1. 09 Jun, 2019 40 commits
    • Thomas Hellstrom's avatar
      drm/vmwgfx: Fix compat mode shader operation · c1d4043b
      Thomas Hellstrom authored
      commit e41c20cf upstream.
      
      In compat mode, we allowed host-backed user-space with guest-backed
      kernel / device. In this mode, set shader commands was broken since
      no relocations were emitted. Fix this.
      
      Cc: <stable@vger.kernel.org>
      Fixes: e8c66efb ("drm/vmwgfx: Make user resource lookups reference-free during validation")
      Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
      Reviewed-by: default avatarBrian Paul <brianp@vmware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c1d4043b
    • Thomas Hellstrom's avatar
      drm/vmwgfx: Fix user space handle equal to zero · 7cb13911
      Thomas Hellstrom authored
      commit 8407f8a1 upstream.
      
      User-space handles equal to zero are interpreted as uninitialized or
      illegal by some drm systems (most notably kms). This means that a
      dumb buffer or surface with a zero user-space handle can never be
      used as a kms frame-buffer.
      
      Cc: <stable@vger.kernel.org>
      Fixes: c7eae626 ("drm/vmwgfx: Make the object handles idr-generated")
      Signed-off-by: default avatarThomas Hellstrom <thellstrom@vmware.com>
      Reviewed-by: default avatarDeepak Rawat <drawat@vmware.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7cb13911
    • Dmitry Osipenko's avatar
      drm/tegra: gem: Fix CPU-cache maintenance for BO's allocated using get_pages() · 37dfbf0a
      Dmitry Osipenko authored
      commit 61b51fb5 upstream.
      
      The allocated pages need to be invalidated in CPU caches. On ARM32 the
      DMA_BIDIRECTIONAL flag only ensures that data is written-back to DRAM and
      the data stays in CPU cache lines. While the DMA_FROM_DEVICE flag ensures
      that the corresponding CPU cache lines are getting invalidated and nothing
      more, that's exactly what is needed for a newly allocated pages.
      
      This fixes randomly failing rendercheck tests on Tegra30 using the
      Opentegra driver for tests that use small-sized pixmaps (10x10 and less,
      i.e. 1-2 memory pages) because apparently CPU reads out stale data from
      caches and/or that data is getting evicted to DRAM at the time of HW job
      execution.
      
      Fixes: bd43c9f0 ("drm/tegra: gem: Map pages via the DMA API")
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarDmitry Osipenko <digetx@gmail.com>
      Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      37dfbf0a
    • Kees Cook's avatar
      gcc-plugins: Fix build failures under Darwin host · c011c3e1
      Kees Cook authored
      commit 7210e060 upstream.
      
      The gcc-common.h file did not take into account certain macros that
      might have already been defined in the build environment. This updates
      the header to avoid redefining the macros, as seen on a Darwin host
      using gcc 4.9.2:
      
       HOSTCXX -fPIC scripts/gcc-plugins/arm_ssp_per_task_plugin.o - due to: scripts/gcc-plugins/gcc-common.h
      In file included from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:0:
      scripts/gcc-plugins/gcc-common.h:153:0: warning: "__unused" redefined
      ^
      In file included from /usr/include/stdio.h:64:0,
                      from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/system.h:40,
                      from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/gcc-plugin.h:28,
                      from /Users/hns/Documents/Projects/QuantumSTEP/System/Library/Frameworks/System.framework/Versions-jessie/x86_64-apple-darwin15.0.0/gcc/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.9.2/plugin/include/plugin.h:23,
                      from scripts/gcc-plugins/gcc-common.h:9,
                      from scripts/gcc-plugins/arm_ssp_per_task_plugin.c:3:
      /usr/include/sys/cdefs.h:161:0: note: this is the location of the previous definition
      ^
      Reported-and-tested-by: default avatar"H. Nikolaus Schaller" <hns@goldelico.com>
      Fixes: 189af465 ("ARM: smp: add support for per-task stack canaries")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c011c3e1
    • Benjamin Coddington's avatar
      Revert "lockd: Show pid of lockd for remote locks" · 66c076d6
      Benjamin Coddington authored
      commit 141731d1 upstream.
      
      This reverts most of commit b8eee0e9 ("lockd: Show pid of lockd for
      remote locks"), which caused remote locks to not be differentiated between
      remote processes for NLM.
      
      We retain the fixup for setting the client's fl_pid to a negative value.
      
      Fixes: b8eee0e9 ("lockd: Show pid of lockd for remote locks")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBenjamin Coddington <bcodding@redhat.com>
      Reviewed-by: default avatarXueWei Zhang <xueweiz@google.com>
      Signed-off-by: default avatarJ. Bruce Fields <bfields@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      66c076d6
    • Roberto Bergantinos Corpas's avatar
      CIFS: cifs_read_allocate_pages: don't iterate through whole page array on ENOMEM · b3f15a84
      Roberto Bergantinos Corpas authored
      commit 31fad7d4 upstream.
      
       In cifs_read_allocate_pages, in case of ENOMEM, we go through
      whole rdata->pages array but we have failed the allocation before
      nr_pages, therefore we may end up calling put_page with NULL
      pointer, causing oops
      Signed-off-by: default avatarRoberto Bergantinos Corpas <rbergant@redhat.com>
      Acked-by: default avatarPavel Shilovsky <pshilov@microsoft.com>
      Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      CC: Stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b3f15a84
    • Colin Ian King's avatar
      cifs: fix memory leak of pneg_inbuf on -EOPNOTSUPP ioctl case · 28341796
      Colin Ian King authored
      commit 21078203 upstream.
      
      Currently in the case where SMB2_ioctl returns the -EOPNOTSUPP error
      there is a memory leak of pneg_inbuf. Fix this by returning via
      the out_free_inbuf exit path that will perform the relevant kfree.
      
      Addresses-Coverity: ("Resource leak")
      Fixes: 969ae8e8 ("cifs: Accept validate negotiate if server return NT_STATUS_NOT_SUPPORTED")
      CC: Stable <stable@vger.kernel.org> # v5.1+
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarSteve French <stfrench@microsoft.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      28341796
    • Tim Collier's avatar
      staging: wlan-ng: fix adapter initialization failure · 31674975
      Tim Collier authored
      commit a67fedd7 upstream.
      
      Commit e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long
      code line warnings.") moved the retrieval of the transfer buffer from
      the URB from the top of function hfa384x_usbin_callback to a point
      after reposting of the URB via a call to submit_rx_urb. The reposting
      of the URB allocates a new transfer buffer so the new buffer is
      retrieved instead of the buffer containing the response passed into
      the callback. This results in failure to initialize the adapter with
      an error reported in the system log (something like "CTLX[1] error:
      state(Request failed)").
      
      This change moves the retrieval to just before the point where the URB
      is reposted so that the correct transfer buffer is retrieved and
      initialization of the device succeeds.
      Signed-off-by: default avatarTim Collier <osdevtc@gmail.com>
      Fixes: e895f00a ("Staging: wlan-ng: hfa384x_usb.c Fixed too long code line warnings.")
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      31674975
    • Dan Carpenter's avatar
      staging: vc04_services: prevent integer overflow in create_pagelist() · 886c20bc
      Dan Carpenter authored
      commit ca641bae upstream.
      
