- 11 Jul, 2022 34 commits
-
-
Deren Wu authored
Beacon disable flow would be handled in bss stop handler automatically. Force return -EOPNOTSUPP in disable case. Fixes: 116c6960 ("mt76: mt7921: Add AP mode support") Reviewed-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Deren Wu <deren.wu@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Lorenzo Bianconi authored
Move mt76_connac2_mac_add_txs_skb in mt76-connac module since it is shared between connac2 devices (mt7921 and mt7915) Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
mac_write_txwi code is shared between connac2 devices (mt7915 and mt7921). Move it in connac module. Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to share connac2 mac txwi code. Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to share txwi configuration code. Signed-off-by:
-
Lorenzo Bianconi authored
This is a preliminary patch to share txwi configuration code. Signed-off-by:
-
Deren Wu authored
According IEEE Std 802.11-2020, its definition is: Indicates whether the STA is capable of interpreting the Extended NSS BW Support subfield of the VHT Capabilities Information field. Some APs, such as Xiaomi AX6000, would check this one for BW settings. mt76 driver can get max BW capability only if the this field is confgured properly. Reviewed-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Remove duplicated code Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_connac2_load_patch utility routine in mt76_connac module since it is shared between mt7921 and mt7915. This is a preliminary patch to support mt7902e driver. Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_connac2_load_ram utility routine in mt76_connac module since it is shared between mt7921 and mt7915. This is a preliminary patch to support mt7902e driver. Signed-off-by:
-
Lorenzo Bianconi authored
Move drv_own/fw_own toggle in mt7921_load_firmware. This change allow to reuse connac code to load patch for mt7921 driver. Signed-off-by:
-
Lorenzo Bianconi authored
Move mt76_connac2 fw structures in connac module since they are shared between mt7921 and mt7915 drivers. This is a preliminary patch to add mt7902e support. Signed-off-by:
-
Lorenzo Bianconi authored
Run skb_queue_purge when needed. Signed-off-by:
-
Lorenzo Bianconi authored
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by:
-
Felix Fietkau authored
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: -
Felix Fietkau authored
napi_schedule() can call __raise_softirq_irqoff(), which can perform softirq handling, so it must not be called in a pure process context with BH enabled. Signed-off-by: -
Peter Chiu authored
Add clocks and clock-names for MT7986. Reviewed-by:
Peter Chiu <chui-hao.chiu@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
YN Chen authored
To avoid racing problems in chip, mt7921s should reacquire drv-own after firmware semaphore is released. Fixes: 78b21758 ("mt76: mt7921s: fix bus hang with wrong privilege") Signed-off-by:
YN Chen <yn.chen@mediatek.com> Signed-off-by:
-
YN Chen authored
add new case to fetch the return value of PATCH_FINISH_REQ Signed-off-by:
-
Ryder Lee authored
Enable/disable rx napi for DBDC. Signed-off-by:
Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by:
-
Ryder Lee authored
Add channel time and MAC ready stats. Signed-off-by:
-
Deren Wu authored
Add new function mt7921_set_tx_sar_pwr() to update SAR power from .set_sar_specs and ACPI setting. Both settings would be merged into mt76_freq_range_power for final tx power value. Reviewed-by:
-
Deren Wu authored
In ACPI SAR enabled device, mt7921 should read power limit in ACPI config. The limit value would be applied to regular tx power settings in mt76. Two major functionalities added: 1. Get SAR power table through ACPI. 2. Read power in Dynamic/Geo SAR table for tx power limit. Table note MTDS: Dynamic SAR table MTGS: Geo SAR table MTCL: Country List table (for 6GHz support) Reviewed-by:
Quan Zhou <quan.zhou@mediatek.com> Signed-off-by:
-
Deren Wu authored
Add new frequencies support in mt76_sar_freq_ranges[] * 5945 - 6165 * 6165 - 6405 * 6405 - 6525 * 6525 - 6705 * 6705 - 6865 * 6865 - 7125 Reviewed-by:
-
Dan Carpenter authored
This code is supposed to set a u32 value, but casting will not work on big endian systems. Fixes: 0a17329a ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lorenzo Bianconi authored
Free the skb if mt76u_bulk_msg fails in __mt76x02u_mcu_send_msg routine. Fixes: 4c89ff2c ("mt76: split __mt76u_mcu_send_msg and mt76u_mcu_send_msg routines") Co-developed-by:
Gergo Koteles <soyer@irl.hu> Signed-off-by:
-
Lorenzo Bianconi authored
Fix the following sparse warning in mt7915_rf_regval_get routine: drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c:979:16: warning: cast to restricted __le32 Fixes: 0a17329a ("mt76: mt7915: add debugfs knob for RF registers read/write") Signed-off-by:
