, Gustavo says: "This is our first batch of patches for 3.10. The biggest changes of this pull request are from Johan Hedberg, he implemented a HCI request framework to make life easier when we have to send many HCI commands and a block and wait for all of the to finish, we were able to fix a few issues in stack with the introduction of this framework. Other than that Dean Jenkins did a good work cleaning the RFCOMM code, the refcnt infrastructure was removed and now we use NULL pointer checks to know when a object was freed or not. That code was buggy and now it looks a way better. The rest of changes are clean ups, fixes and small improvements all over the Bluetooth subsystem." Regarding the wl12xx bits, Luca says: "Some patches intended for 3.10. Mostly bug fixes and other small improvements." On top of that, there are updates to brcmfmac, brcmsmac, b43, ssb and bcma, as well as mwifiex, rt2x00, and ath9k and a few others. The most notable bit is the addition of a new driver in the rtlwifi family. Please let me know if there are problems! ==================== Signed-off-by: -
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c net/mac80211/sta_info.c net/wireless/core.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/rt2x00/rt2x00pci.c
-
- 09 Apr, 2013 21 commits
-
-
Joe Perches authored
Using bool can make code more readable. Convert uses and tests of int to bool. This also makes a comparison of tg3->link_up (itself bool) a bool comparison instead of int. Reorder stack variable declarations to make bool fit declaration holes where appropriate. $ size drivers/net/ethernet/broadcom/tg3.o* text data bss dec hex filename 169958 27249 58896 256103 3e867 drivers/net/ethernet/broadcom/tg3.o.new 169968 27249 58896 256113 3e871 drivers/net/ethernet/broadcom/tg3.o.old Signed-off-by:
Joe Perches <joe@perches.com> Reviewed-by:
-
David S. Miller authored
Nithin Nayak Sujir says: ==================== This patch and the following two patches add support for link flap avoidance by maintaining the link on power down. This feature is required for management capable devices to have the management connection uninterrupted on driver reload, reboot and interface up/down. The other pros of this feature are - It speeds up boot up time by several seconds as DHCP addresses can be acquired faster. - It avoids lengthy Spanning Tree delay. On powerup the hardware brings up the phy with default settings. If the link is not up, the management software configures the phy to gigabit and starts autonegotiate. Subsequently, as long as the link is up, the driver and management refrain from resetting and/or changing any configuration that the link depends on. The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is disabled by default. If this setting is enabled, we skip powering down the phy and resetting it. A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds support for gigabit link speed when device is on auxiliary power. ==================== Signed-off-by:
Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by:
-
Nithin Sujir authored
Signed-off-by:
-
Nithin Sujir authored
Signed-off-by:
-
Nithin Sujir authored
When LFA is enabled, we don't reset the phy. But EEE settings changes don't take effect until the phy is reset. Add a phy reset when we detect a changed EEE setting. Signed-off-by:
-
Nithin Sujir authored
Normally on driver load, we set the default settings for speed and flow control. However, if the default setting is not compatible with the current link state, we would autonegotiate and cause a link flap. To avoid this, we pull the current advertised settings into the config. A second scenario is if a user changes the speed/duplex/fc settings when the interface is down. In this case we must not pull the settings from the phy and overwrite user settings. We avoid that by checking the USER_CONFIGURED flag. Signed-off-by:
-
Nithin Sujir authored
This patch and the following two patches add support for link flap avoidance by maintaining the link on power down. This feature is required for management capable devices to have the management connection uninterrupted on driver reload, reboot and interface up/down. The other pros of this feature are - It speeds up boot up time by several seconds as DHCP addresses can be acquired faster. - It avoids lengthy Spanning Tree delay. On powerup the hardware brings up the phy with default settings. If the link is not up, the management software configures the phy to gigabit and starts autonegotiate. Subsequently, as long as the link is up, the driver and management refrain from resetting and/or changing any configuration that the link depends on. The LNK_FLAP_AVOID setting is an NVRAM user configurable bit and is disabled by default. If this setting is enabled, we skip powering down the phy and resetting it. A second NVRAM setting is 1G_ON_VAUX_OK (off by default). This adds support for gigabit link speed when device is on auxiliary power. Signed-off-by:
-
Michael Chan authored
Signed-off-by:
-
Michael Chan authored
Refactor for use in the next patch that adds sgmii phy support. Signed-off-by:
-
Nithin Sujir authored
When the user executes certain ethtool commands such as -s, -A, -G, -L, -r a phy reset or autonegotiate is performed which results in management traffic being interrupted. Add a warning in these cases. Signed-off-by:
-
Nithin Sujir authored
The current code unnecessarily resets the phy when we use ethtool to change the ring parameters or flow control settings. Remove the phy reset. Signed-off-by:
-
Michael Chan authored
The STM45PE20 pinstrap on 5762 devices supports multiple sizes. So treat it just like the ST45_USPT and the size will be read from 0xf0 via tg3_get_nvram_size(). Signed-off-by:
