- 09 Apr, 2021 40 commits
-
-
Aric Cyr authored
DC version 3.2.130 brings improvements in multiple areas. In summary, we highlight: - Firmware release 0.0.59 - Fixes on display experiences for 4k TVs, register mask missing, etc. - Enhancements on MST, code cleaning and debug messages. Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Anthony Koo authored
[How&Why] add params to send FEC status to firmware Signed-off-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why & How] Pipe input DSC bpc has a type mismatch with maximum DSC input bpc - align the maximum with the pipe input type, unsigned integer. When checking the type we shoudl also check for an implicit value of 0 and align with what the spreadsheet does - default to max. Rename output_bpc to dsc_input_bpc to reflect what the field is actually used for. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Harry VanZyllDeJong authored
[WHY] When on the desktop freesync is not enabled, doing a frame stretch causes the TV to display undesired output. [HOW] By changing the logic so that when ever fresync is supported the TV is notified we are in fressync instead on a non fresync state. Signed-off-by:
Harry VanZyllDeJong <hvanzyll@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Mikita Lipski authored
[Why&How] The driver always wants to synchronize streams to the first edge of master's vsync pulse. In order to determine that we can read timing flags that are used to program vsync. Master stream's vsync polarity - Multi Display Stream Synchronization edge: Negative - Falling Edge Positive - Rising Edge Signed-off-by:Mikita Lipski <mikita.lipski@amd.com> Reviewed-by:
Sun peng Li <Sunpeng.Li@amd.com> Acked-by:
-
Mikita Lipski authored
[Why] Need to be able to trigger software hotplug for MST connectors [How] For unplug the driver calls to disable topologies manager that connector is attached to. For plugging in it does the whole rediscovery of all connectors in drm device and enbles their topologies if attached. The interface for MST connectors works in the following way: 1. To disconnect all MST topologies currently connected: echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst 2. To reconnect/rediscover all topologies that are physically connected to the card: echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst A related fix which has been merged with this patch Leo Ma(Hanghong Ma)'s work: Set power states before disable MST topology [Why] When we try to disable MST topology from the debugfs entry, some receiver will hang. [How] Set DPCD 600h power states to 2(power down mode)before disable MST topology. Signed-off-by:
-
Mikita Lipski authored
[why/how] Skip logic that sets preffered link settings and just retrain with new link_settings from Debugfs Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Qingqing Zhuo authored
[Why] DCN3 is not reusing DCN1 mask_sh_list, causing SURFACE_FLIP_INT_MASK missing in the mapping. [How] Add the corresponding entry to DCN3 list. Signed-off-by:
-
Wayne Lin authored
[Why] Commit 1c85f3db ("drm/amd/display: Add kernel doc to crc_rd_wrk field") adds kernel doc for crc_rd_wrk field in amdgpu_dm.h but it's incorrectly formatted. Make htmldocs warns: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:398: warning: Incorrect use of kernel-doc format: * @crc_rd_wrk [How] Tweak the kernel doc for crc_rd_wrk. Fixes: 1c85f3db ("drm/amd/display: Add kernel doc to crc_rd_wrk field") Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
-
Mikita Lipski authored
[why/how] Due to compiler optimization the values would be passed to the division function uninitialized causing a div by zero. Initialize the numerator and denominator to 0 and 1 to prevent division by zero. Signed-off-by:
-
Victor Lu authored
[why] Currently to view the DCC_EN bit the entire DTN log must be dumped. A compact method to view the DCC_EN bit is desirable. [how] Introduce new debugfs interface that only dumps the DCC_EN bit. Example usage: cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en Signed-off-by:
Victor Lu <victorchengchi.lu@amd.com> Reviewed-by:
-
Harry Wentland authored
[Why&How] Add debug flag for an option to disable min fclk. Signed-off-by:
-
Harry Wentland authored
[Why&How] Add debug prints for SMU messages with regard to versions, clocks, and more. Signed-off-by:
Robin Singh <Robin.Singh@amd.com> Acked-by:
-
Jake Wang authored
[Why] We need to keep track of the number of eDP links to properly enumerate edp panel control instance. [How] Added dc_edp_id_count to dc_context to keep track of number of eDP links. Signed-off-by:
Jake Wang <haonan.wang2@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
[Why] Functionality of LTTPR is reporter through the DPCD register [How] Expose a interface in debugfs to read the current status of LTTPR as reported from the device's DPCD register Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
Leo Li authored
[Why] The OTG_VUPDATE_KEEPOUT register and fields is available on DCN10, and named the same in DCN20. [How] Move register definition and programming function to dcn10 optc. There is no functional change. Signed-off-by:
-
Robin Singh authored
[why] There is case when the userspace like IGT test updates the custom timings, i.e. the number of active lines CRTC property value, and without committing the change, followed by resetting the display, creating FB and plane to the pipe and committing. The NULL pointer of pipe_ctx->plane_state occurs and result in kernel crash. We need to avoid that. [how] add pointer check for the dc_plane_state of the pipe context in the call of committing planes for stream in DC component. Signed-off-by:
-
David (Dingchen) Zhang authored
[why] In MST setup, we'd use MST downstream AUX to dump the DPRX CRCs from sink device. [how] Assign the mst_port->aux to read DPCD registers. Signed-off-by:David (Dingchen) Zhang <dingchen.zhang@amd.com> Reviewed-by:
-
Wyatt Wood authored
[Why] Today a parameter is passed to dmub_srv_send_gpint_command which specifies the max amount of time to wait for the command to be acked. This parameter instead specifies the number of times to check if the command was acked. We wish to add a lower bound to the timeout, which can be accomplished by using a delay or a timestamp. It has been decided to use udelay instead of a timestamp simply because we don't want to expose a high precision counter if it doesn't yield large benefits. [How] Add udelay(1) between each for loop iteration. Signed-off-by:
Wyatt Wood <wyatt.wood@amd.com> Reviewed-by:
-
Wyatt Wood authored
[Why] GPINT command to get PSR state from FW times out. [How] Add retry to get valid PSR state. Signed-off-by:
-
Hawking Zhang authored
gfx ras is only available in cerntain ip generations. Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Dennis Li <Dennis.Li@amd.com> Reviewed-by:
John Clements <John.Clements@amd.com> Signed-off-by:
-
Hawking Zhang authored
mmhub ras is only avaiable in cerntain mmhub ip generation. Signed-off-by:
-
Hawking Zhang authored
df/mca ras is not managed by gpu driver when gpu is connected to cpu through xgmi. gpu driver should register x86 mca notifier for umc ras error notification Signed-off-by:
-
Hawking Zhang authored
umc ras is not managed by gpu driver when gpu is connected to cpu through xgmi. split umc callbacks into ras and non-ras ones so gpu driver only initializes umc ras callbacks when it manages umc ras. Signed-off-by:
-
Hawking Zhang authored
xgmi ras is not managed by gpu driver when gpu is connected to cpu through xgmi. move all xgmi ras functions to xgmi_ras_funcs so gpu driver only initializes xgmi ras functions when it manages xgmi ras. Signed-off-by:
-
Hawking Zhang authored
nbio ras is not managed by gpu driver when gpu is connected to cpu through xgmi. split nbio callbacks into ras and non-ras ones so gpu driver only initializes nbio ras callbacks when it manages nbio ras. Signed-off-by:
-
Hawking Zhang authored
query_ras_error_address will be invoked to query bad page address when there is poison data in HBM consumed by GPU engines. Signed-off-by:
-
Hawking Zhang authored
umc query_ras_error_count will be invoked to query umc correctable and uncorrectable error. It will reset the umc ras error counter after the query. Signed-off-by:
-
Hawking Zhang authored
Add helper functions to query correctable and uncorrectable umc ras error. Signed-off-by:
-
Hawking Zhang authored
umc_v6_7_funcs are callbacks to support umc ras functionalities in aldebaran Signed-off-by:
-
Hawking Zhang authored
Driver only manages GFX/SDMA/MMHUB RAS in platforms that gpu node is connected to cpu through XGMI, other than that, it queries VBIOS for RAS capabilities. Signed-off-by:
-
Amber Lin authored
Power Management IP is initialized/enabled before KFD init. When a thermal throttling happens before kfd_smi_init is done, calling the KFD SMI update function causes a stack dump by referring a NULL pointer ( smi_clients list). Check if kfd_init is completed before calling the function. Signed-off-by:
Amber Lin <Amber.Lin@amd.com> Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
Wan Jiabing authored
struct mod_hdcp is declared twice. One is declared at 33rd line. The blew one is not needed. Remove the duplicate. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Signed-off-by:
-
Alex Deucher authored
These were leftover from the old CI dpm code which was retired a while ago. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Bernard Zhao authored
Fix patch check warning: WARNING: suspect code indent for conditional statements (8, 17) + if (obj && obj->use < 0) { + DRM_ERROR("RAS ERROR: Unbalance obj(%s) use\n", obj->head.name); WARNING: braces {} are not necessary for single statement blocks + if (obj && obj->use < 0) { + DRM_ERROR("RAS ERROR: Unbalance obj(%s) use\n", obj->head.name); + } Signed-off-by:Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Bernard Zhao authored
Fix patch check warning: WARNING: Prefer kmalloc_array over kmalloc with multiply + buf = kmalloc(MAX_KFIFO_SIZE * sizeof(*buf), GFP_KERNEL); Signed-off-by:
-
Stanley.Yang authored
Signed-off-by:
Stanley.Yang <Stanley.Yang@amd.com> Reivewed-by:
-
Philip Yang authored
Forgot to reserve a fence slot to use sdma to update page table, cause below kernel BUG backtrace to handle vm retry fault while application is exiting. [ 133.048143] kernel BUG at /home/yangp/git/compute_staging/kernel/drivers/dma-buf/dma-resv.c:281! [ 133.048487] Workqueue: events amdgpu_irq_handle_ih1 [amdgpu] [ 133.048506] RIP: 0010:dma_resv_add_shared_fence+0x204/0x280 [ 133.048672] amdgpu_vm_sdma_commit+0x134/0x220 [amdgpu] [ 133.048788] amdgpu_vm_bo_update_range+0x220/0x250 [amdgpu] [ 133.048905] amdgpu_vm_handle_fault+0x202/0x370 [amdgpu] [ 133.049031] gmc_v9_0_process_interrupt+0x1ab/0x310 [amdgpu] [ 133.049165] ? kgd2kfd_interrupt+0x9a/0x180 [amdgpu] [ 133.049289] ? amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049408] amdgpu_irq_dispatch+0xb6/0x240 [amdgpu] [ 133.049534] amdgpu_ih_process+0x9b/0x1c0 [amdgpu] [ 133.049657] amdgpu_irq_handle_ih1+0x21/0x60 [amdgpu] [ 133.049669] process_one_work+0x29f/0x640 [ 133.049678] worker_thread+0x39/0x3f0 [ 133.049685] ? process_one_work+0x640/0x640 Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Peng Ju Zhou authored
1. expand rlcg interface for gc & mmhub indirect access 2. add rlcg interface for no kiq v2: squash in fix for gfx9 (Changfeng) Signed-off-by:
Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by:
Emily.Deng <Emily.Deng@amd.com> Signed-off-by:
-
Peng Ju Zhou authored
using the control bits got from host to control registers access. Signed-off-by:
-