      The create_pagelist() "count" parameter comes from the user in
      vchiq_ioctl() and it could overflow.  If you look at how create_page()
      is called in vchiq_prepare_bulk_data(), then the "size" variable is an
      int so it doesn't make sense to allow negatives or larger than INT_MAX.
      
      I don't know this code terribly well, but I believe that typical values
      of "count" are typically quite low and I don't think this check will
      affect normal valid uses at all.
      
      The "pagelist_size" calculation can also overflow on 32 bit systems, but
      not on 64 bit systems.  I have added an integer overflow check for that
      as well.
      
      The Raspberry PI doesn't offer the same level of memory protection that
      x86 does so these sorts of bugs are probably not super critical to fix.
      
      Fixes: 71bad7f0 ("staging: add bcm2708 vchiq driver")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      886c20bc
    • George G. Davis's avatar
      serial: sh-sci: disable DMA for uart_console · 26b29a6c
      George G. Davis authored
      commit 099506cb upstream.
      
      As noted in commit 84b40e3b ("serial: 8250: omap: Disable DMA for
      console UART"), UART console lines use low-level PIO only access functions
      which will conflict with use of the line when DMA is enabled, e.g. when
      the console line is also used for systemd messages. So disable DMA
      support for UART console lines.
      Reported-by: default avatarMichael Rodin <mrodin@de.adit-jv.com>
      Link: https://patchwork.kernel.org/patch/10929511/Tested-by: default avatarEugeniu Rosca <erosca@de.adit-jv.com>
      Reviewed-by: default avatarSimon Horman <horms+renesas@verge.net.au>
      Reviewed-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
      Reviewed-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarGeorge G. Davis <george_davis@mentor.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      26b29a6c
    • Grzegorz Halat's avatar
      vt/fbcon: deinitialize resources in visual_init() after failed memory allocation · 863f40c7
      Grzegorz Halat authored
      commit a1ad1cc9 upstream.
      
      After memory allocation failure vc_allocate() doesn't clean up data
      which has been initialized in visual_init(). In case of fbcon this
      leads to divide-by-0 in fbcon_init() on next open of the same tty.
      
      memory allocation in vc_allocate() may fail here:
      1097:     vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
      
      on next open() fbcon_init() skips vc_font.data initialization:
      1088:     if (!p->fontdata) {
      
      division by zero in fbcon_init() happens here:
      1149:     new_cols /= vc->vc_font.width;
      
      Additional check is needed in fbcon_deinit() to prevent
      usage of uninitialized vc_screenbuf:
      
      1251:        if (vc->vc_hi_font_mask && vc->vc_screenbuf)
      1252:                set_vc_hi_font(vc, false);
      
      Crash:
      
       #6 [ffffc90001eafa60] divide_error at ffffffff81a00be4
          [exception RIP: fbcon_init+463]
          RIP: ffffffff814b860f  RSP: ffffc90001eafb18  RFLAGS: 00010246
      ...
       #7 [ffffc90001eafb60] visual_init at ffffffff8154c36e
       #8 [ffffc90001eafb80] vc_allocate at ffffffff8154f53c
       #9 [ffffc90001eafbc8] con_install at ffffffff8154f624
      ...
      Signed-off-by: default avatarGrzegorz Halat <ghalat@redhat.com>
      Reviewed-by: default avatarOleksandr Natalenko <oleksandr@redhat.com>
      Acked-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      863f40c7
    • Peng Fan's avatar
      clk: imx: imx8mm: fix int pll clk gate · 62f3e22c
      Peng Fan authored
      commit b3fddd5b upstream.
      
      To Frac pll, the gate shift is 13, however to Int PLL the gate shift
      is 11.
      
      Cc: <stable@vger.kernel.org>
      Fixes: ba5625c3 ("clk: imx: Add clock driver support for imx8mm")
      Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
      Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
      Reviewed-by: default avatarJacky Bai <ping.bai@nxp.com>
      Signed-off-by: default avatarStephen Boyd <sboyd@kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      62f3e22c
    • Roberto Sassu's avatar
      evm: check hash algorithm passed to init_desc() · 2f20066d
      Roberto Sassu authored
      commit 221be106 upstream.
      
      This patch prevents memory access beyond the evm_tfm array by checking the
      validity of the index (hash algorithm) passed to init_desc(). The hash
      algorithm can be arbitrarily set if the security.ima xattr type is not
      EVM_XATTR_HMAC.
      
      Fixes: 5feeb611 ("evm: Allow non-SHA1 digital signatures")
      Signed-off-by: default avatarRoberto Sassu <roberto.sassu@huawei.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarMimi Zohar <zohar@linux.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2f20066d
    • Roberto Sassu's avatar
      ima: show rules with IMA_INMASK correctly · b2164f6c
      Roberto Sassu authored
      commit 8cdc23a3 upstream.
      
      Show the '^' character when a policy rule has flag IMA_INMASK.
      
      Fixes: 80eae209 ("IMA: allow reading back the current IMA policy")
      Signed-off-by: default avatarRoberto Sassu <roberto.sassu@huawei.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarMimi Zohar <zohar@linux.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2164f6c
    • Petr Vorel's avatar
      ima: fix wrong signed policy requirement when not appraising · 407eb63f
      Petr Vorel authored
      commit f4001947 upstream.
      
      Kernel booted just with ima_policy=tcb (not with
      ima_policy=appraise_tcb) shouldn't require signed policy.
      
      Regression found with LTP test ima_policy.sh.
      
      Fixes: c52657d9 ("ima: refactor ima_init_policy()")
      Cc: stable@vger.kernel.org  (linux-5.0)
      Signed-off-by: default avatarPetr Vorel <pvorel@suse.cz>
      Signed-off-by: default avatarMimi Zohar <zohar@linux.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      407eb63f
    • Scott Wood's avatar
      x86/ima: Check EFI_RUNTIME_SERVICES before using · c59e2a64
      Scott Wood authored
      commit 558b523d upstream.
      
      Checking efi_enabled(EFI_BOOT) is not sufficient to ensure that
      EFI runtime services are available, e.g. if efi=noruntime is used.
      
      Without this, I get an oops on a PREEMPT_RT kernel where efi=noruntime is
      the default.
      
      Fixes: 399574c6 ("x86/ima: retry detecting secure boot mode")
      Cc: stable@vger.kernel.org  (linux-5.0)
      Signed-off-by: default avatarScott Wood <swood@redhat.com>
      Signed-off-by: default avatarMimi Zohar <zohar@linux.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c59e2a64
    • Jonathan Corbet's avatar
      doc: Cope with Sphinx logging deprecations · bd411a62
      Jonathan Corbet authored
      commit 096ea522 upstream.
      
      Recent versions of sphinx will emit messages like:
      
        Documentation/sphinx/kerneldoc.py:103:
           RemovedInSphinx20Warning: app.warning() is now deprecated.
           Use sphinx.util.logging instead.
      
      Switch to sphinx.util.logging to make this unsightly message go away.
      Alas, that interface was only added in version 1.6, so we have to add a
      version check to keep things working with older sphinxes.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      bd411a62
    • Jonathan Corbet's avatar
      doc: Cope with the deprecation of AutoReporter · 32a4c9e0
      Jonathan Corbet authored
      commit 2404dad1 upstream.
      
