- 29 Jun, 2017 2 commits
-
-
Gao Feng authored
When qdisc fail to init, qdisc_create would invoke the destroy callback to cleanup. But there is no check if the callback exists really. So it would cause the panic if there is no real destroy callback like the qdisc codel, fq, and so on. Take codel as an example following: When a malicious user constructs one invalid netlink msg, it would cause codel_init->codel_change->nla_parse_nested failed. Then kernel would invoke the destroy callback directly but qdisc codel doesn't define one. It causes one panic as a result. Now add one the check for destroy to avoid the possible panic. Fixes: 87b60cfa ("net_sched: fix error recovery at qdisc creation") Signed-off-by:
Gao Feng <gfree.wind@vip.163.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
We don't hold any tx lock when trying to disable TX during reset, this would lead a use after free since ndo_start_xmit() tries to access the virtqueue which has already been freed. Fix this by using netif_tx_disable() before freeing the vqs, this could make sure no tx after vq freeing. Reported-by:
Jean-Philippe Menil <jpmenil@gmail.com> Tested-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Acked-by:
Robert McCabe <robert.mccabe@rockwellcollins.com> Signed-off-by:
-
- 27 Jun, 2017 3 commits
-
-
Andrew F. Davis authored
The Belkin B2B128 is a USB 3.0 Hub + Gigabit Ethernet Adapter, the Ethernet adapter uses the ASIX AX88179 USB 3.0 to Gigabit Ethernet chip supported by this driver, add the USB ID for the same. This patch is based on work by Geoffrey Tran <geoffrey.tran@gmail.com> who has indicated they would like this upstreamed by someone more familiar with the upstreaming process. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Madalin Bucur authored
A previous commit (5567e989) inserted a dependency on DMA API that requires HAS_DMA to be added in Kconfig. Signed-off-by:
Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by:
-
Eric Dumazet authored
Similar to the fix provided by Dominik Heidler in commit 9b3dc0a1 ("l2tp: cast l2tp traffic counter to unsigned") we need to take care of 32bit kernels in dev_get_stats(). When using atomic_long_read(), we add a 'long' to u64 and might misinterpret high order bit, unless we cast to unsigned. Fixes: caf586e5 ("net: add a core netdev->rx_dropped counter") Fixes: 015f0688 ("net: net: add a core netdev->tx_dropped counter") Fixes: 6e7333d3 ("net: add rx_nohandler stat counter") Signed-off-by:
-
- 25 Jun, 2017 3 commits
-
-
WANG Cong authored
We have to reset the sk->sk_rx_dst when we disconnect a TCP connection, because otherwise when we re-connect it this dst reference is simply overridden in tcp_finish_connect(). This fixes a dst leak which leads to a loopback dev refcnt leak. It is a long-standing bug, Kevin reported a very similar (if not same) bug before. Thanks to Andrei for providing such a reliable reproducer which greatly narrows down the problem. Fixes: 41063e9d ("ipv4: Early TCP socket demux.") Reported-by:
Andrei Vagin <avagin@gmail.com> Reported-by:
Kevin Xu <kaiwen.xu@hulu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Wei Wang authored
In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if error occurs. In udp_v6_early_demux(), check for sk_state to make sure it is in TCP_ESTABLISHED state. Together, it makes sure unconnected UDP socket won't be considered as a valid candidate for early demux. v3: add TCP_ESTABLISHED state check in udp_v6_early_demux() v2: fix compilation error Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast") Signed-off-by:
Wei Wang <weiwan@google.com> Acked-by:
Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Mintz, Yuval authored
When mc configuration changes bnx2x_config_mcast() can return 0 for success, negative for failure and positive for benign reason preventing its immediate work, e.g., when the command awaits the completion of a previously sent command. When removing all configured macs on a 578xx adapter, if a positive value would be returned driver would errneously log it as an error. Fixes: c7b7b483 ("bnx2x: Don't flush multicast MACs") Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
- 23 Jun, 2017 7 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Error handling and netpoll fixes. Add missing error handling and fix netpoll handling. The current code handles RX and TX events in netpoll mode and is causing lots of warnings and errors in the RX code path in netpoll mode. The fix is to only handle TX events in netpoll mode. ==================== Signed-off-by: -
Michael Chan authored
To handle netpoll properly, the driver must only handle TX packets during NAPI. Handling RX events cause warnings and errors in netpoll mode. The ndo_poll_controller() method should call napi_schedule() directly so that a NAPI weight of zero will be used during netpoll mode. The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx. In separate rx/tx mode, the ndo_poll_controller() method will only process the tx rings. In combined mode, the rx and tx completion entries are mixed in the completion ring and we need to drop the rx entries and recycle the rx buffers. Add a function bnxt_force_rx_discard() to handle this in netpoll mode when we see rx entries in combined ring mode. Reported-by:
