The xilinx-xadc IIO driver currently has support for the XADC in the Xilinx
7 series FPGAs. The system-monitor is the equivalent to the XADC in the
Xilinx UltraScale and UltraScale+ FPGAs.

The IP designers did a good job at maintaining backwards compatibility and
only minor changes are required to add basic support for the system-monitor
core.

The non backwards compatible changes are:
  * Register map offset was moved from 0x200 to 0x400
  * Only one ADC compared to two in the XADC
  * 10 bit ADC instead of 12 bit ADC
  * Two of the channels monitor different supplies

Add the necessary logic to accommodate these changes to support the
system-monitor in the XADC driver.

Note that this patch does not include support for some new features found
in the system-monitor like additional alarms, user supply monitoring and
secondary system-monitor access. This might be added at a later time.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Anand Ashok Dumbre <anandash@xilinx.com>
Reviewed-by: Anand Ashok Dumbre <anandash@xilinx.com>
Link: https://lore.kernel.org/r/20200922134624.13191-2-lars@metafoo.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Add binding documentation for the Xilinx System Management Wizard. The
Xilinx System Management Wizard is a AXI frontend for the Xilinx System
Monitor found in the UltraScale and UltraScale+ FPGAs.

The System Monitor is the equivalent to the Xilinx XADC found in their
previous generation of FPGAs and their external and internal interfaces are
very similar. For this reason the share the same binding documentation. But
since they are not 100% compatible and software will have to know about the
differences they use a different compatible string.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20200922134624.13191-1-lars@metafoo.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

visorhba uses kthread to obtain the responses from the IO
Service Partition periodically, on the other hand, visorbus
provides periodic work to serve such request, therefore,
kthread should be replaced by channel_interrupt.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Link: https://lore.kernel.org/r/1609923863-6650-1-git-send-email-chensong_2000@189.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Smatch found a local variable that can get copied to another
local variable without an initializion in the error case:

 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c:1056 vchiq_get_user_ptr() error: uninitialized symbol 'ptr'.

This seems harmless, as the function should normally get inlined, with
the output directly written or not. In any case, the uninitialized data
is never used after get_user() fails.

As Dan mentions, it could still trigger an UBSAN runtime error, and it
is of course a bad idea to copy uninitialized variables, so just
bail out early.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210105135256.1810337-1-arnd@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Record in the TODO file that the address of "&waiter->bulk_waiter"
should never be returned to userspace.
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-4-phil@raspberrypi.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The recent change to the bulk transfer compat function missed the fact
the relevant ioctl command is VCHIQ_IOC_QUEUE_BULK_TRANSMIT32, not
VCHIQ_IOC_QUEUE_BULK_TRANSMIT, as any attempt to send a bulk block
to the VPU would have shown.

Fixes: a4367cd2 ("staging: vchiq: convert compat bulk transfer")
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-3-phil@raspberrypi.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The addition of the local 'userdata' pointer to
vchiq_irq_queue_bulk_tx_rx omitted the case where neither BLOCKING nor
WAITING modes are used, in which case the value provided by the
caller is not returned to them as expected, but instead it is replaced
with a NULL. This lack of a suitable context may cause the application
to crash or otherwise malfunction.

Fixes: 4184da4f ("staging: vchiq: fix __user annotations")
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20210105162030.1415213-2-phil@raspberrypi.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Without crc32 support, the drivers fail to link:

ERROR: modpost: "crc32_le" [drivers/staging/rtl8192e/rtllib_crypt_wep.ko] undefined!
ERROR: modpost: "crc32_le" [drivers/staging/rtl8192e/rtllib_crypt_tkip.ko] undefined!
ERROR: modpost: "crc32_le" [drivers/staging/rtl8192u/r8192u_usb.ko] undefined!
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210103214034.1995821-1-arnd@kernel.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

According to the binding documentation pinctrl related nodes
must use '-pins$' and ''^(.*-)?pinmux$'' as names. Change all
to properly match them. Also default state is for consumer
nodes and shall be removed from here.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210104150651.32083-1-sergio.paracuellos@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This comment describes a security problem which was fixed in commit
1c954540 ("staging: vchiq: avoid mixing kernel and user pointers").
The bug is fixed now so the FIXME can be removed.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X/RnUjY3XkZohk7w@mwandaSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use kzalloc rather than kcalloc(1,...)