      AutoReporter is going away; recent versions of sphinx emit a warning like:
      
        Documentation/sphinx/kerneldoc.py:125:
            RemovedInSphinx20Warning: AutodocReporter is now deprecated.
            Use sphinx.util.docutils.switch_source_input() instead.
      
      Make the switch.  But switch_source_input() only showed up in 1.7, so we
      have to do ugly version checks to keep things working in older versions.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      32a4c9e0
    • Jonathan Corbet's avatar
      docs: Fix conf.py for Sphinx 2.0 · d6fe20f2
      Jonathan Corbet authored
      commit 3bc80884 upstream.
      
      Our version check in Documentation/conf.py never envisioned a world where
      Sphinx moved beyond 1.x.  Now that the unthinkable has happened, fix our
      version check to handle higher version numbers correctly.
      
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJonathan Corbet <corbet@lwn.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d6fe20f2
    • Catalin Marinas's avatar
      arm64: Fix the arm64_personality() syscall wrapper redirection · ff6503c8
      Catalin Marinas authored
      commit 00377277 upstream.
      
      Following commit 4378a7d4 ("arm64: implement syscall wrappers"), the
      syscall function names gained the '__arm64_' prefix. Ensure that we
      have the correct #define for redirecting a default syscall through a
      wrapper.
      
      Fixes: 4378a7d4 ("arm64: implement syscall wrappers")
      Cc: <stable@vger.kernel.org> # 4.19.x-
      Acked-by: default avatarMark Rutland <mark.rutland@arm.com>
      Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ff6503c8
    • Suzuki K Poulose's avatar
      mm, compaction: make sure we isolate a valid PFN · 6b036c70
      Suzuki K Poulose authored
      commit e577c8b6 upstream.
      
      When we have holes in a normal memory zone, we could endup having
      cached_migrate_pfns which may not necessarily be valid, under heavy memory
      pressure with swapping enabled ( via __reset_isolation_suitable(),
      triggered by kswapd).
      
      Later if we fail to find a page via fast_isolate_freepages(), we may end
      up using the migrate_pfn we started the search with, as valid page.  This
      could lead to accessing NULL pointer derefernces like below, due to an
      invalid mem_section pointer.
      
      Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [47/1825]
       Mem abort info:
         ESR = 0x96000004
         Exception class = DABT (current EL), IL = 32 bits
         SET = 0, FnV = 0
         EA = 0, S1PTW = 0
       Data abort info:
         ISV = 0, ISS = 0x00000004
         CM = 0, WnR = 0
       user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000082f94ae9
       [0000000000000008] pgd=0000000000000000
       Internal error: Oops: 96000004 [#1] SMP
       ...
       CPU: 10 PID: 6080 Comm: qemu-system-aar Not tainted 510-rc1+ #6
       Hardware name: AmpereComputing(R) OSPREY EV-883832-X3-0001/OSPREY, BIOS 4819 09/25/2018
       pstate: 60000005 (nZCv daif -PAN -UAO)
       pc : set_pfnblock_flags_mask+0x58/0xe8
       lr : compaction_alloc+0x300/0x950
       [...]
       Process qemu-system-aar (pid: 6080, stack limit = 0x0000000095070da5)
       Call trace:
        set_pfnblock_flags_mask+0x58/0xe8
        compaction_alloc+0x300/0x950
        migrate_pages+0x1a4/0xbb0
        compact_zone+0x750/0xde8
        compact_zone_order+0xd8/0x118
        try_to_compact_pages+0xb4/0x290
        __alloc_pages_direct_compact+0x84/0x1e0
        __alloc_pages_nodemask+0x5e0/0xe18
        alloc_pages_vma+0x1cc/0x210
        do_huge_pmd_anonymous_page+0x108/0x7c8
        __handle_mm_fault+0xdd4/0x1190
        handle_mm_fault+0x114/0x1c0
        __get_user_pages+0x198/0x3c0
        get_user_pages_unlocked+0xb4/0x1d8
        __gfn_to_pfn_memslot+0x12c/0x3b8
        gfn_to_pfn_prot+0x4c/0x60
        kvm_handle_guest_abort+0x4b0/0xcd8
        handle_exit+0x140/0x1b8
        kvm_arch_vcpu_ioctl_run+0x260/0x768
        kvm_vcpu_ioctl+0x490/0x898
        do_vfs_ioctl+0xc4/0x898
        ksys_ioctl+0x8c/0xa0
        __arm64_sys_ioctl+0x28/0x38
        el0_svc_common+0x74/0x118
        el0_svc_handler+0x38/0x78
        el0_svc+0x8/0xc
       Code: f8607840 f100001f 8b011401 9a801020 (f9400400)
       ---[ end trace af6a35219325a9b6 ]---
      
      The issue was reported on an arm64 server with 128GB with holes in the
      zone (e.g, [32GB@4GB, 96GB@544GB]), with a swap device enabled, while
      running 100 KVM guest instances.
      
      This patch fixes the issue by ensuring that the page belongs to a valid
      PFN when we fallback to using the lower limit of the scan range upon
      failure in fast_isolate_freepages().
      
      Link: http://lkml.kernel.org/r/1558711908-15688-1-git-send-email-suzuki.poulose@arm.com
      Fixes: 5a811889 ("mm, compaction: use free lists to quickly locate a migration target")
      Signed-off-by: default avatarSuzuki K Poulose <suzuki.poulose@arm.com>
      Reported-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
      Reviewed-by: default avatarMel Gorman <mgorman@techsingularity.net>
      Reviewed-by: default avatarAnshuman Khandual <anshuman.khandual@arm.com>
      Cc: Michal Hocko <mhocko@suse.com>
      Cc: Qian Cai <cai@lca.pw>
      Cc: Marc Zyngier <marc.zyngier@arm.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6b036c70
    • Eric W. Biederman's avatar
      signal/arm64: Use force_sig not force_sig_fault for SIGKILL · 013d8fcb
      Eric W. Biederman authored
      commit d76cac67 upstream.
      
      I don't think this is userspace visible but SIGKILL does not have
      any si_codes that use the fault member of the siginfo union.  Correct
      this the simple way and call force_sig instead of force_sig_fault when
      the signal is SIGKILL.
      
      The two know places where synchronous SIGKILL are generated are
      do_bad_area and fpsimd_save.  The call paths to force_sig_fault are:
      do_bad_area
        arm64_force_sig_fault
          force_sig_fault
      force_signal_inject
        arm64_notify_die
          arm64_force_sig_fault
             force_sig_fault
      
      Which means correcting this in arm64_force_sig_fault is enough
      to ensure the arm64 code is not misusing the generic code, which
      could lead to maintenance problems later.
      
      Cc: stable@vger.kernel.org
      Cc: Dave Martin <Dave.Martin@arm.com>
      Cc: James Morse <james.morse@arm.com>
      Cc: Will Deacon <will.deacon@arm.com>
      Fixes: af40ff68 ("arm64: signal: Ensure si_code is valid for all fault signals")
      Signed-off-by: default avatar"Eric W. Biederman" <ebiederm@xmission.com>
      Signed-off-by: default avatarWill Deacon <will.deacon@arm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      013d8fcb
    • Zhenliang Wei's avatar
      kernel/signal.c: trace_signal_deliver when signal_group_exit · 02ea8867
      Zhenliang Wei authored
      commit 98af37d6 upstream.
      
