Revert the following commit:

  b6959a36 ("x86/unwind: Detect bad stack return address")

... because Andrey Konovalov reported an unwinder warning:

  WARNING: unrecognized kernel stack return address ffffffffa0000001 at ffff88006377fa18 in a.out:4467

The unwind was initiated from an interrupt which occurred while running in the
generated code for a kprobe.  The unwinder printed the warning because it
expected regs->ip to point to a valid text address, but instead it pointed to
the generated code.

Eventually we may want come up with a way to identify generated kprobe
code so the unwinder can know that it's a valid return address.  Until
then, just remove the warning.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/02f296848fbf49fb72dfeea706413ecbd9d4caf6.1482418739.git.jpoimboe@redhat.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

A bugfix commit:

  45dbea5f ("x86/paravirt: Fix native_patch()")

... introduced a harmless warning:

  arch/x86/kernel/paravirt_patch_32.c: In function 'native_patch':
  arch/x86/kernel/paravirt_patch_32.c:71:1: error: label 'patch_default' defined but not used [-Werror=unused-label]

Fix it by annotating the label as __maybe_unused.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Piotr Gregor <piotrgregor@rsyncme.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 45dbea5f ("x86/paravirt: Fix native_patch()")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

When we switch to virtual addresses and, especially after
reserve_initrd()->relocate_initrd() have run, we have the updated initrd
address in initrd_start. Use initrd_start then instead of the address
which has been passed to us through boot params. (That still gets used
when we're running the very early routines on the BSP).
Reported-and-tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20161220144012.lc4cwrg6dphqbyqu@pd.tnicSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

__printf() attributes help detecting issues in printf() format strings at
compile time.

Even though imr_selftest.c is only compiled with
CONFIG_DEBUG_IMR_SELFTEST=y, GCC complains about a missing format
attribute when compiling allmodconfig with -Wmissing-format-attribute.

Silence this warning by adding the attribute.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161219132144.4108-1-nicolas.iooss_linux@m4x.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The Intel Mid goes in and creates a I2C device for the
MPU3050 if the input driver for MPU-3050 is activated.

As of commit:

  3904b28e ("iio: gyro: Add driver for the MPU-3050 gyroscope")

.. there is a proper and fully featured IIO driver for this
device, so deprecate the use of the incomplete input driver
by augmenting the device population code to react to the
presence of the IIO driver's Kconfig symbol instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1481722794-4348-1-git-send-email-linus.walleij@linaro.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

We use sync_core() in the alternatives code to stop speculative
execution of prefetched instructions because we are potentially changing
them and don't want to execute stale bytes.

What it does on most machines is call CPUID which is a serializing
instruction. And that's expensive.

However, the instruction cache is serialized when we're on the local CPU
and are changing the data through the same virtual address. So then, we
don't need the serializing CPUID but a simple control flow change. Last
being accomplished with a CALL/RET which the noinline causes.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161203150258.vwr5zzco7ctgc4pe@pd.tnicSigned-off-by: Ingo Molnar <mingo@kernel.org>

It means different things on Intel and AMD so write it down so that
there's no confusion.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yazen Ghannam <yazen.ghannam@amd.com>
Link: http://lkml.kernel.org/r/20161117094557.jm6hwzdd52h7iwnj@pd.tnicSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

There is a feature in Hyper-V ('Debug-VM --InjectNonMaskableInterrupt')
which injects NMI to the guest. We may want to crash the guest and do kdump
on this NMI by enabling unknown_nmi_panic. To make kdump succeed we need to
allow the kdump kernel to re-establish VMBus connection so it will see
VMBus devices (storage, network,..).

To properly unload VMBus making it possible to start over during kdump we
need to do the following:

 - Send an 'unload' message to the hypervisor. This can be done on any CPU
   so we do this the crashing CPU.

 - Receive the 'unload finished' reply message. WS2012R2 delivers this
   message to the CPU which was used to establish VMBus connection during
   module load and this CPU may differ from the CPU sending 'unload'.

Receiving a VMBus message means the following:

 - There is a per-CPU slot in memory for one message. This slot can in
   theory be accessed by any CPU.