Calvin Owens <calvinowens@fb.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Michael Chan authored
When we get a TPA_END completion to handle a completed LRO packet, it is possible that hardware would indicate errors. The current code is not checking for the error condition. Define the proper error bits and the macro to check for this error and abort properly. Signed-off-by:
-
Richard Cochran authored
The function, skb_complete_tx_timestamp(), used to allow passing in a NULL pointer for the time stamps, but that was changed in commit 62bccb8c ("net-timestamp: Make the clone operation stand-alone from phy timestamping"), and the existing call sites, all of which are in the dp83640 driver, were fixed up. Even though the kernel-doc was subsequently updated in commit 7a76a021 ("net-timestamp: Update skb_complete_tx_timestamp comment"), still a bug fix from Manfred Rudigier came into the driver using the old semantics. Probably Manfred derived that patch from an older kernel version. This fix should be applied to the stable trees as well. Fixes: 81e8f2e9 ("net: dp83640: Fix tx timestamp overflow handling.") Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-06-23 1) Fix xfrm garbage collecting when unregistering a netdevice. From Hangbin Liu. 2) Fix NULL pointer derefernce when exiting a network namespace. From Hangbin Liu. 3) Fix some error codes in pfkey to prevent a NULL pointer derefernce. From Dan Carpenter. 4) Fix NULL pointer derefernce on allocation failure in pfkey. From Dan Carpenter. 5) Adjust IPv6 payload_len to include extension headers. Otherwise we corrupt the packets when doing ESP GRO on transport mode. From Yossi Kuperman. 6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO. From Yossi Kuperman. Please pull or let me know if there are problems. ==================== Signed-off-by: -
WANG Cong authored
The memory allocation size is controlled by user-space, if it is too large just fail silently and return NULL, not to mention there is a fallback allocation later. Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
Michal Kubeček authored
Our customer encountered stuck NFS writes for blocks starting at specific offsets w.r.t. page boundary caused by networking stack sending packets via UFO enabled device with wrong checksum. The problem can be reproduced by composing a long UDP datagram from multiple parts using MSG_MORE flag: sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 1000, MSG_MORE, ...); sendto(sd, buff, 3000, 0, ...); Assume this packet is to be routed via a device with MTU 1500 and NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(), this condition is tested (among others) to decide whether to call ip_ufo_append_data(): ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb)) At the moment, we already have skb with 1028 bytes of data which is not marked for GSO so that the test is false (fragheaderlen is usually 20). Thus we append second 1000 bytes to this skb without invoking UFO. Third sendto(), however, has sufficient length to trigger the UFO path so that we end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb() uses udp_csum() to calculate the checksum but that assumes all fragments have correct checksum in skb->csum which is not true for UFO fragments. When checking against MTU, we need to add skb->len to length of new segment if we already have a partially filled skb and fragheaderlen only if there isn't one. In the IPv6 case, skb can only be null if this is the first segment so that we have to use headersize (length of the first IPv6 header) rather than fragheaderlen (length of IPv6 header of further fragments) for skb == NULL. Fixes: e89e9cf5 ("[IPv4/IPv6]: UFO Scatter-gather approach") Fixes: e4c5e13a ("ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
- 22 Jun, 2017 15 commits
-
-
Martin Habets authored
The 8000 series adapters uses catch-all filters for encapsulated traffic to support filtering VXLAN, NVGRE and GENEVE traffic. This new filter functionality requires a longer MCDI command. This patch increases the size of buffers on stack that were missed, which fixes a kernel panic from the stack protector. Fixes: 9b410801 ("sfc: insert catch-all filters for encapsulated traffic") Signed-off-by:
Martin Habets <mhabets@solarflare.com> Acked-by:
Edward Cree <ecree@solarflare.com> Acked-by: Bert Kenward bkenward@solarflare.com Signed-off-by:
-
Arnd Bergmann authored
This structure member is hidden behind CONFIG_SYSFS, and we get a build error when that is disabled: drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels': drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh': drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'? As the value is only set once to the argument of alloc_netdev_mq(), we can compare against that constant directly. Fixes: ff4a4419 ("netvsc: allow get/set of RSS indirection table") Fixes: 2b01888d ("netvsc: allow more flexible setting of number of channels") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