      In the fixes commit, removing SIGKILL from each thread signal mask and
      executing "goto fatal" directly will skip the call to
      "trace_signal_deliver".  At this point, the delivery tracking of the
      SIGKILL signal will be inaccurate.
      
      Therefore, we need to add trace_signal_deliver before "goto fatal" after
      executing sigdelset.
      
      Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.
      
      Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
      Fixes: cf43a757 ("signal: Restore the stop PTRACE_EVENT_EXIT")
      Signed-off-by: default avatarZhenliang Wei <weizhenliang@huawei.com>
      Reviewed-by: default avatarChristian Brauner <christian@brauner.io>
      Reviewed-by: default avatarOleg Nesterov <oleg@redhat.com>
      Cc: Eric W. Biederman <ebiederm@xmission.com>
      Cc: Ivan Delalande <colona@arista.com>
      Cc: Arnd Bergmann <arnd@arndb.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Deepa Dinamani <deepa.kernel@gmail.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      02ea8867
    • Nathan Chancellor's avatar
      kasan: initialize tag to 0xff in __kasan_kmalloc · 2257b040
      Nathan Chancellor authored
      commit 0600597c upstream.
      
      When building with -Wuninitialized and CONFIG_KASAN_SW_TAGS unset, Clang
      warns:
      
      mm/kasan/common.c:484:40: warning: variable 'tag' is uninitialized when
      used here [-Wuninitialized]
              kasan_unpoison_shadow(set_tag(object, tag), size);
                                                    ^~~
      
      set_tag ignores tag in this configuration but clang doesn't realize it at
      this point in its pipeline, as it points to arch_kasan_set_tag as being
      the point where it is used, which will later be expanded to (void
      *)(object) without a use of tag.  Initialize tag to 0xff, as it removes
      this warning and doesn't change the meaning of the code.
      
      Link: https://github.com/ClangBuiltLinux/linux/issues/465
      Link: http://lkml.kernel.org/r/20190502163057.6603-1-natechancellor@gmail.com
      Fixes: 7f94ffbc ("kasan: add hooks implementation for tag-based mode")
      Signed-off-by: default avatarNathan Chancellor <natechancellor@gmail.com>
      Reviewed-by: default avatarAndrey Konovalov <andreyknvl@google.com>
      Reviewed-by: default avatarAndrey Ryabinin <aryabinin@virtuozzo.com>
      Cc: Alexander Potapenko <glider@google.com>
      Cc: Dmitry Vyukov <dvyukov@google.com>
      Cc: Nick Desaulniers <ndesaulniers@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2257b040
    • Jiri Slaby's avatar
      memcg: make it work on sparse non-0-node systems · 77036834
      Jiri Slaby authored
      commit 3e858996 upstream.
      
      We have a single node system with node 0 disabled:
        Scanning NUMA topology in Northbridge 24
        Number of physical nodes 2
        Skipping disabled node 0
        Node 1 MemBase 0000000000000000 Limit 00000000fbff0000
        NODE_DATA(1) allocated [mem 0xfbfda000-0xfbfeffff]
      
      This causes crashes in memcg when system boots:
        BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
        #PF error: [normal kernel read fault]
      ...
        RIP: 0010:list_lru_add+0x94/0x170
      ...
        Call Trace:
         d_lru_add+0x44/0x50
         dput.part.34+0xfc/0x110
         __fput+0x108/0x230
         task_work_run+0x9f/0xc0
         exit_to_usermode_loop+0xf5/0x100
      
      It is reproducible as far as 4.12.  I did not try older kernels.  You have
      to have a new enough systemd, e.g.  241 (the reason is unknown -- was not
      investigated).  Cannot be reproduced with systemd 234.
      
      The system crashes because the size of lru array is never updated in
      memcg_update_all_list_lrus and the reads are past the zero-sized array,
      causing dereferences of random memory.
      
      The root cause are list_lru_memcg_aware checks in the list_lru code.  The
      test in list_lru_memcg_aware is broken: it assumes node 0 is always
      present, but it is not true on some systems as can be seen above.
      
      So fix this by avoiding checks on node 0.  Remember the memcg-awareness by
      a bool flag in struct list_lru.
      
      Link: http://lkml.kernel.org/r/20190522091940.3615-1-jslaby@suse.cz
      Fixes: 60d3fd32 ("list_lru: introduce per-memcg lists")
      Signed-off-by: default avatarJiri Slaby <jslaby@suse.cz>
      Acked-by: default avatarMichal Hocko <mhocko@suse.com>
      Suggested-by: default avatarVladimir Davydov <vdavydov.dev@gmail.com>
      Acked-by: default avatarVladimir Davydov <vdavydov.dev@gmail.com>
      Reviewed-by: default avatarShakeel Butt <shakeelb@google.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      77036834
    • Chris Down's avatar
      mm, memcg: consider subtrees in memory.events · f9610998
      Chris Down authored
      commit 9852ae3f upstream.
      
      memory.stat and other files already consider subtrees in their output, and
      we should too in order to not present an inconsistent interface.
      
      The current situation is fairly confusing, because people interacting with
      cgroups expect hierarchical behaviour in the vein of memory.stat,
      cgroup.events, and other files.  For example, this causes confusion when
      debugging reclaim events under low, as currently these always read "0" at
      non-leaf memcg nodes, which frequently causes people to misdiagnose breach
      behaviour.  The same confusion applies to other counters in this file when
      debugging issues.
      
      Aggregation is done at write time instead of at read-time since these
      counters aren't hot (unlike memory.stat which is per-page, so it does it
      at read time), and it makes sense to bundle this with the file
      notifications.
      
      After this patch, events are propagated up the hierarchy:
      
          [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
          low 0
          high 0
          max 0
          oom 0
          oom_kill 0
          [root@ktst ~]# systemd-run -p MemoryMax=1 true
          Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service
          [root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
          low 0
          high 0
          max 7
          oom 1
          oom_kill 1
      
      As this is a change in behaviour, this can be reverted to the old
      behaviour by mounting with the `memory_localevents' flag set.  However, we
      use the new behaviour by default as there's a lack of evidence that there
      are any current users of memory.events that would find this change
      undesirable.
      
      akpm: this is a behaviour change, so Cc:stable.  THis is so that
      forthcoming distros which use cgroup v2 are more likely to pick up the
      revised behaviour.
      
      Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.nameSigned-off-by: default avatarChris Down <chris@chrisdown.name>
      Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reviewed-by: default avatarShakeel Butt <shakeelb@google.com>
      Cc: Michal Hocko <mhocko@kernel.org>
      Cc: Tejun Heo <tj@kernel.org>
      Cc: Roman Gushchin <guro@fb.com>
      Cc: Dennis Zhou <dennis@kernel.org>
      Cc: Suren Baghdasaryan <surenb@google.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f9610998
    • Joe Burmeister's avatar
      tty: max310x: Fix external crystal register setup · 15ff2c6a
      Joe Burmeister authored
      commit 5d24f455 upstream.
      
      The datasheet states:
      
        Bit 4: ClockEnSet the ClockEn bit high to enable an external clocking
      (crystal or clock generator at XIN). Set the ClockEn bit to 0 to disable
      clocking
        Bit 1: CrystalEnSet the CrystalEn bit high to enable the crystal
      oscillator. When using an external clock source at XIN, CrystalEn must
      be set low.
      