 - We get an interrupt on the CPU when a message was placed into the slot.

 - When we read the message we need to clear the slot and signal the fact
   to the hypervisor. In case there are more messages to this CPU pending
   the hypervisor will deliver the next message. The signaling is done by
   writing to an MSR so this can only be done on the appropriate CPU.

To avoid doing cross-CPU work on crash we have vmbus_wait_for_unload()
function which checks message slots for all CPUs in a loop waiting for the
'unload finished' messages. However, there is an issue which arises when
these conditions are met:

 - We're crashing on a CPU which is different from the one which was used
   to initially contact the hypervisor.

 - The CPU which was used for the initial contact is blocked with interrupts
   disabled and there is a message pending in the message slot.

In this case we won't be able to read the 'unload finished' message on the
crashing CPU. This is reproducible when we receive unknown NMIs on all CPUs
simultaneously: the first CPU entering panic() will proceed to crash and
all other CPUs will stop themselves with interrupts disabled.

The suggested solution is to handle unknown NMIs for Hyper-V guests on the
first CPU which gets them only. This will allow us to rely on VMBus
interrupt handler being able to receive the 'unload finish' message in
case it is delivered to a different CPU.

The issue is not reproducible on WS2016 as Debug-VM delivers NMI to the
boot CPU only, WS2012R2 and earlier Hyper-V versions are affected.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: devel@linuxdriverproject.org
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Link: http://lkml.kernel.org/r/20161202100720.28121-1-vkuznets@redhat.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Aside from being excessively slow, CPUID is problematic: Linux runs
on a handful of CPUs that don't have CPUID.  Use IRET-to-self
instead.  IRET-to-self works everywhere, so it makes testing easy.

For reference, On my laptop, IRET-to-self is ~110ns,
CPUID(eax=1, ecx=0) is ~83ns on native and very very slow under KVM,
and MOV-to-CR2 is ~42ns.

While we're at it: sync_core() serves a very specific purpose.
Document it.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/5c79f0225f68bc8c40335612bf624511abb78941.1481307769.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The Intel microcode driver is using sync_core() to mean "do CPUID
with EAX=1".  I want to rework sync_core(), but first the Intel
microcode driver needs to stop depending on its current behavior.
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Juergen Gross <jgross@suse.com>
Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/535a025bb91fed1a019c5412b036337ad239e5bb.1481307769.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

This reverts commit ed68d7e9.

The patch wasn't quite correct -- there are non-Intel (and hence
non-486) CPUs that we support that don't have CPUID.  Since we no
longer require CPUID for sync_core(), just revert the patch.

I think the relevant CPUs are Geode and Elan, but I'm not sure.

In principle, we should try to do better at identifying CPUID-less
CPUs in early boot, but that's more complicated.
Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/82acde18a108b8e353180dd6febcc2876df33f24.1481307769.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

We support various non-Intel CPUs that don't have the CPUID
instruction, so the M486 test was wrong.  For now, fix it with a big
hammer: handle missing CPUID on all 32-bit CPUs.
Reported-by: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Matthew Whitehead <tedheadster@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel <Xen-devel@lists.xen.org>
Link: http://lkml.kernel.org/r/685bd083a7c036f7769510b6846315b17d6ba71f.1481307769.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

A typo (or mis-merge?) resulted in leaf 6 only being probed if
cpuid_level >= 7.

Fixes: 2ccd71f1 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Link: http://lkml.kernel.org/r/6ea30c0e9daec21e488b54761881a6dfcf3e04d0.1481825597.git.luto@kernel.orgSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

gcc-7 warns:

In file included from arch/x86/tools/relocs_64.c:17:0:
arch/x86/tools/relocs.c: In function ‘process_64’:
arch/x86/tools/relocs.c:953:2: warning: argument 1 null where non-null expected [-Wnonnull]
  qsort(r->offset, r->count, sizeof(r->offset[0]), cmp_relocs);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/tools/relocs.h:6:0,
                 from arch/x86/tools/relocs_64.c:1:
/usr/include/stdlib.h:741:13: note: in a call to function ‘qsort’ declared here         
 extern void qsort 

This happens because relocs16 is not used for ELF_BITS == 64, 
so there is no point in trying to sort it.