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
@@

- kcalloc(1,
+ kzalloc(
          ...)
// </smpl>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201230013706.28698-1-zhengyongjun3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 850c35bb as it
breaks the build.

Cc: Song Chen <chensong_2000@189.cn>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210104122653.6f35b9bb@canb.auug.org.auSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are certain conditional expressions in rtl8192e, where a boolean
variable is compared with true/false, in forms such as (foo == true) or
(false != bar), which does not comply with checkpatch.pl (CHECK:
BOOL_COMPARISON), according to which boolean variables should be
themselves used in the condition, rather than comparing with true/false

E.g. in drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c,
"if (Type == true)" can be replaced with: "if (Type)"

Replace all such expressions with the bool variables appropriately
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Link: https://lore.kernel.org/r/20201220194224.12835-1-yashsri421@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When fw_core_add_address_handler() fails, we need to destroy
the port by tty_port_destroy(). Also we need to unregister
the address handler by fw_core_remove_address_handler() on
failure.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201221122437.10274-1-dinghao.liu@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is an allocation for priv->rx_urb[16] has no null check,
which may lead to a null pointer dereference.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20201226080258.6576-1-dinghao.liu@zju.edu.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Macro is not supposed to have flow control in it's
statement, remove.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Link: https://lore.kernel.org/r/1608890085-1267-1-git-send-email-chensong_2000@189.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A paragraph to describe what CONFIG_STAGING_BOARD is for,
to help developers have better understanding.
Signed-off-by: Song Chen <chensong_2000@189.cn>
Link: https://lore.kernel.org/r/1608889958-32118-1-git-send-email-chensong_2000@189.cnSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201224132528.31558-1-zhengyongjun3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20201224132519.31504-1-zhengyongjun3@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix all the braces coding style issues found by checkpatch.pl in
rtw_security.c.
Signed-off-by: Brother Matthew De Angelis <matthew.v.deangelis@gmail.com>
Link: https://lore.kernel.org/r/20201211222845.GA543167@aSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add SLAB_RECLAIM_ACCOUNT to ashmem_range cache since it has registered
shrinker, which make memAvailable more presiced.
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Zhaoyang Huang <zhaoyang.huang@unisoc.com>
Link: https://lore.kernel.org/r/1608277668-3740-1-git-send-email-huangzhaoyang@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 36e2c742 ("fs: don't allow splice read/write without
explicit ops") we've required that file operation structures explicitly
enable splice support, rather than falling back to the default handlers.

Most /proc files use the indirect 'struct proc_ops' to describe their
file operations, and were fixed up to support splice earlier in commits
40be821d..b24c30c6, but the mountinfo files interact with the
VFS directly using their own 'struct file_operations' and got missed as
a result.

This adds the necessary support for splice to work for /proc/*/mountinfo
and friends.
Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull NTB fixes from Jon Mason:
 "Bug fix for IDT NTB and Intel NTB LTR management support"

* tag 'ntb-5.11' of git://github.com/jonmason/ntb:
  ntb: intel: add Intel NTB LTR vendor support for gen4 NTB
  ntb: idt: fix error check in ntb_hw_idt.c

Pull crypto fixes from Herbert Xu:
 "Fix a number of autobuild failures due to missing Kconfig
  dependencies"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: qat - add CRYPTO_AES to Kconfig dependencies
  crypto: keembay - Add dependency on HAS_IOMEM
  crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY

Pull objtool fix from Ingo Molnar:
 "Fix a segfault that occurs when built with Clang"

* tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix seg fault with Clang non-section symbols

Pull locking fixes from Ingo Molnar:
 "Misc fixes/updates:

   - Fix static keys usage in module __init sections

   - Add separate MAINTAINERS entry for static branches/calls

   - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing"

* tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  softirq: Avoid bad tracing / lockdep interaction
  jump_label/static_call: Add MAINTAINERS
  jump_label: Fix usage in module __init

Pull timer fixes from Ingo Molnar:
 "Update/fix two CPU sanity checks in the hotplug and the boot code, and
  fix a typo in the Kconfig help text.

