- 17 Sep, 2014 40 commits
-
-
Miao Xie authored
Direct IO splits the original bio to several sub-bios because of the limit of raid stripe, and the filesystem will wait for all sub-bios and then run final end io process. But it was very hard to implement the data repair when dio read failure happens, because at the final end io function, we didn't know which mirror the data was read from. So in order to implement the data repair, we have to move the file data check in the final end io function to the sub-bio end io function, in which we can get the mirror number of the device we access. This patch did this work as the first step of the direct io data repair implementation. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Chris Mason <clm@fb.com>
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
The current code would load checksum data for several times when we split a whole direct read io because of the limit of the raid stripe, it would make us search the csum tree for several times. In fact, it just wasted time, and made the contention of the csum tree root be more serious. This patch improves this problem by loading the data at once. Signed-off-by:
-
Miao Xie authored
rw_devices counter is often used to tune the profile when doing chunk allocation, so we should modify it under the chunk_mutex context to avoid getting wrong chunk profile. Signed-off-by:
-
Miao Xie authored
For a missing device, we don't know it belong to which fs before we read its fsid from the chunk tree. So we add them into the current fs device list at first. When we get its fsid, we should move them to their own fs device list. Signed-off-by:
-
Miao Xie authored
When we open a seed filesystem, if the degraded mount option is set, we continue to mount the fs if we don't find some devices in the seed filesystem. But we should stop mounting if other errors happen. Fix it Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
The problem is: Task0(device scan task) Task1(device replace task) scan_one_device() mutex_lock(&uuid_mutex) device = find_device() mutex_lock(&device_list_mutex) lock_chunk() rm_and_free_source_device unlock_chunk() mutex_unlock(&device_list_mutex) check device Destroying the target device if device replace fails also has the same problem. We fix this problem by locking uuid_mutex during destroying source device or target device, just like the device remove operation. It is a temporary solution, we can fix this problem and make the code more clear by atomic counter in the future. Signed-off-by:
-
Miao Xie authored
We can build a new filesystem based a seed filesystem, and we need clone the fs devices when we open the new filesystem. But someone might clear the seed flag of the seed filesystem, then mount that filesystem and remove some device. If we mount the new filesystem, we might access a device list which was being changed when we clone the fs devices. Fix it. Signed-off-by:
-
Miao Xie authored
There were several problems about chunk mutex usage: - Lock chunk mutex when updating metadata. It would cause the nested deadlock because updating metadata might need allocate new chunks that need acquire chunk mutex. We remove chunk mutex at this case, because b-tree lock and other lock mechanism can help us. - ABBA deadlock occured between device_list_mutex and chunk_mutex. When we update device status, we must acquire device_list_mutex at the beginning, and then we might get chunk_mutex during the device status update because we need allocate new chunks for metadata COW. But at most place, we acquire chunk_mutex at first and then acquire device list mutex. We need change the lock order. - Some place we needn't acquire chunk_mutex. For example we needn't get chunk_mutex when we free a empty seed fs_devices structure. Signed-off-by:
-
Miao Xie authored
When we get the fs information, we forgot to acquire the mutex of device list, it might cause the problem we might access a device that was removed. Fix it by acquiring the device list mutex. Signed-off-by:
-
Miao Xie authored
We didn't protect the system chunk array when we added a new system chunk into it, it would cause the array be corrupted if someone remove/add some system chunk into array at the same time. Fix it by chunk lock. Signed-off-by:
-
Miao Xie authored
->total_bytes,->disk_total_bytes,->bytes_used is protected by chunk lock when we change them, but sometimes we read them without any lock, and we might get unexpected value. We fix this problem like inode's i_size. Signed-off-by:
-