      The bit 4, MAX310X_CLKSRC_EXTCLK_BIT, should be set and was not.
      
      This was required to make the MAX3107 with an external crystal on our
      board able to send or receive data.
      Signed-off-by: default avatarJoe Burmeister <joe.burmeister@devtank.co.uk>
      Cc: stable <stable@vger.kernel.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      15ff2c6a
    • Jorge Ramirez-Ortiz's avatar
      tty: serial: msm_serial: Fix XON/XOFF · 5f436d8d
      Jorge Ramirez-Ortiz authored
      commit 61c0e379 upstream.
      
      When the tty layer requests the uart to throttle, the current code
      executing in msm_serial will trigger "Bad mode in Error Handler" and
      generate an invalid stack frame in pstore before rebooting (that is if
      pstore is indeed configured: otherwise the user shall just notice a
      reboot with no further information dumped to the console).
      
      This patch replaces the PIO byte accessor with the word accessor
      already used in PIO mode.
      
      Fixes: 68252424 ("tty: serial: msm: Support big-endian CPUs")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarJorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
      Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
      Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      5f436d8d
    • Masahisa Kojima's avatar
      i2c: synquacer: fix synquacer_i2c_doxfer() return value · 38338dca
      Masahisa Kojima authored
      commit ff937890 upstream.
      
      master_xfer should return the number of messages successfully
      processed.
      
      Fixes: 0d676a6c ("i2c: add support for Socionext SynQuacer I2C controller")
      Cc: <stable@vger.kernel.org> # v4.19+
      Signed-off-by: default avatarOkamoto Satoru <okamoto.satoru@socionext.com>
      Signed-off-by: default avatarMasahisa Kojima <masahisa.kojima@linaro.org>
      Acked-by: default avatarArd Biesheuvel <ard.biesheuvel@linaro.org>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      38338dca
    • Vadim Pasternak's avatar
      i2c: mlxcpld: Fix wrong initialization order in probe · 1d7920d3
      Vadim Pasternak authored
      commit 13067ef7 upstream.
      
      Fix wrong order in probing routine initialization - field `base_addr'
      is used before it's initialized. Move assignment of 'priv->base_addr`
      to the beginning, prior the call to mlxcpld_i2c_read_comm().
      Wrong order caused the first read of capability register to be executed
      at wrong offset 0x0 instead of 0x2000. By chance it was a "good
      garbage" at 0x0 offset.
      
      Fixes: 313ce648 ("i2c: mlxcpld: Add support for extended transaction length for i2c-mlxcpld")
      Signed-off-by: default avatarVadim Pasternak <vadimp@mellanox.com>
      Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
      Cc: stable@kernel.org
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1d7920d3
    • Lyude Paul's avatar
      drm/nouveau/i2c: Disable i2c bus access after ->fini() · cd68344b
      Lyude Paul authored
      commit 342406e4 upstream.
      
      For a while, we've had the problem of i2c bus access not grabbing
      a runtime PM ref when it's being used in userspace by i2c-dev, resulting
      in nouveau spamming the kernel log with errors if anything attempts to
      access the i2c bus while the GPU is in runtime suspend. An example:
      
      [  130.078386] nouveau 0000:01:00.0: i2c: aux 000d: begin idle timeout ffffffff
      
      Since the GPU is in runtime suspend, the MMIO region that the i2c bus is
      on isn't accessible. On x86, the standard behavior for accessing an
      unavailable MMIO region is to just return ~0.
      
      Except, that turned out to be a lie. While computers with a clean
      concious will return ~0 in this scenario, some machines will actually
      completely hang a CPU on certian bad MMIO accesses. This was witnessed
      with someone's Lenovo ThinkPad P50, where sensors-detect attempting to
      access the i2c bus while the GPU was suspended would result in a CPU
      hang:
      
        CPU: 5 PID: 12438 Comm: sensors-detect Not tainted 5.0.0-0.rc4.git3.1.fc30.x86_64 #1
        Hardware name: LENOVO 20EQS64N17/20EQS64N17, BIOS N1EET74W (1.47 ) 11/21/2017
        RIP: 0010:ioread32+0x2b/0x30
        Code: 81 ff ff ff 03 00 77 20 48 81 ff 00 00 01 00 76 05 0f b7 d7 ed c3
        48 c7 c6 e1 0c 36 96 e8 2d ff ff ff b8 ff ff ff ff c3 8b 07 <c3> 0f 1f
        40 00 49 89 f0 48 81 fe ff ff 03 00 76 04 40 88 3e c3 48
        RSP: 0018:ffffaac3c5007b48 EFLAGS: 00000292 ORIG_RAX: ffffffffffffff13
        RAX: 0000000001111000 RBX: 0000000001111000 RCX: 0000043017a97186
        RDX: 0000000000000aaa RSI: 0000000000000005 RDI: ffffaac3c400e4e4
        RBP: ffff9e6443902c00 R08: ffffaac3c400e4e4 R09: ffffaac3c5007be7
        R10: 0000000000000004 R11: 0000000000000001 R12: ffff9e6445dd0000
        R13: 000000000000e4e4 R14: 00000000000003c4 R15: 0000000000000000
        FS:  00007f253155a740(0000) GS:ffff9e644f600000(0000) knlGS:0000000000000000
        CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
        CR2: 00005630d1500358 CR3: 0000000417c44006 CR4: 00000000003606e0
        DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
        DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
        Call Trace:
         g94_i2c_aux_xfer+0x326/0x850 [nouveau]
         nvkm_i2c_aux_i2c_xfer+0x9e/0x140 [nouveau]
         __i2c_transfer+0x14b/0x620
         i2c_smbus_xfer_emulated+0x159/0x680
         ? _raw_spin_unlock_irqrestore+0x1/0x60
         ? rt_mutex_slowlock.constprop.0+0x13d/0x1e0
         ? __lock_is_held+0x59/0xa0
         __i2c_smbus_xfer+0x138/0x5a0
         i2c_smbus_xfer+0x4f/0x80
         i2cdev_ioctl_smbus+0x162/0x2d0 [i2c_dev]
         i2cdev_ioctl+0x1db/0x2c0 [i2c_dev]
         do_vfs_ioctl+0x408/0x750
         ksys_ioctl+0x5e/0x90
         __x64_sys_ioctl+0x16/0x20
         do_syscall_64+0x60/0x1e0
         entry_SYSCALL_64_after_hwframe+0x49/0xbe
        RIP: 0033:0x7f25317f546b
        Code: 0f 1e fa 48 8b 05 1d da 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
        ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
        f0 ff ff 73 01 c3 48 8b 0d ed d9 0c 00 f7 d8 64 89 01 48
        RSP: 002b:00007ffc88caab68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
        RAX: ffffffffffffffda RBX: 00005630d0fe7260 RCX: 00007f25317f546b
        RDX: 00005630d1598e80 RSI: 0000000000000720 RDI: 0000000000000003
        RBP: 00005630d155b968 R08: 0000000000000001 R09: 00005630d15a1da0
        R10: 0000000000000070 R11: 0000000000000246 R12: 00005630d1598e80
        R13: 00005630d12f3d28 R14: 0000000000000720 R15: 00005630d12f3ce0
        watchdog: BUG: soft lockup - CPU#5 stuck for 23s! [sensors-detect:12438]
      
      Yikes! While I wanted to try to make it so that accessing an i2c bus on
      nouveau would wake up the GPU as needed, airlied pointed out that pretty
      much any usecase for userspace accessing an i2c bus on a GPU (mainly for
      the DDC brightness control that some displays have) is going to only be
      useful while there's at least one display enabled on the GPU anyway, and
      the GPU never sleeps while there's displays running.
      