-
Johannes Berg authored
The robots report that we're now casting to a differently sized integer, which is correct, and the previous patch had erroneously removed it. Reported-by:
kernel test robot <lkp@intel.com> Fixes: 4ee186fa ("wifi: mac80211_hwsim: fix race condition in pending packet") Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Jeongik Cha authored
A pending packet uses a cookie as an unique key, but it can be duplicated because it didn't use atomic operators. And also, a pending packet can be null in hwsim_tx_info_frame_received_nl due to race condition with mac80211_hwsim_stop. For this, * Use an atomic type and operator for a cookie * Add a lock around the loop for pending packets Signed-off-by:
Jeongik Cha <jeongik@google.com> Link: https://lore.kernel.org/r/20220704084354.3556326-1-jeongik@google.comSigned-off-by:
-
Christophe JAILLET authored
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them. It is less verbose and it improves the semantic. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/dfb438a6a199ee4c95081fa01bd758fd30e50931.1656962156.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
MeiChia Chiu authored
When mac80211 downgrades working bandwidth, the center_freq and center_freq1 need to be recalculated. There is a typo in the case of downgrading bandwidth from 320MHz to 160MHz which would cause a wrong frequency value. Reviewed-by:
Money Wang <Money.Wang@mediatek.com> Signed-off-by:
MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220708095823.12959-1-MeiChia.Chiu@mediatek.comSigned-off-by:
-
Veerendranath Jakkam authored
commit dd374f84 ("wifi: nl80211: expose link ID for associated BSSes") used a top-level attribute to send link ID of the associated BSS in the nested attribute NL80211_ATTR_BSS. But since NL80211_ATTR_BSS is a nested attribute of the attributes defined in enum nl80211_bss, define a new attribute in enum nl80211_bss and use it for sending the link ID of the BSS. Fixes: dd374f84 ("wifi: nl80211: expose link ID for associated BSSes") Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://lore.kernel.org/r/20220708122607.1836958-1-quic_vjakkam@quicinc.comSigned-off-by:
-
Veerendranath Jakkam authored
A comment in cfg80211_mlme_mgmt_tx() is describing this API used only for transmitting action frames. Fix the comment since cfg80211_mlme_mgmt_tx() can be used to transmit any management frame. Signed-off-by:
-
Veerendranath Jakkam authored
nl80211_pre_doit() using nla_get_u16() to read u8 attribute NL80211_ATTR_MLO_LINK_ID. Fix this by using nla_get_u8() to read NL80211_ATTR_MLO_LINK_ID attribute. Signed-off-by:
-
- 08 Jul, 2022 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.20. Major changes: ath9k * fix use-after-free in ath9k_hif_usb_rx_cb()
-
Jiang Jian authored
there is unexpected word "the" in comments need to remove Signed-off-by:
Jiang Jian <jiangjian@cdjrlc.com> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220621080240.42198-1-jiangjian@cdjrlc.com
-
Zhang Jiaming authored
There is a typo(isn't') in comments. It maybe 'isn't' instead of 'isn't''. Signed-off-by:
Zhang Jiaming <jiaming@nfschina.com> Signed-off-by:
-
- 01 Jul, 2022 3 commits
-
-
Aloka Dixit authored
Add support to retrieve EHT capabilities and EHT operation elements passed by the userspace in the beacon template and store the pointers in struct cfg80211_ap_settings to be used by the drivers. Co-developed-by:
Vikram Kandukuri <quic_vikram@quicinc.com> Signed-off-by:
Aloka Dixit <quic_alokad@quicinc.com> Link: https://lore.kernel.org/r/20220523064904.28523-1-quic_alokad@quicinc.comSigned-off-by:
-
Veerendranath Jakkam authored
Increase akm_suites array size in struct cfg80211_crypto_settings to 10 and advertise the capability to userspace. This allows userspace to send more than two AKMs to driver in netlink commands such as NL80211_CMD_CONNECT. This capability is needed for implementing WPA3-Personal transition mode correctly with any driver that handles roaming internally. Currently, the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256, SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing the akm_suites array size to 10 should be reasonable for future usecases. Signed-off-by:
-
Johannes Berg authored
The current check only worked for AP mode, but we can do radar detection in mesh as well (for example). We could try to check this using wdev_chandef(), but we also don't really care since the chandef is passed in and we have no need to use it anymore (since we added the argument in commit d2859df5 ("cfg80211/mac80211: DFS setup chandef for cac event")). Change-Id: I856e4344d5e64ff4d2eead0b4c53b11f264be9b8 Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
