- 05 Jul, 2011 40 commits
-
-
Arend van Spriel authored
the phy sources contained some code fragments for chipsets that are not supported by this driver, which have been removed. Signed-off-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Roland Vossen <rvossen@broadcom.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Arend van Spriel authored
The brcmsmac driver code contains code fragments for chipsets that are not supported. These have been removed from the brcmsmac source files. Signed-off-by:
-
Franky Lin authored
aiutils.c and pcicfg.h are no longer needed by fullmac Signed-off-by:
Franky Lin <frankyl@broadcom.com> Reviewed-by:
-
Franky Lin authored
Move sdio specific tx queue lock codes to dhd_sdio.c for fullmac Signed-off-by:
-
Franky Lin authored
Remove empty lock functions for sdio rx queue Signed-off-by:
-
Franky Lin authored
Unused sdtx lock functions are removed from dhd_linux.c Signed-off-by:
-
Arend van Spriel authored
The source file srom.c used meaningless non-zero numbers to return upon error conditions. These have been replaced by linux error codes. Signed-off-by:
-
Arend van Spriel authored
The error handling code labelled with errout: did a conditional kfree(). The last error jump to the label is upon failure of the kmalloc() for which the conditional kfree() is done. Therefor, the kfree is moved before the error label and done unconditionally. Signed-off-by:
-
Arend van Spriel authored
The function initvars_srom_pci() has fallback to obtain drivers settings from flash when no srom device is present. However, this driver does not support flash so the fallback code can be removed. Signed-off-by:
-
Sukesh Srikakula authored
'WL_STATUS_CONNECTING' status bit is set at appropriate step in bss/ibss connect requests. Signed-off-by:
Sukesh Srikakula <sukeshs@broadcom.com> Reviewed-by:
-
Arend van Spriel authored
The file types.h contains several occurrences of the checkpatch error "(foo*)" should be "(foo *)". This has been fixed in this patch. Signed-off-by:
-
Joe Perches authored
Commit b287db11 ("se401: remove last V4L1 driver") removed the files, remove the entry. cc: Hans Verkuil <hverkuil@xs4all.nl> cc: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Matthew Skolaut authored
Staging: comedi: das1800: fixed multiple brace coding style issues and pointer declaration style errors Fixed coding style issues Signed-off-by:
Matthew Skolaut <tech2077@gmail.com> Signed-off-by:
-
Ravishankar authored
This is a patch to the ni_daq_700.c file that fixes up a prink warning found by the checkpatch.pl tool Signed-off-by:
Ravishankar <ravishankarkm32@gmail.com> Signed-off-by:
-
Randy Dunlap authored
Fix ni_labpc.c to build when CONFIG_ISA_DMA_API is not enabled. This is a driver that supports both ISA and PCI devices. It now builds when for PCI-only support or for both ISA and PCI device support. (It does not support ISA-only without PCI.) Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by:
-
Vasiliy Kulikov authored
driver_name and board_name are pointers to strings, not buffers of size COMEDI_NAMELEN. Copying COMEDI_NAMELEN bytes of a string containing less than COMEDI_NAMELEN-1 bytes would leak some unrelated bytes. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Dan Carpenter authored
Smatch complains about a couple error paths where the semaphores were not released. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Prashant P. Shah authored
Add dyna_pci10xx entry to comedi Kconfig and Makefile Signed-off-by:
Prashant P. Shah <pshah.mumbai@gmail.com> Signed-off-by:
-
Prashant P. Shah authored
For Dynalog PCI DAQ cards: PCI-1050 Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Haiyang Zhang authored
Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Abhishek Kane <v-abkane@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Jesper Juhl authored
It was pointed out by 'make versioncheck' that include of linux/version.h is not needed in drivers/staging/hv/hv_timesource.c . This patch removes it. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
K. Y. Srinivasan authored
Properly handle the error in hv_acpi_init(). Signed-off-by:
-
K. Y. Srinivasan authored
The transmit slots were manipulated without proper locking. Fix this bug by making the variable tracking the transmit slots atomic. This patch should be ported to prior stable kernels 2.6.32 and later. Signed-off-by:
-
K. Y. Srinivasan authored
On some loaded windows hosts, we have discovered that the host may not respond to guest requests within the specified time (one second) as evidenced by the guest timing out. Fix this problem by increasing the timeout to 5 seconds. It may be useful to apply this patch to the 3.0 kernel as well. the 3.0 kernel as well. Signed-off-by:
-
K. Y. Srinivasan authored
On some loaded windows hosts, we have discovered that the host may not respond to guest requests within the specified time (one second) as evidenced by the guest timing out. Fix this problem by increasing the timeout to 5 seconds. It may be useful to apply this patch to the 3.0 kernel as well. Signed-off-by:
-
K. Y. Srinivasan authored
On some loaded windows hosts, we have discovered that the host may not respond to guest requests within the specified time (one second) as evidenced by the guest timing out. Fix this problem by increasing the timeout to 5 seconds. It may be useful to apply this patch to the 3.0 kernel as well. Signed-off-by:
-
Kalle Valo authored
The driver was removed but 'make clean' still failed: scripts/Makefile.clean:17: [...]/drivers/staging/cs5535_gpio/Makefile: No such file or directory make[3]: *** No rule to make target `[...]/drivers/staging/cs5535_gpio/Makefile'. Stop. Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
