reinit_notify() callback can be used by the UFS controller drivers to
perform changes required for UFSHCD reinit that can happen during max gear
switch.

Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not used
anywhere, it is safe to use the new name.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Make use of dev_err_probe() for printing the probe error.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Use bitfield macros where appropriate to simplify the driver.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

In the reset assert and deassert callbacks, the supplied "id" is not used
at all and only the HBA reset is performed all the time. So there is no
reason to use a WARN_ON() on the "id".
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A goto statement in an error path is useful if the function needs to do
cleanup other than returning the error code. But in this driver, goto
statements are used for just returning the error code in many places. This
really makes it hard to read the code.

Get rid of those goto statements and just return the error code directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Arthur Simchaev <Arthur.Simchaev@wdc.com> says:

Read any descriptor with a maximum size of QUERY_DESC_MAX_SIZE.
According to the spec the device returns the actual size.  Thus can
improve code readability and save CPU cycles.  While at it, clean up
few leftovers around the descriptor size parameter.

Link: https://lore.kernel.org/r/1670763911-8695-1-git-send-email-Arthur.Simchaev@wdc.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There shouldn't be any restriction of the descriptor size (not the
descriptor id for that matter) up to QUERY_DESC_MAX_SIZE.  According to the
spec, the caller can use any descriptor size, and it is up to the device to
return the actual size.  Therefore there shouldn't be any sizes hardcoded
in the kernel, nor any need to cache it, hence the
ufshcd_map_desc_id_to_length() function is redundant. Always read the
descriptors with QUERY_DESC_MAX_SIZE size.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Suggested-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

len argument is not used anymore in ufshcd_set_active_icc_lvl() function.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Always read the descriptor with QUERY_DESC_MAX_SIZE.  According to the
spec, the device returns the actual size.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We used to use the extended-feature field in the device descriptor as an
indication that the device supported UFS 2.2 or later.  Remove that as this
check is specifically done few lines above.
Signed-off-by: Arthur Simchaev <Arthur.Simchaev@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Bart Van Assche <bvanassche@acm.org> says:

The patches in this series are a first step towards integrating
support in the upstream kernel for the UFS controller in the Pixel 6
and 7.

[mkp: resolve conflict with RPMB series]

Link: https://lore.kernel.org/r/20221208234358.252031-1-bvanassche@acm.orgSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Modify the UFSHCD core to allow 'struct ufshcd_sg_entry' to be
variable-length. The default is the standard length, but variants can
override ufs_hba::sg_entry_size with a larger value if there are
vendor-specific fields following the standard ones.

This is needed to support inline encryption with ufs-exynos (FMP).

Cc: Eric Biggers <ebiggers@google.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
[ bvanassche: edited commit message and introduced CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE ]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Prepare for adding an additional ufshcd_clock_scaling_prepare() call with a
different timeout.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Wait at most 20 ms before rechecking the doorbells instead of waiting for a
potentially long time between doorbell checks.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Andrew Halaney <ahalaney@redhat.com> says:

This patch series attempts to clean up some debug code paths in the
ufs-qcom driver.

Link: https://lore.kernel.org/r/20221201230810.1019834-1-ahalaney@redhat.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

dev_err() statements are better to use than pr_err(), so switch to those.

In a similar vein, the check on the dev_req_params pointer here is not
needed, the two places this function is called never pass in a NULL
pointer, so instead of using dev_err() there just remove it.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This bitmask is unconditionally set in the current driver, so all
conditionals using it can be considered bit rot.

Let's take the current default conditional path everywhere and remove
dbg_print_en from the driver.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The current implementation has abstractions that don't give any benefits.

The print_fn callback (and its only callback implementation,
ufs_qcom_dump_regs_wrapper()) was only used by
ufs_qcom_print_hw_debug_reg_all() and just multiplies len by 4 before
calling ufshcd_dump_regs().

ufs_qcom_print_hw_debug_reg_all() is only called by
ufs_qcom_dump_dbg_regs().

There's no real gain in those abstractions, so let's just do the work
directly in ufs_qcom_dump_dbg_regs() (the dbg_register_dump callback).
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

This code path is only called through one function, and the HBA struct is
already accessed in ufshcd_vops_dbg_register_dump() prior to calling so
there is no way for it to be NULL.

Likewise, the print_fn callback is always supplied within this driver and
is always provided.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Bean Huo <beanhuo@iokpp.de> says:

This series of changes is to add support for UFS advanced RPMB in
ufs_bsg. The advanced RPMB application of user space is ufs_utils, the
reference code is at:

  https://github.com/beanhuo/ufs-utils-Micron/blob/ufs_arpmb/ufs_arpmb.c.