Make the sort_relocs(&relocs16) call 32bit only.
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Link: http://lkml.kernel.org/r/20161215124513.GA289@x4Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

The unwinder warnings are good at finding unexpected unwinder issues,
but they often don't give enough data to be able to fully diagnose them.
Print a one-time stack dump when a warning is detected.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/15607370e3ddb1732b6a73d5c65937864df16ac8.1481904011.git.jpoimboe@redhat.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Somehow, CONFIG_PARAVIRT=n convinces gcc to change the
x86_64_start_kernel() prologue from:

  0000000000000129 <x86_64_start_kernel>:
   129:	55                   	push   %rbp
   12a:	48 89 e5             	mov    %rsp,%rbp

to:

  0000000000000124 <x86_64_start_kernel>:
   124:	4c 8d 54 24 08       	lea    0x8(%rsp),%r10
   129:	48 83 e4 f0          	and    $0xfffffffffffffff0,%rsp
   12d:	41 ff 72 f8          	pushq  -0x8(%r10)
   131:	55                   	push   %rbp
   132:	48 89 e5             	mov    %rsp,%rbp

This is an unusual pattern which aligns rsp (though in this case it's
already aligned) and saves the start_cpu() return address again on the
stack before storing the frame pointer.

The unwinder assumes the last stack frame header is at a certain offset,
but the above code breaks that assumption, resulting in the following
warning:

  WARNING: kernel stack frame pointer at ffffffff82e03f40 in swapper:0 has bad value           (null)

Fix it by checking for the last task stack frame at the aligned offset
in addition to the normal unaligned offset.

Fixes: acb4608a ("x86/unwind: Create stack frames for saved syscall registers")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/9d7b4eb8cf55a7d6002cb738f25c23e7429c99a0.1481904011.git.jpoimboe@redhat.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/1481317061-31486-5-git-send-email-dmitry.torokhov@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Now that i8042 uses flag in legacy platform data, i8042_detect() is
no longer used and can be removed.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/1481317061-31486-4-git-send-email-dmitry.torokhov@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

The error message "Can't read CTR while initializing i8042" appears on
Cherry Trail-based devices at each boot time:

  i8042: PNP: No PS/2 controller found. Probing ports directly.
  i8042: Can't read CTR while initializing i8042
  i8042: probe of i8042 failed with error -5

This happens because we historically do not trust firmware on X86 and,
while noting that PNP does not show keyboard or mouse devices, we still
charge ahead and try to probe the controller. Let's relax this a bit and if
results of PNP probe agree with the results of platform
initialization/quirks conclude that there is, in fact, no i8042.

While at it, let's avoid using x86_platform.i8042_detect() and instead
abort execution early if platform indicates that it can not possibly have
i8042 (x86_platform.legacy.i8042 equals X86_LEGACY_I8042_PLATFORM_ABSENT).
Reported-and-tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/1481317061-31486-3-git-send-email-dmitry.torokhov@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Add i8042 state to the platform data to help i8042 driver make decision
whether to probe for i8042 or not. We recognize 3 states: platform/subarch
ca not possible have i8042 (as is the case with Inrel MID platform),
firmware (such as ACPI) reports that i8042 is absent from the device,
or i8042 may be present and the driver should probe for it.

The intent is to allow i8042 driver abort initialization on x86 if PNP data
(absence of both keyboard and mouse PNP devices) agrees with firmware data.

It will also allow us to remove i8042_detect later.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org
Link: http://lkml.kernel.org/r/1481317061-31486-2-git-send-email-dmitry.torokhov@gmail.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

When CONFIG_PARAVIRT is selected, cpuid() becomes a call. Since
for 32-bit kernels load_ucode_amd_bsp() is executed before paging
is enabled the call cannot be completed (as kernel virtual addresses
are not reachable yet).

Use native_cpuid() instead which is an asm wrapper for the CPUID
instruction.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/1481906392-3847-1-git-send-email-boris.ostrovsky@oracle.com
Link: http://lkml.kernel.org/r/20161218164414.9649-5-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Doing so is completely void of sense for multiple reasons so prevent
it. Set dis_ucode_ldr to true and thus disable the microcode loader by
default to address xen pv guests which execute the AP path but not the
BSP path.

