- 07 Jun, 2023 6 commits
-
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a85ccc8c0f451fcb997b4ac138dbeba2a653cebe.1685119007.git.jani.nikula@intel.com
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The vbp is not used for anything in the readout, as we get e.g. crtc_vtotal from BXT_MIPI_TRANS_VTOTAL. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The intel_dp variable has been unused since commit ef79fafe ("drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl,status}"). Signed-off-by:
-
Jani Nikula authored
We assume the plane offset is 0. Warn if it's not. This also fixes a warn on unused but set variable offset. v2: initialize offset on the gen2/3 path (Ville) Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Only the EDID code and sysfs should look at the EDID property. Stop using it. Signed-off-by:
-
- 05 Jun, 2023 6 commits
-
-
Matt Roper authored
If i915_driver_create() fails to create a valid 'i915' object, we should just disable the PCI device and return immediately without trying to call i915_probe_error() that relies on a valid i915 pointer. Fixes: 12e6f6dc ("drm/i915/display: Handle GMD_ID identification in display code") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/55236f93-dcc5-481e-b788-9f7e95b129d8@kili.mountain/Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230601173804.557756-1-matthew.d.roper@intel.com
-
Matt Roper authored
Moving display-specific runtime info initialization into display/ makes the display code more self-contained and also makes it easier to call from the Xe driver. v2: - Drop unnecessary display/ prefix from #includes. (Jani) - Clear runtime info if fusing leaves no pipes remaining, the same as we do when fusing indicates the entire display controller is unavailable. (Jani) - Move adjustment of DRIVER_MODESET / DRIVER_ATOMIC after call to intel_display_device_info_runtime_init(); HAS_DISPLAY may have changed to false during the runtime init. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Apparently desktop gen3 parts don't support the 10bit gamma mode at all. Stop claiming otherwise. As is the case with pipe A on gen3 mobile parts, the PIPECONF gamma mode bit can be set but it has no effect on the output. PNV seems to be the only slight exception, but generally the desktop PNV variant looks more like a mobile part so this is not entirely surprising. Fixes: 67630bac ("drm/i915: Add 10bit gamma mode for gen2/3") Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531135625.3467-1-ville.syrjala@linux.intel.com
-
Arun R Murthy authored
For modifier not supporting async flip, print the modifier and display version. Helps in reading the error message. v2: Reframe the error message (Jani) Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
-
Mika Kahola authored
In case when only two or less transmit lanes are owned such as MFD (DP-alt with x2 lanes) we need to reset only one data lane (lane0). With only x2 lanes we don't need to poll for the phy current status on both data lanes since only the owned data lane will respond. v2: Find better naming for lanes and revise the commit message (Luca) Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1) Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> (v2) Signed-off-by:
-
Jouni Högander authored
HW default for wake sync pulses is 18. 10 precharge and 8 preamble. There is no reason to change this especially as it is causing problems with certain eDP panels. v3: Change "Fixes:" commit v2: Remove "fast wake" repeat from subject Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530101649.2549949-1-jouni.hogander@intel.com
-
- 02 Jun, 2023 17 commits
-
-
Chaitanya Kumar Borah authored
According to Bspec, the voltage level for 480MHz is to be set as 1 instead of 2. BSpec: 49208 Fixes: 06f1b06d ("drm/i915/display: Add 480 MHz CDCLK steps for RPL-U") v2: rebase Signed-off-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
When intel_dp_init_connector fails, some power wells used in dp aux communication may not be completely disabled yet. This may result in a null pointer dereference when icl_aux_pw_to_phy() is called from icl_combo_phy_aux_power_well_disable() after the encoder and connector are already freed. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
enum i915_drm_suspend_mode suspend_mode is only used in intel_display_power, while we only care about whether we perform a s2idle. Remove it and use a simple bool. v2: Rebase Signed-off-by:
-
Sui Jingfeng authored
'rbiter' -> 'arbiter' Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
-
Jani Nikula authored
Convert the remaining uses of struct edid based drm_get_edid(), drm_connector_update_edid_property() and drm_add_edid_modes() calls to the struct drm_edid based drm_edid_read_ddc(), drm_edid_connector_update() and drm_edid_connector_add_modes(). Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Jani Nikula authored
