Set up basic tracepoints for debugging NFSv4 setattr, access,
readlink, readdir, get_acl set_acl get_security_label,
and set_security_label.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Set up basic tracepoints for debugging NFSv4 lookup, unlink/remove,
symlink, mkdir, mknod, fs_locations and secinfo.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Set up basic tracepoints for debugging NFSv4 file lock/unlock
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Set up basic tracepoints for debugging NFSv4 file open/close
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Set up basic tracepoints for debugging client id creation/destruction
and session creation/destruction.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Add tracepoints for mknod, mkdir, rmdir, remove (unlink) and symlink.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Add tracepoints for lookup, lookup_revalidate and atomic_open
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

When doing an open of a directory, ensure that we do pass the lookup flags
from nfs_atomic_open into nfs_lookup.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Add tracepoints for inode attribute updates, attribute revalidation,
writeback start/end fsync start/end, attribute change start/end,
permission check start/end.

The intention is to enable performance tracing using 'perf'as well as
improving debugging.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We want to be able to display the crc32 hash of the filehandle in
tracepoints.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Optimise for the case where we only do one lookup.
Clean up the code so it is obvious that silly[] is not a dynamic array.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

We always encode to __be32 format in XDR: silences a sparse warning.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Andy Adamson <andros@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Bryan Schumaker <bjschuma@netapp.com>

Technically, we don't really need to convert these time stamps,
since they are actually cookies.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <Chuck.Lever@oracle.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Ever since commit 6168f62c (Add ACCESS operation to OPEN compound)
the NFSv4 atomic open has primed the access cache, and so nfs_permission
will no longer do an RPC call on the wire.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

As per RFC 5661 Security Considerations

Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible"
uses the nfs_client cl_rpcclient for all clientid management operations.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

As per RFC 3530 and RFC 5661 Security Considerations

Commit 4edaa308 "NFS: Use "krb5i" to establish NFSv4 state whenever possible"
uses the nfs_client cl_rpcclient for all clientid management operations.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Increase NFS4_DEF_SLOT_TABLE_SIZE which is used as the client ca_maxreequests
value in CREATE_SESSION.  Current non-dynamic session slot server
implementations use the client ca_maxrequests as a maximum slot number: 64
session slots can handle most workloads.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Never try to use a non-UID 0 user credential for lease management,
as that credential can change out from under us.  The server will
block NFSv4 lease recovery with NFS4ERR_CLID_INUSE.

Since the mechanism to acquire a credential for lease management
is now the same for all minor versions, replace the minor version-
specific callout with a single function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Commit 05f4c350 "NFS: Discover NFSv4 server trunking when mounting"
Fri Sep 14 17:24:32 2012 introduced Uniform Client String support,
which forces our NFS client to establish a client ID immediately
during a mount operation rather than waiting until a user wants to
open a file.

Normally machine credentials (eg. from a keytab) are used to perform
a mount operation that is protected by Kerberos.  Before 05fc350,
SETCLIENTID used a machine credential, or fell back to a regular
user's credential if no keytab is available.

On clients that don't have a keytab, performing SETCLIENTID early
means there's no user credential to fall back on, since no regular
user has kinit'd yet.  05f4c350 seems to have broken the ability
to mount with sec=krb5 on clients that don't have a keytab in
kernels 3.7 - 3.10.

To address this regression, commit 4edaa308 (NFS: Use "krb5i" to
establish NFSv4 state whenever possible), Sat Mar 16 15:56:20 2013,
was merged in 3.10.  This commit forces the NFS client to fall back
to AUTH_SYS for lease management operations if no keytab is
available.

Neil Brown noticed that, since root is required to kinit to do a
sec=krb5 mount when a client doesn't have a keytab, we can try to
use root's Kerberos credential before AUTH_SYS.

Now, when determining a principal and flavor to use for lease
management, the NFS client tries in this order:

  1.  Flavor: AUTH_GSS, krb5i
      Principal: service principal (via keytab)

  2.  Flavor: AUTH_GSS, krb5i
      Principal: user principal established for UID 0 (via kinit)

  3.  Flavor: AUTH_SYS
      Principal: UID 0 / GID 0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

RFC3530 disallows the use of udp as a transport protocol for NFSv4.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, you can open a NFSv4 file with O_APPEND|O_DIRECT, but cannot
fcntl(F_SETFL,...) with those flags. This flag combination is explicitly
forbidden on NFSv3 opens, and it seems like it should also be on NFSv4.
Reported-by: Chao Ye <cye@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Commit 6f2ea7f2 (NFS: Add nfs4_unique_id boot parameter) introduces a
boot parameter that allows client administrators to set a string
identifier for use by the EXCHANGE_ID and SETCLIENTID arguments in order
to make them more globally unique.

Unfortunately, that uniquifier is no longer globally unique in the presence
of net namespaces, since each container expects to be able to set up their
own lease when mounting a new NFSv4/4.1 partition.
The fix is to add back in the container-specific hostname in addition to
the unique id.