Miao Xie authored
We should update free_chunk_space in time when we allocate a new chunk, not when we deal with the pending device update and block group insertion, because we need the real free_chunk_space data to calculate the reserved space, if we don't update it in time, we would consider the disk space which has be allocated as free space, and would use it to do overcommit reservation. Fix it. Signed-off-by:
-
Miao Xie authored
We should update device->bytes_used in the lock context of chunk_mutex, or we would get wrong data. Signed-off-by:
-
Miao Xie authored
During removing a device, we have modified free_chunk_space when we shrink the device, so we needn't assign a new value to it after the device shrink. Fix it. Signed-off-by:
-
Miao Xie authored
device->bytes_used will be changed when allocating a new chunk, and disk_total_size will be changed if resizing is successful. Meanwhile, the on-disk super blocks of the previous transaction might not be updated. Considering the consistency of the metadata in the previous transaction, We should use the size in the previous transaction to check if the super block is beyond the boundary of the device. Though it is not big problem because we don't use it now, but anyway it is better that we make it be consistent with the common metadata, maybe we will use it in the future. Signed-off-by:
-
Miao Xie authored
total_size will be changed when resizing a device, and disk_total_size will be changed if resizing is successful. Meanwhile, the on-disk super blocks of the previous transaction might not be updated. Considering the consistency of the metadata in the previous transaction, We should use the size in the previous transaction to check if the super block is beyond the boundary of the device. Fix it. Signed-off-by:
-
Miao Xie authored
We didn't protect the assignment of the target device, it might cause the problem that the super block update was skipped because we might find wrong size of the target device during the assignment. Fix it by moving the assignment sentences into the initialization function of the target device. And there is another merit that we can check if the target device is suitable more early. Signed-off-by:
-
Miao Xie authored
Signed-off-by:
-
Miao Xie authored
The member variants - num_can_discard - of fs_devices structure are set, but no one use them to do anything. so remove them. Signed-off-by:
-
Li RongQing authored
This comments became wrong after c3c532[bdi: add helper function for doing init and register of a bdi for a file system], so remove them. Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
-
Filipe Manana authored
When replaying a directory from the fsync log, if a directory entry exists both in the fs/subvol tree and in the log, the directory's inode got its i_size updated incorrectly, accounting for the dentry's name twice. Reproducer, from a test for xfstests: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey touch $SCRATCH_MNT/foo sync touch $SCRATCH_MNT/bar xfs_io -c "fsync" $SCRATCH_MNT xfs_io -c "fsync" $SCRATCH_MNT/bar _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey [ -f $SCRATCH_MNT/foo ] || echo "file foo is missing" [ -f $SCRATCH_MNT/bar ] || echo "file bar is missing" _unmount_flakey _check_scratch_fs $FLAKEY_DEV The filesystem check at the end failed with the message: "root 5 root dir 256 error". A test case for xfstests follows. Signed-off-by:Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
Liu Bo authored
One of my tests shows that when we really don't have space to reclaim via flush_space and also run out of space, this async reclaim work loops on adding itself into the workqueue and keeps writing something to disk according to iostat's results, and these writes mainly comes from commit_transaction which writes super_block. This's unacceptable as it can be bad to disks, especially memeory storages. This adds a check to avoid the above situation. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Josef Bacik authored
We have been iterating all references for each extent we have in a file when we do fiemap to see if it is shared. This is fine when you have a few clones or a few snapshots, but when you have 5k snapshots suddenly fiemap just sits there and stares at you. So add btrfs_check_shared which will use the backref walking code but will short circuit as soon as it finds a root or inode that doesn't match the one we currently have. This makes fiemap on my testbox go from looking at me blankly for a day to spitting out actual output in a reasonable amount of time. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
