- 16 Mar, 2023 8 commits
-
-
Sandipan Patra authored
Implement thermal zone support for mlx5 based HW. The NIC uses temperature sensor provided by ASIC to report current temperature to thermal core. Signed-off-by: Sandipan Patra <spatra@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-5-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jiri Pirko authored
Add comment to mlx5_devlink_params_register() functions so it is clear that only driver init params should be registered here. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-4-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Moshe Shemesh authored
If driver teardown is called while PCI is turned off, there is a race between health recovery and teardown. If health recovery already started it will wait 60 sec trying to see if PCI gets back and it can recover, but actually there is no need to wait anymore once teardown was called. Use the MLX5_BREAK_FW_WAIT flag which is set on driver teardown to break waiting for PCI up. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-3-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Moshe Shemesh authored
When shutdown or remove callbacks are called the driver sets the flag MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There is no need to clear the bit as once shutdown or remove were called as there is no way back, the driver is going down. Furthermore, if not cleared the flag can be used also in other loops where we may wait while teardown was already called. Use test_bit() instead of test_and_clear_bit() as there is no need to clear the flag. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20230314054234.267365-2-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wolfram Sang authored
'temp' was used before commit c0c99d0c ("net: phy: micrel: remove the use of .ack_interrupt()") refactored the code. Now, we can simplify it a little. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230314124928.44948-1-wsa+renesas@sang-engineering.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Wolfram Sang authored
Commit 899a3cbb ("net: phy: remove states PHY_STARTING and PHY_PENDING") missed to update a comment in phy_probe. Remove superfluous "Description:" prefix while we are here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== ice: refactor mailbox overflow detection Jake Keller says: The primary motivation of this series is to cleanup and refactor the mailbox overflow detection logic such that it will work with Scalable IOV. In addition a few other minor cleanups are done while I was working on the code in the area. First, the mailbox overflow functions in ice_vf_mbx.c are refactored to store the data per-VF as an embedded structure in struct ice_vf, rather than stored separately as a fixed-size array which only works with Single Root IOV. This reduces the overall memory footprint when only a handful of VFs are used. The overflow detection functions are also cleaned up to reduce the need for multiple separate calls to determine when to report a VF as potentially malicious. Finally, the ice_is_malicious_vf function is cleaned up and moved into ice_virtchnl.c since it is not Single Root IOV specific, and thus does not belong in ice_sriov.c I could probably have done this in fewer patches, but I split pieces out to hopefully aid in reviewing the overall sequence of changes. This does cause some additional thrash as it results in intermediate versions of the refactor, but I think its worth it for making each step easier to understand. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg() ice: move ice_is_malicious_vf() to ice_virtchnl.c ice: print message if ice_mbx_vf_state_handler returns an error ice: pass mbxdata to ice_is_malicious_vf() ice: remove unnecessary &array[0] and just use array ice: always report VF overflowing mailbox even without PF VSI ice: declare ice_vc_process_vf_msg in ice_virtchnl.h ice: initialize mailbox snapshot earlier in PF init ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler ice: remove ice_mbx_deinit_snapshot ice: move VF overflow message count into struct ice_mbx_vf_info ice: track malicious VFs in new ice_mbx_vf_info structure ice: convert ice_mbx_clear_malvf to void and use WARN ice: re-order ice_mbx_reset_snapshot function ==================== Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/ptp/ptp_ines.c:783:34: error: ‘ines_ptp_ctrl_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230312132637.352755-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 15 Mar, 2023 30 commits
-
-
Alexander Mikhalitsyn authored
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS. For some reason we have no corresponding check for SO_PASSSEC. In the recvmsg(2) doc we have: MSG_CTRUNC indicates that some control data was discarded due to lack of space in the buffer for ancillary data. So, we need to set MSG_CTRUNC flag for all types of SCM. This change can break applications those don't check MSG_CTRUNC flag. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> v2: - commit message was rewritten according to Eric's suggestion Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Wenjia Zhang says: ==================== smc: Updates 2023-03-01 The 1st patch is to make implements later do not need to adhere to a specific SEID format. The 2nd patch does some cleanup. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Raspl authored
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stefan Raspl authored
Previously, v2 support was derived from a very specific format of the SEID as part of the SMC-D codebase. Make this part of the SMC-D device API, so implementers do not need to adhere to a specific SEID format. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Reviewed-and-tested-by: Jan Karcher <jaka@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Josef Miegl authored
The GENEVE tunnel used with IFLA_GENEVE_INNER_PROTO_INHERIT is point-to-point, so set IFF_POINTOPOINT to reflect that. Signed-off-by: Josef Miegl <josef@miegl.cz> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