-
WANG Cong authored
The per netns loopback_dev->ip6_ptr is unregistered and set to NULL when its mtu is set to smaller than IPV6_MIN_MTU, this leads to that we could set rt->rt6i_idev NULL after a rt6_uncached_list_flush_dev() and then crash after another call. In this case we should just bring its inet6_dev down, rather than unregistering it, at least prior to commit 176c39af ("netns: fix addrconf_ifdown kernel panic") we always override the case for loopback. Thanks a lot to Andrey for finding a reliable reproducer. Fixes: 176c39af ("netns: fix addrconf_ifdown kernel panic") Reported-by:
David Ahern <dsahern@gmail.com> Tested-by:
-
David S. Miller authored
Vladislav Yasevich says: ==================== macvlan: Fix some issues with changing mac addresses There are some issues in macvlan wrt to changing it's mac address. * An error is returned in the specified address is the same as an already assigned address. * In passthru mode, the mac address of the macvlan device doesn't change. * After changing the mac address of a passthru macvlan and then removing it, the mac address of the physical device remains changed. This patch series attempts to resolve these issues. V2: Address a small issue in p4 where we save the address from the lowerdev (from girish.moodalbail@oracle.com) ==================== Signed-off-by: -
Vlad Yasevich authored
Passthru macvlans directly change the mac address of the lower level device. That's OK, but after the macvlan is deleted, the lower device is left with changed address and one needs to reboot to bring back the origina HW addresses. This scenario is actually quite common with passthru macvtap devices. This patch attempts to solve this, by storing the mac address of the lower device in macvlan_port structure and keeping track of it through the changes. After this patch, any changes to the lower device mac address done trough the macvlan device, will be reverted back. Any changs done directly to the lower device mac address will be kept. Signed-off-by:
-
Vlad Yasevich authored
Convert the port passthru boolean into flags with accesor functions. Signed-off-by:
-
Vlad Yasevich authored
When a lower device of the passthru macvlan changes it's address, passthru macvlan is supposed to change it's own address as well. However, that doesn't happen correctly because the check in macvlan_addr_busy() will catch the fact that the lower level (port) mac address is the same as the address we are trying to assign to the macvlan, and return an error. As a reasult, the address of the passthru macvlan device is never changed. The same thing happens when the user attempts to change the mac address of the passthru macvlan. The simple solution appers to be to not check against the lower device in case of passthru macvlan device, since the 2 addresses are _supposed_ to be the same. Signed-off-by:
-
Vlad Yasevich authored
The user currently gets an EBUSY error when attempting to set the mac address on a macvlan device to the same value. This should really be a no-op as nothing changes. Catch the condition and return early. Signed-off-by:
-
Wei Liu authored
Add a flag to indicate if a queue is rate-limited. Test the flag in NAPI poll handler and avoid rescheduling the queue if true, otherwise we risk locking up the host. The rescheduling will be done in the timer callback function. Reported-by:
Jean-Louis Dupond <jean-louis@dupond.be> Signed-off-by:
Wei Liu <wei.liu2@citrix.com> Tested-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
-
Serhey Popovych authored
There are number of problems with configuration peer network device in absence of IFLA_VETH_PEER attributes where attributes for main network device shared with peer. First it is not feasible to configure both network devices with same MAC address since this makes communication in such configuration problematic. This case can be reproduced with following sequence: # ip link add address 02:11:22:33:44:55 type veth # ip li sh ... 26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff 27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \ noop state DOWN mode DEFAULT qlen 1000 link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff Second it is not possible to register both main and peer network devices with same name, that happens when name for main interface is given with IFLA_IFNAME and same attribute reused for peer. This case can be reproduced with following sequence: # ip link add dev veth1a type veth RTNETLINK answers: File exists To fix both of the cases check if corresponding netlink attributes are taken from peer_tb when valid or name based on rtnl ops kind and random address is used. Signed-off-by:Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
-
Lokesh Vutla authored