-
Filipe Manana authored
The behaviour of a 'chattr -c' consists of getting the current flags, clearing the FS_COMPR_FL bit and then sending the result to the set flags ioctl - this means the bit FS_NOCOMP_FL isn't set in the flags passed to the ioctl. This results in the compression property not being cleared from the inode - it was cleared only if the bit FS_NOCOMP_FL was set in the received flags. Reproducer: $ mkfs.btrfs -f /dev/sdd $ mount /dev/sdd /mnt && cd /mnt $ mkdir a $ chattr +c a $ touch a/file $ lsattr a/file --------c------- a/file $ chattr -c a $ touch a/file2 $ lsattr a/file2 --------c------- a/file2 $ lsattr -d a ---------------- a Reported-by:Andreas Schneider <asn@cryptomilk.org> Signed-off-by:
-
Qu Wenruo authored
btrfs-transacion:5657 [stack snip] btrfs_bio_map() btrfs_bio_counter_inc_blocked() percpu_counter_inc(&fs_info->bio_counter) ###bio_counter > 0(A) __btrfs_bio_map() btrfs_dev_replace_lock() mutex_lock(dev_replace->lock) ###wait mutex(B) btrfs:32612 [stack snip] btrfs_dev_replace_start() btrfs_dev_replace_lock() mutex_lock(dev_replace->lock) ###hold mutex(B) btrfs_dev_replace_finishing() btrfs_rm_dev_replace_blocked() wait until percpu_counter_sum == 0 ###wait on bio_counter(A) This bug can be triggered quite easily by the following test script: http://pastebin.com/MQmb37Cy This patch will fix the ABBA problem by calling btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked(). The consistency of btrfs devices list and their superblocks is protected by device_list_mutex, not btrfs_dev_replace_lock/unlock(). So it is safe the move btrfs_dev_replace_unlock() before btrfs_rm_dev_replace_blocked(). Reported-by:Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Cc: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by:
-
Liu Bo authored
We've defined a 'offset' out of bio_for_each_segment_all. This is just a clean rename, no function changes. Signed-off-by:
-
Mark Fasheh authored
btrfs_drop_snapshot() leaves subvolume qgroup items on disk after completion. This can cause problems with snapshot creation. If a new snapshot tries to claim the deleted subvolumes id, btrfs will get -EEXIST from add_qgroup_item() and go read-only. The following commands will reproduce this problem (assume btrfs is on /dev/sda and is mounted at /btrfs) mkfs.btrfs -f /dev/sda mount -t btrfs /dev/sda /btrfs/ btrfs quota enable /btrfs/ btrfs su sna /btrfs/ /btrfs/snap btrfs su de /btrfs/snap sleep 45 umount /btrfs/ mount -t btrfs /dev/sda /btrfs/ We can fix this by catching -EEXIST in add_qgroup_item() and initializing the existing items. We have the problem of orphaned relation items being on disk from an old snapshot but that is outside the scope of this patch. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Signed-off-by:
-
Liu Bo authored
Use %pf instead of %p, just same as kernel workqueue tracepoints. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Filipe Manana authored
The map_start and map_len fields aren't used anywhere, so just remove them. On a x86_64 system, this reduced sizeof(struct extent_buffer) from 296 bytes to 280 bytes, and therefore 14 extent_buffer structs can now fit into a page instead of 13. Signed-off-by:
-
Filipe Manana authored
Maximum xattr size can be up to nearly the leaf size. For an fs with a leaf size larger than the page size, using kmalloc requires allocating multiple pages that are contiguous, which might not be possible if there's heavy memory fragmentation. Therefore fallback to vmalloc if we fail to allocate with kmalloc. Also start with a smaller buffer size, since xattr values typically are smaller than a page. Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
-
David Sterba authored
Last user removed in commit "btrfs: disable strict file flushes for renames and truncates" (8d875f95). Signed-off-by:
-
Filipe Manana authored