      Since teaching the i2c bus to wake up the GPU on userspace accesses is a
      good deal more difficult than it might seem, mostly due to the fact that
      we have to use the i2c bus during runtime resume of the GPU, we instead
      opt for the easiest solution: don't let userspace access i2c busses on
      the GPU at all while it's in runtime suspend.
      
      Changes since v1:
      * Also disable i2c busses that run over DP AUX
      Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarBen Skeggs <bskeggs@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cd68344b
    • Thomas Huth's avatar
      KVM: s390: Do not report unusabled IDs via KVM_CAP_MAX_VCPU_ID · 1f41c93a
      Thomas Huth authored
      commit a86cb413 upstream.
      
      KVM_CAP_MAX_VCPU_ID is currently always reporting KVM_MAX_VCPU_ID on all
      architectures. However, on s390x, the amount of usable CPUs is determined
      during runtime - it is depending on the features of the machine the code
      is running on. Since we are using the vcpu_id as an index into the SCA
      structures that are defined by the hardware (see e.g. the sca_add_vcpu()
      function), it is not only the amount of CPUs that is limited by the hard-
      ware, but also the range of IDs that we can use.
      Thus KVM_CAP_MAX_VCPU_ID must be determined during runtime on s390x, too.
      So the handling of KVM_CAP_MAX_VCPU_ID has to be moved from the common
      code into the architecture specific code, and on s390x we have to return
      the same value here as for KVM_CAP_MAX_VCPUS.
      This problem has been discovered with the kvm_create_max_vcpus selftest.
      With this change applied, the selftest now passes on s390x, too.
      Reviewed-by: default avatarAndrew Jones <drjones@redhat.com>
      Reviewed-by: default avatarCornelia Huck <cohuck@redhat.com>
      Reviewed-by: default avatarDavid Hildenbrand <david@redhat.com>
      Signed-off-by: default avatarThomas Huth <thuth@redhat.com>
      Message-Id: <20190523164309.13345-9-thuth@redhat.com>
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      1f41c93a
    • Hui Wang's avatar
      ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops · 8f3b8eea
      Hui Wang authored
      commit 9cb40eb1 upstream.
      
      We met another Acer Aspire laptop which has the problem on the
      headset-mic, the Pin 0x19 is not set the corret configuration for a
      mic and the pin presence can't be detected too after plugging a
      headset. Kailang suggested that we should set the coeff to enable the
      mic and apply the ALC269_FIXUP_LIFEBOOK_EXTMIC. After doing that,
      both headset-mic presence and headset-mic work well.
      
      The existing ALC255_FIXUP_ACER_MIC_NO_PRESENCE set the headset-mic
      jack to be a phantom jack. Now since the jack can support presence
      unsol event, let us imporve it to set the jack to be a normal jack.
      
      https://bugs.launchpad.net/bugs/1821269
      Fixes: 5824ce8d ("ALSA: hda/realtek - Add support for Acer Aspire E5-475 headset mic")
      Cc: Chris Chiu <chiu@endlessm.com>
      CC: Daniel Drake <drake@endlessm.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarKailang Yang <kailang@realtek.com>
      Signed-off-by: default avatarHui Wang <hui.wang@canonical.com>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8f3b8eea
    • Kailang Yang's avatar
      ALSA: hda/realtek - Set default power save node to 0 · 0031bae9
      Kailang Yang authored
      commit 317d9313 upstream.
      
      I measured power consumption between power_save_node=1 and power_save_node=0.
      It's almost the same.
      Codec will enter to runtime suspend and suspend.
      That pin also will enter to D3. Don't need to enter to D3 by single pin.
      So, Disable power_save_node as default. It will avoid more issues.
      Windows Driver also has not this option at runtime PM.
      Signed-off-by: default avatarKailang Yang <kailang@realtek.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0031bae9
    • Takashi Iwai's avatar
      ALSA: line6: Assure canceling delayed work at disconnection · cf02204f
      Takashi Iwai authored
      commit 0b074ab7 upstream.
      
      The current code performs the cancel of a delayed work at the late
      stage of disconnection procedure, which may lead to the access to the
      already cleared state.
      
      This patch assures to call cancel_delayed_work_sync() at the beginning
      of the disconnection procedure for avoiding that race.  The delayed
      work object is now assigned in the common line6 object instead of its
      derivative, so that we can call cancel_delayed_work_sync().
      
      Along with the change, the startup function is called via the new
      callback instead.  This will make it easier to port other LINE6
      drivers to use the delayed work for startup in later patches.
      
      Reported-by: syzbot+5255458d5e0a2b10bbb9@syzkaller.appspotmail.com
      Fixes: 7f84ff68 ("ALSA: line6: toneport: Fix broken usage of timer for delayed execution")
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      cf02204f
    • Thiago Jung Bauermann's avatar
      powerpc/kexec: Fix loading of kernel + initramfs with kexec_file_load() · e1801d51
      Thiago Jung Bauermann authored
      commit 8b909e35 upstream.
      
      Commit b6664ba4 ("s390, kexec_file: drop arch_kexec_mem_walk()")
      changed kexec_add_buffer() to skip searching for a memory location if
      kexec_buf.mem is already set, and use the address that is there.
      
      In powerpc code we reuse a kexec_buf variable for loading both the
      kernel and the initramfs by resetting some of the fields between those
      uses, but not mem. This causes kexec_add_buffer() to try to load the
      kernel at the same address where initramfs will be loaded, which is
      naturally rejected:
      
        # kexec -s -l --initrd initramfs vmlinuz
        kexec_file_load failed: Invalid argument
      
      Setting the mem field before every call to kexec_add_buffer() fixes
      this regression.
      
      Fixes: b6664ba4 ("s390, kexec_file: drop arch_kexec_mem_walk()")
      Cc: stable@vger.kernel.org # v5.0+
      Signed-off-by: default avatarThiago Jung Bauermann <bauerman@linux.ibm.com>
      Reviewed-by: default avatarDave Young <dyoung@redhat.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e1801d51
    • Ravi Bangoria's avatar
      powerpc/perf: Fix MMCRA corruption by bhrb_filter · 72294049
      Ravi Bangoria authored
      commit 3202e35e upstream.
      
      Consider a scenario where user creates two events:
      
        1st event:
          attr.sample_type |= PERF_SAMPLE_BRANCH_STACK;
          attr.branch_sample_type = PERF_SAMPLE_BRANCH_ANY;
          fd = perf_event_open(attr, 0, 1, -1, 0);
      
        This sets cpuhw->bhrb_filter to 0 and returns valid fd.
      
        2nd event:
          attr.sample_type |= PERF_SAMPLE_BRANCH_STACK;
          attr.branch_sample_type = PERF_SAMPLE_BRANCH_CALL;
          fd = perf_event_open(attr, 0, 1, -1, 0);
      
        It overrides cpuhw->bhrb_filter to -1 and returns with error.
      