-
Nithin Sujir authored
In tg3_setup_copper_phy(), if autonegotiation is disabled, we need to relink only if the speed or duplex does not match the configured setting. If flow control does not match, a relink is not necessary as flow control is not a PHY setting. Later on, we'll call tg3_setup_flow_ctrl() to set up the MAC to the desired flow control settings if we're in full duplex mode. Signed-off-by:
-
Daniel Borkmann authored
This patch introduces an UAPI header for the SCTP protocol, so that we can facilitate the maintenance and development of user land applications or libraries, in particular in terms of header synchronization. To not break compatibility, some fragments from lksctp-tools' netinet/sctp.h have been carefully included, while taking care that neither kernel nor user land breaks, so both compile fine with this change (for lksctp-tools I tested with the old netinet/sctp.h header and with a newly adapted one that includes the uapi sctp header). lksctp-tools smoke test run through successfully as well in both cases. Suggested-by:
Neil Horman <nhorman@tuxdriver.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Wei Yongjun authored
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Zefan Li authored
The callers always pass current to sock_update_netprio(). Signed-off-by:
Li Zefan <lizefan@huawei.com> Acked-by:
-
Zefan Li authored
The callers always pass current to sock_update_classid(). Signed-off-by:
-
Zefan Li authored
We read the value but make no use of it. Signed-off-by:
-
Daniel Borkmann authored
Instead of invalidating all IPv6 addresses with global scope when one decides to use IPv6 tokens, we should only invalidate previous tokens and leave the rest intact until they expire eventually (or are intact forever). For doing this less greedy approach, we're adding a bool at the end of inet6_ifaddr structure instead, for two reasons: i) per-inet6_ifaddr flag space is already used up, making it wider might not be a good idea, since ii) also we do not necessarily need to export this information into user space. Suggested-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Daniel Borkmann authored
When we set the iftoken in inet6_set_iftoken(), we return -EINVAL when the device does not have flag IF_READY. This is however not necessary and rather an artificial usability barrier, since we simply can set the token despite that, and in case the device is ready, we just send out our rs, otherwise ifup et al. will do this for us anyway. Suggested-by:
-
Daniel Borkmann authored
Since we check for !ipv6_addr_any(&in6_dev->token) in addrconf_prefix_rcv(), make the token initialization on device setup more intuitive by using in6addr_any as an initializer. Suggested-by:
-
- 08 Apr, 2013 5 commits
-
-
Bjørn Mork authored
Receiving unhandled notifications is most certainly not an error and should not be logged as one. Knowing that the device sends notifications we don't handle is useful for developers, but there is very little a user can do about this. The message is therefore just annoying noise to most users with devices sending unhandled notifications like e.g. USB_CDC_NOTIFY_RESPONSE_AVAILABLE Cc: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Rami Rosen authored
This patch adds a new file, Documentation/cgroups/net_cls.txt, with info about net_cls cgroups, and updates the 00-INDEX accordingly. Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
This patch adds support for IPv6 tokenized IIDs, that allow for administrators to assign well-known host-part addresses to nodes whilst still obtaining global network prefix from Router Advertisements. It is currently in draft status. The primary target for such support is server platforms where addresses are usually manually configured, rather than using DHCPv6 or SLAAC. By using tokenised identifiers, hosts can still determine their network prefix by use of SLAAC, but more readily be automatically renumbered should their network prefix change. [...] The disadvantage with static addresses is that they are likely to require manual editing should the network prefix in use change. If instead there were a method to only manually configure the static identifier part of the IPv6 address, then the address could be automatically updated when a new prefix was introduced, as described in [RFC4192] for example. In such cases a DNS server might be configured with such a tokenised interface identifier of ::53, and SLAAC would use the token in constructing the interface address, using the advertised prefix. [...] http://tools.ietf.org/html/draft-chown-6man-tokenised-ipv6-identifiers-02 The implementation is partially based on top of Mark K. Thompson's proof of concept. However, it uses the Netlink interface for configuration resp. data retrival, so that it can be easily extended in future. Successfully tested by myself. Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
Giuseppe CAVALLARO authored
This patch is to prefetch, in the stmmac_rx, the whole dma_erx descriptor in case of using the extended descriptors. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
recently many new supports have been added in the stmmac driver w/o taking care about where each new field had to be placed inside the private structure for guaranteeing the best cache usage. This is what I wanted in the beginning, so this patch reorganizes all the fields in order to keep adjacent fields for cache effect. I have also tried to optimize them by using pahole. V2: do not abuse with ____cacheline_aligned_in_smp and keep fields that potentially could stay in the same cache-line for better usage in SMP systems. Signed-off-by:
-