Convert the topology manager to use struct drm_edid, add drm_dp_mst_edid_read() that returns drm_edid, and rewrite the old drm_dp_mst_get_edid() to use it. Note that the old drm_get_edid() ended up calling drm_connector_update_edid_property(). This responsibility is now deferred to drivers, which all do it anyway after calling drm_dp_mst_edid_read() or drm_dp_mst_get_edid(). Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Jani Nikula authored
It's a bit tedious to check for NULL before calling drm_edid_duplicate(). Make it handle NULL parameter graciously. Reviewed-by:
-
Jani Nikula authored
Use drm_edid_read_switcheroo() to switch from struct edid to struct drm_edid. Reviewed-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Jani Nikula authored
Add a switcheroo variant to the struct drm_edid based EDID read functions. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Add intel_dp_has_hdmi_sink() helper to access it. v2: Rebased Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
Jani Nikula authored
Caching the has_audio in struct drm_dp_mst_port seems odd, and oddly placed. Defer audio handling to drivers, and use the info from the connector display info. i915 was the only one using it anyway. Reviewed-by:
-
Jani Nikula authored
Since we already iterate everything that's needed for determining audio, reduce the need to call drm_detect_monitor_audio() by storing has_audio to connector info. Reviewed-by:
-
- 31 May, 2023 5 commits
-
-
Jani Nikula authored
Use localized __diag_push(), __diag_ignore_all() with rationale, and __diag_pop() for specific initializations instead of blanket disabling of -Woverride-init across several files. Signed-off-by:
-
Jani Nikula authored
Sync the drm-intel-gt-next changes back to drm-intel-next via drm-next. Signed-off-by: -
Suraj Kandpal authored
Rename comp_mutex to hdcp_mutex as it does not just protect component related variables which was a terminology used when hdcp was to be binded as a mei component from MTL we use gsc cs which does not use the component binding path for HDCP. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Suraj Kandpal <suraj.kandpal@intel.com> Reviewed-by:
-
Suraj Kandpal authored
Rename variables to move away from master convention to arbiter %s/hdcp.master/hdcp.arbiter %s/i915_hdcp_master/i915_hdcp_arbiter %s/comp_master/comp_arbiter --v2 - delete i915_hdcp_comp_master redundant declaration [Chaitanya] - use %s/foo/bar/ format in commit message to show changes [Chaitanya] --v3 - replace i915_hdcp_comp_master declaration with i915_hdcp_arbiter to avoid any compile fail with old compilers [Chaitanya] Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Suraj Kandpal authored
Rename dev_priv to i915 to keep up with latest code standards. Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 28 May, 2023 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-gt-next-2023-05-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next UAPI Changes: - New getparam for querying PXP support and load status Cross-subsystem Changes: - GSC/MEI proxy driver Driver Changes: Fixes/improvements/new stuff: - Avoid clearing pre-allocated framebuffers with the TTM backend (Nirmoy Das) - Implement framebuffer mmap support (Nirmoy Das) - Disable sampler indirect state in bindless heap (Lionel Landwerlin) - Avoid out-of-bounds access when loading HuC (Lucas De Marchi) - Actually return an error if GuC version range check fails (John Harrison) - Get mutex and rpm ref just once in hwm_power_max_write (Ashutosh Dixit) - Disable PL1 power limit when loading GuC firmware (Ashutosh Dixit) - Block in hwmon while waiting for GuC reset to complete (Ashutosh Dixit) - Provide sysfs for SLPC efficient freq (Vinay Belgaumkar) - Add support for total context runtime for GuC back-end (Umesh Nerlige Ramappa) - Enable fdinfo for GuC backends (Umesh Nerlige Ramappa) - Don't capture Gen8 regs on Xe devices (John Harrison) - Fix error capture for virtual engines (John Harrison) - Track patch level versions on reduced version firmware files (John Harrison) - Decode another GuC load failure case (John Harrison) - GuC loading and firmware table handling fixes (John Harrison) - Fix confused register capture list creation (John Harrison) - Dump error capture to kernel log (John Harrison) - Dump error capture to dmesg on CTB error (John Harrison) - Disable rps_boost debugfs when SLPC is used (Vinay Belgaumkar) Future platform enablement: - Disable stolen memory backed FB for A0 [mtl] (Nirmoy Das) - Various refactors for multi-tile enablement (Andi Shyti, Tejas Upadhyay) - Extend Wa_22011802037 to MTL A-step (Madhumitha Tolakanahalli Pradeep) - WA to clear RDOP clock gating [mtl] (Haridhar Kalvala) - Set has_llc=0 [mtl] (Fei Yang) - Define MOCS and PAT tables for MTL (Madhumitha Tolakanahalli Pradeep) - Add PTE encode function [mtl] (Fei Yang) - fix mocs selftest [mtl] (Fei Yang) - Workaround