      Now if power_pmu_enable() gets called by any path other than
      power_pmu_add(), ppmu->config_bhrb(-1) will set MMCRA to -1.
      
      Fixes: 3925f46b ("powerpc/perf: Enable branch stack sampling framework")
      Cc: stable@vger.kernel.org # v3.10+
      Signed-off-by: default avatarRavi Bangoria <ravi.bangoria@linux.ibm.com>
      Reviewed-by: default avatarMadhavan Srinivasan <maddy@linux.vnet.ibm.com>
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      72294049
    • Suraj Jitindar Singh's avatar
      KVM: PPC: Book3S HV: Restore SPRG3 in kvmhv_p9_guest_entry() · effe3c9c
      Suraj Jitindar Singh authored
      commit d724c9e5 upstream.
      
      The sprgs are a set of 4 general purpose sprs provided for software use.
      SPRG3 is special in that it can also be read from userspace. Thus it is
      used on linux to store the cpu and numa id of the process to speed up
      syscall access to this information.
      
      This register is overwritten with the guest value on kvm guest entry,
      and so needs to be restored on exit again. Thus restore the value on
      the guest exit path in kvmhv_p9_guest_entry().
      
      Cc: stable@vger.kernel.org # v4.20+
      Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
      Signed-off-by: default avatarSuraj Jitindar Singh <sjitindarsingh@gmail.com>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      effe3c9c
    • Paul Mackerras's avatar
      KVM: PPC: Book3S HV: Fix lockdep warning when entering guest on POWER9 · b297e5b0
      Paul Mackerras authored
      commit 1b28d553 upstream.
      
      Commit 3309bec8 ("KVM: PPC: Book3S HV: Fix lockdep warning when
      entering the guest") moved calls to trace_hardirqs_{on,off} in the
      entry path used for HPT guests.  Similar code exists in the new
      streamlined entry path used for radix guests on POWER9.  This makes
      the same change there, so as to avoid lockdep warnings such as this:
      
      [  228.686461] DEBUG_LOCKS_WARN_ON(current->hardirqs_enabled)
      [  228.686480] WARNING: CPU: 116 PID: 3803 at ../kernel/locking/lockdep.c:4219 check_flags.part.23+0x21c/0x270
      [  228.686544] Modules linked in: vhost_net vhost xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat
      +xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter
      +ebtables ip6table_filter ip6_tables iptable_filter fuse kvm_hv kvm at24 ipmi_powernv regmap_i2c ipmi_devintf
      +uio_pdrv_genirq ofpart ipmi_msghandler uio powernv_flash mtd ibmpowernv opal_prd ip_tables ext4 mbcache jbd2 btrfs
      +zstd_decompress zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor
      +raid6_pq raid1 raid0 ses sd_mod enclosure scsi_transport_sas ast i2c_opal i2c_algo_bit drm_kms_helper syscopyarea
      +sysfillrect sysimgblt fb_sys_fops ttm drm i40e e1000e cxl aacraid tg3 drm_panel_orientation_quirks i2c_core
      [  228.686859] CPU: 116 PID: 3803 Comm: qemu-system-ppc Kdump: loaded Not tainted 5.2.0-rc1-xive+ #42
      [  228.686911] NIP:  c0000000001b394c LR: c0000000001b3948 CTR: c000000000bfad20
      [  228.686963] REGS: c000200cdb50f570 TRAP: 0700   Not tainted  (5.2.0-rc1-xive+)
      [  228.687001] MSR:  9000000002823033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 48222222  XER: 20040000
      [  228.687060] CFAR: c000000000116db0 IRQMASK: 1
      [  228.687060] GPR00: c0000000001b3948 c000200cdb50f800 c0000000015e7600 000000000000002e
      [  228.687060] GPR04: 0000000000000001 c0000000001c71a0 000000006e655f73 72727563284e4f5f
      [  228.687060] GPR08: 0000200e60680000 0000000000000000 c000200cdb486180 0000000000000000
      [  228.687060] GPR12: 0000000000002000 c000200fff61a680 0000000000000000 00007fffb75c0000
      [  228.687060] GPR16: 0000000000000000 0000000000000000 c0000000017d6900 c000000001124900
      [  228.687060] GPR20: 0000000000000074 c008000006916f68 0000000000000074 0000000000000074
      [  228.687060] GPR24: ffffffffffffffff ffffffffffffffff 0000000000000003 c000200d4b600000
      [  228.687060] GPR28: c000000001627e58 c000000001489908 c000000001627e58 c000000002304de0
      [  228.687377] NIP [c0000000001b394c] check_flags.part.23+0x21c/0x270
      [  228.687415] LR [c0000000001b3948] check_flags.part.23+0x218/0x270
      [  228.687466] Call Trace:
      [  228.687488] [c000200cdb50f800] [c0000000001b3948] check_flags.part.23+0x218/0x270 (unreliable)
      [  228.687542] [c000200cdb50f870] [c0000000001b6548] lock_is_held_type+0x188/0x1c0
      [  228.687595] [c000200cdb50f8d0] [c0000000001d939c] rcu_read_lock_sched_held+0xdc/0x100
      [  228.687646] [c000200cdb50f900] [c0000000001dd704] rcu_note_context_switch+0x304/0x340
      [  228.687701] [c000200cdb50f940] [c0080000068fcc58] kvmhv_run_single_vcpu+0xdb0/0x1120 [kvm_hv]
      [  228.687756] [c000200cdb50fa20] [c0080000068fd5b0] kvmppc_vcpu_run_hv+0x5e8/0xe40 [kvm_hv]
      [  228.687816] [c000200cdb50faf0] [c0080000071797dc] kvmppc_vcpu_run+0x34/0x48 [kvm]
      [  228.687863] [c000200cdb50fb10] [c0080000071755dc] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
      [  228.687916] [c000200cdb50fba0] [c008000007165ccc] kvm_vcpu_ioctl+0x424/0x838 [kvm]
      [  228.687957] [c000200cdb50fd10] [c000000000433a24] do_vfs_ioctl+0xd4/0xcd0
      [  228.687995] [c000200cdb50fdb0] [c000000000434724] ksys_ioctl+0x104/0x120
      [  228.688033] [c000200cdb50fe00] [c000000000434768] sys_ioctl+0x28/0x80
      [  228.688072] [c000200cdb50fe20] [c00000000000b888] system_call+0x5c/0x70
      [  228.688109] Instruction dump:
      [  228.688142] 4bf6342d 60000000 0fe00000 e8010080 7c0803a6 4bfffe60 3c82ff87 3c62ff87
      [  228.688196] 388472d0 3863d738 4bf63405 60000000 <0fe00000> 4bffff4c 3c82ff87 3c62ff87
      [  228.688251] irq event stamp: 205
      [  228.688287] hardirqs last  enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv]
      [  228.688344] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv]
      [  228.688412] softirqs last  enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4
      [  228.688464] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210
      [  228.688513] ---[ end trace eb16f6260022a812 ]---
      [  228.688548] possible reason: unannotated irqs-off.
      [  228.688571] irq event stamp: 205
      [  228.688607] hardirqs last  enabled at (205): [<c0080000068fc1b4>] kvmhv_run_single_vcpu+0x30c/0x1120 [kvm_hv]
      [  228.688664] hardirqs last disabled at (204): [<c0080000068fbff0>] kvmhv_run_single_vcpu+0x148/0x1120 [kvm_hv]
      [  228.688719] softirqs last  enabled at (180): [<c000000000c0b2ac>] __do_softirq+0x4ac/0x5d4
      [  228.688758] softirqs last disabled at (169): [<c000000000122aa8>] irq_exit+0x1f8/0x210
      
      Cc: stable@vger.kernel.org # v4.20+
      Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      Reviewed-by: default avatarCédric Le Goater <clg@kaod.org>
      Tested-by: default avatarCédric Le Goater <clg@kaod.org>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b297e5b0
    • Cédric Le Goater's avatar
      KVM: PPC: Book3S HV: XIVE: Do not clear IRQ data of passthrough interrupts · b625c158
      Cédric Le Goater authored
      commit ef974020 upstream.
      