By having it turned off by default, the APs won't run into the loader
either.

Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the
xen pv one. That one gets the aforementioned "fix".

Also, improve the detection method by caching the final decision whether
to continue loading in dis_ucode_ldr and do it once on the BSP. The APs
then simply test that value.
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Juergen Gross <jgross@suse.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-4-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Make it simply return bool to denote whether it found a container or not
and return the pointer to the container and its size in the handed-in
container pointer instead, as returning a struct was just silly.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-3-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Fixup signature and retvals, return the container struct through the
passed in pointer, not as a function return value.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Jürgen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: http://lkml.kernel.org/r/20161218164414.9649-2-bp@alien8.deSigned-off-by: Thomas Gleixner <tglx@linutronix.de>

Pull RTC updates from Alexandre Belloni:
  "Subsystem:
   - non-modular drivers are now explicitly non-modular

  New driver:
    - Epson Toyocom rtc-7301sf/dg

  Drivers:
   - cmos: reject unsupported alarm values wrt the RTC capabilities
   - ds1307: ACPI support
   - jz4740: DT support, jz4780 handling, can now be used as a system
     power controller
   - mcp795: many fixes, in particular proper month handling
   - twl: driver is now DT only"

* tag 'rtc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits)
  rtc: mcp795: Fix whitespace and indentation.
  rtc: mcp795: Prefer using the BIT() macro.
  rtc: mcp795: fix month write resetting date to 1.
  rtc: mcp795: fix time range difference between linux and RTC chip.
  rtc: mcp795: fix bitmask value for leap year (LP).
  rtc: mcp795: use bcd2bin/bin2bcd.
  rtc: add support for EPSON TOYOCOM RTC-7301SF/DG
  rtc: ds1307: Add ACPI support
  rtc: imxdi: (trivial) fix a typo
  rtc: ds1374: Merge conditional + WARN_ON()
  rtc: twl: make driver DT only
  rtc: twl: kill static variables
  rtc: fix typos in Kconfig
  rtc: jz4740: make the driver builtin only
  rtc: jz4740: remove unused EXPORT_SYMBOL
  Documentation: bindings: fix twl-rtc documentation
  rtc: Enable compile testing for Maxim and Samsung drivers
  MIPS: jz4740: Remove obsolete code
  MIPS: qi_lb60: Probe RTC driver from DT and use it as power controller
  MIPS: jz4740: DTS: Probe the jz4740-rtc driver from devicetree
  ...

Fix whitespace and indentation errors and the following
checkpatch warnings:
- line 15: Block comments use a trailing */ on a separate line
- line 256: Line over 80 characters
No code change.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch doesn't change the code but replaces all bitmask values
with the BIT(x) macro.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According to Microchip errata some combinations of date and month
values may result in the date being reset to 1, even if the date
is also written with the month (for example 31-07 or 31-08).
As a workaround avoid writing date and month values within the same
Write command. Instead, terminate the Write command after loading
the date and begin a new command to write the month. In addition,
disable the oscillator before loading the new values. This is done
by ensuring both the ST and EXTOSC bits are cleared and waiting for
the OSCON bit to clear.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

In linux rtc_time struct, tm_mon range is 0~11, while in RTC HW REG,
month range is 1~12. This patch adjusts difference of them.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

According the datasheet the leap year is a fifth bit in month register.
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Change rtc-mcp795.c to use the bcd2bin/bin2bcd functions.
This change fixes the wrong conversion of month value
from binary to BCD (missing right shift operation for 10 month).
Signed-off-by: Emil Bartczak <emilbart@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This adds support for EPSON TOYOCOM RTC-7301SF/DG which has parallel
interface compatible with SRAM.

This driver supports basic clock, calendar and alarm functionality.