Core already sets owner in spi_driver. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/ca8210.c:3174:34: error: ‘ca8210_of_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/at86rf230.c:1644:34: error: ‘at86rf230_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/mcr20a.c:1340:34: error: ‘mcr20a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/ieee802154/adf7242.c:1322:34: error: ‘adf7242_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/phy/spi_ks8995.c:156:34: error: ‘ks8895_spi_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/ocelot_ext.c:143:34: error: ‘ocelot_ext_switch_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/microchip/ksz9477_i2c.c:84:34: error: ‘ksz9477_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/ocelot/seville_vsc9953.c:1070:34: error: ‘seville_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver will match mostly or only by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). drivers/net/dsa/lan9303_i2c.c:97:34: error: ‘lan9303_i2c_of_match’ defined but not used [-Werror=unused-const-variable=] drivers/net/dsa/lan9303_mdio.c:157:34: error: ‘lan9303_mdio_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/net/dsa/lantiq_gswip.c:1888:34: error: ‘xway_gphy_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/nfc/trf7970a.c:2232:34: error: ‘trf7970a_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/ni/nixge.c:1253:34: error: ‘nixge_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:220:34: error: ‘sxgbe_dt_ids’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/marvell/pxa168_eth.c:1575:34: error: ‘pxa168_eth_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it is not relevant here). drivers/net/ethernet/stmicro/stmmac/dwmac-generic.c:72:34: error: ‘dwmac_generic_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Krzysztof Kozlowski authored
The driver is specific to ARCH_QCOM which depends on OF thus the driver is OF-only. Its of_device_id table is built unconditionally, thus of_match_ptr() for ID table does not make sense. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Oleksij Rempel says: ==================== net: dsa: microchip: tc-ets support changes v3: - add tc_ets_supported to match supported devices - dynamically regenerated default TC to queue map. - add Acked-by to the first patch changes v2: - run egress limit configuration on all queue separately. Otherwise configuration may not apply correctly. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Add ETS Qdisc support for KSZ9477 of switches. Current implementation is limited to strict priority mode. Tested on KSZ8563R with following configuration: tc qdisc replace dev lan2 root handle 1: ets strict 4 \ priomap 3 3 2 2 1 1 0 0 ip link add link lan2 name v1 type vlan id 1 \ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 and patched iperf3 version: https://github.com/esnet/iperf/pull/1476 iperf3 -c 172.17.0.1 -b100M -l1472 -t100 -u -R --sock-prio 2 Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Add ksz_setup_tc_mode() to make queue scheduling and shaping configuration more visible. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Eric Dumazet says: ==================== ipv6: optimize rt6_score_route() This patch series remove an expensive rwlock acquisition in rt6_check_neigh()/rt6_score_route(). First patch adds missing annotations, and second patch implements the optimization. ==================== Link: https://lore.kernel.org/r/20230313201732.887488-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
rt6_check_neigh() uses read_lock() to protect n->nud_state reading. This seems overkill and causes false sharing. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
We have many lockless accesses to n->nud_state. Before adding another one in the following patch, add annotations to readers and writers. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Horatiu Vultur authored
As the function always returns 0 change the return type to be void instead of int. In this way also remove a wrong message in case of error which would never happen. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230312195155.1492881-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 14 Mar, 2023 2 commits
-
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230310144716.1544083-1-robh@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueJakub Kicinski authored
Tony Nguyen says: ==================== i40e: support XDP multi-buffer Tirthendu Sarkar says: This patchset adds multi-buffer support for XDP. Tx side already has support for multi-buffer. This patchset focuses on Rx side. The last patch contains actual multi-buffer changes while the previous ones are preparatory patches. On receiving the first buffer of a packet, xdp_buff is built and its subsequent buffers are added to it as frags. While 'next_to_clean' keeps pointing to the first descriptor, the newly introduced 'next_to_process' keeps track of every descriptor for the packet. On receiving EOP buffer the XDP program is called and appropriate action is taken (building skb for XDP_PASS, reusing page for XDP_DROP, adjusting page offsets for XDP_{REDIRECT,TX}). The patchset also streamlines page offset adjustments for buffer reuse to make it easier to post process the rx_buffers after running XDP prog. With this patchset there does not seem to be any performance degradation for XDP_PASS and some improvement (~1% for XDP_TX, ~5% for XDP_DROP) when measured using xdp_rxq_info program from samples/bpf/ for 64B packets. v1: https://lore.kernel.org/netdev/20230306210822.3381942-1-anthony.l.nguyen@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: add support for XDP multi-buffer Rx i40e: add xdp_buff to i40e_ring struct i40e: introduce next_to_process to i40e_ring i40e: use frame_sz instead of recalculating truesize for building skb i40e: Change size to truesize when using i40e_rx_buffer_flip() i40e: add pre-xdp page_count in rx_buffer i40e: change Rx buffer size for legacy-rx to support XDP multi-buffer i40e: consolidate maximum frame size calculation for vsi ==================== Link: https://lore.kernel.org/r/20230309212819.1198218-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-