While under random IO, a block group's free space cache eventually reaches a state where it has a mix of extent entries and bitmap entries representing free space regions. As later free space regions are returned to the cache, some of them are merged with existing extent entries if they are contiguous with them. But others are not merged, because despite the existence of adjacent free space regions in the cache, the merging doesn't happen because the existing free space regions are represented in bitmap extents. Even when new free space regions are merged with existing extent entries (enlarging the free space range they represent), we create chances of having after an enlarged region that is contiguous with some other region represented in a bitmap entry. Both clustered and non-clustered space allocation work by iterating over our extent and bitmap entries and skipping any that represents a region smaller then the allocation request (and giving preference to extent entries before bitmap entries). By having a contiguous free space region that is represented by 2 (or more) entries (mix of extent and bitmap entries), we end up not satisfying an allocation request with a size larger than the size of any of the entries but no larger than the sum of their sizes. Making the caller assume we're under a ENOSPC condition or force it to allocate multiple smaller space regions (as we do for file data writes), which adds extra overhead and more chances of causing fragmentation due to the smaller regions being all spread apart from each other (more likely when under concurrency). For example, if we have the following in the cache: * extent entry representing free space range: [128Mb - 256Kb, 128Mb[ * bitmap entry covering the range [128Mb, 256Mb[, but only with the bits representing the range [128Mb, 128Mb + 768Kb[ set - that is, only that space in this 128Mb area is marked as free An allocation request for 1Mb, starting at offset not greater than 128Mb - 256Kb, would fail before, despite the existence of such contiguous free space area in the cache. The caller could only allocate up to 768Kb of space at once and later another 256Kb (or vice-versa). In between each smaller allocation request, another task working on a different file/inode might come in and take that space, preventing the former task of getting a contiguous 1Mb region of free space. Therefore this change implements the ability to move free space from bitmap entries into existing and new free space regions represented with extent entries. This is done when a space region is added to the cache. A test was added to the sanity tests that explains in detail the issue too. Some performance test results with compilebench on a 4 cores machine, with 32Gb of ram and using an HDD follow. Test: compilebench -D /mnt -i 30 -r 1000 --makej Before this change: intial create total runs 30 avg 69.02 MB/s (user 0.28s sys 0.57s) compile total runs 30 avg 314.96 MB/s (user 0.12s sys 0.25s) read compiled tree total runs 3 avg 27.14 MB/s (user 1.52s sys 0.90s) delete compiled tree total runs 30 avg 3.14 seconds (user 0.15s sys 0.66s) After this change: intial create total runs 30 avg 68.37 MB/s (user 0.29s sys 0.55s) compile total runs 30 avg 382.83 MB/s (user 0.12s sys 0.24s) read compiled tree total runs 3 avg 27.82 MB/s (user 1.45s sys 0.97s) delete compiled tree total runs 30 avg 3.18 seconds (user 0.17s sys 0.65s) Signed-off-by:
-
Anand Jain authored
we are assigning number_devices to the total_bytes, that's very confusing for a moment Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Anand Jain authored
there is no matching open parenthesis for the closing parenthesis Signed-off-by:
-
Anand Jain authored
seed fs devices don't participate as rw_device, so don't increment rw_devices when the device being handled belongs to a seed fs. Signed-off-by:
-
Anand Jain authored
When we replace all the seed device in the system there is no point in just keeping the btrfs_fs_devices with out any device Signed-off-by:
-
Anand Jain authored
We are not updating sprout fs seed pointer when all seed device is replaced. This patch will check if all seed device has been replaced and then update the sprout pointer accordingly. Same reproducer as in the previous patch would apply here. And notice that btrfs_close_device will check if seed fs is present and spits out the error with out this patch. int btrfs_close_devices(struct btrfs_fs_devices *fs_devices) { :: seed_devices = fs_devices->seed; :: while (seed_devices) { fs_devices = seed_devices; seed_devices = fs_devices->seed; __btrfs_close_devices(fs_devices); free_fs_devices(fs_devices); } Signed-off-by: -
Anand Jain authored
reproducer: reproducer: mount /dev/sdb /btrfs btrfs dev add /dev/sdc /btrfs btrfs rep start -B /dev/sdb /dev/sdd /btrfs umount /btrfs WARNING: CPU: 0 PID: 3882 at fs/btrfs/volumes.c:892 __btrfs_close_devices+0x1c8/0x200 [btrfs]() which is WARN_ON(fs_devices->rw_devices); The problem here is that we did not add one to the rw_devices when we replace the seed device with a writable device. Signed-off-by:
-