      The passthrough interrupts are defined at the host level and their IRQ
      data should not be cleared unless specifically deconfigured (shutdown)
      by the host. They differ from the IPI interrupts which are allocated
      by the XIVE KVM device and reserved to the guest usage only.
      
      This fixes a host crash when destroying a VM in which a PCI adapter
      was passed-through. In this case, the interrupt is cleared and freed
      by the KVM device and then shutdown by vfio at the host level.
      
      [ 1007.360265] BUG: Kernel NULL pointer dereference at 0x00000d00
      [ 1007.360285] Faulting instruction address: 0xc00000000009da34
      [ 1007.360296] Oops: Kernel access of bad area, sig: 7 [#1]
      [ 1007.360303] LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
      [ 1007.360314] Modules linked in: vhost_net vhost iptable_mangle ipt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc kvm_hv kvm xt_tcpudp iptable_filter squashfs fuse binfmt_misc vmx_crypto ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi nfsd ip_tables x_tables autofs4 btrfs zstd_decompress zstd_compress lzo_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq multipath mlx5_ib ib_uverbs ib_core crc32c_vpmsum mlx5_core
      [ 1007.360425] CPU: 9 PID: 15576 Comm: CPU 18/KVM Kdump: loaded Not tainted 5.1.0-gad7e7d0ef #4
      [ 1007.360454] NIP:  c00000000009da34 LR: c00000000009e50c CTR: c00000000009e5d0
      [ 1007.360482] REGS: c000007f24ccf330 TRAP: 0300   Not tainted  (5.1.0-gad7e7d0ef)
      [ 1007.360500] MSR:  900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE>  CR: 24002484  XER: 00000000
      [ 1007.360532] CFAR: c00000000009da10 DAR: 0000000000000d00 DSISR: 00080000 IRQMASK: 1
      [ 1007.360532] GPR00: c00000000009e62c c000007f24ccf5c0 c000000001510600 c000007fe7f947c0
      [ 1007.360532] GPR04: 0000000000000d00 0000000000000000 0000000000000000 c000005eff02d200
      [ 1007.360532] GPR08: 0000000000400000 0000000000000000 0000000000000000 fffffffffffffffd
      [ 1007.360532] GPR12: c00000000009e5d0 c000007fffff7b00 0000000000000031 000000012c345718
      [ 1007.360532] GPR16: 0000000000000000 0000000000000008 0000000000418004 0000000000040100
      [ 1007.360532] GPR20: 0000000000000000 0000000008430000 00000000003c0000 0000000000000027
      [ 1007.360532] GPR24: 00000000000000ff 0000000000000000 00000000000000ff c000007faa90d98c
      [ 1007.360532] GPR28: c000007faa90da40 00000000000fe040 ffffffffffffffff c000007fe7f947c0
      [ 1007.360689] NIP [c00000000009da34] xive_esb_read+0x34/0x120
      [ 1007.360706] LR [c00000000009e50c] xive_do_source_set_mask.part.0+0x2c/0x50
      [ 1007.360732] Call Trace:
      [ 1007.360738] [c000007f24ccf5c0] [c000000000a6383c] snooze_loop+0x15c/0x270 (unreliable)
      [ 1007.360775] [c000007f24ccf5f0] [c00000000009e62c] xive_irq_shutdown+0x5c/0xe0
      [ 1007.360795] [c000007f24ccf630] [c00000000019e4a0] irq_shutdown+0x60/0xe0
      [ 1007.360813] [c000007f24ccf660] [c000000000198c44] __free_irq+0x3a4/0x420
      [ 1007.360831] [c000007f24ccf700] [c000000000198dc8] free_irq+0x78/0xe0
      [ 1007.360849] [c000007f24ccf730] [c00000000096c5a8] vfio_msi_set_vector_signal+0xa8/0x350
      [ 1007.360878] [c000007f24ccf7f0] [c00000000096c938] vfio_msi_set_block+0xe8/0x1e0
      [ 1007.360899] [c000007f24ccf850] [c00000000096cae0] vfio_msi_disable+0xb0/0x110
      [ 1007.360912] [c000007f24ccf8a0] [c00000000096cd04] vfio_pci_set_msi_trigger+0x1c4/0x3d0
      [ 1007.360922] [c000007f24ccf910] [c00000000096d910] vfio_pci_set_irqs_ioctl+0xa0/0x170
      [ 1007.360941] [c000007f24ccf930] [c00000000096b400] vfio_pci_disable+0x80/0x5e0
      [ 1007.360963] [c000007f24ccfa10] [c00000000096b9bc] vfio_pci_release+0x5c/0x90
      [ 1007.360991] [c000007f24ccfa40] [c000000000963a9c] vfio_device_fops_release+0x3c/0x70
      [ 1007.361012] [c000007f24ccfa70] [c0000000003b5668] __fput+0xc8/0x2b0
      [ 1007.361040] [c000007f24ccfac0] [c0000000001409b0] task_work_run+0x140/0x1b0
      [ 1007.361059] [c000007f24ccfb20] [c000000000118f8c] do_exit+0x3ac/0xd00
      [ 1007.361076] [c000007f24ccfc00] [c0000000001199b0] do_group_exit+0x60/0x100
      [ 1007.361094] [c000007f24ccfc40] [c00000000012b514] get_signal+0x1a4/0x8f0
      [ 1007.361112] [c000007f24ccfd30] [c000000000021cc8] do_notify_resume+0x1a8/0x430
      [ 1007.361141] [c000007f24ccfe20] [c00000000000e444] ret_from_except_lite+0x70/0x74
      [ 1007.361159] Instruction dump:
      [ 1007.361175] 38422c00 e9230000 712a0004 41820010 548a2036 7d442378 78840020 71290020
      [ 1007.361194] 4082004c e9230010 7c892214 7c0004ac <e9240000> 0c090000 4c00012c 792a0022
      
      Cc: stable@vger.kernel.org # v4.12+
      Fixes: 5af50993 ("KVM: PPC: Book3S HV: Native usage of the XIVE interrupt controller")
      Signed-off-by: default avatarCédric Le Goater <clg@kaod.org>
      Signed-off-by: default avatarGreg Kurz <groug@kaod.org>
      Signed-off-by: default avatarPaul Mackerras <paulus@ozlabs.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b625c158