Tested with Microblaze linux running on Artix7 FPGA board with my own
custom IP for RTC-7301.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

This patch enables ACPI support for rtc-ds1307 driver.
Signed-off-by: Tin Huynh <tnhuynh@apm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Pull libnvdimm updates from Dan Williams:
 "The libnvdimm pull request is relatively small this time around due to
  some development topics being deferred to 4.11.

  As for this pull request the bulk of it has been in -next for several
  releases leading to one late fix being added (commit 868f036f
  ("libnvdimm: fix mishandled nvdimm_clear_poison() return value")). It
  has received a build success notification from the 0day-kbuild robot
  and passes the latest libnvdimm unit tests.

  Summary:

   - Dynamic label support: To date namespace label support has been
     limited to disambiguating cases where PMEM (direct load/store) and
     BLK (mmio aperture) accessed-capacity alias on the same DIMM. Since
     4.9 added support for multiple namespaces per PMEM-region there is
     value to support namespace labels even in the non-aliasing case.
     The presence of a valid namespace index block force-enables label
     support when the kernel would otherwise rely on region boundaries,
     and permits the region to be sub-divided.

   - Handle media errors in namespace metadata: Complement the error
     handling for media errors in namespace data areas with support for
     clearing errors on writes, and downgrading potential machine-check
     exceptions to simple i/o errors on read.

   - Device-DAX region attributes: Add 'align', 'id', and 'size' as
     attributes for device-dax regions. In particular this enables
     userspace tooling to generically size memory mapping and i/o
     operations. Prevent userspace from growing assumptions /
     dependencies about the parent device topology for a dax region. A
     libnvdimm namespace may not always be the parent device of a dax
     region.

   - Various cleanups and small fixes"

* tag 'libnvdimm-for-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: add region 'id', 'size', and 'align' attributes
  libnvdimm: fix mishandled nvdimm_clear_poison() return value
  libnvdimm: replace mutex_is_locked() warnings with lockdep_assert_held
  libnvdimm, pfn: fix align attribute
  libnvdimm, e820: use module_platform_driver
  libnvdimm, namespace: use octal for permissions
  libnvdimm, namespace: avoid multiple sector calculations
  libnvdimm: remove else after return in nsio_rw_bytes()
  libnvdimm, namespace: fix the type of name variable
  libnvdimm: use consistent naming for request_mem_region()
  nvdimm: use the right length of "pmem"
  libnvdimm: check and clear poison before writing to pmem
  tools/testing/nvdimm: dynamic label support
  libnvdimm: allow a platform to force enable label support
  libnvdimm: use generic iostat interfaces

Merge tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull more x86 platform driver updates from Darren Hart:
 "Move and add registration for the mlx-platform driver. Introduce
  button and lid drivers for the surface3 (different from the
  surface3-pro). Add BXT PMIC TMU support. Add Y700 to existing
  ideapad-laptop quirk.

  Summary:

  ideapad-laptop:
   - Add Y700 15-ACZ to no_hw_rfkill DMI list

  surface3_button:
   - Introduce button support for the Surface 3

  surface3-wmi:
   - Add custom surface3 platform device for controlling LID
   - Balance locking on error path

  mlx-platform:
   - Add mlxcpld-hotplug driver registration
   - Fix semicolon.cocci warnings
   - Move module from arch/x86

  platform/x86:
   - Add Whiskey Cove PMIC TMU support"

* tag 'platform-drivers-x86-v4.10-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  platform/x86: surface3-wmi: Balance locking on error path
  platform/x86: Add Whiskey Cove PMIC TMU support
  platform/x86: ideapad-laptop: Add Y700 15-ACZ to no_hw_rfkill DMI list
  platform/x86: Introduce button support for the Surface 3
  platform/x86: Add custom surface3 platform device for controlling LID
  platform/x86: mlx-platform: Add mlxcpld-hotplug driver registration
  platform/x86: mlx-platform: Fix semicolon.cocci warnings
  platform/x86: mlx-platform: Move module from arch/x86

There is a possibility that lock will be left acquired.
Consolidate error path under out_free_unlock label.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds TMU (Time Management Unit) support for Intel BXT platform.
It enables the alarm wake-up functionality in the TMU unit of Whiskey Cove
PMIC.
Signed-off-by: Nilesh Bacchewar <nilesh.bacchewar@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[andy: resolve merge conflict in Kconfig]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull timer updates from Thomas Gleixner:
 "This is the last functional update from the tip tree for 4.10. It got
  delayed due to a newly reported and anlyzed variant of BIOS bug and
  the resulting wreckage:

   - Seperation of TSC being marked realiable and the fact that the
     platform provides the TSC frequency via CPUID/MSRs and making use
     for it for GOLDMONT.