coherency issue for Media [mtl] (Fei Yang) - Add workaround 14018778641 [mtl] (Tejas Upadhyay) - Implement Wa_14019141245 [mtl] (Radhakrishna Sripada) - Fix the wa number for Wa_22016670082 [mtl] (Radhakrishna Sripada) - Use correct huge page manager for MTL (Jonathan Cavitt) - GSC/MEI support for Meteorlake (Alexander Usyskin, Daniele Ceraolo Spurio) - Define GuC firmware version for MTL (John Harrison) - Drop FLAT CCS check [mtl] (Pallavi Mishra) - Add MTL for remapping CCS FBs [mtl] (Clint Taylor) - Meteorlake PXP enablement (Alan Previn) - Do not enable render power-gating on MTL (Andrzej Hajda) - Add MTL performance tuning changes (Radhakrishna Sripada) - Extend Wa_16014892111 to MTL A-step (Radhakrishna Sripada) - PMU multi-tile support (Tvrtko Ursulin) - End support for set caching ioctl [mtl] (Fei Yang) Driver refactors: - Use i915 instead of dev_priv insied the file_priv structure (Andi Shyti) - Use proper parameter naming in for_each_engine() (Andi Shyti) - Use gt_err for GT info (Tejas Upadhyay) - Consolidate duplicated capture list code (John Harrison) - Capture list naming clean up (John Harrison) - Use kernel-doc -Werror when CONFIG_DRM_I915_WERROR=y (Jani Nikula) - Preparation for using PAT index (Fei Yang) - Use pat_index instead of cache_level (Fei Yang) Miscellaneous: - Fix memory leaks in i915 selftests (Cong Liu) - Record GT error for gt failure (Tejas Upadhyay) - Migrate platform-dependent mock hugepage selftests to live (Jonathan Cavitt) - Update the SLPC selftest (Vinay Belgaumkar) - Throw out set() wrapper (Jani Nikula) - Large driver kernel doc cleanup (Jani Nikula) - Fix probe injection CI failures after recent change (John Harrison) - Make unexpected firmware versions an error in debug builds (John Harrison) - Silence UBSAN uninitialized bool variable warning (Ashutosh Dixit) - Fix memory leaks in function live_nop_switch (Cong Liu) Merges: - Merge drm/drm-next into drm-intel-gt-next (Joonas Lahtinen) Signed-off-by:
Dave Airlie <airlied@redhat.com> # Conflicts: # drivers/gpu/drm/i915/gt/uc/intel_guc_capture.c From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZG5SxCWRSkZhTDtY@tursulin-desk
-
- 26 May, 2023 5 commits
-
-
Ville Syrjälä authored
VLV has a so called "wide gamut color correction" unit (WGC). What it is is a 3x3 matrix similar to the later CHV CGM CSC, with less precisions/range. In fact CHV also has the WGC but using it there doesn't really make sense when you have the superior CGM CSC around. Hook up the necessary stuff to expose the WGC as the CTM crtc property. One additional crazy idea that came to mind would be to use the WGC as an output CSC on CHV for YCbCr output. But it would be incompatible with the legacy LUT usage. In fact since the WGC lacks post-offsets we'd probably have to use the legacy LUT to do that final part of the RGB->YCbCr conversion. Sounds doable, but perhaps not worth the hassle. Signed-off-by:
-
Ville Syrjälä authored
On CHV toggling the CGM CSC on/off while the pipe is running leads to underruns. Looks like we'd have to do the toggling strictly inside the start_of_vblank-frame_start window to avoid this, but that window is less than a scanline so there's no way we can guarantee hitting it. As a workaround let's just leave the CGM CSC permanently enabled. Fortunately the CGM gamma/degamma units don't seem to suffer from this malady. I also tried turning off CGM unit clock gating, but that did not help. Signed-off-by:
-
Ville Syrjälä authored
The CHV CGM CSC coefficients are in s4.12 two's complement format. Fix the CTM->CGM conversion to handle that correctly instead of pretending that the hw coefficients are also in some sign-magnitude format. Signed-off-by:
-
Ville Syrjälä authored
The ilk/snb code is internally fully capable of handling the CTM property, so expose it. Note that we still choose not to expose DEGAMMA_LUT though. The hardware is capable if degamma or gamma, but not both simultanously due to lack of the split gamma mode. Exposing both LUTs might encourage userspace to try enabling both at the same time. Signed-off-by:
-
Nathan Chancellor authored
Clang warns: drivers/gpu/drm/i915/display/intel_display.c:6012:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] case I915_FORMAT_MOD_X_TILED: ^ drivers/gpu/drm/i915/display/intel_display.c:6012:3: note: insert 'break;' to avoid fall-through case I915_FORMAT_MOD_X_TILED: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Fixes: 93785948 ("drm/i915: Support Async Flip on Linear buffers") Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/202305241902.UvHtMoxa-lkp@intel.com/Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/CA+G9fYv68V3ewK0Qj-syQj7qX-hQr0H1MFL=QFNuDoE_J2Zu-g@mail.gmail.com/Reported-by:
Tom Rix <trix@redhat.com> Closes: https://lore.kernel.org/all/20230523125116.1669057-1-trix@redhat.com/Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
-