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Should not use the clientid maintenance rpc_clnt.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Clean up: when NFSv4.1 support is compiled out,
nfs4_end_drain_session() becomes a stub.  Make the synopsis of the
stub match the synopsis of the real version of the function.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Now that Al has fixed simple_lookup to account for the case where
sb->s_d_op is set, there's no need to keep our own special lookup op.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

nfs4_proc_setattr removes ATTR_OPEN from sattr->ia_valid, but later
nfs4_do_setattr checks for it
Signed-off-by: Nadav Shemer <nadav@tonian.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

The attribute length is already calculated in advance. There is no
reason why we cannot calculate the bitmap in advance too so that
we don't have to play pointer games.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Pull alpha architecture fixes from Matt Turner:
 "This contains mostly clean ups and fixes but also an implementation of
  atomic64_dec_if_positive() and a pair of new syscalls"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: Use handle_percpu_irq for the timer interrupt
  alpha: Force the user-visible HZ to a constant 1024.
  alpha: Don't if-out dp264_device_interrupt.
  alpha: Use __builtin_alpha_rpcc
  alpha: Fix type compatibility warning for marvel_map_irq
  alpha: Generate dwarf2 unwind info for various kernel entry points.
  alpha: Implement atomic64_dec_if_positive
  alpha: Improve atomic_add_unless
  alpha: Modernize lib/mpi/longlong.h
  alpha: Add kcmp and finit_module syscalls
  alpha: locks: remove unused arch_*_relax operations
  alpha: kernel: typo issue, using '1' instead of '11'
  alpha: kernel: using memcpy() instead of strcpy()
  alpha: Convert print_symbol to %pSR

Pull vhost fixes from Michael Tsirkin:
 "vhost: more fixes for 3.11

  This includes some fixes for vhost net and scsi drivers.

  The test module has already been reworked to avoid rcu usage, but the
  necessary core changes are missing, we fixed this.

  Unlikely to affect any real-world users, but it's early in the cycle
  so, let's merge them"

(It was earlier when Michael originally sent the email, but it somehot
got missed in the flood, so here it is after -rc2)

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: Remove custom vhost rcu usage
  vhost-scsi: Always access vq->private_data under vq mutex
  vhost-net: Always access vq->private_data under vq mutex

Pull fuse bugfixes from Miklos Szeredi:
 "These are bugfixes and a cleanup to the "readdirplus" feature"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: readdirplus: cleanup
  fuse: readdirplus: change attributes once
  fuse: readdirplus: fix instantiate
  fuse: readdirplus: sanity checks
  fuse: readdirplus: fix dentry leak

The calculation of the attribute length was 4 bytes off.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes and cleanups from Steven Rostedt:
 "This contains fixes, optimizations and some clean ups

  Some of the fixes need to go back to 3.10.  They are minor, and deal
  mostly with incorrect ref counting in accessing event files.

  There was a couple of optimizations that should have perf perform a
  bit better when accessing trace events.

  And some various clean ups.  Some of the clean ups are necessary to
  help in a fix to a theoretical race between opening a event file and
  deleting that event"

* tag 'trace-3.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Kill the unbalanced tr->ref++ in tracing_buffers_open()
  tracing: Kill trace_array->waiter
  tracing: Do not (ab)use trace_seq in event_id_read()
  tracing: Simplify the iteration logic in f_start/f_next
  tracing: Add ref_data to function and fgraph tracer structs
  tracing: Miscellaneous fixes for trace_array ref counting
  tracing: Fix error handling to ensure instances can always be removed
  tracing/kprobe: Wait for disabling all running kprobe handlers
  tracing/perf: Move the PERF_MAX_TRACE_SIZE check into perf_trace_buf_prepare()
  tracing/syscall: Avoid perf_trace_buf_*() if sys_data->perf_events is empty
  tracing/function: Avoid perf_trace_buf_*() if event_function.perf_events is empty
  tracing: Typo fix on ring buffer comments
  tracing: Use trace_seq_puts()/trace_seq_putc() where possible
  tracing: Use correct config guard CONFIG_STACK_TRACER

Pull thermal management fixes from Zhang Rui:
 "These are fixes collected over the last week, they fixes several
  problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1.

  Specifics:

   - the x86_pkg_temp_thermal driver causes crash on systems with no
     package MSR support as there is a bug in the logic to check
     presence of DTHERM and PTS feature together.  Added a change so
     that when there is no PTS support, module doesn't get loaded.

   - fix krealloc() misuse in pkg_temp_thermal_device_add().

     If krealloc() returns NULL, it doesn't free the original.  Thus if
     we want to exit because of the krealloc() failure, we must make
     sure the original one is freed.

   - The error code path of the x86 package temperature thermal driver's
     initialization routine makes an unbalanced call to
     get_online_cpus(), which causes subsequent CPU offline operations,
     and consequently system suspend, to permanently block in
     cpu_hotplug_begin() on systems where get_core_online() returns an
     error code.

     Remove the extra get_online_cpus() to fix the problem"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  Thermal: Fix lockup of cpu_down()
  Thermal: x86_pkg_temp: Limit number of pkg temp zones
  Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add()
  Thermal: x86 package temp thermal crash