Skip to content

L
linux
Switch branch/tag
  1. 04 Dec, 2013 29 commits
  3. 29 Nov, 2013 11 commits
    • Greg Kroah-Hartman's avatar
      Linux 3.10.21 · 43d8b1ef
      Greg Kroah-Hartman authored
      43d8b1ef
    • Rob Pearce's avatar
      drm/i915: No LVDS hardware on Intel D410PT and D425KT · 215948b1
      Rob Pearce authored 
      commit 645378d8 upstream.

The Intel D410PT(LW) and D425KT Mini-ITX desktop boards both show up as
having LVDS but the hardware is not populated. This patch adds them to
the list of such systems. Patch is against 3.11.4

v2: Patch revised to match the D425KT exactly as the D425KTW does have
LVDS.  According to Intel's documentation, the D410PTL and D410PLTW
don't.
Signed-off-by: default avatarRob Pearce <rob@flitspace.org.uk>
[danvet: Pimp commit message to my liking and add cc: stable.]
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      215948b1
    • Chris Wilson's avatar
      drm/i915: quirk away phantom LVDS on Intel's D510MO mainboard · 2df22e6f
      Chris Wilson authored 
      commit e5614f0c upstream.

This replaceable mainboard only has a VGA-out, yet it claims to also have
a connected LVDS header.

Addresses https://bugs.freedesktop.org/show_bug.cgi?id=63860

[jani.nikula@intel.com: use DMI_EXACT_MATCH for board name.]
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Reported-by: <annndddrr@gmail.com>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2df22e6f
    • Jani Nikula's avatar
      dmi: add support for exact DMI matches in addition to substring matching · e3e129e7
      Jani Nikula authored 
      commit 5017b285 upstream.

dmi_match() considers a substring match to be a successful match.  This is
not always sufficient to distinguish between DMI data for different
systems.  Add support for exact string matching using strcmp() in addition
to the substring matching using strstr().

The specific use case in the i915 driver is to allow us to use an exact
match for D510MO, without also incorrectly matching D510MOV:

  {
	.ident = "Intel D510MO",
	.matches = {
		DMI_MATCH(DMI_BOARD_VENDOR, "Intel"),
		DMI_EXACT_MATCH(DMI_BOARD_NAME, "D510MO"),
	},
  }
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
Cc: <annndddrr@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Cornel Panceac <cpanceac@gmail.com>
Acked-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e3e129e7
    • Mauro Carvalho Chehab's avatar
      cris: media platform drivers: fix build · a8e25439
      Mauro Carvalho Chehab authored 
      commit 72a0c557 upstream.

On cris arch, the functions below aren't defined:

  drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_read':

  drivers/media/platform/sh_veu.c:228:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/sh_veu.c: In function 'sh_veu_reg_write':

  drivers/media/platform/sh_veu.c:234:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read':
  drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write':
  drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_read':
  drivers/media/platform/vsp1/vsp1.h:66:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]
  drivers/media/platform/vsp1/vsp1.h: In function 'vsp1_write':
  drivers/media/platform/vsp1/vsp1.h:71:2: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]
  drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_setup':
  drivers/media/platform/soc_camera/rcar_vin.c:284:3: error: implicit declaration of function 'iowrite32' [-Werror=implicit-function-declaration]

  drivers/media/platform/soc_camera/rcar_vin.c: In function 'rcar_vin_request_capture_stop':
  drivers/media/platform/soc_camera/rcar_vin.c:353:2: error: implicit declaration of function 'ioread32' [-Werror=implicit-function-declaration]

Yet, they're available, as CONFIG_GENERIC_IOMAP is defined.  What happens
is that asm/io.h was not including asm-generic/iomap.h.
Suggested-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a8e25439
    • Junxiao Bi's avatar
      configfs: fix race between dentry put and lookup · 7a4ca203
      Junxiao Bi authored 
      commit 76ae281f upstream.

A race window in configfs, it starts from one dentry is UNHASHED and end
before configfs_d_iput is called.  In this window, if a lookup happen,
since the original dentry was UNHASHED, so a new dentry will be
allocated, and then in configfs_attach_attr(), sd->s_dentry will be
updated to the new dentry.  Then in configfs_d_iput(),
BUG_ON(sd->s_dentry != dentry) will be triggered and system panic.

sys_open:                     sys_close:
 ...                           fput
                                dput
                                 dentry_kill
                                  __d_drop <--- dentry unhashed here,
                                           but sd->dentry still point
                                           to this dentry.

 lookup_real
  configfs_lookup
   configfs_attach_attr---> update sd->s_dentry
                            to new allocated dentry here.

