Add the qfprom node and its properties for the sc7280 SoC.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1627627573-32454-5-git-send-email-rnayak@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Fixup the register regions used by the cpufreq node on SC7280 SoC to
support per core L3 DCVS.

Fixes: 7dbd121a ("arm64: dts: qcom: sc7280: Add cpufreq hw node")
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627581885-32165-4-git-send-email-sibis@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

According to Bjorn Andersson[1], &tcsr_q6 base is 0x01937000 with size
0x21000. Adjust qcom,halt-regs offsets (add 0xe000) to match the new
syscon base.

Also, rename to just &tcsr as Kathiravan T suggested.

[1] https://lore.kernel.org/r/YLgO0Aj1d4w9EcPv@yogaSigned-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/889aae1b88f120cb6281919d27164a959fbe69d0.1626948070.git.baruch@tkos.co.ilSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add dai link in sc7180-trogdor.dtsi for supporting audio over DP
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Updaate lpass dts node with HDMI reg, interrupt and iommu
for supporting audio over dp.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210721080549.28822-2-srivasam@qti.qualcomm.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the correct patch to the ipa firmware now that custom paths are
supported.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210720153125.43389-6-caleb@connolly.techSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

A labelled diagram showing the location of the Rx and Tx testpoints for
the OnePlus 6 is available on the postmarketOS wiki:

https://wiki.postmarketos.org/wiki/Serial_debugging:Cable_schematics

The device uses 1.8v UART at a baud rate of 115200, bootloader output is
also available here.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210720153125.43389-3-caleb@connolly.techSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

In order to conform with downstream and upstream for previous generations
of this hardware, rename dt-node 'qupv3_id_1' to 'qupv3_id_0'.

Fixes: b7e8f433 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://lore.kernel.org/r/20210803125756.93824-1-robert.foss@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Remove pm8350 and pmr735b die temp nodes as these pmics are
not present on this board.

Correct the tabbing for pmk8350_vadc node.

Fixes: fbd5a1d2 ("arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures to sc7280-idp")
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627995852-24505-1-git-send-email-skakit@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add interconnect properties in USB DT nodes for sc7280.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1627880576-22391-1-git-send-email-sanm@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Remove the bus clock from the mdss device node, in order to facilitate
bus band width scaling on sm8250 target.

The parent device MDSS will not vote for bus bw, instead the vote will
be triggered by mdp device node. Since a minimum vote is required to
turn on bus clock, and since mdp device node already has the bus clock,
remove the clock from the mdss device.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210803101657.1072358-3-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Move the bus clock to mdp device node,in order to facilitate bus band
width scaling on sdm845 target.

The parent device MDSS will not vote for bus bw, instead the vote will
be triggered by mdp device node. Since a minimum vote is required to
turn on bus clock, move the clock node to mdp device from where the
votes are requested.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210803101657.1072358-2-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Now that TLMM has the wakeup table, specify the Power Domain Controller
to be the wakeup-parent of TLMM.
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312034218.3324410-2-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

modified QFPROM controller CORRECTED region size as per RAW region size
Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1613582792-5225-1-git-send-email-rbokka@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The unit address of the epss_l3 node is incorrect and does not match
the address of its "reg" property. Let's fix it.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add cooling-cells property and cooling maps for the GPU.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/Ku7mRZ_q2mYDZQ048IPlAc8VOVhH8N4uENhMI-JXxjeiZxjbRRs40ZJYwREb_ScgCvtQgtdl1VRjoDd7CR_8vCrbWVe8n3MwyB1S3VbSDis=@protonmail.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

It makes no sense to require one more step to enable the PMIC features.
If the PMIC is present, it already has to be explicitly #included anyway.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210225213842.117694-1-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

qcom,mtp is used msm8916-mtp.dts but not documented, it is a generic mtp
compatible and we have specfifc ones for each mtp so drop this

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916', 'qcom,mtp'] is too long
        Additional items are not allowed ('qcom,msm8916', 'qcom,mtp' were unexpected)
        Additional items are not allowed ('qcom,mtp' was unexpected)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-8-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Document the alcatel,idol347 board. It was missing leading to warning:

arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        Additional items are not allowed ('qcom,msm8916' was unexpected)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-7-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We have underscore (_) in node name leading to warning:

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]}

Fix this by changing node name to use dash (-)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We have underscore (_) in node name leading to warning:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]}
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]}

Fix this by changing node name to use dash (-)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org
[bjorn: Added clock-output-names to satisfy parent_names]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We have underscore (_) in node name so fix that up as well.

Fix this by changing node name to use dash (-)
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Nodes need not contain '0x' for the unit address. Drop it to fix the
below warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory:
'memory@0x60000' does not match any of the regexes
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

memory node like other node should be node@reg, which is missing in this
case, so fix it up

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

reg property should be array of values, here it is a single array,
leading to below warning:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null'
[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null'
[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-17-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-15-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-14-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-13-vkoul@kernel.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This commits add support for Sony Xperia 10II based on the SM6125 SoC.

Currently working features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- Volume down button
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-2-martin.botka@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This commits adds the Device tree file for SM6125 SoC.
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-1-martin.botka@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add dma properties to I2C and SPI nodes to make sure DMA transfers can go
through. While at it, fix up the property order in SPI nodes to make #address-
and #size-cells go after all the meaningful properties.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615142249.170512-1-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Shuffle memory regions to make firmware loading succeed and then enable
the ipa device.
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20210615232816.835325-1-bjorn.andersson@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add DMA properties to I2C hosts to allow for DMA transfers.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-40-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This was overlooked earlier, fix it to ensure the busses can
work properly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-39-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The autorepeat feature is not needed on gpio-keys.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-38-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable the internal uSD slot to let the user have more storage.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-37-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-36-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Delete the node on Ganges devices, as they use a different one.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-35-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

After further consideration, it is not worth to keep another
separate DTSI, as the differences between Nile and Ganges are
very minimal. Instead, let's just address the minimal differences
between Kirin and Mermaid.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-34-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Let's get loud!
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-33-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>