- 15 Nov, 2017 1 commit
-
-
Gabriel Fernandez authored
fix test of composite clock config (bad copy / past) Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@st.com> Fixes: 3e4d618b ("clk: stm32h7: Add stm32h743 clock driver") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org>
-
- 14 Nov, 2017 20 commits
-
-
Arnd Bergmann authored
gcc-4.4 got confused by the inline assembler statement: drivers/clk/pxa/clk-pxa.c: In function 'pxa2xx_core_turbo_switch': drivers/clk/pxa/clk-pxa.c:152: error: expected string literal before ')' token This removes the extraneous ':' to let all compilers parse the driver correctly. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
-
Mylene JOSSERAND authored
i2c1 and i2c2 bits for CCU are not bit 0 but bit 1 and bit 2. Because of that, the i2c0 (bit 0) was not correctly configured. Fixed the correct bits for i2c1 and i2c2. Fixes: 05359be1 ("clk: sunxi-ng: Add driver for A83T CCU") Signed-off-by:
Mylène Josserand <mylene.josserand@free-electrons.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Johan Hovold authored
Fix child node-lookup during probe, which ended up searching the whole device tree depth-first starting at parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately, but that fix was apparently never backported to stable. Fixes: 9ac33b0c ("CLK: TI: Driver for DRA7 ATL (Audio Tracking Logic)") Fixes: 660e1551 ("clk: ti: dra7-atl-clock: Fix of_node reference counting") Cc: stable <stable@vger.kernel.org> # 3.16: 660e1551 Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Johan Hovold authored
Make sure to search only the child nodes of "/clocks", rather than the whole device-tree depth-first starting at "/clocks" when determining whether to register a fixed clock in the legacy board-clock registration helper. Fixes: ee15faff ("clk: qcom: common: Add API to register board clocks backwards compatibly") Signed-off-by:
-
Stephen Boyd authored
* clk-uniphier: clk: uniphier: fix DAPLL2 clock rate of Pro5 clk: uniphier: fix parent of miodmac clock data
-
Stephen Boyd authored
* clk-gpio: clk: clk-gpio: Request GPIO descriptor as LOW clk: clk-gpio: Make GPIO clock provider use descriptors only
-
Stephen Boyd authored
* clk-mediatek: clk: mediatek: add clock support for MT7622 SoC clk: mediatek: add clocks dt-bindings required header for MT7622 SoC clk: mediatek: add the option for determining PLL source clock dt-bindings: clock: mediatek: document clk bindings for MediaTek MT7622 SoC clk: mediatek: mark mtk_infrasys_init_early __init clk: mediatek: Add MT2712 clock support clk: mediatek: Add dt-bindings for MT2712 clocks dt-bindings: ARM: Mediatek: Document bindings for MT2712
-
Stephen Boyd authored
* clk-imx: clk: imx: imx7d: Remove ARM_M0 clock clk: imx: imx7d: Fix parent clock for OCRAM_CLK clk: imx: clk-imx6ul: allow lcdif_pre_sel to change parent rate clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
-
Stephen Boyd authored
* clk-qcom: clk: qcom: clk-smd-rpm: add msm8996 rpmclks clk: qcom: Implement RPM clocks for MSM8660/APQ8060 clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC clk: qcom: Elaborate on "active" clocks in the RPM clock bindings clk: qcom: Remove unused RCG ops
-
Stephen Boyd authored
* clk-at91: clk: at91: utmi: set the mainck rate
-
Stephen Boyd authored
* clk-devm-provider: clk: qcom: common: Migrate to devm_* APIs for resets and clk providers clk: Add devm_of_clk_add_hw_provider()/del_provider() APIs
-
Stephen Boyd authored
* clk-const: clk: make clk_init_data const clk: imx: make clk_ops const clk: mmp: make clk_ops const clk: hisilicon: make clk_ops const clk: mxs: make clk_ops const clk: sirf: make clk_ops const clk: spear: make clk_ops const CLK: SPEAr: make aux_clk_masks structures const CLK: SPEAr: make structure field and function argument as const
-
Stephen Boyd authored
* clk-sunxi: clk: sunxi: explicitly request exclusive reset control clk: sunxi: fix build warning
-
Stephen Boyd authored
* clk-hikey: clk: hi3798cv200: correct parent mux clock for 'clk_sdio0_ciu' clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() clk: hi3660: fix incorrect uart3 clock freqency clk: hi6220: mark clock cs_atb_syspll as critical
-
Stephen Boyd authored
Merge tag 'tegra-for-4.15-clk-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next Pull tegra clk drivers updates from Thierry Reding: This contains cleanups and minor fixes for the Tegra clock driver. * tag 'tegra-for-4.15-clk-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: clk: tegra: Use readl_relaxed_poll_timeout_atomic() in tegra210_clock_init() clk: tegra: dfll: Fix drvdata overwriting issue clk: tegra: Fix cclk_lp divisor register clk: tegra: Bump SCLK clock rate to 216 MHz clk: tegra: Use common definition of APBDMA clock gate clk: tegra: Correct parent of the APBDMA clock clk: tegra: Add AHB DMA clock entry clk: tegra: Mark APB clock as critical clk: tegra: Make tegra_clk_pll_params __ro_after_init clk: tegra: Fix sor1_out clock implementation clk: tegra: Use tegra_clk_register_periph_data() clk: tegra: Add peripheral clock registration helper clk: tegra: Check BPMP response return code dt-bindings: clock: tegra: Add sor1_out clock firmware: tegra: Propagate error code to caller