                                   d_kill
                                     configfs_d_iput <--- BUG_ON(sd->s_dentry != dentry)
                                                     triggered here.

To fix it, change configfs_d_iput to not update sd->s_dentry if
sd->s_count > 2, that means there are another dentry is using the sd
beside the one that is going to be put.  Use configfs_dirent_lock in
configfs_attach_attr to sync with configfs_d_iput.

With the following steps, you can reproduce the bug.

1. enable ocfs2, this will mount configfs at /sys/kernel/config and
   fill configure in it.

2. run the following script.
	while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done &
	while [ 1 ]; do cat /sys/kernel/config/cluster/$your_cluster_name/idle_timeout_ms > /dev/null; done &
Signed-off-by: default avatarJunxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7a4ca203
    • Martin Schwidefsky's avatar
      s390/vtime: correct idle time calculation · d4f2a840
      Martin Schwidefsky authored 
      commit 4560e7c3 upstream.

Use the ACCESS_ONCE macro for both accesses to idle->sequence in the
loops to calculate the idle time. If only one access uses the macro,
the compiler is free to cache the value for the second access which
can cause endless loops.
Signed-off-by: default avatarMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d4f2a840
    • Stanislaw Gruszka's avatar
      rt2800usb: slow down TX status polling · f3170c7a
      Stanislaw Gruszka authored 
      commit 36165fd5 upstream.

Polling TX statuses too frequently has two negative effects. First is
randomly peek CPU usage, causing overall system functioning delays.
Second bad effect is that device is not able to fill TX statuses in
H/W register on some workloads and we get lot of timeouts like below:

ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_entry_txstatus_timeout: Warning - TX status timeout for entry 7 in queue 2
ieee80211 phy4: rt2800usb_txdone: Warning - Got TX status for an empty queue 2, dropping

This not only cause flood of messages in dmesg, but also bad throughput,
since rate scaling algorithm can not work optimally.

In the future, we should probably make polling interval be adjusted
automatically, but for now just increase values, this make mentioned
problems gone.

Resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=62781Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f3170c7a
    • Julius Werner's avatar
      usb: hub: Clear Port Reset Change during init/resume · 1316580f
      Julius Werner authored 
      commit e92aee33 upstream.

This patch adds the Port Reset Change flag to the set of bits that are
preemptively cleared on init/resume of a hub. In theory this bit should
never be set unexpectedly... in practice it can still happen if BIOS,
SMM or ACPI code plays around with USB devices without cleaning up
correctly. This is especially dangerous for XHCI root hubs, which don't
generate any more Port Status Change Events until all change bits are
cleared, so this is a good precaution to have (similar to how it's
already done for the Warm Port Reset Change flag).
Signed-off-by: default avatarJulius Werner <jwerner@chromium.org>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1316580f
    • Tomas Winkler's avatar
      mei: nfc: fix memory leak in error path · bd7e0818
      Tomas Winkler authored 
      commit 4bff7208 upstream.

The flow may reach the err label without freeing cl and cl_info

cl and cl_info weren't assigned to ndev->cl and cl_info
so they weren't freed in mei_nfc_free called on error path

Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: default avatarTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bd7e0818
    • Trond Myklebust's avatar
      SUNRPC: Fix a data corruption issue when retransmitting RPC calls · 7adb1205
      Trond Myklebust authored 
      commit a6b31d18 upstream.

The following scenario can cause silent data corruption when doing
NFS writes. It has mainly been observed when doing database writes
using O_DIRECT.

1) The RPC client uses sendpage() to do zero-copy of the page data.
2) Due to networking issues, the reply from the server is delayed,
   and so the RPC client times out.

3) The client issues a second sendpage of the page data as part of
   an RPC call retransmission.

4) The reply to the first transmission arrives from the server
   _before_ the client hardware has emptied the TCP socket send
   buffer.
5) After processing the reply, the RPC state machine rules that
   the call to be done, and triggers the completion callbacks.
6) The application notices the RPC call is done, and reuses the
   pages to store something else (e.g. a new write).

7) The client NIC drains the TCP socket send buffer. Since the
   page data has now changed, it reads a corrupted version of the
   initial RPC call, and puts it on the wire.

This patch fixes the problem in the following manner:

The ordering guarantees of TCP ensure that when the server sends a
reply, then we know that the _first_ transmission has completed. Using
zero-copy in that situation is therefore safe.
If a time out occurs, we then send the retransmission using sendmsg()
(i.e. no zero-copy), We then know that the socket contains a full copy of
the data, and so it will retransmit a faithful reproduction even if the
RPC call completes, and the application reuses the O_DIRECT buffer in
the meantime.
Signed-off-by: default avatarTrond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7adb1205
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7