cpsw driver tries to get macid for am43xx SoCs using the compatible ti,am4372. But not all variants of am43x uses this complatible like epos evm uses ti,am438x. So use a generic compatible ti,am43 to get macid for all am43 based platforms. Reviewed-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by:
-
WANG Cong authored
In commit 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired, unfortunately, as reported by jeffy, netdev_wait_allrefs() could rebroadcast NETDEV_UNREGISTER event until all refs are gone. We have to add an additional check to avoid this corner case. For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED, for dev_change_net_namespace(), dev->reg_state is NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED. Fixes: 242d3a49 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf") Reported-by:
jeffy <jeffy.chen@rock-chips.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
Zach Brown authored
The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an autoneg failure case by resetting the hardware. This turns off intterupts. Things will work themselves out if the phy polls, as it will figure out it's state during a poll. However if the phy uses only intterupts, the phy will stall, since interrupts are off. This patch fixes the issue by calling config_intr after resetting the phy. Fixes: d2fd719b ("net/phy: micrel: Add workaround for bad autoneg ") Signed-off-by:Zach Brown <zach.brown@ni.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Yossi Kuperman authored
IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6 header, unless there are extension headers present, in which case nhoff points to the nexthdr field of the last extension header. In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code is executed. Conversely, in GRO code path (when esp6_offload is loaded), nhoff is not set. The following functions fail to read the correct value and eventually the packet is dropped: xfrm6_transport_finish xfrm6_tunnel_input xfrm6_rcv_tnl Set nhoff to the proper offset of nexthdr in esp6_gro_receive. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:Yossi Kuperman <yossiku@mellanox.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Yossi Kuperman authored
IPv6 payload length indicates the size of the payload, including any extension headers. In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the payload size only, regardless of the presence of any extension headers. After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet according to the wrong payload_len, thus corrupting the packet. Set payload_len to account for extension headers as well. Fixes: 7785bba2 ("esp: Add a software GRO codepath") Signed-off-by:
-
- 21 Jun, 2017 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix refcounting wrt timers which hold onto inet6 address objects, from Xin Long. 2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg. 3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel. 4) Several mlx5 driver fixes (firmware readiness, timestamp cap reporting, devlink command validity checking, tc offloading, etc.) From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz. 5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan. 6) Fix dst refcount bug in decnet, from Wei Wang. 7) Netdev can be double freed in register_vlan_device(). Fix from Gao Feng. 8) Don't allow object to be destroyed while it is being dumped in SCTP, from Xin Long. 9) Fix dpaa_eth build when modular, from Madalin Bucur. 10) Fix throw route leaks, from Serhey Popovych. 11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table, also from Serhey Popovych. 12) Fix premature TX SKB free in stmmac, from Niklas Cassel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits) igmp: add a missing spin_lock_init() net: stmmac: free an skb first when there are no longer any descriptors using it sfc: remove duplicate up_write on VF filter_sem rtnetlink: add IFLA_GROUP to ifla_policy ipv6: Do not leak throw route references dt-bindings: net: sms911x: Add missing optional VDD regulators dpaa_eth: reuse the dma_ops provided by the FMan MAC device fsl/fman: propagate dma_ops net/core: remove explicit do_softirq() from busy_poll_stop() fib_rules: Resolve goto rules target on delete sctp: ensure ep is not destroyed before doing the dump net/hns:bugfix of ethtool -t phy self_test net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev cxgb4: notify uP to route ctrlq compl to rdma rspq ip6_tunnel: Correct tos value in collect_md mode decnet: always not take dst->__refcnt when inserting dst into hash table ip6_tunnel: fix potential issue in __ip6_tnl_rcv ip_tunnel: fix potential issue in ip_tunnel_rcv brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2() net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it ... -