   - TSC adjust MSR validation and sanitizing:

     The TSC adjust MSR contains the offset to the hardware counter. The
     sum of the adjust MSR and the counter is the TSC value which is
     read via RDTSC.

     On at least two machines from different vendors the BIOS sets the
     TSC adjust MSR to negative values. This happens on cold and warm
     boot. While on cold boot the offset is a few milliseconds, on warm
     boot it basically compensates the power on time of the system. The
     BIOSes are not even using the adjust MSR to set all CPUs in the
     package to the same offset. The offsets are different which renders
     the TSC unusable,

     What's worse is that the TSC deadline timer has a HW feature^Wbug.
     It malfunctions when the TSC adjust value is negative or greater
     equal 0x80000000 resulting in silent boot failures, hard lockups or
     non firing timers. This looks like some hardware internal 32/64bit
     issue with a sign extension problem. Intel has been silent so far
     on the issue.

     The update contains sanity checks and keeps the adjust register
     within working limits and in sync on the package.

     As it looks like this disease is spreading via BIOS crapware, we
     need to address this urgently as the boot failures are hard to
     debug for users"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Limit the adjust value further
  x86/tsc: Annotate printouts as firmware bug
  x86/tsc: Force TSC_ADJUST register to value >= zero
  x86/tsc: Validate TSC_ADJUST after resume
  x86/tsc: Validate cpumask pointer before accessing it
  x86/tsc: Fix broken CONFIG_X86_TSC=n build
  x86/tsc: Try to adjust TSC if sync test fails
  x86/tsc: Prepare warp test for TSC adjustment
  x86/tsc: Move sync cleanup to a safe place
  x86/tsc: Sync test only for the first cpu in a package
  x86/tsc: Verify TSC_ADJUST from idle
  x86/tsc: Store and check TSC ADJUST MSR
  x86/tsc: Detect random warps
  x86/tsc: Use X86_FEATURE_TSC_ADJUST in detect_art()
  x86/tsc: Finalize the split of the TSC_RELIABLE flag
  x86/tsc: Set TSC_KNOWN_FREQ and TSC_RELIABLE flags on Intel Atom SoCs
  x86/tsc: Mark Intel ATOM_GOLDMONT TSC reliable
  x86/tsc: Mark TSC frequency determined by CPUID as known
  x86/tsc: Add X86_FEATURE_TSC_KNOWN_FREQ flag

Pull x86 fixes and cleanups from Thomas Gleixner:
 "This set of updates contains:

   - Robustification for the logical package managment. Cures the AMD
     and virtualization issues.

   - Put the correct start_cpu() return address on the stack of the idle
     task.

   - Fixups for the fallout of the nodeid <-> cpuid persistent mapping
     modifciations

   - Move the x86/MPX specific mm_struct member to the arch specific
     mm_context where it belongs

   - Cleanups for C89 struct initializers and useless function
     arguments"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/floppy: Use designated initializers
  x86/mpx: Move bd_addr to mm_context_t
  x86/mm: Drop unused argument 'removed' from sync_global_pgds()
  ACPI/NUMA: Do not map pxm to node when NUMA is turned off
  x86/acpi: Use proper macro for invalid node
  x86/smpboot: Prevent false positive out of bounds cpumask access warning
  x86/boot/64: Push correct start_cpu() return address
  x86/boot/64: Use 'push' instead of 'call' in start_cpu()
  x86/smpboot: Make logical package management more robust

Pull timer fix from Thomas Gleixner:
 "Prevent NULL pointer dereferencing in the tick broadcast code. Old
  bug, which got unearthed by the hotplug ordering problem"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick/broadcast: Prevent NULL pointer dereference