-
Masahiro Yamada authored
The parent of DAPLL2 should be DAPLL1. Fix the clock connection. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
The "miodmac" is not a child of "stdmac". They are independent from each other. Fix it. Signed-off-by:
-
Shawn Guo authored
Other than 'mmc_mux', 'clk_sdio0_ciu' uses a different parent mux clock. Let's add this mux clock as 'sdio0_mux', and correct the parent of 'clk_sdio0_ciu' to be it. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Markus Elfring authored
clk: hisilicon: Delete an error message for a failed memory allocation in hisi_register_clkgate_sep() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Zhong Kaihua authored
UART3 clock rate is doubled in previous commit. This error is not detected until recently a mezzanine board which makes real use of uart3 port (through LS connector of 96boards) was setup and tested on hi3660-hikey960 board. This patch changes clock source rate of clk_factor_uart3 to 100000000. Signed-off-by:
Zhong Kaihua <zhongkaihua@huawei.com> Signed-off-by:
Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
-
- 02 Nov, 2017 19 commits
-
-
Linus Walleij authored
Requesting the GPIOD_OUT_LOW low will make sure the GPIO is deasserted when requested. The gpiolib core will make sure that if the GPIO line is active low, it will be logically driven high when deasserted, see drivers/gpiolib.c gpiod_configure_flags(). Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
After som grep:ing it turns out nothing in the kernel is really calling clk_[hw_]_register_gpio_[gate|mux](). All existing instances are just created directly from the device tree probe functions at the bottom of the clk-gpio.c clock provider file. This means we can change the signature of the function without any consequences! Everyone should be using GPIO descriptors now, so let's just go in and enforce that. This saves a bit of code since GPIO descriptors know inherently if they are active low so no need for the code keeping track of that. We leave it to the caller to come up with the GPIO descriptor. It is nowadays possible to do that even without a corresponding device, so no excuse not to pass them around. The one in-kernel user lifecycles it using devm_gpiod_get() in gpio_clk_driver_probe(). Cc: Sergej Sawazki <ce3a@gmx.de> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by:
-
Sean Wang authored
Add all supported clocks exported from every susbystem found on MT7622 SoC such as topckgen, apmixedsys, infracfg, pericfg , pciessys, ssusbsys, ethsys and audsys. Signed-off-by:
Chen Zhong <chen.zhong@mediatek.com> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Chen Zhong authored
Add the required header for the entire clocks dt-bindings exported from topckgen, apmixedsys, infracfg, pericfg, ethsys, pciesys, ssusbsys and audsys which could be found on MT7622 SoC. Signed-off-by:
-
Chen Zhong authored
Since the previous setup always sets the PLL using crystal 26MHz, this doesn't always happen in every MediaTek platform. So the patch added flexibility for assigning extra member for determining the PLL source clock. Signed-off-by:
-
Sean Wang authored
This patch adds the binding documentation for apmixedsys, ethsys, hifsys, infracfg, pericfg, topckgen and audsys for MT7622. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
On gcc-4.6, we get a harmless link-time warning: WARNING: vmlinux.o(.text.unlikely+0x196a0): Section mismatch in reference from the function mtk_infrasys_init_early() to the function .init.text:mtk_clk_register_cpumuxes() The function mtk_infrasys_init_early() references the function __init mtk_clk_register_cpumuxes(). This is often because mtk_infrasys_init_early lacks a __init annotation or the annotation of mtk_clk_register_cpumuxes is wrong. Newer compilers inline this function so they don't warn, but marking it __init is the right solution for all versions. Fixes: e9862118 ("clk: mediatek: Add MT2701 clock support") Signed-off-by:
-
weiyi.lu@mediatek.com authored
Add MT2712 clock support, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by:
Weiyi Lu <weiyi.lu@mediatek.com> [sboyd@codeaurora.org: Static on top_clk_data] Signed-off-by:
-
weiyi.lu@mediatek.com authored
Add MT2712 clock dt-bindings, include topckgen, apmixedsys, infracfg, pericfg, mcucfg and subsystem clocks. Signed-off-by:
-
weiyi.lu@mediatek.com authored
This patch adds the binding documentation for apmixedsys, bdpsys, imgsys, imgsys, infracfg, mcucfg, mfgcfg, mmsys, pericfg, topckgen, vdecsys and vencsys for Mediatek MT2712. Acked-by:
-
Adriana Reus authored
IMX7d does not have an M0 Core and this particular clock doesn't seem connected to anything else. Remove this entry from the CCM driver. Signed-off-by:
Adriana Reus <adriana.reus@nxp.com> Signed-off-by:
-
Adriana Reus authored
The parent of OCRAM_CLK should be axi_main_root_clk and not axi_post_div. before: axi_src 1 1 332307692 0 0 axi_cg 1 1 332307692 0 0 axi_pre_div 1 1 332307692 0 0 axi_post_div 1 1 332307692 0 0 ocram_clk 0 0 332307692 0 0 main_axi_root_clk 1 1 332307692 0 0 after: axi_src 1 1 332307692 0 0 axi_cg 1 1 332307692 0 0 axi_pre_div 1 1 332307692 0 0 axi_post_div 1 1 332307692 0 0 main_axi_root_clk 1 1 332307692 0 0 ocram_clk 0 0 332307692 0 0 Reference Doc: i.MX 7D Reference Manual - Chap 5, p 516 (https://www.nxp.com/docs/en/reference-manual/IMX7DRM.pdf) Fixes: 8f6d8094 ("ARM: imx: add imx7d clk tree support") Signed-off-by: -
Philipp Zabel authored
Allowing the lcdif_pre_sel to propagate rate changes to its parent PLL allows more fine grained control over the LCDIF pixel clock rate. For example, the Innovision AT043TN24 LCD panel described in the imx6ul-14x14-evk device tree requires a 9 MHz pixel clock. Before this patch, the lcdif_pre_sel clock rate is fixed, and just setting the lcdif_pred and lcdif_podf dividers only allows to get as close as about 8.44 MHz: pll3 1 1 480000000 0 0 pll3_bypass 1 1 480000000 0 0 pll3_usb_otg 1 1 480000000 0 0 pll3_pfd1_540m 1 1 540000000 0 0 lcdif_pre_sel 1 1 540000000 0 0 lcdif_pred 1 1 67500000 0 0 lcdif_podf 1 1 8437500 0 0 lcdif_pix 1 1 8437500 0 0 Once lcdif_pre_sel is allowed to propagate rate requests to its parent, the actual pixel clock matches the requested value: pll3 1 1 480000000 0 0 pll3_bypass 1 1 480000000 0 0 pll3_usb_otg 1 1 480000000 0 0 pll3_pfd1_540m 1 1 288000000 0 0 lcdif_pre_sel 1 1 288000000 0 0 lcdif_pred 1 1 36000000 0 0 lcdif_podf 1 1 9000000 0 0 lcdif_pix 1 1 9000000 0 0 Signed-off-by:Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Sébastien Szymanski authored
On i.MX6 SoCs without VPU (in my case MCIMX6D4AVT10AC), the hdmi driver fails to probe: [ 2.540030] dwhdmi-imx 120000.hdmi: Unsupported HDMI controller (0000:00:00) [ 2.548199] imx-drm display-subsystem: failed to bind 120000.hdmi (ops dw_hdmi_imx_ops): -19 [ 2.557403] imx-drm display-subsystem: master bind failed: -19 That's because hdmi_isfr's parent, video_27m, is not correctly ungated. As explained in commit 5ccc248c ("ARM: imx6q: clk: Add support for mipi_core_cfg clock as a shared clock gate"), video_27m is gated by CCM_CCGR3[CG8]. On i.MX6 SoCs with VPU, the hdmi is working thanks to the CCM_CMEOR[mod_en_ov_vpu] bit which makes the video_27m ungated whatever is in CCM_CCGR3[CG8]. The issue can be reproduced by setting CCMEOR[mod_en_ov_vpu] to 0. Make the HDMI work in every case by setting hdmi_isfr's parent to mipi_core_cfg. Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by:
-
Rajendra Nayak authored
Add all RPM controlled clocks on msm8996 platform [srini: Fixed various issues with offsets and made names specific to msm8996] Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Rajendra Nayak <rnayak@codeaurora.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Linus Walleij authored
The RPM clocks were missing for MSM8660/APQ8060. For this to be completed we need to add a special fixed rate RPM clock that is used for the PLL4 on these SoCs. The rest of the clocks are pretty similar to the other supported platforms. The "active" clock pattern is mirrored in all the clocks. I guess that the PLL4 that clocks the LPASS is actually never used as "active only" since the low-power audio subsystem should be left on when the CPU goes to idle, so that it can be used as a stand-alone MP3 player type of device. The PLL4 seems to be enabled only on behalf of the booting LPASS Hexagon - which will cast its own vote once its booted - and as such we only configure the active state (meaning both states will have same configuration). The result is that PLL4 will be on from prepare() to unprepare() regardless of what the application CPU does. Signed-off-by:
-
Linus Walleij authored
These compatible strings need to be added to extend support for the RPM CC to cover MSM8660/APQ8060. We also need to add enumberators to the include file for a few clocks that were missing. Cc: devicetree@vger.kernel.org Acked-by:
-
Linus Walleij authored
The concept of "active" clocks is just explained in a bried comment in the device driver, let's explain it a bit more in the device tree bindings so everyone understands this. Cc: devicetree@vger.kernel.org Acked-by:
-
Georgi Djakov authored
The RCGs ops for shared branches are not used now, so remove it. Signed-off-by:
Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by:
-