  [ Context: the first two commits are the result of an ongoing
    annotation+review work of (intentional) tick_do_timer_cpu() data
    races reported by KCSAN, but the annotations aren't fully cooked
    yet ]"

* tag 'timers-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timekeeping: Fix spelling mistake in Kconfig "fullfill" -> "fulfill"
  tick/sched: Remove bogus boot "safety" check
  tick: Remove pointless cpu valid check in hotplug code

Pull scheduler fix from Ingo Molnar:
 "Fix a context switch performance regression"

* tag 'sched-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Optimize finish_lock_switch()

Commit c9a3c4e6 ("mfd: ab8500-debugfs: Remove extraneous curly
brace") removed a left-over curly brace that caused build failures, but
Joe Perches points out that the subsequent 'seq_putc()' should also be
removed, because the commit that caused all these problems already added
the final '\n' to the seq_printf() above it.
Reported-by: Joe Perches <joe@perches.com>
Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull PCI fixes from Bjorn Helgaas:

 - Fix a tegra enumeration regression (Rob Herring)

 - Fix a designware-host check that warned on *success*, not failure
   (Alexander Lobakin)

* tag 'pci-v5.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: dwc: Fix inverted condition of DMA mask setup warning
  PCI: tegra: Fix host link initialization

Clang errors:

  drivers/mfd/ab8500-debugfs.c:1526:2: error: non-void function does not return a value [-Werror,-Wreturn-type]
          }
          ^
  drivers/mfd/ab8500-debugfs.c:1528:2: error: expected identifier or '('
  return 0;
          ^
  drivers/mfd/ab8500-debugfs.c:1529:1: error: extraneous closing brace ('}')
  }
  ^
  3 errors generated.

The cleanup in ab8500_interrupts_show left a curly brace around, remove
it to fix the error.

Fixes: 886c8121 ("mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address
allocation") added dma_mask_set() call to explicitly set 32-bit DMA mask
for MSI message mapping, but for now it throws a warning on ret == 0, while
dma_set_mask() returns 0 in case of success.

Fix this by inverting the condition.

[bhelgaas: join string to make it greppable]
Fixes: 660c4865 ("PCI: dwc: Set 32-bit DMA mask for MSI target address allocation")
Link: https://lore.kernel.org/r/20201222150708.67983-1-alobakin@pm.meSigned-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Commit b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common
code") broke enumeration of downstream devices on Tegra:

In non-working case (next-20201211):

  0001:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: NVIDIA Corporation Device 1ad0 (rev a1)

In working case (v5.10-rc7):

  0001:00:00.0 PCI bridge: Molex Incorporated Device 1ad2 (rev a1)
  0001:01:00.0 SATA controller: Marvell Technology Group Ltd. Device 9171 (rev 13)
  0005:00:00.0 PCI bridge: Molex Incorporated Device 1ad0 (rev a1)
  0005:01:00.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:02:02.0 PCI bridge: PLX Technology, Inc. Device 3380 (rev ab)
  0005:03:00.0 USB controller: PLX Technology, Inc. Device 3380 (rev ab)

The problem seems to be dw_pcie_setup_rc() is now called twice before and
after the link up handling. The fix is to move Tegra's link up handling to
.start_link() function like other DWC drivers. Tegra is a bit more
complicated than others as it re-inits the whole DWC controller to retry
the link. With this, the initialization ordering is restored to match the
prior sequence.