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull more pin control fixes from Linus Walleij: "Some late arriving fixes. I should have sent earlier, just swamped with work as usual. Thomas patch makes AMD systems usable despite firmware bugs so it is fairly important. - Make the AMD driver use a regular interrupt rather than a chained one, so the system does not lock up. - Fix a function call error deep inside the STM32 driver" * tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: stm32: Fix bad function call pinctrl/amd: Use regular interrupt instead of chained -
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - revert of a commit to magicmouse driver that regressess certain devices, from Daniel Stone - quirk for a specific Dell mouse, from Sebastian Parschauer * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse" HID: Add quirk for Dell PIXART OEM mouse
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatchingLinus Torvalds authored
Pull livepatching fix from Jiri Kosina: "Fix the way how livepatches are being stacked with respect to RCU, from Petr Mladek" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: Fix stacking of patches with respect to RCU
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more ufs fixes from Al Viro: "More UFS fixes, unfortunately including build regression fix for the 64-bit s_dsize commit. Fixed in this pile: - trivial bug in signedness of 32bit timestamps on ufs1 - ESTALE instead of ufs_error() when doing open-by-fhandle on something deleted - build regression on 32bit in ufs_new_fragments() - calculating that many percents of u64 pulls libgcc stuff on some of those. Mea culpa. - fix hysteresis loop broken by typo in 2.4.14.7 (right next to the location of previous bug). - fix the insane limits of said hysteresis loop on filesystems with very low percentage of reserved blocks. If it's 5% or less, just use the OPTSPACE policy. - calculate those limits once and mount time. This tree does pass xfstests clean (both ufs1 and ufs2) and it _does_ survive cross-builds. Again, my apologies for missing that, especially since I have noticed a related percentage-of-64bit issue in earlier patches (when dealing with amount of reserved blocks). Self-LART applied..." * 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix the logics for tail relocation ufs_iget(): fail with -ESTALE on deleted inode fix signedness of timestamps on ufs1 -
Helge Deller authored
Fix expand_upwards() on architectures with an upward-growing stack (parisc, metag and partly IA-64) to allow the stack to reliably grow exactly up to the address space limit given by TASK_SIZE. Signed-off-by:
Helge Deller <deller@gmx.de> Acked-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of mmap testing. That's the VM_BUG_ON(gap_end < gap_start) at the end of unmapped_area_topdown(). Linus points out how MAP_FIXED (which does not have to respect our stack guard gap intentions) could result in gap_end below gap_start there. Fix that, and the similar case in its alternative, unmapped_area(). Cc: stable@vger.kernel.org Fixes: 1be7107f ("mm: larger stack guard gap, between vmas") Reported-by:
Dave Jones <davej@codemonkey.org.uk> Debugged-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
- 20 Jun, 2017 3 commits
-
-
WANG Cong authored
Andrey reported a lockdep warning on non-initialized spinlock: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x292/0x395 lib/dump_stack.c:52 register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755 ? 0xffffffffa0000000 __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255 lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855 __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135 _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175 spin_lock_bh ./include/linux/spinlock.h:304 ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076 igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194 ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736 We miss a spin_lock_init() in igmpv3_add_delrec(), probably because previously we never use it on this code path. Since we already unlink it from the global mc_tomb list, it is probably safe not to acquire this spinlock here. It does not harm to have it although, to avoid conditional locking. Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()") Reported-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2017-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.12 Two important fixes for brcmfmac. The rest of the brcmfmac patches are either code preparation and fixing a new build warning. brcmfmac * fix a NULL pointer dereference during resume * fix a NULL pointer dereference with USB devices, a regression from v4.12-rc1 ==================== Signed-off-by:
-
Niklas Cassel authored
When having the skb pointer in the first descriptor, stmmac_tx_clean can get called at a moment where the IP has only cleared the own bit of the first descriptor, thus freeing the skb, even though there can be several descriptors whose buffers point into the same skb. By simply moving the skb pointer from the first descriptor to the last descriptor, a skb will get freed only when the IP has cleared the own bit of all the descriptors that are using that skb. Signed-off-by:
Niklas Cassel <niklas.cassel@axis.com> Signed-off-by:
-
