- 05 Jul, 2011 4 commits
-
-
Sebastian Andrzej Siewior authored
Fix the following compile warning: | usb/gadget/ci13xxx_udc.c: In function 'show_registers': | usb/gadget/ci13xxx_udc.c:1242:1: warning: the frame size of 2064 bytes is larger than 1024 bytes Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Felipe Balbi <balbi@ti.com>
-
Felipe Balbi authored
This patch fixes the following compile warnings: drivers/usb/gadget/net2272.c: In function ‘net2272_kick_dma’: drivers/usb/gadget/net2272.c:740:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 6 has type ‘dma_addr_t’ [-Wformat] drivers/usb/gadget/net2272.c: In function ‘net2272_queue’: drivers/usb/gadget/net2272.c:859:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 8 has type ‘dma_addr_t’ [-Wformat] Signed-off-by: -
Felipe Balbi authored
This patch fixes the following compile warnings: drivers/usb/gadget/langwell_udc.c: In function ‘queue_dtd’: drivers/usb/gadget/langwell_udc.c:596:2: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] drivers/usb/gadget/langwell_udc.c: In function ‘langwell_udc_probe’: drivers/usb/gadget/langwell_udc.c:3274:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] drivers/usb/gadget/langwell_udc.c:3289:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] drivers/usb/gadget/langwell_udc.c: In function ‘langwell_udc_resume’: drivers/usb/gadget/langwell_udc.c:3473:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] drivers/usb/gadget/langwell_udc.c:3487:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] Signed-off-by: -
Felipe Balbi authored
that code has been dead forever. Since the first commit (0fe6f1d1) the use of that code has been commented out. Let's drop the dead code already and fix the following compile warning: | drivers/usb/gadget/fusb300_udc.c: At top level: | drivers/usb/gadget/fusb300_udc.c:771:13: warning: ‘fusb300_wrfifo’ defined but not used [-Wunused-function] | drivers/usb/gadget/fusb300_udc.c:1027:13: warning: ‘fusb300_set_ep_bycnt’ defined but not used [-Wunused-function] Signed-off-by:
-
- 01 Jul, 2011 36 commits
-
-
edwin_rong authored
The autosuspend function can be disabled by unchecking the Macro CONFIG_REALTEK_AUTOPM in kernel config file, by default, this macro is turned on. Signed-off-by:
edwin_rong <edwin_rong@realsil.com.cn> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
edwin_rong authored
Remove Macros wait_timeout() and wait_timeout_x(). Signed-off-by:
-
edwin_rong authored
Signed-off-by:
-
Viliam Mateicka authored
There is a bug in Samsung's UDC driver, which is completely disabling the USB device when a custom UDC command is used. Following patch seems to get the right behavior (e.g. enabling pull-up instead of disabling then Vcc is applied). Signed-off-by:
Viliam Mateicka <viliam.mateicka@gmail.com> Signed-off-by:
-
Tatyana Brokhman authored
A compilation warning was added by the patch "usb: gadget: use config_ep_by_speed() instead of ep_choose()". This patch fixed it. Signed-off-by:
Tatyana Brokhman <tlinder@codeaurora.org> Signed-off-by:
-
Moiz Sonasath authored
With this commit: cccad6d4 usb: otg: notifier: switch to atomic notifier Following dumps are observed on attach/detach for MUSB HOST mode and on a detach for MUSB Device mode. BUG: sleeping function called from invalid context at kernel/mutex.c:85 where, the source is: twl6030_usb_irq ->atomic_notifier_call_chain ->musb_otg_notifications ->twl6030_set_vbus ->twl_i2c_write_u8 ->mutex_lock This patch moves the i2c writes in set_vbus function to a work-queue thereby avoiding I2C writes in atomic context. Tested HOST and Device mode functionality on OMAP4460 Signed-off-by:
Moiz Sonasath <m-sonasath@ti.com> Signed-off-by:
-
Jassi Brar authored
The config bind was reported success even if usb_add_function failed. Fix the return value. Signed-off-by:
Jassi Brar <jaswinder.singh@linaro.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Bob Liu authored
The recent commit 2edb11cb fixed req->length in the composite_setup() function, but that will cause all g_zero tests to fail like: root#> ./testusb -D /proc/bus/usb/002/021 -t14 -c 15000 -s 256 -v 1 unknown speed /proc/bus/usb/002/021 /proc/bus/usb/002/021 test 14 --> 32 (Broken pipe) We need to fix req->length in sourcesink_setup() as well to avoid this. Signed-off-by:
Bob Liu <lliubbo@gmail.com> Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Tobias Klauser authored
Use ASCII minus sign instead of unicode EN DASH in gadget_hid.txt. Also remove two unecessary spaces in the same file. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited() Signed-off-by:
Manuel Zerpies <manuel.f.zerpies@ww.stud.uni-erlangen.de> Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited() Signed-off-by:
-
Manuel Zerpies authored
Since printk_ratelimit() shouldn't be used anymore (see comment in include/linux/printk.h), replace it with printk_ratelimited() Signed-off-by:
-
Felipe Balbi authored
dev_get_drvdata() is exactly the same as platform_get_drvdata(). Drop that useless access to the platform device. Signed-off-by:
-
Felipe Balbi authored
there's no point in not creating that device always. It's simpler to always create, than to keep changing that stupid ifdef. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This was somehow forgotten. Signed-off-by:
-
Sebastian Andrzej Siewior authored
bind() and pull is moved to udc core, call callbacks are verified by the upper layer. Signed-off-by:
-
Sebastian Andrzej Siewior authored
udc-core checks for valid callbacks so there is no need for the driver to do so. Also "can-be-bound-once" is verified by udc-core. The pull-up callback is called by udc-core afterwords. [ balbi@ti.com : keep holding gadget_driver pointer for now remove the stupid check for gadget_driver otherwise we don't handle IRQs ] Signed-off-by:
-
Sebastian Andrzej Siewior authored
udc_start() should only trigger the internal state machine and make minimal house keeping. Before that call udc-core calls the bind() callback and after the callback the pullup(). udc_stop() is simillar, udc-core calls pullup(), unbind() and finally udc_stop(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
The configuration is static however we only know the speed after we have connected with the other side. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This value is now assigned during bind(). The configuration depends on static values assigned by dummy driver itself. So there is no need to defer this assigment until one know the actuall speed since the configuration is static and known early. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This is only required to be done once. There is no counter part to this in ->stop() so there is no need to re-do it next time. While here also init the max_stream size to 0 on SS speed. Signed-off-by:
-
Sebastian Andrzej Siewior authored
maxpacket is set by the udc driver for ep0 very early. This value is copied by the function gadget used later for the USB_DT_DEVICE and USB_DT_DEVICE_QUALIFIER query. This seems to work fine so far. For USB3 we need set a different value here. In SS speed it is 2^x with x=9 and in HS we set something <= 64. If the UDC starts in SS and continues in HS after the cable has been plugged it will report a too small value. There setting of this value is defered and taken automaticly from the ep0 pointer where the UDC driver can update it according to the speed it detected _after_ a cable has been plugged. Signed-off-by:
-
Felipe Balbi authored
now that we have the udc class, we can allow multiple gadget controller drivers to be compiled as modules. This will allow for distro-like kernels for embedded devices. With this patch, I managed to build an x86 kernel with support for many of the controllers enabled: CONFIG_USB_FUSB300=m CONFIG_USB_R8A66597=m CONFIG_USB_M66592=m CONFIG_USB_AMD5536UDC=m CONFIG_USB_CI13XXX_PCI=m CONFIG_USB_NET2272=m CONFIG_USB_NET2280=m CONFIG_USB_GOKU=m CONFIG_USB_LANGWELL=m CONFIG_USB_EG20T=m Also an ARM kernel with support for many controllers: CONFIG_USB_FUSB300=m CONFIG_USB_OMAP=m CONFIG_USB_R8A66597=m CONFIG_USB_GADGET_MUSB_HDRC=m CONFIG_USB_M66592=m CONFIG_USB_NET2272=m CONFIG_USB_DUMMY_HCD=m The next step would be to get rid of the direct access to arch/ and mach/ directories on some gadget controllers so that we can build all of them without depending on their respective ARCH_* symbols. Signed-off-by:
-
Felipe Balbi authored
When we start building glue layers as modules, we need to be careful with the fifo_mode changes otherwise that weird ifdeferry won't evaluate correctly. Add the missing _MODULE variants for all glue layers to prevent everybody from using fifo_mode 2. Signed-off-by:
-
Felipe Balbi authored
the MUSB IP is always OTG, so there's no point in adding so many ifdefs on the code. Drop those and always compile the driver for OTG support. This also allows us to drop the useless "driver mode" choice. For doing that, we need to make musb depend on both Host and Peripheral side. Signed-off-by:
-
Felipe Balbi authored
if we have more endpoints configured than enabled on fifo_mode, then we need to be careful on save/restore context operations, otherwise we will try to access uninitialized __iomem pointer. Signed-off-by:
-
Sebastian Andrzej Siewior authored
Signed-off-by:
-
Sebastian Andrzej Siewior authored
This function has no user in my tree. It looks like it belongs to net2280 but it somehow morphed into the dummy_hcd. So I remove it before it spreads into more drivers. After some digging I figured out that the only user was removed in |commit 9079e91b |Author: David Brownell <david-b@pacbell.net> |Date: Wed May 7 16:00:36 2008 -0700 | | USB: serial gadget: cleanup/reorg Signed-off-by:
-
Sebastian Andrzej Siewior authored
Taking the correct struct once avoids doing the speed dance. Signed-off-by:
-
Sebastian Andrzej Siewior authored
gadget_to_dummy_hcd() already does the speed check, so it's unnecessary to unroll that all the time. Signed-off-by:
-
Sebastian Andrzej Siewior authored
Before commit 53832daea ("usb: gadget: dummy_hcd: use the shared_hcd infrastructure") the is_otg field was set in dummy_udc_probe(). It seems to me that this field is used in gadget's bind function. Therefore I'm moving it before the bind() callback is called. Cc: Tatyana Brokhman <tlinder@codeaurora.org Signed-off-by: -
Sebastian Andrzej Siewior authored
The removed code does the same thing as dummy_pullup(). The only difference is that in dummy_udc_stop() the first dummy_pullup() did not call usb_hcd_poll_rh_status(). Signed-off-by:
-
Sergei Shtylyov authored
When #include'd alone, <linux/usb/gadget.h> causes a lot of compilation errors and warnings -- all because it relies on the including code to bring in the necessary #include's instead of doing this itself. Signed-off-by:
Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Felipe Balbi authored
the gadget controller number is only used during bind() to update descriptors and/or check that a particular controller can support a particular gadget driver. Because of that, we can remove the ifdef trickery as it's a rather small optimization anyway. While at that, also sort the entries alphabetically and add a comment stating we want to keep the list ordered alphabetically. Signed-off-by:
-