Fixes: b9ac0f9d ("PCI: dwc: Move dw_pcie_setup_rc() to DWC common code")
Link: https://lore.kernel.org/r/20201218143905.1614098-1-robh@kernel.orgReported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Vidya Sagar <vidyas@nvidia.com>

clang (quite rightly) complains fairly loudly about the newly added
mpc1_get_mpc_out_mux() function returning an uninitialized value if the
'opp_id' checks don't pass.

This may not happen in practice, but the code really shouldn't return
garbage if the sanity checks don't pass.

So just initialize 'val' to zero to avoid the issue.

Fixes: 110b055b ("drm/amd/display: add getter routine to retrieve mpcc mux")
Cc: Josip Pavic <Josip.Pavic@amd.com>
Cc: Bindu Ramamurthy <bindu.r@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Refactor 'perf stat' per CPU/socket/die/thread aggregation fixing use
   cases in ARM machines.

 - Fix memory leak when synthesizing SDT probes in 'perf probe'.

 - Update kernel header copies related to KVM, epol_pwait. msr-index and
   powerpc and s390 syscall tables.

* tag 'perf-tools-2020-12-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (24 commits)
  perf probe: Fix memory leak when synthesizing SDT probes
  perf stat aggregation: Add separate thread member
  perf stat aggregation: Add separate core member
  perf stat aggregation: Add separate die member
  perf stat aggregation: Add separate socket member
  perf stat aggregation: Add separate node member
  perf stat aggregation: Start using cpu_aggr_id in map
  perf cpumap: Drop in cpu_aggr_map struct
  perf cpumap: Add new map type for aggregation
  perf stat: Replace aggregation ID with a struct
  perf cpumap: Add new struct for cpu aggregation
  perf cpumap: Use existing allocator to avoid using malloc
  perf tests: Improve topology test to check all aggregation types
  perf tools: Update s390's syscall.tbl copy from the kernel sources
  perf tools: Update powerpc's syscall.tbl copy from the kernel sources
  perf s390: Move syscall.tbl check into check-headers.sh
  perf powerpc: Move syscall.tbl check to check-headers.sh
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools kvm headers: Update KVM headers from the kernel sources
  tools headers UAPI: Sync KVM's vmx.h header with the kernel sources
  ...

Pull coccinelle updates from Julia Lawall.

* 'for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: Correct usage of make coccicheck
  coccinelle: update expiring email addresses
  coccinnelle: Remove ptr_ret script
  kbuild: do not use scripts/ld-version.sh for checking spatch version
  remove boolinit.cocci

Commit 64a1b95b ("genirq: Restrict export of irq_to_desc()") removed
the export of irq_to_desc() unless powerpc KVM is being built, because
there is still a use of irq_to_desc() in modular code there.

However it used:

  #ifdef CONFIG_KVM_BOOK3S_64_HV

Which doesn't work when that symbol is =m, leading to a build failure:

  ERROR: modpost: "irq_to_desc" [arch/powerpc/kvm/kvm-hv.ko] undefined!

Fix it by checking for the definedness of the correct symbol which is
CONFIG_KVM_BOOK3S_64_HV_MODULE.

Fixes: 64a1b95b ("genirq: Restrict export of irq_to_desc()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull misc vfs updates from Al Viro:
 "Assorted patches from previous cycle(s)..."

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix hostfs_open() use of ->f_path.dentry
  Make sure that make_create_in_sticky() never sees uninitialized value of dir_mode
  fs: Kill DCACHE_DONTCACHE dentry even if DCACHE_REFERENCED is set
  fs: Handle I_DONTCACHE in iput_final() instead of generic_drop_inode()
  fs/namespace.c: WARN if mnt_count has become negative

Pull documentation fixes from Jonathan Corbet:
 "A small set of late-arriving, small documentation fixes"

* tag 'docs-5.11-2' of git://git.lwn.net/linux:
  docs: admin-guide: Fix default value of max_map_count in sysctl/vm.rst
  Documentation/submitting-patches: Document the SoB chain
  Documentation: process: Correct numbering
  docs: submitting-patches: Trivial - fix grammatical error