Changes to ufs_utils will be pushed to:

  https://github.com/westerndigitalcorporation/ufs-utils

Link: https://lore.kernel.org/r/20221201140437.549272-1-beanhuo@iokpp.deSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Add advanced RPMB support in ufs_bsg:

 1. According to the UFS specification, only one RPMB operation can be
    performed at any time. We can ensure this by using reserved slot and
    its dev_cmd sync operation protection mechanism.

 2. For Advanced RPMB, RPMB metadata is packaged in an EHS (Extra Header
    Segment) of a command UPIU, and the corresponding reply EHS (from the
    device) should also be returned to the user space.  bsg_job->request
    and bsg_job->reply allow us to pass and return EHS from/back to
    userspace.

Compared to normal/legacy RPMB, the advantages of advanced RPMB are:

 1. The data length in the Advanced RPMB data read/write command can be
    larger than 4KB. For the legacy RPMB, the data length in a single RPMB
    data transfer is 256 bytes.

 2. All of the advanced RPMB operations will be a single command. For
    legacy RPMB, take the read write-counter value as an example, you need
    two commands (first SECURITY PROTOCOL OUT, then second SECURITY
    PROTOCOL IN).
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

We need to fill in the total EHS length in UTP Transfer Request Descriptor.
Add this functionality to ufshcd_prepare_req_desc_hdr().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Check UFS Advanced RPMB LU enablement during ufshcd_lu_init().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Take out the "map scatter-gather list to prdt" part of the code in
ufshcd_map_sg() and split it into a new function ufshcd_sgl_to_prdt().
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Move sg_copy_from_buffer() below its associated case statement.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Remove checks on job->request_len and job->reply_len because msgcode checks
in a subseqent commit will rule out malicious requests.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Acked-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

According to the comments in struct ufs_bsg_reply and its usage, the result
should be signed int, not __u32.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Jason Yan <yanaijie@huawei.com> says:

A few coding style fixes and cleanups. There should be no functional
changes in this series besides the debug log prints.

Link: https://lore.kernel.org/r/20221214133808.1649122-1-yanaijie@huawei.comSigned-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Factor out sas_ex_add_dev() to be consistent with sas_ata_add_dev() and
unify the error handling.

Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Factor out sas_ata_add_dev() and put it in sas_ata.c since it is a SATA
related interface. Also follow the standard coding style to define an
inline empty function when CONFIG_SCSI_SAS_ATA is not enabled.

Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The domain device 'child' is allocated in sas_ex_discover_end_dev() and
used to be added to the dev_list in this function. After the following two
fixes the device is added to the disco_list instead. As a result, the
list_del() and locking left behind is now redundant.

Fixes: 87c8331f ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling")
Fixes: 92625f9b ("[SCSI] libsas: restore scan order")
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

The coding style where calling this interface is inconsistent with other
interfaces for SATA devices. The standard style for other SATA interfaces
is like:

    #ifdefine CONFIG_SCSI_SAS_ATA
    void sas_ata_task_abort(struct sas_task *task);
    #else
    static inline void sas_ata_task_abort(struct sas_task *task)
    {
    }
    #endif

And the callers does not have to do things like "#ifdefine CONFIG_SCSI_SAS_ATA"
and may call the interface directly. So follow the standard style here.

Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

There is a sas_get_ata_command_set() declaration above sas_get_ata_info()
to make it compile. However, this function is defined in the same
file. Move it up to save the forward declaration.

Also remove the variable 'fis' which is not needed in this function.

Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active

Merge tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two core fixes here, one for a long standing race which some Qualcomm
  systems have started triggering with their UFS driver and another
  fixing a problem with supply lookup introduced by the fixes for devm
  related use after free issues that were introduced in this merge
  window"

* tag 'regulator-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: core: fix deadlock on regulator enable
  regulator: core: Fix resolve supply lookup issue

Pull coccicheck update from Julia Lawall:
 "Modernize use of grep in coccicheck:

  Use 'grep -E' instead of 'egrep'"

* tag 'coccinelle-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  scripts: coccicheck: use "grep -E" instead of "egrep"

Pull kernel hardening fixes from Kees Cook:

 - Fix CFI failure with KASAN (Sami Tolvanen)

 - Fix LKDTM + CFI under GCC 7 and 8 (Kristina Martsenko)

 - Limit CONFIG_ZERO_CALL_USED_REGS to Clang > 15.0.6 (Nathan
   Chancellor)

 - Ignore "contents" argument in LoadPin's LSM hook handling

 - Fix paste-o in /sys/kernel/warn_count API docs

 - Use READ_ONCE() consistently for oops/warn limit reading

* tag 'hardening-v6.2-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  cfi: Fix CFI failure with KASAN
  exit: Use READ_ONCE() for all oops/warn limit reads
  security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6
  lkdtm: cfi: Make PAC test work with GCC 7 and 8
  docs: Fix path paste-o for /sys/kernel/warn_count
  LoadPin: Ignore the "contents" argument of the LSM hooks